{"id":8058612299,"title":"Modifi3D PRINT FINISHING TOOL","handle":"3d-print-finishing-tool-modifi3d","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e\u003c\/strong\u003e is a unique heated pen with specially coated different shapes tips designed to finish, fix and modify 3D printed parts. MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e Is carefully designed to get ride of  much of the sanding, scraping and snapping to finish off your 3D prints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e\u003c\/strong\u003e makes it very comfortable to use and extremely easy to control when precision is important.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e\u003c\/strong\u003e works with PLA, ABS and other 3D printing materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"500\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/nwD55Mf8Qyw\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cp\u003eWith MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e finishing 3D prints should be easy . Simply plug in the USB, touch the switch and in less than 15 seconds you are ready to go. You will be able to remove any unwanted material or modify your print without having to redesign and print again!\u003c\/p\u003e\n\u003cp\u003ePlace on its stand and in 25 seconds it will go into sleep mode (a basic stand is included but you can print your own stand\/tool holder with our downloadable 3D file).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch5\u003eSTEP BY STEP\u003c\/h5\u003e\n\u003cp\u003e1. Remove the protective cap (if used) and place MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e on the included stand.\u003c\/p\u003e\n\u003cp\u003e2. Plug in the USB (USB 2.0 or 3.0 recommended).\u003c\/p\u003e\n\u003cp\u003e3. Touch the metal switch to start heating. A red light indicates that MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e is switched on.\u003c\/p\u003e\n\u003cp\u003e3. In less than 15 seconds MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e will reach around 300ºC (572ºF) and is ready for use. To increase the temperature or reach the maximum of 420-450ºC (788-842ºF) continue to touch the metal switch until the required temperature is reached.\u003c\/p\u003e\n\u003cp\u003e4. If MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e is not used for 25 seconds it will go into sleep mode (light will go out and the tip will start to cool). To wake MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e just gently touch the switch and the heating process will continue.\u003c\/p\u003e\n\u003cp\u003e5. Always unplug the USB if MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e is not being used.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch5\u003eQUICK CHANGE TIPS\u003c\/h5\u003e\n\u003cp\u003e1. To change tips unplug the USB and allow to cool fully.\u003c\/p\u003e\n\u003cp\u003e2. Unscrew the locking nut and pull out the tip\u003c\/p\u003e\n\u003cp\u003e3. Push the replacement tip in fully and tighten the locking nut\u003c\/p\u003e\n\u003cp\u003e4. Plug in the USB... Easy!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch5\u003eHOW TO CLEAN MODIFI3D TIPS\u003c\/h5\u003e\n\u003cp\u003eOver time you may want to clean the interchangeable tips. We recommend using a damp sponge to remove any plastic or residue from the tips. This works best whilst the tips are still warm (but obviously not hot enough to pose a risk of burning). \u003cb\u003ePlease ensure that the USB is unplugged and the tips have cooled to a safe temperature.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eDo not use abrasive cleaning products. This can damage the special coating on the tips.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.thingiverse.com\/thing:1185681\"\u003ePrint your own MODI3D STAND Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications : \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e5V 8W\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 or USB 3.0 recommended\u003c\/li\u003e\n\u003cli\u003eSize: 15mm (0.6\") x 117mm (4.6\") excluding tips\u003c\/li\u003e\n\u003cli\u003eWeight: 120g (4.3 oz)\u003c\/li\u003e\n\u003cli\u003eCable: 1.5m (59\") long to USB A plug\u003c\/li\u003e\n\u003cli\u003eHeats up to 300ºC (572ºF) in less than 15 seconds.\u003c\/li\u003e\n\u003cli\u003eMaximum temperature of 420-450ºC (788-842ºF)\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-01-29T12:27:00-05:00","created_at":"2017-01-29T12:27:04-05:00","vendor":"MODIFI3D","type":"Accessories","tags":["3d print finishing tool","accessories","Cleaning","Deal","Finishing Tools","Modifi3d"],"price":3999,"price_min":3999,"price_max":3999,"available":true,"price_varies":false,"compare_at_price":5800,"compare_at_price_min":5800,"compare_at_price_max":5800,"compare_at_price_varies":false,"variants":[{"id":26393876811,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MOD001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Modifi3D PRINT FINISHING TOOL","public_title":null,"options":["Default Title"],"price":3999,"weight":500,"compare_at_price":5800,"inventory_quantity":38,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Modifi3D-1.png?v=1575566391"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Modifi3D-1.png?v=1575566391","options":["Title"],"content":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e\u003c\/strong\u003e is a unique heated pen with specially coated different shapes tips designed to finish, fix and modify 3D printed parts. MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e Is carefully designed to get ride of  much of the sanding, scraping and snapping to finish off your 3D prints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e\u003c\/strong\u003e makes it very comfortable to use and extremely easy to control when precision is important.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e\u003c\/strong\u003e works with PLA, ABS and other 3D printing materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"500\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/nwD55Mf8Qyw\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cp\u003eWith MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e finishing 3D prints should be easy . Simply plug in the USB, touch the switch and in less than 15 seconds you are ready to go. You will be able to remove any unwanted material or modify your print without having to redesign and print again!\u003c\/p\u003e\n\u003cp\u003ePlace on its stand and in 25 seconds it will go into sleep mode (a basic stand is included but you can print your own stand\/tool holder with our downloadable 3D file).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch5\u003eSTEP BY STEP\u003c\/h5\u003e\n\u003cp\u003e1. Remove the protective cap (if used) and place MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e on the included stand.\u003c\/p\u003e\n\u003cp\u003e2. Plug in the USB (USB 2.0 or 3.0 recommended).\u003c\/p\u003e\n\u003cp\u003e3. Touch the metal switch to start heating. A red light indicates that MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e is switched on.\u003c\/p\u003e\n\u003cp\u003e3. In less than 15 seconds MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e will reach around 300ºC (572ºF) and is ready for use. To increase the temperature or reach the maximum of 420-450ºC (788-842ºF) continue to touch the metal switch until the required temperature is reached.\u003c\/p\u003e\n\u003cp\u003e4. If MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e is not used for 25 seconds it will go into sleep mode (light will go out and the tip will start to cool). To wake MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e just gently touch the switch and the heating process will continue.\u003c\/p\u003e\n\u003cp\u003e5. Always unplug the USB if MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e is not being used.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch5\u003eQUICK CHANGE TIPS\u003c\/h5\u003e\n\u003cp\u003e1. To change tips unplug the USB and allow to cool fully.\u003c\/p\u003e\n\u003cp\u003e2. Unscrew the locking nut and pull out the tip\u003c\/p\u003e\n\u003cp\u003e3. Push the replacement tip in fully and tighten the locking nut\u003c\/p\u003e\n\u003cp\u003e4. Plug in the USB... Easy!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch5\u003eHOW TO CLEAN MODIFI3D TIPS\u003c\/h5\u003e\n\u003cp\u003eOver time you may want to clean the interchangeable tips. We recommend using a damp sponge to remove any plastic or residue from the tips. This works best whilst the tips are still warm (but obviously not hot enough to pose a risk of burning). \u003cb\u003ePlease ensure that the USB is unplugged and the tips have cooled to a safe temperature.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eDo not use abrasive cleaning products. This can damage the special coating on the tips.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.thingiverse.com\/thing:1185681\"\u003ePrint your own MODI3D STAND Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications : \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e5V 8W\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 or USB 3.0 recommended\u003c\/li\u003e\n\u003cli\u003eSize: 15mm (0.6\") x 117mm (4.6\") excluding tips\u003c\/li\u003e\n\u003cli\u003eWeight: 120g (4.3 oz)\u003c\/li\u003e\n\u003cli\u003eCable: 1.5m (59\") long to USB A plug\u003c\/li\u003e\n\u003cli\u003eHeats up to 300ºC (572ºF) in less than 15 seconds.\u003c\/li\u003e\n\u003cli\u003eMaximum temperature of 420-450ºC (788-842ºF)\u003c\/li\u003e\n\u003c\/ul\u003e"}

Modifi3D PRINT FINISHING TOOL

Product Description
$39.99 CAD $58.00 CAD
Maximum quantity available reached.

 

MODIFI3D is a unique heated pen with specially coated different shapes tips designed to finish, fix and modify 3D printed parts. MODIFI3D Is carefully designed to get ride of  much of the sanding, scraping and snapping to finish off your 3D prints.

 MODIFI3D makes it very comfortable to use and extremely easy to control when precision is important.

MODIFI3D works with PLA, ABS and other 3D printing materials.

 

    With MODIFI3D finishing 3D prints should be easy . Simply plug in the USB, touch the switch and in less than 15 seconds you are ready to go. You will be able to remove any unwanted material or modify your print without having to redesign and print again!

    Place on its stand and in 25 seconds it will go into sleep mode (a basic stand is included but you can print your own stand/tool holder with our downloadable 3D file).

    STEP BY STEP

    1. Remove the protective cap (if used) and place MODIFI3D on the included stand.

    2. Plug in the USB (USB 2.0 or 3.0 recommended).

    3. Touch the metal switch to start heating. A red light indicates that MODIFI3D is switched on.

    3. In less than 15 seconds MODIFI3D will reach around 300ºC (572ºF) and is ready for use. To increase the temperature or reach the maximum of 420-450ºC (788-842ºF) continue to touch the metal switch until the required temperature is reached.

    4. If MODIFI3D is not used for 25 seconds it will go into sleep mode (light will go out and the tip will start to cool). To wake MODIFI3D just gently touch the switch and the heating process will continue.

    5. Always unplug the USB if MODIFI3D is not being used.

    QUICK CHANGE TIPS

    1. To change tips unplug the USB and allow to cool fully.

    2. Unscrew the locking nut and pull out the tip

    3. Push the replacement tip in fully and tighten the locking nut

    4. Plug in the USB... Easy!

    HOW TO CLEAN MODIFI3D TIPS

    Over time you may want to clean the interchangeable tips. We recommend using a damp sponge to remove any plastic or residue from the tips. This works best whilst the tips are still warm (but obviously not hot enough to pose a risk of burning). Please ensure that the USB is unplugged and the tips have cooled to a safe temperature.

    Do not use abrasive cleaning products. This can damage the special coating on the tips.

    Print your own MODI3D STAND Here

     

    • 5V 8W
    • USB 2.0 or USB 3.0 recommended
    • Size: 15mm (0.6") x 117mm (4.6") excluding tips
    • Weight: 120g (4.3 oz)
    • Cable: 1.5m (59") long to USB A plug
    • Heats up to 300ºC (572ºF) in less than 15 seconds.
    • Maximum temperature of 420-450ºC (788-842ºF)
    Sku: MOD001
    Vendor: MODIFI3D

    Price Match

     Contact us here!

    We match all competitors pricing!

    You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you're getting honest value for your money.

    Price match for retail store

    We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor's store or website (including shipping, handling and fees, if applicable within Canada)

    Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.

    Price match for online only website

    If you find an identical item for less at a Canadian online only website, we will match their price (including shipping, handling and fees, if applicable).

    How to price match in-store:

    When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor's website.

    How to price match on DigitMakers.ca

    Please Email : Sales@digitmakers.ca

    Please make sure you have the following information before contacting us so that we can assist you as quickly as possible:

    • Your full name and phone number
    • The complete URL (web address) of product page on the competitor's website (Canada Only Accepted) 
    • Details of the product name, brand and model
    • Details of the price difference (including shipping, handling and other fees, if applicable)

     

    Our goal is to provide everyday low prices on all of our Items 

    Related Products