{"id":13011710539,"title":"Duet 2 WiFi 3D Printer Controller V1.05","handle":"duet-2-wifi-3d-printer-controller","description":"\u003cp\u003e\u003cspan\u003eThis is the latest version of the Duet 2 Wifi, v1.05\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe DuetWifi is an advanced 32 bit electronics for the control of 3D printers and other CNC machines. It has the same features as the \u003ca href=\"https:\/\/www.digitmakers.ca\/products\/duet-ethernet\"\u003eDuet Ethernet\u003c\/a\u003e other than providing a WiFi connectivity rather than ethernet, \u003ca href=\"https:\/\/docs.duet3d.com\/en\/Duet3D_hardware\/Duet_2_family\/Duet_2_WiFi_Ethernet_Hardware_Overview\" target=\"_blank\"\u003efull feature description is available on the wiki\u003c\/a\u003e, in summary:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePowerful 32 Bit Processor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDedicated Wifi module\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuper quiet TMC2660 stepper drivers, up to 256 micro stepping.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh-speed SD card and support for a second SD external card if required.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual extruders on the main board, up to 5 more extruders on the expansion board.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh Power rating: Each stepper driver is capable of 2.8A motor current, currently limited in software to 2.4A. The bed heater channel is specifically designed for high current (18A).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConnect via PC, tablet or smartphone on the same network to the onboard web interface.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSetup your printer and update the firmware through the web interface.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll common 3D printer geometries are supported\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExpandable up to 7 extruders with Firmware support for mixing nozzles and remapping axes to use high power, external drivers.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupport for the \u003ca href=\"https:\/\/duet3d.com\/wiki\/PanelDue\" target=\"_blank\"\u003ePanelDue\u003c\/a\u003e: a full-color graphics touch screen - \u003ca href=\"https:\/\/spool3d.ca\/paneldue-display-driver-v1-1\/\"\u003eavailable here\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe recommend you purchase directly from Think3DPrint3D if you are located in the UK.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's in the box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDuet WifFi controller board\u003c\/li\u003e\n\u003cli\u003eUSB cable\u003c\/li\u003e\n\u003cli\u003eConnectors kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSetup documentation is available \u003ca href=\"https:\/\/docs.duet3d.com\/en\/User_manual\/Overview\/Getting_started_Duet_2_WiFi_Ethernet\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-01-29T12:23:00-05:00","created_at":"2017-10-19T11:51:33-04:00","vendor":"Duet3D","type":"Parts","tags":["3D printer","3D Printer Controller","Duet","duet 3d","Duet wifi","electrical","motherboard","wifi"],"price":16800,"price_min":16800,"price_max":16800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":60831177227,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DUET-WIFI","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Duet 2 WiFi 3D Printer Controller V1.05","public_title":null,"options":["Default Title"],"price":16800,"weight":2000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5060662920486","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/Duet2Wifi06.png?v=1650559102","\/\/www.digitmakers.ca\/cdn\/shop\/products\/Duet2Wifi03.png?v=1650559113","\/\/www.digitmakers.ca\/cdn\/shop\/products\/Duet2WifiV1_04c_04.png?v=1659630272","\/\/www.digitmakers.ca\/cdn\/shop\/products\/Duet2WifiV1_04c_01.png?v=1659630273"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Duet2Wifi06.png?v=1650559102","options":["Title"],"media":[{"alt":"Duet 2 WiFi 3D Printer Controller V1.04 - Digitmakers.ca","id":29986754560230,"position":1,"preview_image":{"aspect_ratio":1.237,"height":1920,"width":2375,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Duet2Wifi06.png?v=1650559102"},"aspect_ratio":1.237,"height":1920,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Duet2Wifi06.png?v=1650559102","width":2375},{"alt":"Duet 2 WiFi 3D Printer Controller V1.04 - Digitmakers.ca","id":29986756034790,"position":2,"preview_image":{"aspect_ratio":1.603,"height":1198,"width":1920,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Duet2Wifi03.png?v=1650559113"},"aspect_ratio":1.603,"height":1198,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Duet2Wifi03.png?v=1650559113","width":1920},{"alt":"Duet 2 WiFi 3D Printer Controller V1.04 - Digitmakers.ca","id":30662249513190,"position":3,"preview_image":{"aspect_ratio":1.518,"height":1265,"width":1920,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Duet2WifiV1_04c_04.png?v=1659630272"},"aspect_ratio":1.518,"height":1265,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Duet2WifiV1_04c_04.png?v=1659630272","width":1920},{"alt":"Duet 2 WiFi 3D Printer Controller V1.04 - Digitmakers.ca","id":30662249578726,"position":4,"preview_image":{"aspect_ratio":1.46,"height":1315,"width":1920,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Duet2WifiV1_04c_01.png?v=1659630273"},"aspect_ratio":1.46,"height":1315,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Duet2WifiV1_04c_01.png?v=1659630273","width":1920}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThis is the latest version of the Duet 2 Wifi, v1.05\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe DuetWifi is an advanced 32 bit electronics for the control of 3D printers and other CNC machines. It has the same features as the \u003ca href=\"https:\/\/www.digitmakers.ca\/products\/duet-ethernet\"\u003eDuet Ethernet\u003c\/a\u003e other than providing a WiFi connectivity rather than ethernet, \u003ca href=\"https:\/\/docs.duet3d.com\/en\/Duet3D_hardware\/Duet_2_family\/Duet_2_WiFi_Ethernet_Hardware_Overview\" target=\"_blank\"\u003efull feature description is available on the wiki\u003c\/a\u003e, in summary:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePowerful 32 Bit Processor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDedicated Wifi module\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuper quiet TMC2660 stepper drivers, up to 256 micro stepping.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh-speed SD card and support for a second SD external card if required.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual extruders on the main board, up to 5 more extruders on the expansion board.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh Power rating: Each stepper driver is capable of 2.8A motor current, currently limited in software to 2.4A. The bed heater channel is specifically designed for high current (18A).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConnect via PC, tablet or smartphone on the same network to the onboard web interface.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSetup your printer and update the firmware through the web interface.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll common 3D printer geometries are supported\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExpandable up to 7 extruders with Firmware support for mixing nozzles and remapping axes to use high power, external drivers.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupport for the \u003ca href=\"https:\/\/duet3d.com\/wiki\/PanelDue\" target=\"_blank\"\u003ePanelDue\u003c\/a\u003e: a full-color graphics touch screen - \u003ca href=\"https:\/\/spool3d.ca\/paneldue-display-driver-v1-1\/\"\u003eavailable here\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe recommend you purchase directly from Think3DPrint3D if you are located in the UK.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's in the box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDuet WifFi controller board\u003c\/li\u003e\n\u003cli\u003eUSB cable\u003c\/li\u003e\n\u003cli\u003eConnectors kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSetup documentation is available \u003ca href=\"https:\/\/docs.duet3d.com\/en\/User_manual\/Overview\/Getting_started_Duet_2_WiFi_Ethernet\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e"}
Duet 2 WiFi 3D Printer Controller V1.05
Get a free quotation for the product of your interest today. Choose from a wide range of 3D Printers , 3D Scanners, 3D Printing Filaments , 3D Resin & 3D Printing parts today ! Contact us today !
Contact us here!
We match all competitors pricing!
You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you're getting honest value for your money.
Price match for retail store
We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor's store or website (including shipping, handling and fees, if applicable within Canada)
Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.
Price match for online only website
If you find an identical item for less at a Canadian online only website, we will match their price (including shipping, handling and fees, if applicable).
How to price match in-store:
When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor's website.
How to price match on DigitMakers.ca
Please Email : Sales@digitmakers.ca
Please make sure you have the following information before contacting us so that we can assist you as quickly as possible:
- Your full name and phone number
- The complete URL (web address) of product page on the competitor's website (Canada Only Accepted)
- Details of the product name, brand and model
- Details of the price difference (including shipping, handling and other fees, if applicable)
Our goal is to provide everyday low prices on all of our Items
Related Products
Sale
J-HEAD MKIV HOTEND FOR REPRAP 3D PRINTERS
$30.00 $52.00
{"id":8053885515,"title":"J-HEAD MKIV HOTEND FOR REPRAP 3D PRINTERS","handle":"j-head-mkiv-hotend-for-reprap-3d-printers","description":"\u003cp\u003eJ-Head MKIV Hotend is innovative light weight and simple . it works with most reprap extruders. Comes with heater cartridge and Thermostier \u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e• Efficient heat transfer by eliminating the thermal conductivity from the hot end.\u003c\/li\u003e\n\u003cli\u003e• PTFE tubing (replaceable) connect or join between the PEEK insulator and the Aluminum Nozzle.\u003c\/li\u003e\n\u003cli\u003e• Light Weight\u003c\/li\u003e\n\u003cli\u003e• Plated with anodic oxide coating, which can resist oxidation corrosion and increase nozzle hardness, thus ensuring finer and more stable printing.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension:\u003c\/strong\u003e 0.83 in x 0.65 in x 2.72 in (2.1 cm x 1.65 cm x 6.92 cm) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Size:\u003c\/strong\u003e 0.4 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament Size:\u003c\/strong\u003e 1.75mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e : 4.94 oz (140 g)\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","published_at":"2017-01-28T12:33:42-05:00","created_at":"2017-01-28T12:33:42-05:00","vendor":"GENERIC","type":"Parts","tags":["3D Printers Hot end","electrical","J-Head","mechanical","nozzle","reprap"],"price":3000,"price_min":3000,"price_max":3000,"available":true,"price_varies":false,"compare_at_price":5200,"compare_at_price_min":5200,"compare_at_price_max":5200,"compare_at_price_varies":false,"variants":[{"id":26354891339,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EX003","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"J-HEAD MKIV HOTEND FOR REPRAP 3D PRINTERS","public_title":null,"options":["Default Title"],"price":3000,"weight":500,"compare_at_price":5200,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001370","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/j-head-mkiv-hotend-for-reprap-3d-printers-7_gif.jpg?v=1613452894"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/j-head-mkiv-hotend-for-reprap-3d-printers-7_gif.jpg?v=1613452894","options":["Title"],"media":[{"alt":"J-HEAD MKIV HOTEND FOR REPRAP 3D PRINTERS - Digitmakers.ca","id":94662787108,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/j-head-mkiv-hotend-for-reprap-3d-printers-7_gif.jpg?v=1613452894"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/j-head-mkiv-hotend-for-reprap-3d-printers-7_gif.jpg?v=1613452894","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eJ-Head MKIV Hotend is innovative light weight and simple . it works with most reprap extruders. Comes with heater cartridge and Thermostier \u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e• Efficient heat transfer by eliminating the thermal conductivity from the hot end.\u003c\/li\u003e\n\u003cli\u003e• PTFE tubing (replaceable) connect or join between the PEEK insulator and the Aluminum Nozzle.\u003c\/li\u003e\n\u003cli\u003e• Light Weight\u003c\/li\u003e\n\u003cli\u003e• Plated with anodic oxide coating, which can resist oxidation corrosion and increase nozzle hardness, thus ensuring finer and more stable printing.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension:\u003c\/strong\u003e 0.83 in x 0.65 in x 2.72 in (2.1 cm x 1.65 cm x 6.92 cm) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Size:\u003c\/strong\u003e 0.4 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament Size:\u003c\/strong\u003e 1.75mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e : 4.94 oz (140 g)\n\u003c\/li\u003e\n\u003c\/ol\u003e\n"}
J-HEAD MKIV HOTEND FOR REPRAP 3D PRINTERS
$30.00
J-Head MKIV Hotend is innovative light weight and simple . it works with most reprap extruders. Comes with heater cartridge and Thermostier • Efficient heat transfer by eliminating the thermal conductivity from the hot end. • PTFE tubing (replaceable) connect or join between the PEEK insulator and the Aluminum Nozzle. • Light Weight • Plated ...
Sale
{"id":8058612875,"title":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm","handle":"3d-printer-extruder-drive-gear-for-1-75mm-3mm-brass-pulley-5mm","description":"\u003cp\u003e3D Printer Extruder Drive Gear for 1.75mm \u0026amp; 3mm Filament – Brass Pulley 5mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 11 mm x 11 mm\u003c\/li\u003e\n\u003cli\u003eInner hole: 5 mm\u003c\/li\u003e\n\u003cli\u003eGear parts: 7 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Brass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFixed screw holes: the M3 thread, two fixed screw holes, fixed more strong, can better avoid skidding gear.\u003c\/p\u003e\n\u003cp\u003eGear diameter: 11 mm\u003c\/p\u003e\n\u003cp\u003eWithin the fixed screw: M3, six Angle\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 x 3D Printer Extruder Drive Gear for 1.75mm \u0026amp; 3mm Filament – Brass Pulley 5mm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","published_at":"2017-01-29T12:27:07-05:00","created_at":"2017-01-29T12:27:07-05:00","vendor":"GENERIC","type":"Parts","tags":["drive gear","extruder gear","gear","mechanical"],"price":200,"price_min":200,"price_max":200,"available":true,"price_varies":false,"compare_at_price":800,"compare_at_price_min":800,"compare_at_price_max":800,"compare_at_price_varies":false,"variants":[{"id":42274930327782,"title":"26T","option1":"26T","option2":null,"option3":null,"sku":"GEN-BRS-PLY-EXTR-GR-26T","requires_shipping":true,"taxable":true,"featured_image":{"id":39743513362662,"product_id":8058612875,"position":1,"created_at":"2023-08-08T21:00:36-04:00","updated_at":"2023-08-08T21:00:38-04:00","alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm Digitmakers.ca","width":620,"height":493,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-2326.png?v=1691542838","variant_ids":[42274930327782]},"available":true,"name":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm - 26T","public_title":"26T","options":["26T"],"price":200,"weight":500,"compare_at_price":800,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001250","featured_media":{"alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm Digitmakers.ca","id":32347639709926,"position":1,"preview_image":{"aspect_ratio":1.258,"height":493,"width":620,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-2326.png?v=1691542838"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42274930360550,"title":"40T","option1":"40T","option2":null,"option3":null,"sku":"GEN-BRS-PLY-EXTR-GR-40T","requires_shipping":true,"taxable":true,"featured_image":{"id":39743513460966,"product_id":8058612875,"position":2,"created_at":"2023-08-08T21:00:40-04:00","updated_at":"2023-08-08T21:00:42-04:00","alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm Digitmakers.ca","width":1854,"height":1853,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-915.jpg?v=1691542842","variant_ids":[42274930360550]},"available":true,"name":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm - 40T","public_title":"40T","options":["40T"],"price":200,"weight":500,"compare_at_price":800,"inventory_quantity":72,"inventory_management":"shopify","inventory_policy":"deny","barcode":"30360550","featured_media":{"alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm Digitmakers.ca","id":32347639873766,"position":2,"preview_image":{"aspect_ratio":1.001,"height":1853,"width":1854,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-915.jpg?v=1691542842"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-2326.png?v=1691542838","\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-915.jpg?v=1691542842"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-2326.png?v=1691542838","options":["Size"],"media":[{"alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm Digitmakers.ca","id":32347639709926,"position":1,"preview_image":{"aspect_ratio":1.258,"height":493,"width":620,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-2326.png?v=1691542838"},"aspect_ratio":1.258,"height":493,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-2326.png?v=1691542838","width":620},{"alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm Digitmakers.ca","id":32347639873766,"position":2,"preview_image":{"aspect_ratio":1.001,"height":1853,"width":1854,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-915.jpg?v=1691542842"},"aspect_ratio":1.001,"height":1853,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-915.jpg?v=1691542842","width":1854}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e3D Printer Extruder Drive Gear for 1.75mm \u0026amp; 3mm Filament – Brass Pulley 5mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 11 mm x 11 mm\u003c\/li\u003e\n\u003cli\u003eInner hole: 5 mm\u003c\/li\u003e\n\u003cli\u003eGear parts: 7 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Brass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFixed screw holes: the M3 thread, two fixed screw holes, fixed more strong, can better avoid skidding gear.\u003c\/p\u003e\n\u003cp\u003eGear diameter: 11 mm\u003c\/p\u003e\n\u003cp\u003eWithin the fixed screw: M3, six Angle\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 x 3D Printer Extruder Drive Gear for 1.75mm \u0026amp; 3mm Filament – Brass Pulley 5mm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n"}
3D Printer Extruder Drive Gear for 1.75mm & 3mm – Brass Pulley 5mm
$2.00
3D Printer Extruder Drive Gear for 1.75mm & 3mm Filament – Brass Pulley 5mm Description Size: 11 mm x 11 mm Inner hole: 5 mm Gear parts: 7 mm Material: Brass Fixed screw holes: the M3 thread, two fixed screw holes, fixed more strong, can better avoid skidding gear. Gear diameter: 11 mm Within the fixed screw: M3, six Angle Package Includ...
Sale
3D printer Flexible Helical Coupling Set of 2
$8.00 $9.00
{"id":8058603403,"title":"3D printer Flexible Helical Coupling Set of 2","handle":"3d-printer-flexible-helical-coupling-set-of-2","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 0.014 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHoles Size: \u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e5 mm \/ 8 mm\u003c\/li\u003e\n\u003cli\u003e6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength: \u003c\/strong\u003e25 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 2.4 x 1.7 x 1.9 cm \/ 0.94 x 0.67 x 0.75 inches\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-01-29T12:26:09-05:00","created_at":"2017-01-29T12:26:09-05:00","vendor":"GENERIC","type":"Parts","tags":["coupling","flexible coupling","mechanical"],"price":800,"price_min":800,"price_max":800,"available":true,"price_varies":false,"compare_at_price":900,"compare_at_price_min":900,"compare_at_price_max":900,"compare_at_price_varies":false,"variants":[{"id":39489904541858,"title":"5\/8mm","option1":"5\/8mm","option2":null,"option3":null,"sku":"FLEX-CPL-5-8MM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D printer Flexible Helical Coupling Set of 2 - 5\/8mm","public_title":"5\/8mm","options":["5\/8mm"],"price":800,"weight":100,"compare_at_price":900,"inventory_quantity":137,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001279","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39489904574626,"title":"6mm","option1":"6mm","option2":null,"option3":null,"sku":"FLEX-CPL-2-6MM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D printer Flexible Helical Coupling Set of 2 - 6mm","public_title":"6mm","options":["6mm"],"price":800,"weight":100,"compare_at_price":900,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":"04574626","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-printer-Flexible-Helical-Coupling-Set-of-2-Digitmakers-ca-683.png?v=1691542835"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-printer-Flexible-Helical-Coupling-Set-of-2-Digitmakers-ca-683.png?v=1691542835","options":["Size"],"media":[{"alt":"3D printer Flexible Helical Coupling Set of 2 Digitmakers.ca","id":32347639644390,"position":1,"preview_image":{"aspect_ratio":1.506,"height":362,"width":545,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-printer-Flexible-Helical-Coupling-Set-of-2-Digitmakers-ca-683.png?v=1691542835"},"aspect_ratio":1.506,"height":362,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-printer-Flexible-Helical-Coupling-Set-of-2-Digitmakers-ca-683.png?v=1691542835","width":545}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 0.014 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHoles Size: \u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e5 mm \/ 8 mm\u003c\/li\u003e\n\u003cli\u003e6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength: \u003c\/strong\u003e25 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 2.4 x 1.7 x 1.9 cm \/ 0.94 x 0.67 x 0.75 inches\u003c\/li\u003e\n\u003c\/ul\u003e"}
3D printer Flexible Helical Coupling Set of 2
$8.00
Product Weight: 0.014 kg Holes Size: 5 mm / 8 mm 6 mm Length: 25 mm Product Size: 2.4 x 1.7 x 1.9 cm / 0.94 x 0.67 x 0.75 inches
Sale
3D printer Heatsink 40*40*11mm heating block
$2.00 $4.00
{"id":8053886091,"title":"3D printer Heatsink 40*40*11mm heating block","handle":"3d-printer-heat-sink-40-40-11cm-heating-block","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter hole goods size :\u003c\/strong\u003e 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew mounting hole: \u003c\/strong\u003e3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting holes from:\u003c\/strong\u003e 31 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFin length:\u003c\/strong\u003e 40 mm ,\u003cstrong\u003ewidth:\u003c\/strong\u003e 40 mm, Thickness: \u003cstrong\u003e11 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n","published_at":"2017-01-28T12:33:45-05:00","created_at":"2017-01-28T12:33:45-05:00","vendor":"GENERIC","type":"Parts","tags":["generic","Heat sink","heatsink","mechanical"],"price":200,"price_min":200,"price_max":200,"available":true,"price_varies":false,"compare_at_price":400,"compare_at_price_min":400,"compare_at_price_max":400,"compare_at_price_varies":false,"variants":[{"id":26354891915,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GEN-PT-HTBLKHTSNK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D printer Heatsink 40*40*11mm heating block","public_title":null,"options":["Default Title"],"price":200,"weight":100,"compare_at_price":400,"inventory_quantity":25,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001368","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-printer-Heatsink-40-40-11mm-heating-block-Digitmakers-ca-9492.png?v=1691543517"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-printer-Heatsink-40-40-11mm-heating-block-Digitmakers-ca-9492.png?v=1691543517","options":["Title"],"media":[{"alt":"3D printer Heatsink 40*40*11mm heating block Digitmakers.ca","id":32347650523366,"position":1,"preview_image":{"aspect_ratio":1.098,"height":569,"width":625,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-printer-Heatsink-40-40-11mm-heating-block-Digitmakers-ca-9492.png?v=1691543517"},"aspect_ratio":1.098,"height":569,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-printer-Heatsink-40-40-11mm-heating-block-Digitmakers-ca-9492.png?v=1691543517","width":625}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter hole goods size :\u003c\/strong\u003e 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew mounting hole: \u003c\/strong\u003e3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting holes from:\u003c\/strong\u003e 31 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFin length:\u003c\/strong\u003e 40 mm ,\u003cstrong\u003ewidth:\u003c\/strong\u003e 40 mm, Thickness: \u003cstrong\u003e11 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n"}
3D printer Heatsink 40*40*11mm heating block
$2.00
Center hole goods size : 12 mm Screw mounting hole: 3 mm Mounting holes from: 31 mm Fin length: 40 mm ,width: 40 mm, Thickness: 11 mm
Sale
Generic MK10 PTFE Tube
$3.00 $6.00
{"id":8058589387,"title":"Generic MK10 PTFE Tube","handle":"3d-printer-mk10-ptfe-tube","description":"\u003cp\u003eMK10 PTFE insert ID2 mm , OD 4 mm\u003c\/p\u003e\n\u003cp\u003eThe PTFE used inside the MK10 Extruder to provide smooth way to the filament and prevent the filament from deforming before it reaches the nozzle.\u003c\/p\u003e\n\u003cp\u003e Approximately 60mm long.\u003c\/p\u003e","published_at":"2017-01-29T12:24:39-05:00","created_at":"2017-01-29T12:24:39-05:00","vendor":"GENERIC","type":"Parts","tags":["mechanical","mk10 ptfe","ptfe","PTFE tube","ptfe-tubing","reprap"],"price":300,"price_min":300,"price_max":300,"available":true,"price_varies":false,"compare_at_price":600,"compare_at_price_min":600,"compare_at_price_max":600,"compare_at_price_varies":false,"variants":[{"id":26393769483,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EX001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Generic MK10 PTFE Tube","public_title":null,"options":["Default Title"],"price":300,"weight":200,"compare_at_price":600,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001321","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/MK10-PTFE-Tube.jpg?v=1613452898"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/MK10-PTFE-Tube.jpg?v=1613452898","options":["Title"],"media":[{"alt":"3D Printer MK10 PTFE Tube - Digitmakers.ca","id":94737465380,"position":1,"preview_image":{"aspect_ratio":1.777,"height":893,"width":1587,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/MK10-PTFE-Tube.jpg?v=1613452898"},"aspect_ratio":1.777,"height":893,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/MK10-PTFE-Tube.jpg?v=1613452898","width":1587}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eMK10 PTFE insert ID2 mm , OD 4 mm\u003c\/p\u003e\n\u003cp\u003eThe PTFE used inside the MK10 Extruder to provide smooth way to the filament and prevent the filament from deforming before it reaches the nozzle.\u003c\/p\u003e\n\u003cp\u003e Approximately 60mm long.\u003c\/p\u003e"}
Generic MK10 PTFE Tube
$3.00
MK10 PTFE insert ID2 mm , OD 4 mm The PTFE used inside the MK10 Extruder to provide smooth way to the filament and prevent the filament from deforming before it reaches the nozzle. Approximately 60mm long.
{"id":8058599371,"title":"Long Type Linear Ball Bearing Bushing LM8LUU","handle":"long-type-linear-ball-bearing-bushing-lm8luu","description":"\u003cp style=\"text-align: center;\"\u003eLong Type Linear Ball Bearing Bushing\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eModel:LM8LUU\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 8mm(ID)x15mm(OD)x45mm(L)\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eUpgrade your 3D printer and reduce the play in the linear ball bearing . This longer Linear bearing provide more stability and smoothness to your x, y axis.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e","published_at":"2017-01-29T12:25:40-05:00","created_at":"2017-01-29T12:25:40-05:00","vendor":"GENERIC","type":"Parts","tags":["3D parts","lead screw","Linear Bearing","mechanical"],"price":400,"price_min":400,"price_max":400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":26393810699,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GEN-BER-LM8LUU","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Long Type Linear Ball Bearing Bushing LM8LUU","public_title":null,"options":["Default Title"],"price":400,"weight":300,"compare_at_price":null,"inventory_quantity":126,"inventory_management":"shopify","inventory_policy":"deny","barcode":"15000131","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/Lm8luu-8mm-x45-mm-Bearing_800x_ba7c3c86-d989-44a7-9dae-072956cbe457.jpg?v=1613452900"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Lm8luu-8mm-x45-mm-Bearing_800x_ba7c3c86-d989-44a7-9dae-072956cbe457.jpg?v=1613452900","options":["Title"],"media":[{"alt":"Long Type Linear Ball Bearing Bushing LM8LUU - Digitmakers.ca","id":2203222474883,"position":1,"preview_image":{"aspect_ratio":1.353,"height":521,"width":705,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Lm8luu-8mm-x45-mm-Bearing_800x_ba7c3c86-d989-44a7-9dae-072956cbe457.jpg?v=1613452900"},"aspect_ratio":1.353,"height":521,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Lm8luu-8mm-x45-mm-Bearing_800x_ba7c3c86-d989-44a7-9dae-072956cbe457.jpg?v=1613452900","width":705}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp style=\"text-align: center;\"\u003eLong Type Linear Ball Bearing Bushing\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eModel:LM8LUU\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 8mm(ID)x15mm(OD)x45mm(L)\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eUpgrade your 3D printer and reduce the play in the linear ball bearing . This longer Linear bearing provide more stability and smoothness to your x, y axis.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e"}
Long Type Linear Ball Bearing Bushing LM8LUU
$4.00
Long Type Linear Ball Bearing Bushing Model:LM8LUU Size: 8mm(ID)x15mm(OD)x45mm(L) Upgrade your 3D printer and reduce the play in the linear ball bearing . This longer Linear bearing provide more stability and smoothness to your x, y axis.
Sale
{"id":8058620491,"title":"Micro Swiss All Metal Hotend with SLOTTED Cooling Block for Duplicator 6","handle":"micro-swiss-all-metal-hotend-with-slotted-cooling-block-for-duplicator-6","description":"\u003cp\u003eThis is Micro Swiss All Metal Hotend kit for Wanhao Duplicator 6 with the following enhancement :\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eSlotted Clamping system\u003c\/li\u003e\n\u003cli\u003eNo set screw to ding and damage the thermal tube\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignificantly better heat transfer (this is a big one!!!)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eEasier disassembly and adjustments\u003c\/li\u003e\n\u003cli\u003ePrecise control on bore diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicro Swiss All Metal Hotend Kit Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. The thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel is used for thermal break because it offers low thermal conductivity, and aluminum is used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotends will let you print at much higher temperature than possible with original PTFE lined ones.All metal hotend is designed to be more consistent melt chamber control. During slow extrusion rates, in PTFE lined hotends, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With an all metal design, a transition zone is always constant, being located right at the heat break. With fast extrusion rates, PTFE tube don't have enough thermal conductivity to properly melt all the plastic coming out. On original extruders, that limitation happens around 60 mm\/s, depending on nozzle size. All metal hotends solve this problem - plastic is surrounded by a thermally conductive nozzle throughout its length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e1 Plated Brass Wear Resistant Nozzle (0.4mm)\u003c\/li\u003e\n\u003cli\u003e1 Thermal tube\u003c\/li\u003e\n\u003cli\u003e1 Slotted Cooling block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/09\/MICRO_SWISS_HOTEND_4_WANHAO_D6_STEP_BY_STEP_INSTALATION_INSTRUCTIONS.pdf\"\u003emicro_swiss_hotend_4_wanhao_d6_step_by_step_instalation_instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-29T12:27:00-05:00","created_at":"2017-01-29T12:27:57-05:00","vendor":"MicroSwiss","type":"Parts","tags":["D6","Duplicator 6","Duplicator 6S","extruder","hotend","mechanical","microswiss","mk10","wanhao"],"price":5600,"price_min":5600,"price_max":5600,"available":true,"price_varies":false,"compare_at_price":6300,"compare_at_price_min":6300,"compare_at_price_max":6300,"compare_at_price_varies":false,"variants":[{"id":26393915851,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MSW-MT-HTEND-SLCB-DUPL6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Micro Swiss All Metal Hotend with SLOTTED Cooling Block for Duplicator 6","public_title":null,"options":["Default Title"],"price":5600,"weight":500,"compare_at_price":6300,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"866086000286","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/wanhao_d6_all_metal_upgrade_digitmakers.ca.jpg?v=1613452908"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/wanhao_d6_all_metal_upgrade_digitmakers.ca.jpg?v=1613452908","options":["Title"],"media":[{"alt":"Micro Swiss All Metal Hotend with SLOTTED Cooling Block for Duplicator 6 - Digitmakers.ca","id":94741987364,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/wanhao_d6_all_metal_upgrade_digitmakers.ca.jpg?v=1613452908"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/wanhao_d6_all_metal_upgrade_digitmakers.ca.jpg?v=1613452908","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis is Micro Swiss All Metal Hotend kit for Wanhao Duplicator 6 with the following enhancement :\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eSlotted Clamping system\u003c\/li\u003e\n\u003cli\u003eNo set screw to ding and damage the thermal tube\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignificantly better heat transfer (this is a big one!!!)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eEasier disassembly and adjustments\u003c\/li\u003e\n\u003cli\u003ePrecise control on bore diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicro Swiss All Metal Hotend Kit Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. The thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel is used for thermal break because it offers low thermal conductivity, and aluminum is used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotends will let you print at much higher temperature than possible with original PTFE lined ones.All metal hotend is designed to be more consistent melt chamber control. During slow extrusion rates, in PTFE lined hotends, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With an all metal design, a transition zone is always constant, being located right at the heat break. With fast extrusion rates, PTFE tube don't have enough thermal conductivity to properly melt all the plastic coming out. On original extruders, that limitation happens around 60 mm\/s, depending on nozzle size. All metal hotends solve this problem - plastic is surrounded by a thermally conductive nozzle throughout its length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e1 Plated Brass Wear Resistant Nozzle (0.4mm)\u003c\/li\u003e\n\u003cli\u003e1 Thermal tube\u003c\/li\u003e\n\u003cli\u003e1 Slotted Cooling block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/09\/MICRO_SWISS_HOTEND_4_WANHAO_D6_STEP_BY_STEP_INSTALATION_INSTRUCTIONS.pdf\"\u003emicro_swiss_hotend_4_wanhao_d6_step_by_step_instalation_instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
Micro Swiss All Metal Hotend with SLOTTED Cooling Block for Duplicator 6
$56.00
This is Micro Swiss All Metal Hotend kit for Wanhao Duplicator 6 with the following enhancement : Slotted Clamping system No set screw to ding and damage the thermal tube Significantly better heat transfer (this is a big one!!!) Easier disassembly and adjustments Precise control on bore diameter Micro Swiss All Metal Hotend Kit Feature...
Sale
Micro Swiss MK10 SLOTTED Cooling Block
$22.00 $26.00
{"id":8058621643,"title":"Micro Swiss MK10 SLOTTED Cooling Block","handle":"micro-swiss-mk10-slotted-cooling-block","description":"\u003cp\u003eThis is redesigned cooling block for Wanhao i3 and Wanhao i3 plus with the following improvements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlotted Clamping system\u003c\/li\u003e\n\u003cli\u003eNo set screw to ding and damage thermal tube\u003c\/li\u003e\n\u003cli\u003eSignificantly better heat transfer\u003c\/li\u003e\n\u003cli\u003eEasier disassemble and adjustments\u003c\/li\u003e\n\u003cli\u003ePrecise control on bore diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis cooling block will work with original PTFE lined hotend, and with our Micro Swiss MK10 all metal hotend.\u003c\/p\u003e","published_at":"2017-01-29T12:28:06-05:00","created_at":"2017-01-29T12:28:06-05:00","vendor":"MicroSwiss","type":"Parts","tags":["heat block","mechanical","microswiss","mk10"],"price":2200,"price_min":2200,"price_max":2200,"available":true,"price_varies":false,"compare_at_price":2600,"compare_at_price_min":2600,"compare_at_price_max":2600,"compare_at_price_varies":false,"variants":[{"id":26393917259,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MSW-MT-HTEND-SLCB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Micro Swiss MK10 SLOTTED Cooling Block","public_title":null,"options":["Default Title"],"price":2200,"weight":300,"compare_at_price":2600,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"866086000217","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/i3_block_1_1024x1024__87931.1465089625.1280.1280.jpg?v=1613452908"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/i3_block_1_1024x1024__87931.1465089625.1280.1280.jpg?v=1613452908","options":["Title"],"media":[{"alt":"Micro Swiss MK10 SLOTTED Cooling Block - Digitmakers.ca","id":94742151204,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/i3_block_1_1024x1024__87931.1465089625.1280.1280.jpg?v=1613452908"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/i3_block_1_1024x1024__87931.1465089625.1280.1280.jpg?v=1613452908","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis is redesigned cooling block for Wanhao i3 and Wanhao i3 plus with the following improvements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlotted Clamping system\u003c\/li\u003e\n\u003cli\u003eNo set screw to ding and damage thermal tube\u003c\/li\u003e\n\u003cli\u003eSignificantly better heat transfer\u003c\/li\u003e\n\u003cli\u003eEasier disassemble and adjustments\u003c\/li\u003e\n\u003cli\u003ePrecise control on bore diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis cooling block will work with original PTFE lined hotend, and with our Micro Swiss MK10 all metal hotend.\u003c\/p\u003e"}
Micro Swiss MK10 SLOTTED Cooling Block
$22.00
This is redesigned cooling block for Wanhao i3 and Wanhao i3 plus with the following improvements: Slotted Clamping system No set screw to ding and damage thermal tube Significantly better heat transfer Easier disassemble and adjustments Precise control on bore diameter This cooling block will work with original PTFE lined hotend, and w...
Lead Screw with Nut 500mm
$15.00
{"id":8053885899,"title":"Lead Screw with Nut 500mm","handle":"two-lead-screws-diameter-length-600mm","description":"\u003cp\u003e\u003cstrong\u003eLead Screws with Nut\u003c\/strong\u003e\u003cbr\u003e Used for Z axis 3D printer , Upgrade your printer and print longer parts.\u003cbr\u003e \u003cstrong\u003eLead Screw Diameter\u003c\/strong\u003e: 8mm\u003cbr\u003e \u003cstrong\u003eScrew Pitch\u003c\/strong\u003e: 2mm\u003cbr\u003e \u003cstrong\u003eLead\u003c\/strong\u003e: 8mm\u003cbr\u003e \u003cstrong\u003eLead Screw Length\u003c\/strong\u003e: 500mm\u003c\/p\u003e","published_at":"2017-01-28T12:33:00-05:00","created_at":"2017-01-28T12:33:44-05:00","vendor":"GENERIC","type":"Parts","tags":["3D parts","lead","lead screw","leadscrew","mechanical","new-arrivals","nut","screw"],"price":1500,"price_min":1500,"price_max":1500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":26354891723,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GEN-LDSCRW-NUT-500MM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Lead Screw with Nut 500mm","public_title":null,"options":["Default Title"],"price":1500,"weight":2000,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001369","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/51PE4Fx550L._SL1005.jpg?v=1613452894"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/51PE4Fx550L._SL1005.jpg?v=1613452894","options":["Title"],"media":[{"alt":"Lead Screw with Nut 500mm - Digitmakers.ca","id":94662819876,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1005,"width":1005,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/51PE4Fx550L._SL1005.jpg?v=1613452894"},"aspect_ratio":1.0,"height":1005,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/51PE4Fx550L._SL1005.jpg?v=1613452894","width":1005}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eLead Screws with Nut\u003c\/strong\u003e\u003cbr\u003e Used for Z axis 3D printer , Upgrade your printer and print longer parts.\u003cbr\u003e \u003cstrong\u003eLead Screw Diameter\u003c\/strong\u003e: 8mm\u003cbr\u003e \u003cstrong\u003eScrew Pitch\u003c\/strong\u003e: 2mm\u003cbr\u003e \u003cstrong\u003eLead\u003c\/strong\u003e: 8mm\u003cbr\u003e \u003cstrong\u003eLead Screw Length\u003c\/strong\u003e: 500mm\u003c\/p\u003e"}
Lead Screw with Nut 500mm
$15.00
Lead Screws with Nut Used for Z axis 3D printer , Upgrade your printer and print longer parts. Lead Screw Diameter: 8mm Screw Pitch: 2mm Lead: 8mm Lead Screw Length: 500mm
Sale
3D PRINTER HEATER CARTRIDGE 12V 40W FOR HOTEND
$6.00 $11.00
{"id":8058575051,"title":"3D PRINTER HEATER CARTRIDGE 12V 40W FOR HOTEND","handle":"3d-printer-heater-cartridge-12v-40w-for-hotend","description":"\u003cp id=\"product-name\" class=\"fn\"\u003eHEATER CARTRIDGE 12V 40W FOR HOTEND\u003c\/p\u003e\n\u003ctable style=\"height: 204px;\" border=\"1\" width=\"631\" cellspacing=\"1\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeature\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless Steel, PVC, Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance\u003c\/td\u003e\n\u003ctd\u003e5 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater size\u003c\/td\u003e\n\u003ctd\u003e6x20mm(D*L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Length\u003c\/td\u003e\n\u003ctd\u003e500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-29T12:23:17-05:00","created_at":"2017-01-29T12:23:17-05:00","vendor":"GENERIC","type":"Parts","tags":["Cartridge","electrical","heater cartridge"],"price":600,"price_min":600,"price_max":600,"available":true,"price_varies":false,"compare_at_price":1100,"compare_at_price_min":1100,"compare_at_price_max":1100,"compare_at_price_varies":false,"variants":[{"id":26393695883,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CRTG-HTR-12V-40W","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D PRINTER HEATER CARTRIDGE 12V 40W FOR HOTEND","public_title":null,"options":["Default Title"],"price":600,"weight":400,"compare_at_price":1100,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"93695883","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-HEATER-CARTRIDGE-12V-40W-FOR-HOTEND-Digitmakers-ca-129.jpg?v=1691538844"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-HEATER-CARTRIDGE-12V-40W-FOR-HOTEND-Digitmakers-ca-129.jpg?v=1691538844","options":["Title"],"media":[{"alt":"3D PRINTER HEATER CARTRIDGE 12V 40W FOR HOTEND Digitmakers.ca","id":32347567325414,"position":1,"preview_image":{"aspect_ratio":0.75,"height":800,"width":600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-HEATER-CARTRIDGE-12V-40W-FOR-HOTEND-Digitmakers-ca-129.jpg?v=1691538844"},"aspect_ratio":0.75,"height":800,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-HEATER-CARTRIDGE-12V-40W-FOR-HOTEND-Digitmakers-ca-129.jpg?v=1691538844","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp id=\"product-name\" class=\"fn\"\u003eHEATER CARTRIDGE 12V 40W FOR HOTEND\u003c\/p\u003e\n\u003ctable style=\"height: 204px;\" border=\"1\" width=\"631\" cellspacing=\"1\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeature\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless Steel, PVC, Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance\u003c\/td\u003e\n\u003ctd\u003e5 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater size\u003c\/td\u003e\n\u003ctd\u003e6x20mm(D*L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Length\u003c\/td\u003e\n\u003ctd\u003e500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e"}
3D PRINTER HEATER CARTRIDGE 12V 40W FOR HOTEND
$6.00
HEATER CARTRIDGE 12V 40W FOR HOTEND Feature Material Stainless Steel, PVC, Nylon Voltage 12V Power 40W Resistance 5 ohm Heater size 6x20mm(D*L) Wire Length 500mm
{"id":8058612683,"title":"3D PRINTER HEATER CARTRIDGE 24V 40W FOR HOTEND","handle":"3d-printer-heater-cartridge-24v-40w-for-hotend","description":"\u003cp id=\"product-name\" class=\"fn\"\u003eHEATER CARTRIDGE 24 V 40W FOR HOTEND\u003c\/p\u003e\n\u003ctable style=\"height: 295px;\" border=\"1\" width=\"241\" cellspacing=\"1\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeature\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless Steel, PVC, Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater (D*L)Wire Length500mmResistance\u003c\/td\u003e\n\u003ctd\u003esize6x20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater size\u003c\/td\u003e\n\u003ctd\u003e6x20mm(D*L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Length\u003c\/td\u003e\n\u003ctd\u003e500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-29T12:27:06-05:00","created_at":"2017-01-29T12:27:06-05:00","vendor":"GENERIC","type":"Parts","tags":["12 volts","3D parts","3D Printing","Cartridge","electrical","Heater","heater cartridge"],"price":600,"price_min":600,"price_max":600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":26393879115,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CRTG-HTR-24V-40W","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D PRINTER HEATER CARTRIDGE 24V 40W FOR HOTEND","public_title":null,"options":["Default Title"],"price":600,"weight":400,"compare_at_price":null,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":"00001000664","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-HEATER-CARTRIDGE-24V-40W-FOR-HOTEND-Digitmakers-ca-9525.jpg?v=1691538846"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-HEATER-CARTRIDGE-24V-40W-FOR-HOTEND-Digitmakers-ca-9525.jpg?v=1691538846","options":["Title"],"media":[{"alt":"3D PRINTER HEATER CARTRIDGE 24V 40W FOR HOTEND Digitmakers.ca","id":32347567358182,"position":1,"preview_image":{"aspect_ratio":0.75,"height":800,"width":600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-HEATER-CARTRIDGE-24V-40W-FOR-HOTEND-Digitmakers-ca-9525.jpg?v=1691538846"},"aspect_ratio":0.75,"height":800,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-HEATER-CARTRIDGE-24V-40W-FOR-HOTEND-Digitmakers-ca-9525.jpg?v=1691538846","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp id=\"product-name\" class=\"fn\"\u003eHEATER CARTRIDGE 24 V 40W FOR HOTEND\u003c\/p\u003e\n\u003ctable style=\"height: 295px;\" border=\"1\" width=\"241\" cellspacing=\"1\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeature\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless Steel, PVC, Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater (D*L)Wire Length500mmResistance\u003c\/td\u003e\n\u003ctd\u003esize6x20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater size\u003c\/td\u003e\n\u003ctd\u003e6x20mm(D*L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Length\u003c\/td\u003e\n\u003ctd\u003e500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e"}
3D PRINTER HEATER CARTRIDGE 24V 40W FOR HOTEND
$6.00
HEATER CARTRIDGE 24 V 40W FOR HOTEND Feature Material Stainless Steel, PVC, Nylon Voltage 24 V Power 40W Heater (D*L)Wire Length500mmResistance size6x20mm Heater size 6x20mm(D*L) Wire Length 500mm
Sold Out
{"id":8058589771,"title":"3D PRINTER 2004 LCD SMART CONTROLLER DISPLAY","handle":"3d-printer-2004-lcd-smart-controller-display","description":"\u003cp\u003e3D PRINTER REPRAP RAMPS 1.4 2004 LCD SMART CONTROLLER DISPLAY ADAPTER\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe controller includes an SD card reader, rotary encoders and a 20-character x 4 line LCD display.\u003c\/li\u003e\n\u003cli\u003eYou can easily connect it to your RAMPS 1.4 board using \"smart adapter\" (included).\u003c\/li\u003e\n\u003cli\u003e No need to your computer\u003c\/li\u003e\n\u003cli\u003eAll further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller. 3D design print without a computer, just use the G code stored on the SD card designs.\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-01-29T12:24:00-05:00","created_at":"2017-01-29T12:24:41-05:00","vendor":"GENERIC","type":"Parts","tags":["3D Printers Hot end","electrical","LCD"],"price":1500,"price_min":1500,"price_max":1500,"available":false,"price_varies":false,"compare_at_price":2600,"compare_at_price_min":2600,"compare_at_price_max":2600,"compare_at_price_varies":false,"variants":[{"id":26393773067,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CTRL-SMRT-LCD-2004","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"3D PRINTER 2004 LCD SMART CONTROLLER DISPLAY","public_title":null,"options":["Default Title"],"price":1500,"weight":800,"compare_at_price":2600,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"93773067","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-2004-LCD-SMART-CONTROLLER-DISPLAY-Digitmakers-ca-2661.png?v=1691540460"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-2004-LCD-SMART-CONTROLLER-DISPLAY-Digitmakers-ca-2661.png?v=1691540460","options":["Title"],"media":[{"alt":"3D PRINTER 2004 LCD SMART CONTROLLER DISPLAY Digitmakers.ca","id":32347591311590,"position":1,"preview_image":{"aspect_ratio":1.19,"height":453,"width":539,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-2004-LCD-SMART-CONTROLLER-DISPLAY-Digitmakers-ca-2661.png?v=1691540460"},"aspect_ratio":1.19,"height":453,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-2004-LCD-SMART-CONTROLLER-DISPLAY-Digitmakers-ca-2661.png?v=1691540460","width":539}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e3D PRINTER REPRAP RAMPS 1.4 2004 LCD SMART CONTROLLER DISPLAY ADAPTER\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe controller includes an SD card reader, rotary encoders and a 20-character x 4 line LCD display.\u003c\/li\u003e\n\u003cli\u003eYou can easily connect it to your RAMPS 1.4 board using \"smart adapter\" (included).\u003c\/li\u003e\n\u003cli\u003e No need to your computer\u003c\/li\u003e\n\u003cli\u003eAll further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller. 3D design print without a computer, just use the G code stored on the SD card designs.\u003c\/li\u003e\n\u003c\/ul\u003e"}
3D PRINTER 2004 LCD SMART CONTROLLER DISPLAY
$15.00
3D PRINTER REPRAP RAMPS 1.4 2004 LCD SMART CONTROLLER DISPLAY ADAPTER The controller includes an SD card reader, rotary encoders and a 20-character x 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using "smart adapter" (included). No need to your computer All further operations, such as calibration, the axis movement can...
