3D Printing News
5S Mini print distortion issue resolved 0
A customer has issue with 5S mini printer. After inspecting the printer , the prints has either separation / or over extrusion . After checking his printer , we found out that the XY carriage bolts (front side) are loose, which lead to large play in XY carriage and cause this distortion . We have tighten the three bolts and the printer is printing very well .
XY Carriage for 5S Mini
ZYYX Print-head Assembly Procedure 0
Replacing PTFE Tube for the MK10 Extruder 0
Flashing Duplicator i3 controller Melzi 0Important Notice , The printer comes with flashed controller , you don't need to flash the firmware unless if required . Flashing the firmware without instructions from Wahnao (or DigitMakers.ca) will void the warranty on the printer. Work Instructions Arduino Marline Firmware
Wanhao Duplicator i3 Maintenance Information Package -2 0
1. How to replace wanhao Duplicator i3 cooling fan and themistor?
2-.How to Trim Printed objects ?
3- Printed spare parts for Wanhao i3 https://www.thingiverse.com/Drazen/collections/i3/page:1