{"id":9716485899,"title":"Fun To Do - Castable Blend","handle":"fun-to-do-castable-blend","description":"\u003cp\u003e\u003cspan\u003eThe Castable Blend has been designed to cast your pieces in bronze, copper, tin or iron using standard vacuum investment casting methods and settings. It is an Ideal resin for casting pieces of art, Toy models, machine parts. The fully cured resin has a hardness of 73 shore D.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable in Red only.\u003c\/p\u003e\n\u003cdiv class=\"twpara-row row-fluid\"\u003e\n\u003cdiv id=\"1vH3Wjy6\" class=\"span12 tw-para twps-panel\"\u003e\n\u003ch2\u003eResin Properties\u003c\/h2\u003e\n\u003cdiv class=\"ptext\"\u003e\n\u003cp\u003e\u003cstrong\u003eAll Fun To Do resins are designed to be ultra fast! \u003c\/strong\u003e\u003cbr\u003eCuring times of \u003cstrong\u003e0.5 \u003c\/strong\u003eseconds for 0.02mm layers are easily achieved on standard DLP printers with an average light source of around 240Watts.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eA broad range of reactivity!\u003c\/strong\u003e\u003cbr\u003eThe resin have a very broad range of reactivity. It extends from the very short wavelengths of 225nm, to the near\/visible wavelengths of 415nm. By incorporating a very smart blend of photo initiators and sensitizers, almost any light source can be used to initiate the polymerization process of our resins. No need to modify your expensive DLP projector! Do you have a laser SLA machine, or perhaps a DLP printer with a LED source of illumination? As long as the wavelength is \u003cstrong\u003ebetween 225nm and 415nm\u003c\/strong\u003e, it will work, and it will work \u003cstrong\u003efast!\u003c\/strong\u003e\u003cbr\u003eBesides the wavelength of the light source several other factors are important, so please check out the \u003ca id=\"lnk1-1vH3Wjy6\" href=\"http:\/\/www.funtodo.net\/properties.html\" target=\"_blank\" data-linkurl=\"properties.html\" rel=\"noopener noreferrer\"\u003eproperties page\u003c\/a\u003e. If you are in doubt if your specific machine is compatible with our resins, just send an \u003ca id=\"lnk4-1vH3Wjy6\" href=\"mailto:info@funtodo.net\" target=\"_blank\" data-linkurl=\"mailto:info@funtodo.net\" rel=\"noopener noreferrer\"\u003ee-mail\u003c\/a\u003e to Fun To Do.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Fun To Do resins have an ultra low shrinkage! \u003c\/strong\u003e\u003cbr\u003eWhere 3.5% is regarded little shrinkage, they have the limited the shrinkage to \u003cstrong\u003e0.5%\u003c\/strong\u003e. \u003cbr\u003eIt is basically what you see is what you get. 3.5% seems to be little but if you take an object of 10cm (100mm) 3.5% is 3.5 mm which is nearly half a centimetre! This is huge compared to the 0.5mm the Fun To Do Resins achieve.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eA natural resistance to water and most chemicals!\u003c\/strong\u003e\u003cbr\u003eFun To Do resins have a natural resistance against water - in liquid form it is highly hydrophobic. Once fully cured there is hardly any chemical that can dissolve Fun To Do resins. The Industrial blend has a \u003cstrong\u003ehigh resistance\u003c\/strong\u003e \u003cstrong\u003eto chemicals\u003c\/strong\u003e. Cured prints have been withstanding the elements and various chemicals for several years now! To see which chemicals have been tested click \u003ca id=\"lnk2-1vH3Wjy6\" href=\"http:\/\/www.funtodo.net\/properties.html#45dbz5qV\" target=\"_blank\" data-linkurl=\"properties.html#45dbz5qV\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e​User Friendliness makes you want to build more!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e​When designing the resins we have spent quite some effort in making the resin as user friendly as possible. These efforts have resulted in a series of \u003cstrong\u003elow odor\u003c\/strong\u003e resins with \u003cstrong\u003eminimal skin irritation\u003c\/strong\u003e.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAffordable resins make it possible for you to build more!\u003c\/strong\u003e\u003cbr\u003eBy using our affordable resin you can afford to experiment, extend your knowledge about supports, exposure times, material thickness without having to think about the costs of the materials all the time.\u003cbr\u003e\u003cbr\u003e\u003ca id=\"lnk3-1vH3Wjy6\" href=\"http:\/\/www.funtodo.net\/properties.html\" target=\"_blank\" data-linkurl=\"properties.html\" rel=\"noopener noreferrer\"\u003eMore technical details and properties\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"twpara-row row-fluid\"\u003e\n\u003cdiv id=\"w8QkYoGb\" class=\"span12 tw-para \"\u003e\n\u003ch2\u003eExperience\u003c\/h2\u003e\n\u003cdiv class=\"ptext\"\u003e\n\u003cp\u003eYears of studying and practising poly chemistry in various disciplines really pays off in the design of practical and affordable resins. Fun To Do resins are not only used in the DLP 3D printing world, but are also popular in the SLA industry. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRapid Prototyping\u003c\/li\u003e\n\u003cli\u003eAutomotive industry\u003c\/li\u003e\n\u003cli\u003eArchitecture\u003c\/li\u003e\n\u003cli\u003eModelling\u003c\/li\u003e\n\u003cli\u003eToy and Game industry\u003c\/li\u003e\n\u003cli\u003eProduction\u003c\/li\u003e\n\u003cli\u003eDental industry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1kg of Fun To Do Castable Blend resin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv class=\"twpara-row row-fluid\"\u003e\n\u003cdiv id=\"w8QkYoGb\" class=\"span12 tw-para \"\u003e\n\u003cdiv class=\"ptext\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-29T12:28:00-05:00","created_at":"2017-08-04T15:56:00-04:00","vendor":"Fun To Do","type":"Resin","tags":["3D printer resin","D7","DLP","draken","Duplicator 7","FunToDo","new-arrivals","Resin","resin 3dprinter","SLA"],"price":10900,"price_min":10900,"price_max":10900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36100469131,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DLPR003-CB-Blend","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fun To Do - Castable Blend","public_title":null,"options":["Default Title"],"price":10900,"weight":1500,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10000956"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/fun-to-do-castable-blend-3d-printer-resin__88171.1491287497.190.250.jpg?v=1571439472"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/fun-to-do-castable-blend-3d-printer-resin__88171.1491287497.190.250.jpg?v=1571439472","options":["Title"],"content":"\u003cp\u003e\u003cspan\u003eThe Castable Blend has been designed to cast your pieces in bronze, copper, tin or iron using standard vacuum investment casting methods and settings. It is an Ideal resin for casting pieces of art, Toy models, machine parts. The fully cured resin has a hardness of 73 shore D.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable in Red only.\u003c\/p\u003e\n\u003cdiv class=\"twpara-row row-fluid\"\u003e\n\u003cdiv id=\"1vH3Wjy6\" class=\"span12 tw-para twps-panel\"\u003e\n\u003ch2\u003eResin Properties\u003c\/h2\u003e\n\u003cdiv class=\"ptext\"\u003e\n\u003cp\u003e\u003cstrong\u003eAll Fun To Do resins are designed to be ultra fast! \u003c\/strong\u003e\u003cbr\u003eCuring times of \u003cstrong\u003e0.5 \u003c\/strong\u003eseconds for 0.02mm layers are easily achieved on standard DLP printers with an average light source of around 240Watts.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eA broad range of reactivity!\u003c\/strong\u003e\u003cbr\u003eThe resin have a very broad range of reactivity. It extends from the very short wavelengths of 225nm, to the near\/visible wavelengths of 415nm. By incorporating a very smart blend of photo initiators and sensitizers, almost any light source can be used to initiate the polymerization process of our resins. No need to modify your expensive DLP projector! Do you have a laser SLA machine, or perhaps a DLP printer with a LED source of illumination? As long as the wavelength is \u003cstrong\u003ebetween 225nm and 415nm\u003c\/strong\u003e, it will work, and it will work \u003cstrong\u003efast!\u003c\/strong\u003e\u003cbr\u003eBesides the wavelength of the light source several other factors are important, so please check out the \u003ca id=\"lnk1-1vH3Wjy6\" href=\"http:\/\/www.funtodo.net\/properties.html\" target=\"_blank\" data-linkurl=\"properties.html\" rel=\"noopener noreferrer\"\u003eproperties page\u003c\/a\u003e. If you are in doubt if your specific machine is compatible with our resins, just send an \u003ca id=\"lnk4-1vH3Wjy6\" href=\"mailto:info@funtodo.net\" target=\"_blank\" data-linkurl=\"mailto:info@funtodo.net\" rel=\"noopener noreferrer\"\u003ee-mail\u003c\/a\u003e to Fun To Do.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Fun To Do resins have an ultra low shrinkage! \u003c\/strong\u003e\u003cbr\u003eWhere 3.5% is regarded little shrinkage, they have the limited the shrinkage to \u003cstrong\u003e0.5%\u003c\/strong\u003e. \u003cbr\u003eIt is basically what you see is what you get. 3.5% seems to be little but if you take an object of 10cm (100mm) 3.5% is 3.5 mm which is nearly half a centimetre! This is huge compared to the 0.5mm the Fun To Do Resins achieve.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eA natural resistance to water and most chemicals!\u003c\/strong\u003e\u003cbr\u003eFun To Do resins have a natural resistance against water - in liquid form it is highly hydrophobic. Once fully cured there is hardly any chemical that can dissolve Fun To Do resins. The Industrial blend has a \u003cstrong\u003ehigh resistance\u003c\/strong\u003e \u003cstrong\u003eto chemicals\u003c\/strong\u003e. Cured prints have been withstanding the elements and various chemicals for several years now! To see which chemicals have been tested click \u003ca id=\"lnk2-1vH3Wjy6\" href=\"http:\/\/www.funtodo.net\/properties.html#45dbz5qV\" target=\"_blank\" data-linkurl=\"properties.html#45dbz5qV\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e​User Friendliness makes you want to build more!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e​When designing the resins we have spent quite some effort in making the resin as user friendly as possible. These efforts have resulted in a series of \u003cstrong\u003elow odor\u003c\/strong\u003e resins with \u003cstrong\u003eminimal skin irritation\u003c\/strong\u003e.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAffordable resins make it possible for you to build more!\u003c\/strong\u003e\u003cbr\u003eBy using our affordable resin you can afford to experiment, extend your knowledge about supports, exposure times, material thickness without having to think about the costs of the materials all the time.\u003cbr\u003e\u003cbr\u003e\u003ca id=\"lnk3-1vH3Wjy6\" href=\"http:\/\/www.funtodo.net\/properties.html\" target=\"_blank\" data-linkurl=\"properties.html\" rel=\"noopener noreferrer\"\u003eMore technical details and properties\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"twpara-row row-fluid\"\u003e\n\u003cdiv id=\"w8QkYoGb\" class=\"span12 tw-para \"\u003e\n\u003ch2\u003eExperience\u003c\/h2\u003e\n\u003cdiv class=\"ptext\"\u003e\n\u003cp\u003eYears of studying and practising poly chemistry in various disciplines really pays off in the design of practical and affordable resins. Fun To Do resins are not only used in the DLP 3D printing world, but are also popular in the SLA industry. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRapid Prototyping\u003c\/li\u003e\n\u003cli\u003eAutomotive industry\u003c\/li\u003e\n\u003cli\u003eArchitecture\u003c\/li\u003e\n\u003cli\u003eModelling\u003c\/li\u003e\n\u003cli\u003eToy and Game industry\u003c\/li\u003e\n\u003cli\u003eProduction\u003c\/li\u003e\n\u003cli\u003eDental industry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1kg of Fun To Do Castable Blend resin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv class=\"twpara-row row-fluid\"\u003e\n\u003cdiv id=\"w8QkYoGb\" class=\"span12 tw-para \"\u003e\n\u003cdiv class=\"ptext\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Fun To Do - Castable Blend

Product Description
$109.00 CAD
Maximum quantity available reached.

The Castable Blend has been designed to cast your pieces in bronze, copper, tin or iron using standard vacuum investment casting methods and settings. It is an Ideal resin for casting pieces of art, Toy models, machine parts. The fully cured resin has a hardness of 73 shore D.

Available in Red only.

Resin Properties

All Fun To Do resins are designed to be ultra fast! 
Curing times of 0.5 seconds for 0.02mm layers are easily achieved on standard DLP printers with an average light source of around 240Watts.

A broad range of reactivity!
The resin have a very broad range of reactivity. It extends from the very short wavelengths of 225nm, to the near/visible wavelengths of 415nm. By incorporating a very smart blend of photo initiators and sensitizers, almost any light source can be used to initiate the polymerization process of our resins. No need to modify your expensive DLP projector! Do you have a laser SLA machine, or perhaps a DLP printer with a LED source of illumination? As long as the wavelength is between 225nm and 415nm, it will work, and it will work fast!
Besides the wavelength of the light source several other factors are important, so please check out the properties page. If you are in doubt if your specific machine is compatible with our resins, just send an e-mail to Fun To Do.

The Fun To Do resins have an ultra low shrinkage! 
Where 3.5% is regarded little shrinkage, they have the limited the shrinkage to 0.5%
It is basically what you see is what you get. 3.5% seems to be little but if you take an object of 10cm (100mm) 3.5% is 3.5 mm which is nearly half a centimetre! This is huge compared to the 0.5mm the Fun To Do Resins achieve.

A natural resistance to water and most chemicals!
Fun To Do resins have a natural resistance against water - in liquid form it is highly hydrophobic. Once fully cured there is hardly any chemical that can dissolve Fun To Do resins. The Industrial blend has a high resistance to chemicals. Cured prints have been withstanding the elements and various chemicals for several years now! To see which chemicals have been tested click here 

​User Friendliness makes you want to build more!

​When designing the resins we have spent quite some effort in making the resin as user friendly as possible. These efforts have resulted in a series of low odor resins with minimal skin irritation.

Affordable resins make it possible for you to build more!
By using our affordable resin you can afford to experiment, extend your knowledge about supports, exposure times, material thickness without having to think about the costs of the materials all the time.

More technical details and properties

Experience

Years of studying and practising poly chemistry in various disciplines really pays off in the design of practical and affordable resins. Fun To Do resins are not only used in the DLP 3D printing world, but are also popular in the SLA industry. 

  • Rapid Prototyping
  • Automotive industry
  • Architecture
  • Modelling
  • Toy and Game industry
  • Production
  • Dental industry

 

Package contents:

  • 1kg of Fun To Do Castable Blend resin
          Sku: DLPR003-CB-Blend
          Vendor: Fun To Do

          Price Match

           Contact us here!

          We match all competitors pricing!

          You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you're getting honest value for your money.

          Price match for retail store

          We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor's store or website (including shipping, handling and fees, if applicable within Canada)

          Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.

          Price match for online only website

          If you find an identical item for less at a Canadian online only website, we will match their price (including shipping, handling and fees, if applicable).

          How to price match in-store:

          When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor's website.

          How to price match on DigitMakers.ca

          Please Email : Sales@digitmakers.ca

          Please make sure you have the following information before contacting us so that we can assist you as quickly as possible:

          • Your full name and phone number
          • The complete URL (web address) of product page on the competitor's website (Canada Only Accepted) 
          • Details of the product name, brand and model
          • Details of the price difference (including shipping, handling and other fees, if applicable)

           

          Our goal is to provide everyday low prices on all of our Items 

          Related Products