{"id":908294258724,"title":"Cyclops+ Dual Extrusion 12 volts , Air Cooled","handle":"cyclops-dual-extrusion","description":"\u003ch5\u003eStill dual extrusion in a tiny package; now with new compatibility and features.\u003c\/h5\u003e\n\u003cp\u003eThis beasts has evolved. classic airand experience the multi-extrusion  Cyclops+. Read more on e3d \u003ca href=\"https:\/\/e3d-online.com\/blog\/2018\/02\/16\/cyclops-chimera\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eblog!\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch8\u003eMulti-Extrusion\u003c\/h8\u003e\n\u003cp\u003eChoose the Chimera+ for two-filament, two-nozzle dual extrusion, great for multi-material supports. Or try the unique two-filament, one-nozzle Cyclops+. With a hot side designed to switch seamlessly between inputs, Cyclops+ never leaves an idle nozzle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch8\u003eEcosystem Compatibility\u003c\/h8\u003e\n\u003cp\u003eCyclops+ and Chimera+ fit our standard fans, thermistors and heater cartridges. \u003cbr\u003e\u003cbr\u003eCyclops+ now compatible with cartridge-style heaters and thermistors, opening the door to PT100s and thermocouples.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch8\u003eUnique Cyclops Hotside\u003c\/h8\u003e\n\u003cp\u003eThe Cyclops heater block has been completely reworked, improving performance and making it more adaptable. We’ve removed all unnecessary material, lowering the thermal mass and reducing heat-up times. By changing the outer architecture of the block, we’ve also reduced the amount of heat radiating down from the block onto the print. This makes it easier to print small, complex parts without the need for a silicone sock.\u003cbr\u003e\u003cbr\u003eThe distance between the filament paths is 2mm larger compared to the old-style Cyclops. This makes Cyclops+ compatible with the Kraken, for those looking to experiment.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAir-Cooled Cold Side ( Cyclops+)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAir-cooled heatsink\u003c\/li\u003e\n\u003cli\u003e2x black plastic collets\u003c\/li\u003e\n\u003cli\u003e2x blue plastic collet clips\u003c\/li\u003e\n\u003cli\u003eCyclops+ fixings kit (suitable for Cyclops+ and Chimera+)\u003c\/li\u003e\n\u003cli\u003e800mm PTFE bowden tubing\u003c\/li\u003e\n\u003cli\u003e12V\/24V fan\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCyclops+ Hot Side\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.4mm Cyclops nozzle\u003c\/li\u003e\n\u003cli\u003eCyclops heater block\u003c\/li\u003e\n\u003cli\u003e2x Kraken heatbreaks\u003c\/li\u003e\n\u003cli\u003eCyclops+ hotside fixings kit\u003c\/li\u003e\n\u003cli\u003eHeatsink Compound\u003c\/li\u003e\n\u003cli\u003e30W Heater cartridge (12V\/24V)\u003c\/li\u003e\n\u003cli\u003eThermistor cartridge\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-02-22T14:22:00-05:00","created_at":"2018-09-11T12:54:27-04:00","vendor":"E3D","type":"Parts","tags":["Chimera","e3D","e3d v6","electrical","mechanical","new-arrivals"],"price":15900,"price_min":15900,"price_max":15900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":9205780971556,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"E3D-V6-Chimera","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cyclops+ Dual Extrusion 12 volts , Air Cooled","public_title":null,"options":["Default Title"],"price":15900,"weight":1500,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/e3dcyclopaircooled.jpg?v=1594469374"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/e3dcyclopaircooled.jpg?v=1594469374","options":["Title"],"media":[{"alt":"Cyclops+ Dual Extrusion 12 volts , Air Cooled - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":823764910211,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/e3dcyclopaircooled.jpg?v=1569082057"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/e3dcyclopaircooled.jpg?v=1569082057","width":700}],"content":"\u003ch5\u003eStill dual extrusion in a tiny package; now with new compatibility and features.\u003c\/h5\u003e\n\u003cp\u003eThis beasts has evolved. classic airand experience the multi-extrusion  Cyclops+. Read more on e3d \u003ca href=\"https:\/\/e3d-online.com\/blog\/2018\/02\/16\/cyclops-chimera\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eblog!\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch8\u003eMulti-Extrusion\u003c\/h8\u003e\n\u003cp\u003eChoose the Chimera+ for two-filament, two-nozzle dual extrusion, great for multi-material supports. Or try the unique two-filament, one-nozzle Cyclops+. With a hot side designed to switch seamlessly between inputs, Cyclops+ never leaves an idle nozzle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch8\u003eEcosystem Compatibility\u003c\/h8\u003e\n\u003cp\u003eCyclops+ and Chimera+ fit our standard fans, thermistors and heater cartridges. \u003cbr\u003e\u003cbr\u003eCyclops+ now compatible with cartridge-style heaters and thermistors, opening the door to PT100s and thermocouples.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch8\u003eUnique Cyclops Hotside\u003c\/h8\u003e\n\u003cp\u003eThe Cyclops heater block has been completely reworked, improving performance and making it more adaptable. We’ve removed all unnecessary material, lowering the thermal mass and reducing heat-up times. By changing the outer architecture of the block, we’ve also reduced the amount of heat radiating down from the block onto the print. This makes it easier to print small, complex parts without the need for a silicone sock.\u003cbr\u003e\u003cbr\u003eThe distance between the filament paths is 2mm larger compared to the old-style Cyclops. This makes Cyclops+ compatible with the Kraken, for those looking to experiment.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAir-Cooled Cold Side ( Cyclops+)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAir-cooled heatsink\u003c\/li\u003e\n\u003cli\u003e2x black plastic collets\u003c\/li\u003e\n\u003cli\u003e2x blue plastic collet clips\u003c\/li\u003e\n\u003cli\u003eCyclops+ fixings kit (suitable for Cyclops+ and Chimera+)\u003c\/li\u003e\n\u003cli\u003e800mm PTFE bowden tubing\u003c\/li\u003e\n\u003cli\u003e12V\/24V fan\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCyclops+ Hot Side\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.4mm Cyclops nozzle\u003c\/li\u003e\n\u003cli\u003eCyclops heater block\u003c\/li\u003e\n\u003cli\u003e2x Kraken heatbreaks\u003c\/li\u003e\n\u003cli\u003eCyclops+ hotside fixings kit\u003c\/li\u003e\n\u003cli\u003eHeatsink Compound\u003c\/li\u003e\n\u003cli\u003e30W Heater cartridge (12V\/24V)\u003c\/li\u003e\n\u003cli\u003eThermistor cartridge\u003c\/li\u003e\n\u003c\/ul\u003e"}

Cyclops+ Dual Extrusion 12 volts , Air Cooled

Product Description
$159.00 CAD
Maximum quantity available reached.
Still dual extrusion in a tiny package; now with new compatibility and features.

This beasts has evolved. classic airand experience the multi-extrusion  Cyclops+. Read more on e3d blog!

  • Multi-Extrusion

    Choose the Chimera+ for two-filament, two-nozzle dual extrusion, great for multi-material supports. Or try the unique two-filament, one-nozzle Cyclops+. With a hot side designed to switch seamlessly between inputs, Cyclops+ never leaves an idle nozzle.

  • Ecosystem Compatibility

    Cyclops+ and Chimera+ fit our standard fans, thermistors and heater cartridges. 

    Cyclops+ now compatible with cartridge-style heaters and thermistors, opening the door to PT100s and thermocouples.

  • Unique Cyclops Hotside

    The Cyclops heater block has been completely reworked, improving performance and making it more adaptable. We’ve removed all unnecessary material, lowering the thermal mass and reducing heat-up times. By changing the outer architecture of the block, we’ve also reduced the amount of heat radiating down from the block onto the print. This makes it easier to print small, complex parts without the need for a silicone sock.

    The distance between the filament paths is 2mm larger compared to the old-style Cyclops. This makes Cyclops+ compatible with the Kraken, for those looking to experiment.

Air-Cooled Cold Side ( Cyclops+)

  • Air-cooled heatsink
  • 2x black plastic collets
  • 2x blue plastic collet clips
  • Cyclops+ fixings kit (suitable for Cyclops+ and Chimera+)
  • 800mm PTFE bowden tubing
  • 12V/24V fan

Cyclops+ Hot Side

  • 0.4mm Cyclops nozzle
  • Cyclops heater block
  • 2x Kraken heatbreaks
  • Cyclops+ hotside fixings kit
  • Heatsink Compound
  • 30W Heater cartridge (12V/24V)
  • Thermistor cartridge
Sku: E3D-V6-Chimera
Vendor: E3D
Get a free quotation for the product of your interest today. Choose from a wide range of 3D Printers , 3D Scanners, 3D Printing Filaments , 3D Resin & 3D Printing parts today ! Contact us today !

Price Match

 Contact us here!

We match all competitors pricing!

You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you're getting honest value for your money.

Price match for retail store

We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor's store or website (including shipping, handling and fees, if applicable within Canada)

Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.

Price match for online only website

If you find an identical item for less at a Canadian online only website, we will match their price (including shipping, handling and fees, if applicable).

How to price match in-store:

When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor's website.

How to price match on DigitMakers.ca

Please Email : Sales@digitmakers.ca

Please make sure you have the following information before contacting us so that we can assist you as quickly as possible:

  • Your full name and phone number
  • The complete URL (web address) of product page on the competitor's website (Canada Only Accepted) 
  • Details of the product name, brand and model
  • Details of the price difference (including shipping, handling and other fees, if applicable)

 

Our goal is to provide everyday low prices on all of our Items 

Related Products