{"id":8206656779,"title":"E3D Kraken - 4 Hotend Extrusion Complete kit","handle":"e3d-kraken-4-hotend-extrusion","description":"\u003ch2 class=\"feature\"\u003eWhat is The Kraken\u003c\/h2\u003e\n\u003cp\u003eKraken is E3D's  cutting edge 4-Nozzle multiple extrusion hotend product. This means that you have 4 complete hotends in one. Each nozzle is individually temperature controllable, and individually bowden fed. Kraken remains a compact and lightweight package despite its capabilities by using hyper-efficient water cooling, and innovative integrated bowden couplers that are contained within the body of the Kraken. To tackle the all-too-common issues of nozzle leveling Kraken has the ability to individually adjust the height of each nozzle and can in fact almost level itself using the bed as a reference.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"contentLeft\"\u003e\n\u003ch2 class=\"feature\"\u003eWhat can you do with it?\u003c\/h2\u003e\n\u003cp\u003e Kraken lets you push the boundaries of what is possible to 3D print by allowing you to use 4 distinct colours in a single print, 4 separate engineering plastics in a single part, or explore complex geometry by using soluble or breakaway support materials.\u003c\/p\u003e\n\u003cp\u003eUsing multiple colours in a single print gives you the ability to convey more visual information in your prototypes, and express more creativity in the visual design of your prints.\u003c\/p\u003e\n\u003cp\u003eMultiple material printing opens up huge possibilities of what is functionally possible from a single print. Instead of being stuck with one set of material properties for each print you can use the best possible material for the job in each part of your object.\u003c\/p\u003e\n\u003cp\u003eHaving a separate support material hugely increases the possibilities of what geometries are possible to print. Release your designs from the shackles of limited overhangs and bridges and open up whole new possibilities in freeform printing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"imageRight\"\u003e \u003ciframe width=\"500\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/wEw4UDUUbIE\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cdiv class=\"contentRight\"\u003e\n\u003ch4 class=\"feature\"\u003eRequirements and Expectations\u003c\/h4\u003e\n\u003cp\u003eAlthough Kraken is now a mature and well tested hardware product with hundreds in the wild and a great deal of excellent community feedback it is worth keeping in mind that the Kraken requires a certain level of work and learning to get running. A working knowledge of firmware configuration, slicer settings and electronics is essential.\u003c\/p\u003e\n\u003cp\u003eKraken requires an electronics setup that is capable of driving 4 distinct extruders, so far we have had great results and feedback with both the Azteeg X3 Pro and the RepRapPro Duet with DueX4 expansion.\u003c\/p\u003e\n\u003cp\u003eWe are currently selling the Kraken as a fully loaded kit, which contains all the machined hotend parts, thermistors, heater cartridges, bowden tubing and couplings, and a water cooling pump with tubing. To complete the setup you will need 4 Bowden extruders of your choice, and a reservoir for the water pump to sit in.\u003c\/p\u003e\n\u003cp\u003eSupport documentation can be found on our \u003ca href=\"http:\/\/wiki.e3d-online.com\/wiki\/Kraken_Documentation\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ewiki\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Kraken enables the user to extrude up to 4 different filaments in a single print, all at different print temperatures. Since the Kraken is water cooled it is highly compact and can be used in a heated chamber. Each of the nozzles on Kraken is individually adjustable in height, and can be set so that they are 100% planar to the bed by referencing the bed itself. Despite all this Kraken is a compact little beast, at only 40mmx35mm in footprint. Kraken uses the same all-metal principles that are behind our successful E3D-v6 all-metal hotends and you can expect similar performance here. The Kraken is exclusively 1.75mm at this point in time and will be supplied with four 0.4mm nozzles as standard.\u003c\/p\u003e\n\u003cp\u003eThis kit is a fully equipped version of the Kraken with all 4 nozzles included and enabled - we are including all the needed electronics such as heater cartridges and thermistors. We will also be supplying a water pump with tubing. We won't supply a reservoir for the water - but this is easily self-sourced in the form of any waterproof container. All our testing shows that there is no need for a radiator, and simple passive cooling of the water as it passes through the system seems to cool things effectively. Our standard v5 and v6 1.75mm nozzles are compatible with Kraken. The Kraken was designed for v5 heater blocks (and is supplied with them), however if you want to use v6 heater blocks, this is possible with some clever arrangement.\u003c\/p\u003e\n\u003cp\u003eWe have done extensive testing with the Kraken, and are happy with the design and feel it is ready for market However due to it's complexity, we are still releasing it as a beta product. This means that we aren't able to make promises about its capabilities or performance. However, don't be afraid - there is a community of Kraken developers out there that have already started working on the software and hardware support. There are still challenges in software and electronics capabilities, but we are working with software developers and electronics manufacturers towards complete support.\u003c\/p\u003e\n\u003cp\u003eCurrently we are only shipping this product as a full kit without the option for a different number of nozzles.\u003c\/p\u003e\n\u003cp\u003eIf you require extra tubing for the Bowden or water cooling systems please go and buy the extra amounts you need from the \"Mechanical\" section of the store - we'll supply the extra tube as a continuous length.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent Weights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHeat Break: 3.25g\u003cbr\u003eBarbs: 2g\u003cbr\u003eCooler Block: 59g\u003cbr\u003eHeater Block: 7g \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine unassembled E3D Kraken kit (12V, 1.75mm)\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-02-22T14:22:00-05:00","created_at":"2017-02-24T12:51:08-05:00","vendor":"E3D","type":"Parts","tags":["e3D","e3d v6","extruder","hotend","Kraken"],"price":29040,"price_min":29040,"price_max":29040,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":27578849931,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"E3D-V6-Kraken","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"E3D Kraken - 4 Hotend Extrusion Complete kit","public_title":null,"options":["Default Title"],"price":29040,"weight":2000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001088","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/kraken1.jpg?v=1613452922"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/kraken1.jpg?v=1613452922","options":["Title"],"media":[{"alt":"E3D Kraken - 4 Hotend Extrusion Complete kit - Digitmakers.ca","id":98275393572,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/kraken1.jpg?v=1613452922"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/kraken1.jpg?v=1613452922","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2 class=\"feature\"\u003eWhat is The Kraken\u003c\/h2\u003e\n\u003cp\u003eKraken is E3D's  cutting edge 4-Nozzle multiple extrusion hotend product. This means that you have 4 complete hotends in one. Each nozzle is individually temperature controllable, and individually bowden fed. Kraken remains a compact and lightweight package despite its capabilities by using hyper-efficient water cooling, and innovative integrated bowden couplers that are contained within the body of the Kraken. To tackle the all-too-common issues of nozzle leveling Kraken has the ability to individually adjust the height of each nozzle and can in fact almost level itself using the bed as a reference.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"contentLeft\"\u003e\n\u003ch2 class=\"feature\"\u003eWhat can you do with it?\u003c\/h2\u003e\n\u003cp\u003e Kraken lets you push the boundaries of what is possible to 3D print by allowing you to use 4 distinct colours in a single print, 4 separate engineering plastics in a single part, or explore complex geometry by using soluble or breakaway support materials.\u003c\/p\u003e\n\u003cp\u003eUsing multiple colours in a single print gives you the ability to convey more visual information in your prototypes, and express more creativity in the visual design of your prints.\u003c\/p\u003e\n\u003cp\u003eMultiple material printing opens up huge possibilities of what is functionally possible from a single print. Instead of being stuck with one set of material properties for each print you can use the best possible material for the job in each part of your object.\u003c\/p\u003e\n\u003cp\u003eHaving a separate support material hugely increases the possibilities of what geometries are possible to print. Release your designs from the shackles of limited overhangs and bridges and open up whole new possibilities in freeform printing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"imageRight\"\u003e \u003ciframe width=\"500\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/wEw4UDUUbIE\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cdiv class=\"contentRight\"\u003e\n\u003ch4 class=\"feature\"\u003eRequirements and Expectations\u003c\/h4\u003e\n\u003cp\u003eAlthough Kraken is now a mature and well tested hardware product with hundreds in the wild and a great deal of excellent community feedback it is worth keeping in mind that the Kraken requires a certain level of work and learning to get running. A working knowledge of firmware configuration, slicer settings and electronics is essential.\u003c\/p\u003e\n\u003cp\u003eKraken requires an electronics setup that is capable of driving 4 distinct extruders, so far we have had great results and feedback with both the Azteeg X3 Pro and the RepRapPro Duet with DueX4 expansion.\u003c\/p\u003e\n\u003cp\u003eWe are currently selling the Kraken as a fully loaded kit, which contains all the machined hotend parts, thermistors, heater cartridges, bowden tubing and couplings, and a water cooling pump with tubing. To complete the setup you will need 4 Bowden extruders of your choice, and a reservoir for the water pump to sit in.\u003c\/p\u003e\n\u003cp\u003eSupport documentation can be found on our \u003ca href=\"http:\/\/wiki.e3d-online.com\/wiki\/Kraken_Documentation\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ewiki\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Kraken enables the user to extrude up to 4 different filaments in a single print, all at different print temperatures. Since the Kraken is water cooled it is highly compact and can be used in a heated chamber. Each of the nozzles on Kraken is individually adjustable in height, and can be set so that they are 100% planar to the bed by referencing the bed itself. Despite all this Kraken is a compact little beast, at only 40mmx35mm in footprint. Kraken uses the same all-metal principles that are behind our successful E3D-v6 all-metal hotends and you can expect similar performance here. The Kraken is exclusively 1.75mm at this point in time and will be supplied with four 0.4mm nozzles as standard.\u003c\/p\u003e\n\u003cp\u003eThis kit is a fully equipped version of the Kraken with all 4 nozzles included and enabled - we are including all the needed electronics such as heater cartridges and thermistors. We will also be supplying a water pump with tubing. We won't supply a reservoir for the water - but this is easily self-sourced in the form of any waterproof container. All our testing shows that there is no need for a radiator, and simple passive cooling of the water as it passes through the system seems to cool things effectively. Our standard v5 and v6 1.75mm nozzles are compatible with Kraken. The Kraken was designed for v5 heater blocks (and is supplied with them), however if you want to use v6 heater blocks, this is possible with some clever arrangement.\u003c\/p\u003e\n\u003cp\u003eWe have done extensive testing with the Kraken, and are happy with the design and feel it is ready for market However due to it's complexity, we are still releasing it as a beta product. This means that we aren't able to make promises about its capabilities or performance. However, don't be afraid - there is a community of Kraken developers out there that have already started working on the software and hardware support. There are still challenges in software and electronics capabilities, but we are working with software developers and electronics manufacturers towards complete support.\u003c\/p\u003e\n\u003cp\u003eCurrently we are only shipping this product as a full kit without the option for a different number of nozzles.\u003c\/p\u003e\n\u003cp\u003eIf you require extra tubing for the Bowden or water cooling systems please go and buy the extra amounts you need from the \"Mechanical\" section of the store - we'll supply the extra tube as a continuous length.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent Weights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHeat Break: 3.25g\u003cbr\u003eBarbs: 2g\u003cbr\u003eCooler Block: 59g\u003cbr\u003eHeater Block: 7g \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine unassembled E3D Kraken kit (12V, 1.75mm)\u003c\/li\u003e\n\u003c\/ul\u003e"}
  1. Home
  2. Hotends
  3. E3D Kraken - 4 Hotend Extrusion Complete kit

E3D Kraken - 4 Hotend Extrusion Complete kit

Previous Product | Next Product
Product Description
$290.40 CAD
Maximum quantity available reached.

What is The Kraken

Kraken is E3D's  cutting edge 4-Nozzle multiple extrusion hotend product. This means that you have 4 complete hotends in one. Each nozzle is individually temperature controllable, and individually bowden fed. Kraken remains a compact and lightweight package despite its capabilities by using hyper-efficient water cooling, and innovative integrated bowden couplers that are contained within the body of the Kraken. To tackle the all-too-common issues of nozzle leveling Kraken has the ability to individually adjust the height of each nozzle and can in fact almost level itself using the bed as a reference.

What can you do with it?

 Kraken lets you push the boundaries of what is possible to 3D print by allowing you to use 4 distinct colours in a single print, 4 separate engineering plastics in a single part, or explore complex geometry by using soluble or breakaway support materials.

Using multiple colours in a single print gives you the ability to convey more visual information in your prototypes, and express more creativity in the visual design of your prints.

Multiple material printing opens up huge possibilities of what is functionally possible from a single print. Instead of being stuck with one set of material properties for each print you can use the best possible material for the job in each part of your object.

Having a separate support material hugely increases the possibilities of what geometries are possible to print. Release your designs from the shackles of limited overhangs and bridges and open up whole new possibilities in freeform printing.

   

Although Kraken is now a mature and well tested hardware product with hundreds in the wild and a great deal of excellent community feedback it is worth keeping in mind that the Kraken requires a certain level of work and learning to get running. A working knowledge of firmware configuration, slicer settings and electronics is essential.

Kraken requires an electronics setup that is capable of driving 4 distinct extruders, so far we have had great results and feedback with both the Azteeg X3 Pro and the RepRapPro Duet with DueX4 expansion.

We are currently selling the Kraken as a fully loaded kit, which contains all the machined hotend parts, thermistors, heater cartridges, bowden tubing and couplings, and a water cooling pump with tubing. To complete the setup you will need 4 Bowden extruders of your choice, and a reservoir for the water pump to sit in.

Support documentation can be found on our wiki.

The Kraken enables the user to extrude up to 4 different filaments in a single print, all at different print temperatures. Since the Kraken is water cooled it is highly compact and can be used in a heated chamber. Each of the nozzles on Kraken is individually adjustable in height, and can be set so that they are 100% planar to the bed by referencing the bed itself. Despite all this Kraken is a compact little beast, at only 40mmx35mm in footprint. Kraken uses the same all-metal principles that are behind our successful E3D-v6 all-metal hotends and you can expect similar performance here. The Kraken is exclusively 1.75mm at this point in time and will be supplied with four 0.4mm nozzles as standard.

This kit is a fully equipped version of the Kraken with all 4 nozzles included and enabled - we are including all the needed electronics such as heater cartridges and thermistors. We will also be supplying a water pump with tubing. We won't supply a reservoir for the water - but this is easily self-sourced in the form of any waterproof container. All our testing shows that there is no need for a radiator, and simple passive cooling of the water as it passes through the system seems to cool things effectively. Our standard v5 and v6 1.75mm nozzles are compatible with Kraken. The Kraken was designed for v5 heater blocks (and is supplied with them), however if you want to use v6 heater blocks, this is possible with some clever arrangement.

We have done extensive testing with the Kraken, and are happy with the design and feel it is ready for market However due to it's complexity, we are still releasing it as a beta product. This means that we aren't able to make promises about its capabilities or performance. However, don't be afraid - there is a community of Kraken developers out there that have already started working on the software and hardware support. There are still challenges in software and electronics capabilities, but we are working with software developers and electronics manufacturers towards complete support.

Currently we are only shipping this product as a full kit without the option for a different number of nozzles.

If you require extra tubing for the Bowden or water cooling systems please go and buy the extra amounts you need from the "Mechanical" section of the store - we'll supply the extra tube as a continuous length.

 

Component Weights:

Heat Break: 3.25g
Barbs: 2g
Cooler Block: 59g
Heater Block: 7g 

Package contents:

  • Genuine unassembled E3D Kraken kit (12V, 1.75mm)

Price Match

 Contact us here!

We match all competitors pricing!

You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you're getting honest value for your money.

Price match for retail store

We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor's store or website (including shipping, handling and fees, if applicable within Canada)

Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.

Price match for online only website

If you find an identical item for less at a Canadian online only website, we will match their price (including shipping, handling and fees, if applicable).

How to price match in-store:

When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor's website.

How to price match on DigitMakers.ca

Please Email : Sales@digitmakers.ca

Please make sure you have the following information before contacting us so that we can assist you as quickly as possible:

  • Your full name and phone number
  • The complete URL (web address) of product page on the competitor's website (Canada Only Accepted) 
  • Details of the product name, brand and model
  • Details of the price difference (including shipping, handling and other fees, if applicable)

 

Our goal is to provide everyday low prices on all of our Items 

Sku: E3D-V6-Kraken
Vendor: E3D
Get a free quotation for the product of your interest today. Choose from a wide range of 3D Printers , 3D Scanners, 3D Printing Filaments , 3D Resin & 3D Printing parts today ! Contact us today !

Price Match

 Contact us here!

We match all competitors pricing!

You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you're getting honest value for your money.

Price match for retail store

We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor's store or website (including shipping, handling and fees, if applicable within Canada)

Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.

Price match for online only website

If you find an identical item for less at a Canadian online only website, we will match their price (including shipping, handling and fees, if applicable).

How to price match in-store:

When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor's website.

How to price match on DigitMakers.ca

Please Email : Sales@digitmakers.ca

Please make sure you have the following information before contacting us so that we can assist you as quickly as possible:

  • Your full name and phone number
  • The complete URL (web address) of product page on the competitor's website (Canada Only Accepted) 
  • Details of the product name, brand and model
  • Details of the price difference (including shipping, handling and other fees, if applicable)

 

Our goal is to provide everyday low prices on all of our Items 

Related Products