{"id":8058621899,"title":"Draken DLP-SLA 3D Printer Without Projector","handle":"draken-dlp-sla-3d-printer-without-projector","description":"\u003cp\u003eDraken is affordable , high resolution and fast 3D printer.\u003c\/p\u003e\n\u003cul\u003e-Draken prints  up to 8.66″ tall with up to 3.86″ x 7.09″ build base at 90 micron XYZ resolution, one of the largest and tallest among all personal SLA printers.\u003c\/ul\u003e\n\u003cul\u003e-Draken is one of the fastest personal SLA printers in the market today.  For other SLA printers to print a 6.5 inch Statue of Liberty with 100 micron Z resolution, it takes anywhere from 6 to 8 hours. With Draken, it takes less than 4 hours.\u003c\/ul\u003e\n\u003cul\u003e-For most SLA printers on market, the resin vat needs to be replaced every few months, because the silicone coating on the vat might get cloudy after extensive usage. In Draken, we bonded a thin Teflon layer on top of the silicon coating, which greatly extended the lifetime of the vat. You won’t need to worry about frequent replacement of the vat anymore.\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e3DFacture Draken Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstrong\u003e-Stereolithography (SLA) printing technology: Bottom-up SLA configuration\u003c\/strong\u003e\u003cstrong\u003e-Sturdy print bed with Teflon coating to dramatically reduce print bed clouding\u003c\/strong\u003e\u003cstrong\u003e-Use of Commercial DLP 1080P projectors to eliminate laser flare and laser aging issues\u003c\/strong\u003e\u003cstrong\u003e-Smart projector lens covering\u003c\/strong\u003e\u003cstrong\u003e-Novel Fast Peel mechanism\u003c\/strong\u003e\u003cstrong\u003e-Universal projector mount adjustable to different types of projectors\u003c\/strong\u003e\u003cstrong\u003e-Add on of Raspberry Pi for wireless print control\u003c\/strong\u003e\u003cstrong\u003e-Support for 3rd party resins\u003c\/strong\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/pic03-734x400.jpg\"\u003e\u003cimg class=\" wp-image-6537 alignleft\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/pic03-734x400.jpg\" alt=\"pic03-734x400\" width=\"747\" height=\"407\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/pic01-600x400.jpg\"\u003e\u003cimg class=\"wp-image-6534 alignnone\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/pic01-600x400.jpg\" alt=\"pic01-600x400\" width=\"630\" height=\"421\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Castle.jpg\"\u003e\u003cimg class=\"wp-image-6536 aligncenter\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Castle.jpg\" alt=\"castle\" width=\"469\" height=\"262\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e  Printing Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e-XY resolution: 37μm to 90μm\u003c\/ul\u003e\n\u003cul\u003e-Z resolution: 10μm\u003c\/ul\u003e\n\u003cul\u003e-Build Size: 7.1″ x 3.9″ x 8.7″ \/ 180mm x 98mm x 223mm\u003c\/ul\u003e\n\u003cul\u003e-Maximum print speed:\u003c\/ul\u003e\n\u003cul\u003e--\u0026gt; 3.6 inches \/ hr for xy:50μm and z:100μm resolution\u003c\/ul\u003e\n\u003cul\u003e--\u0026gt; 1.8 inches \/ hr for xy:100μm and z:100μm resolution\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDigitMakers Review : \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe have tested this printer and printed many successful prints , the printer is based on open source software and firmware . You will need to connected to the PC all the time to print.\u003cbr\u003e The printer require some learning to operate and produce consistently great prints.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=8KZldJDhAXk\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/3dfacture.com\/wiki\/user-manual\/\"\u003eThe Printer Instructions  Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/embed\/-KVGNdGDGI8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/embed\/hQ21gbeYFYQ\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=VufZd94JY5I\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-29T12:28:00-05:00","created_at":"2017-01-29T12:28:07-05:00","vendor":"3d Facture","type":"3D Printers","tags":["3d facture","DLP","draken","resin 3dprinter","SLA"],"price":149999,"price_min":149999,"price_max":149999,"available":true,"price_varies":false,"compare_at_price":202000,"compare_at_price_min":202000,"compare_at_price_max":202000,"compare_at_price_varies":false,"variants":[{"id":26393917579,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3DLP001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Draken DLP-SLA 3D Printer Without Projector","public_title":null,"options":["Default Title"],"price":149999,"weight":17000,"compare_at_price":202000,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Draken-DLP_SLA_Digitmakers.jpg?v=1485710888","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/new-look-Draken-5-460x345.jpg?v=1485710888","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/pic01-600x400.jpg?v=1485710888"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Draken-DLP_SLA_Digitmakers.jpg?v=1485710888","options":["Title"],"content":"\u003cp\u003eDraken is affordable , high resolution and fast 3D printer.\u003c\/p\u003e\n\u003cul\u003e-Draken prints  up to 8.66″ tall with up to 3.86″ x 7.09″ build base at 90 micron XYZ resolution, one of the largest and tallest among all personal SLA printers.\u003c\/ul\u003e\n\u003cul\u003e-Draken is one of the fastest personal SLA printers in the market today.  For other SLA printers to print a 6.5 inch Statue of Liberty with 100 micron Z resolution, it takes anywhere from 6 to 8 hours. With Draken, it takes less than 4 hours.\u003c\/ul\u003e\n\u003cul\u003e-For most SLA printers on market, the resin vat needs to be replaced every few months, because the silicone coating on the vat might get cloudy after extensive usage. In Draken, we bonded a thin Teflon layer on top of the silicon coating, which greatly extended the lifetime of the vat. You won’t need to worry about frequent replacement of the vat anymore.\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e3DFacture Draken Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstrong\u003e-Stereolithography (SLA) printing technology: Bottom-up SLA configuration\u003c\/strong\u003e\u003cstrong\u003e-Sturdy print bed with Teflon coating to dramatically reduce print bed clouding\u003c\/strong\u003e\u003cstrong\u003e-Use of Commercial DLP 1080P projectors to eliminate laser flare and laser aging issues\u003c\/strong\u003e\u003cstrong\u003e-Smart projector lens covering\u003c\/strong\u003e\u003cstrong\u003e-Novel Fast Peel mechanism\u003c\/strong\u003e\u003cstrong\u003e-Universal projector mount adjustable to different types of projectors\u003c\/strong\u003e\u003cstrong\u003e-Add on of Raspberry Pi for wireless print control\u003c\/strong\u003e\u003cstrong\u003e-Support for 3rd party resins\u003c\/strong\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/pic03-734x400.jpg\"\u003e\u003cimg class=\" wp-image-6537 alignleft\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/pic03-734x400.jpg\" alt=\"pic03-734x400\" width=\"747\" height=\"407\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/pic01-600x400.jpg\"\u003e\u003cimg class=\"wp-image-6534 alignnone\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/pic01-600x400.jpg\" alt=\"pic01-600x400\" width=\"630\" height=\"421\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Castle.jpg\"\u003e\u003cimg class=\"wp-image-6536 aligncenter\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Castle.jpg\" alt=\"castle\" width=\"469\" height=\"262\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e  Printing Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e-XY resolution: 37μm to 90μm\u003c\/ul\u003e\n\u003cul\u003e-Z resolution: 10μm\u003c\/ul\u003e\n\u003cul\u003e-Build Size: 7.1″ x 3.9″ x 8.7″ \/ 180mm x 98mm x 223mm\u003c\/ul\u003e\n\u003cul\u003e-Maximum print speed:\u003c\/ul\u003e\n\u003cul\u003e--\u0026gt; 3.6 inches \/ hr for xy:50μm and z:100μm resolution\u003c\/ul\u003e\n\u003cul\u003e--\u0026gt; 1.8 inches \/ hr for xy:100μm and z:100μm resolution\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDigitMakers Review : \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe have tested this printer and printed many successful prints , the printer is based on open source software and firmware . You will need to connected to the PC all the time to print.\u003cbr\u003e The printer require some learning to operate and produce consistently great prints.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=8KZldJDhAXk\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/3dfacture.com\/wiki\/user-manual\/\"\u003eThe Printer Instructions  Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/embed\/-KVGNdGDGI8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/embed\/hQ21gbeYFYQ\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=VufZd94JY5I\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

Draken DLP-SLA 3D Printer Without Projector

Product Description
$1,499.99 $2,020.00
Maximum quantity available reached.

Draken is affordable , high resolution and fast 3D printer.

    -Draken prints  up to 8.66″ tall with up to 3.86″ x 7.09″ build base at 90 micron XYZ resolution, one of the largest and tallest among all personal SLA printers.
    -Draken is one of the fastest personal SLA printers in the market today.  For other SLA printers to print a 6.5 inch Statue of Liberty with 100 micron Z resolution, it takes anywhere from 6 to 8 hours. With Draken, it takes less than 4 hours.
    -For most SLA printers on market, the resin vat needs to be replaced every few months, because the silicone coating on the vat might get cloudy after extensive usage. In Draken, we bonded a thin Teflon layer on top of the silicon coating, which greatly extended the lifetime of the vat. You won’t need to worry about frequent replacement of the vat anymore.

3DFacture Draken Features:

-Stereolithography (SLA) printing technology: Bottom-up SLA configuration-Sturdy print bed with Teflon coating to dramatically reduce print bed clouding-Use of Commercial DLP 1080P projectors to eliminate laser flare and laser aging issues-Smart projector lens covering-Novel Fast Peel mechanism-Universal projector mount adjustable to different types of projectors-Add on of Raspberry Pi for wireless print control-Support for 3rd party resins

pic03-734x400pic01-600x400castle

 

 

 

  Printing Features:

    -XY resolution: 37μm to 90μm
    -Z resolution: 10μm
    -Build Size: 7.1″ x 3.9″ x 8.7″ / 180mm x 98mm x 223mm
    -Maximum print speed:
    --> 3.6 inches / hr for xy:50μm and z:100μm resolution
    --> 1.8 inches / hr for xy:100μm and z:100μm resolution

DigitMakers Review : 

We have tested this printer and printed many successful prints , the printer is based on open source software and firmware . You will need to connected to the PC all the time to print.
The printer require some learning to operate and produce consistently great prints.

https://www.youtube.com/watch?v=8KZldJDhAXk

The Printer Instructions  Here

https://www.youtube.com/embed/-KVGNdGDGI8

https://www.youtube.com/embed/hQ21gbeYFYQ

https://www.youtube.com/watch?v=VufZd94JY5I

 

Sku: 3DLP001
Vendor: 3d Facture

Related Products