{"id":5436894707874,"title":"D3D Carbon Fiber Reinforced ABS - 1.75mm 1KG","handle":"d3d-carbon-fiber-reinforced-abs-1-75mm-1kg","description":"\u003cp\u003eABS (Acrylonitrile Butadiene Styrene) is the grandfather of home 3D printing filaments. For best results, ABS requires a heated bed and preferably an enclosed printing environment.\u003c\/p\u003e\n\u003cp\u003eABS has a higher resistance to heat and starts to soften at around 105º C. For this reason, 3D printed objects used in outdoor or higher heat applications tend to stand up better when printed from ABS Filament.\u003c\/p\u003e\n\u003cp\u003eOne of the downsides to printing with ABS is the strong smell while it prints. While it doesn’t bother most people, some people may have issues with printing with ABS in confined spaces. We recommend printing in a well ventilated room.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications \u003c\/h4\u003e\n\u003ctable width=\"100%\" class=\"table-hover table table-bordered\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003ePhysical\u003c\/th\u003e\n\u003cth\u003eNominal Value Unit\u003c\/th\u003e\n\u003cth\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific Gravity\u003cbr\u003e--\u003cbr\u003e23°C\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e1.05 g\/cm³\u003cbr\u003e1.05 g\/cm³\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003eASTM D792\u003cbr\u003eISO 1183\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMelt Mass-Flow Rate (MFR)\u003cbr\u003e200°C\/5.0 kg\u003cbr\u003e220°C\/10.0 kg\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e1.6 g\/10 min\u003cbr\u003e22 g\/10 min\u003c\/td\u003e\n\u003ctd\u003eASTM D1238\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMelt Volume-Flow Rate (MVR) (220°C\/10.0 kg)\u003c\/td\u003e\n\u003ctd\u003e22.0 cm³\/10min\u003c\/td\u003e\n\u003ctd\u003eISO 1133\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical\u003c\/th\u003e\n\u003cth\u003eNominal Value Unit\u003c\/th\u003e\n\u003cth\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Stress\u003cbr\u003eYield\u003cbr\u003eBreak\u003cbr\u003e3.00 mm\u003csup\u003e4\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e54.0 MPa\u003cbr\u003e37.0 MPa\u003cbr\u003e45.1 MPa\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003eISO 527-2\/50\u003cbr\u003eISO 527-2\/50\u003cbr\u003eASTM D638\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Elongation\u003cbr\u003eBreak, 3.00 mm\u003csup\u003e4\u003c\/sup\u003e\u003cbr\u003eBreak\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e25 %\u003cbr\u003e20 %\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003eASTM D638\u003cbr\u003eISO 527-2\/50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Modulus\u003cbr\u003e6.00 mm\u003csup\u003e5\u003c\/sup\u003e\u003cbr\u003e--\u003csup\u003e6\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e2650 MPa\u003cbr\u003e2200 MPa\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003eASTM D790\u003cbr\u003eISO 178\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Strength\u003cbr\u003e6.00 mm\u003csup\u003e5\u003c\/sup\u003e\u003cbr\u003e--\u003csup\u003e6\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e77.5 MPa\u003cbr\u003e76.0 MPa\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003eASTM D790\u003cbr\u003eISO 178\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact\u003c\/th\u003e\n\u003cth\u003eNominal Value Unit\u003c\/th\u003e\n\u003cth\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharpy Notched Impact Strength\u003c\/td\u003e\n\u003ctd\u003e20 kJ\/m²\u003c\/td\u003e\n\u003ctd\u003eISO 179\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharpy Unnotched Impact Strength\u003c\/td\u003e\n\u003ctd\u003eNo Break\u003c\/td\u003e\n\u003ctd\u003eISO 179\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched Izod Impact\u003cbr\u003e23°C, 3.00 mm\u003cbr\u003e23°C, 6.00 mm\u003cbr\u003e--\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e210 J\/m\u003cbr\u003e180 J\/m\u003cbr\u003e18 kJ\/m²\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003eASTM D256\u003cbr\u003eASTM D256\u003cbr\u003eISO 180\/1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnnotched Izod Impact Strength\u003c\/td\u003e\n\u003ctd\u003e60 kJ\/m²\u003c\/td\u003e\n\u003ctd\u003eISO 180\/1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003cth\u003eNominal Value Unit\u003c\/th\u003e\n\u003cth\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRockwell Hardness (R-Scale)\u003c\/td\u003e\n\u003ctd\u003e116\u003c\/td\u003e\n\u003ctd\u003eASTM D785\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBall Indentation Hardness (H 358\/30)\u003c\/td\u003e\n\u003ctd\u003e110 MPa\u003c\/td\u003e\n\u003ctd\u003eISO 2039-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eThermal\u003c\/th\u003e\n\u003cth\u003eNominal Value Unit\u003c\/th\u003e\n\u003cth\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeflection Temperature Under Load\u003cbr\u003e1.8 MPa, Unannealed\u003cbr\u003e1.8 MPa, Unannealed\u003cbr\u003e1.8 MPa, Annealed\u003cbr\u003e1.8 MPa, Annealed\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e85.0°C\u003cbr\u003e88.0°C\u003cbr\u003e95.0°C\u003cbr\u003e98.0°C\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003eASTM D648\u003cbr\u003eISO 75-2\/A\u003cbr\u003eASTM D648\u003cbr\u003eISO 75-2\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVicat Softening Temperature\u003cbr\u003e--\u003cbr\u003e--\u003cbr\u003e--\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e105°C\u003cbr\u003e104°C\u003cbr\u003e100°C\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003eASTM D1525 7\u003cbr\u003eISO 306\/A50\u003cbr\u003eISO 306\/B50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFlammability\u003c\/th\u003e\n\u003cth\u003eNominal Value Unit\u003c\/th\u003e\n\u003cth\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlame Rating (1.60 mm)\u003c\/td\u003e\n\u003ctd\u003eHB\u003c\/td\u003e\n\u003ctd\u003eUL 94\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eInjection\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eNominal Value Unit\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying Temperature\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e80.0 to 85.0 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying Time\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e2.0 to 4.0 hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear Temperature\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e180 to 220 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMiddle Temperature\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e190 to 230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Temperature\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e190 to 230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMold Temperature\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e30.0 to 70.0 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2020-07-10T15:27:32-04:00","created_at":"2020-07-10T15:27:31-04:00","vendor":"D3D","type":"Filaments","tags":["3D Filament","3D Printer Filament","abs carbon fiber","abs carbonfiber","ABS Filament","Carbon Fiber","carbon fiber filament","D3D","d3d abs","Filament"],"price":4995,"price_min":4995,"price_max":4995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35078240567458,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"D3D-FL-ABS-CF-1.75MM-1KG","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"D3D Carbon Fiber Reinforced ABS - 1.75mm 1KG","public_title":null,"options":["Default Title"],"price":4995,"weight":2000,"compare_at_price":null,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"11000145"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/d3dcarbon.png?v=1594468216"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/d3dcarbon.png?v=1594468216","options":["Title"],"media":[{"alt":"D3D Carbon Fiber Reinforced ABS - 1.75mm 1KG - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":10064198205602,"position":1,"preview_image":{"aspect_ratio":1.308,"height":458,"width":599,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/d3dcarbon.png?v=1594412686"},"aspect_ratio":1.308,"height":458,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/d3dcarbon.png?v=1594412686","width":599}],"content":"\u003cp\u003eABS (Acrylonitrile Butadiene Styrene) is the grandfather of home 3D printing filaments. For best results, ABS requires a heated bed and preferably an enclosed printing environment.\u003c\/p\u003e\n\u003cp\u003eABS has a higher resistance to heat and starts to soften at around 105º C. For this reason, 3D printed objects used in outdoor or higher heat applications tend to stand up better when printed from ABS Filament.\u003c\/p\u003e\n\u003cp\u003eOne of the downsides to printing with ABS is the strong smell while it prints. While it doesn’t bother most people, some people may have issues with printing with ABS in confined spaces. We recommend printing in a well ventilated room.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications \u003c\/h4\u003e\n\u003ctable width=\"100%\" class=\"table-hover table table-bordered\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003ePhysical\u003c\/th\u003e\n\u003cth\u003eNominal Value Unit\u003c\/th\u003e\n\u003cth\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific Gravity\u003cbr\u003e--\u003cbr\u003e23°C\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e1.05 g\/cm³\u003cbr\u003e1.05 g\/cm³\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003eASTM D792\u003cbr\u003eISO 1183\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMelt Mass-Flow Rate (MFR)\u003cbr\u003e200°C\/5.0 kg\u003cbr\u003e220°C\/10.0 kg\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e1.6 g\/10 min\u003cbr\u003e22 g\/10 min\u003c\/td\u003e\n\u003ctd\u003eASTM D1238\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMelt Volume-Flow Rate (MVR) (220°C\/10.0 kg)\u003c\/td\u003e\n\u003ctd\u003e22.0 cm³\/10min\u003c\/td\u003e\n\u003ctd\u003eISO 1133\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical\u003c\/th\u003e\n\u003cth\u003eNominal Value Unit\u003c\/th\u003e\n\u003cth\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Stress\u003cbr\u003eYield\u003cbr\u003eBreak\u003cbr\u003e3.00 mm\u003csup\u003e4\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e54.0 MPa\u003cbr\u003e37.0 MPa\u003cbr\u003e45.1 MPa\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003eISO 527-2\/50\u003cbr\u003eISO 527-2\/50\u003cbr\u003eASTM D638\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Elongation\u003cbr\u003eBreak, 3.00 mm\u003csup\u003e4\u003c\/sup\u003e\u003cbr\u003eBreak\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e25 %\u003cbr\u003e20 %\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003eASTM D638\u003cbr\u003eISO 527-2\/50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Modulus\u003cbr\u003e6.00 mm\u003csup\u003e5\u003c\/sup\u003e\u003cbr\u003e--\u003csup\u003e6\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e2650 MPa\u003cbr\u003e2200 MPa\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003eASTM D790\u003cbr\u003eISO 178\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Strength\u003cbr\u003e6.00 mm\u003csup\u003e5\u003c\/sup\u003e\u003cbr\u003e--\u003csup\u003e6\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e77.5 MPa\u003cbr\u003e76.0 MPa\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003eASTM D790\u003cbr\u003eISO 178\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact\u003c\/th\u003e\n\u003cth\u003eNominal Value Unit\u003c\/th\u003e\n\u003cth\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharpy Notched Impact Strength\u003c\/td\u003e\n\u003ctd\u003e20 kJ\/m²\u003c\/td\u003e\n\u003ctd\u003eISO 179\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharpy Unnotched Impact Strength\u003c\/td\u003e\n\u003ctd\u003eNo Break\u003c\/td\u003e\n\u003ctd\u003eISO 179\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched Izod Impact\u003cbr\u003e23°C, 3.00 mm\u003cbr\u003e23°C, 6.00 mm\u003cbr\u003e--\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e210 J\/m\u003cbr\u003e180 J\/m\u003cbr\u003e18 kJ\/m²\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003eASTM D256\u003cbr\u003eASTM D256\u003cbr\u003eISO 180\/1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnnotched Izod Impact Strength\u003c\/td\u003e\n\u003ctd\u003e60 kJ\/m²\u003c\/td\u003e\n\u003ctd\u003eISO 180\/1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003cth\u003eNominal Value Unit\u003c\/th\u003e\n\u003cth\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRockwell Hardness (R-Scale)\u003c\/td\u003e\n\u003ctd\u003e116\u003c\/td\u003e\n\u003ctd\u003eASTM D785\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBall Indentation Hardness (H 358\/30)\u003c\/td\u003e\n\u003ctd\u003e110 MPa\u003c\/td\u003e\n\u003ctd\u003eISO 2039-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eThermal\u003c\/th\u003e\n\u003cth\u003eNominal Value Unit\u003c\/th\u003e\n\u003cth\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeflection Temperature Under Load\u003cbr\u003e1.8 MPa, Unannealed\u003cbr\u003e1.8 MPa, Unannealed\u003cbr\u003e1.8 MPa, Annealed\u003cbr\u003e1.8 MPa, Annealed\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e85.0°C\u003cbr\u003e88.0°C\u003cbr\u003e95.0°C\u003cbr\u003e98.0°C\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003eASTM D648\u003cbr\u003eISO 75-2\/A\u003cbr\u003eASTM D648\u003cbr\u003eISO 75-2\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVicat Softening Temperature\u003cbr\u003e--\u003cbr\u003e--\u003cbr\u003e--\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003e105°C\u003cbr\u003e104°C\u003cbr\u003e100°C\u003c\/td\u003e\n\u003ctd\u003e\n\u003cbr\u003eASTM D1525 7\u003cbr\u003eISO 306\/A50\u003cbr\u003eISO 306\/B50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFlammability\u003c\/th\u003e\n\u003cth\u003eNominal Value Unit\u003c\/th\u003e\n\u003cth\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlame Rating (1.60 mm)\u003c\/td\u003e\n\u003ctd\u003eHB\u003c\/td\u003e\n\u003ctd\u003eUL 94\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eInjection\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eNominal Value Unit\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying Temperature\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e80.0 to 85.0 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying Time\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e2.0 to 4.0 hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear Temperature\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e180 to 220 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMiddle Temperature\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e190 to 230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Temperature\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e190 to 230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMold Temperature\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e30.0 to 70.0 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}

D3D Carbon Fiber Reinforced ABS - 1.75mm 1KG

Product Description
$49.95 CAD
Maximum quantity available reached.

ABS (Acrylonitrile Butadiene Styrene) is the grandfather of home 3D printing filaments. For best results, ABS requires a heated bed and preferably an enclosed printing environment.

ABS has a higher resistance to heat and starts to soften at around 105º C. For this reason, 3D printed objects used in outdoor or higher heat applications tend to stand up better when printed from ABS Filament.

One of the downsides to printing with ABS is the strong smell while it prints. While it doesn’t bother most people, some people may have issues with printing with ABS in confined spaces. We recommend printing in a well ventilated room.

Physical Nominal Value Unit Test Method
Specific Gravity
--
23°C

1.05 g/cm³
1.05 g/cm³

ASTM D792
ISO 1183
Melt Mass-Flow Rate (MFR)
200°C/5.0 kg
220°C/10.0 kg

1.6 g/10 min
22 g/10 min
ASTM D1238
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg) 22.0 cm³/10min ISO 1133
Mechanical Nominal Value Unit Test Method
Tensile Stress
Yield
Break
3.00 mm4

54.0 MPa
37.0 MPa
45.1 MPa

ISO 527-2/50
ISO 527-2/50
ASTM D638
Tensile Elongation
Break, 3.00 mm4
Break

25 %
20 %

ASTM D638
ISO 527-2/50
Flexural Modulus
6.00 mm5
--6

2650 MPa
2200 MPa

ASTM D790
ISO 178
Flexural Strength
6.00 mm5
--6

77.5 MPa
76.0 MPa

ASTM D790
ISO 178
Impact Nominal Value Unit Test Method
Charpy Notched Impact Strength 20 kJ/m² ISO 179
Charpy Unnotched Impact Strength No Break ISO 179
Notched Izod Impact
23°C, 3.00 mm
23°C, 6.00 mm
--

210 J/m
180 J/m
18 kJ/m²

ASTM D256
ASTM D256
ISO 180/1A
Unnotched Izod Impact Strength 60 kJ/m² ISO 180/1U
Hardness Nominal Value Unit Test Method
Rockwell Hardness (R-Scale) 116 ASTM D785
Ball Indentation Hardness (H 358/30) 110 MPa ISO 2039-1
Thermal Nominal Value Unit Test Method
Deflection Temperature Under Load
1.8 MPa, Unannealed
1.8 MPa, Unannealed
1.8 MPa, Annealed
1.8 MPa, Annealed

85.0°C
88.0°C
95.0°C
98.0°C

ASTM D648
ISO 75-2/A
ASTM D648
ISO 75-2/A
Vicat Softening Temperature
--
--
--

105°C
104°C
100°C

ASTM D1525 7
ISO 306/A50
ISO 306/B50
Flammability Nominal Value Unit Test Method
Flame Rating (1.60 mm) HB UL 94
Injection Nominal Value Unit
Drying Temperature 80.0 to 85.0 °C
Drying Time 2.0 to 4.0 hr
Rear Temperature 180 to 220 °C
Middle Temperature 190 to 230 °C
Front Temperature 190 to 230 °C
Mold Temperature 30.0 to 70.0 °C
Sku: D3D-FL-ABS-CF-1.75MM-1KG
Vendor: D3D
Get a free quotation for the product of your interest today. Choose from a wide range of 3D Printers , 3D Scanners, 3D Printing Filaments , 3D Resin & 3D Printing parts today ! Contact us today !

Price Match

 Contact us here!

We match all competitors pricing!

You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you're getting honest value for your money.

Price match for retail store

We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor's store or website (including shipping, handling and fees, if applicable within Canada)

Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.

Price match for online only website

If you find an identical item for less at a Canadian online only website, we will match their price (including shipping, handling and fees, if applicable).

How to price match in-store:

When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor's website.

How to price match on DigitMakers.ca

Please Email : Sales@digitmakers.ca

Please make sure you have the following information before contacting us so that we can assist you as quickly as possible:

  • Your full name and phone number
  • The complete URL (web address) of product page on the competitor's website (Canada Only Accepted) 
  • Details of the product name, brand and model
  • Details of the price difference (including shipping, handling and other fees, if applicable)

 

Our goal is to provide everyday low prices on all of our Items 

Related Products