{"id":1459571556388,"title":"E3D V6 Plated Copper Heater Block","handle":"e3d-v6-plated-copper-heater-block","description":"\u003ch2\u003ePlated Copper-Alloy Heater Block\u003c\/h2\u003e\n\u003cp\u003eThese blocks are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminium blocks which begin to lose integrity beyond 350°C), and much-increased thermal conductivity these copper blocks are perfect for high temperature applications while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE.\u003c\/p\u003e\n\u003cp\u003eIn addition to high temperature performance these blocks have an advanced nickel based plating, this plating considerably reduces the adhesion of plastic to the block. This is great for everyday filaments keeping things clean and shiny, but is particularly important at temperatures above 300°C where a silicone sock can't be used.\u003c\/p\u003e\n\u003cp\u003eUse these blocks with our plated copper nozzles for the ultimate extrusion pairing!\u003c\/p\u003e\n\u003ch2\u003eWhy Copper?\u003c\/h2\u003e\n\u003cp\u003eCopper has more than 3x the thermal conductivity of brass, and the copper alloy has been plated to eliminate the oxidation that occurs in copper at high temperatures. A small side effect is that the copper's high thermal mass will also increase heat-up times, but will provide a tighter temperature control.\u003c\/p\u003e\n\u003cp\u003eThis copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C. It's perfect for the high-temperature printing that aluminium heater blocks can't handle.\u003c\/p\u003e\n\u003ch2 class=\"feature\"\u003eProduct Specs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCopper-alloy heater block with nickel plating\u003c\/li\u003e\n\u003cli\u003eResistant to temperatures beyond 500°C\u003c\/li\u003e\n\u003cli\u003eLaser-engraved with E3D logo\u003c\/li\u003e\n\u003cli\u003eVery shiny\u003c\/li\u003e\n\u003cli\u003enon-stick surface, to repel filament without a silicone sock\u003c\/li\u003e\n\u003cli\u003eCompatible with sensor cartridges and silicone socks.\u003c\/li\u003e\n\u003cli\u003eNote: silicone socks are not intended for use at temperatures exceeding 300°C. Similarly, upgrade to a PT100 if you are printing at high temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eE3D V6 plated copper alloy heater block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2019-07-08T18:51:55-04:00","created_at":"2019-07-08T18:51:55-04:00","vendor":"E3D","type":"Parts","tags":["Copper","copper block","e3D","E3d block","e3d v6","Heater Block","mechanical","new-arrivals","V6","v6 copper"],"price":3899,"price_min":3899,"price_max":3899,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":11703189340196,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"E3D-V6-CPR-HTRBLK-1.75","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E3D V6 Plated Copper Heater Block","public_title":null,"options":["Default Title"],"price":3899,"weight":700,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10000903"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/v6_plated_copper_block_1.png?v=1575565230"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/v6_plated_copper_block_1.png?v=1575565230","options":["Title"],"media":[{"alt":"E3D V6 Plated Copper Heater Block - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":1878798499971,"position":1,"preview_image":{"aspect_ratio":1.0,"height":240,"width":240,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/v6_plated_copper_block_1.png?v=1569329262"},"aspect_ratio":1.0,"height":240,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/v6_plated_copper_block_1.png?v=1569329262","width":240}],"content":"\u003ch2\u003ePlated Copper-Alloy Heater Block\u003c\/h2\u003e\n\u003cp\u003eThese blocks are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminium blocks which begin to lose integrity beyond 350°C), and much-increased thermal conductivity these copper blocks are perfect for high temperature applications while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE.\u003c\/p\u003e\n\u003cp\u003eIn addition to high temperature performance these blocks have an advanced nickel based plating, this plating considerably reduces the adhesion of plastic to the block. This is great for everyday filaments keeping things clean and shiny, but is particularly important at temperatures above 300°C where a silicone sock can't be used.\u003c\/p\u003e\n\u003cp\u003eUse these blocks with our plated copper nozzles for the ultimate extrusion pairing!\u003c\/p\u003e\n\u003ch2\u003eWhy Copper?\u003c\/h2\u003e\n\u003cp\u003eCopper has more than 3x the thermal conductivity of brass, and the copper alloy has been plated to eliminate the oxidation that occurs in copper at high temperatures. A small side effect is that the copper's high thermal mass will also increase heat-up times, but will provide a tighter temperature control.\u003c\/p\u003e\n\u003cp\u003eThis copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C. It's perfect for the high-temperature printing that aluminium heater blocks can't handle.\u003c\/p\u003e\n\u003ch2 class=\"feature\"\u003eProduct Specs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCopper-alloy heater block with nickel plating\u003c\/li\u003e\n\u003cli\u003eResistant to temperatures beyond 500°C\u003c\/li\u003e\n\u003cli\u003eLaser-engraved with E3D logo\u003c\/li\u003e\n\u003cli\u003eVery shiny\u003c\/li\u003e\n\u003cli\u003enon-stick surface, to repel filament without a silicone sock\u003c\/li\u003e\n\u003cli\u003eCompatible with sensor cartridges and silicone socks.\u003c\/li\u003e\n\u003cli\u003eNote: silicone socks are not intended for use at temperatures exceeding 300°C. Similarly, upgrade to a PT100 if you are printing at high temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eE3D V6 plated copper alloy heater block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}

E3D V6 Plated Copper Heater Block

Product Description
$38.99 CAD
Maximum quantity available reached.

Plated Copper-Alloy Heater Block

These blocks are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminium blocks which begin to lose integrity beyond 350°C), and much-increased thermal conductivity these copper blocks are perfect for high temperature applications while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE.

In addition to high temperature performance these blocks have an advanced nickel based plating, this plating considerably reduces the adhesion of plastic to the block. This is great for everyday filaments keeping things clean and shiny, but is particularly important at temperatures above 300°C where a silicone sock can't be used.

Use these blocks with our plated copper nozzles for the ultimate extrusion pairing!

Why Copper?

Copper has more than 3x the thermal conductivity of brass, and the copper alloy has been plated to eliminate the oxidation that occurs in copper at high temperatures. A small side effect is that the copper's high thermal mass will also increase heat-up times, but will provide a tighter temperature control.

This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C. It's perfect for the high-temperature printing that aluminium heater blocks can't handle.

Product Specs

  • Copper-alloy heater block with nickel plating
  • Resistant to temperatures beyond 500°C
  • Laser-engraved with E3D logo
  • Very shiny
  • non-stick surface, to repel filament without a silicone sock
  • Compatible with sensor cartridges and silicone socks.
  • Note: silicone socks are not intended for use at temperatures exceeding 300°C. Similarly, upgrade to a PT100 if you are printing at high temperatures.

Package Contents:

  • E3D V6 plated copper alloy heater block
      Sku: E3D-V6-CPR-HTRBLK-1.75
      Vendor: E3D
      Get a free quotation for the product of your interest today. Choose from a wide range of 3D Printers , 3D Scanners, 3D Printing Filaments , 3D Resin & 3D Printing parts today ! Contact us today !

      Price Match

       Contact us here!

      We match all competitors pricing!

      You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you're getting honest value for your money.

      Price match for retail store

      We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor's store or website (including shipping, handling and fees, if applicable within Canada)

      Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.

      Price match for online only website

      If you find an identical item for less at a Canadian online only website, we will match their price (including shipping, handling and fees, if applicable).

      How to price match in-store:

      When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor's website.

      How to price match on DigitMakers.ca

      Please Email : Sales@digitmakers.ca

      Please make sure you have the following information before contacting us so that we can assist you as quickly as possible:

      • Your full name and phone number
      • The complete URL (web address) of product page on the competitor's website (Canada Only Accepted) 
      • Details of the product name, brand and model
      • Details of the price difference (including shipping, handling and other fees, if applicable)

       

      Our goal is to provide everyday low prices on all of our Items 

      Related Products