{"id":8390106808550,"title":"Bambu Lab A1 Combo (PICKUP ONLY) - 3D Printer - ETL Certified","handle":"bambu-lab-a1-combo-3d-printer-etl-certified","description":"\u003ch1 class=\"sectionTitle\"\u003eBambu Lab A1 Combo\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eOnly Available For In Store Pick Up at North York.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2 class=\"sectionTitle\"\u003eFeatures\u003c\/h2\u003e\n\u003ch3 class=\"sectionTitle\"\u003eFull-Auto Calibration and Auto Bed Level\u003c\/h3\u003e\n\u003cp class=\"title\"\u003e\u003cstrong\u003eGoodbye to Tedious Manual Calibration And Tuning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"desc\"\u003eA1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3 class=\"sectionTitle\"\u003eAuto Z-Offset\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNo More \"Paper Method\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA1 probes the bed with the nozzle to measure the absolute Z-offset. No need to stick a paper as reference.\u003c\/p\u003e\n\u003ch3 class=\"sectionTitle\"\u003eAuto Vibration Calibration\u003c\/h3\u003e\n\u003cp class=\"title\"\u003e\u003cstrong\u003eAuto Tune Both X \u0026amp; Y Resonance Before Every Print\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"desc\"\u003eA1 has sensors in toolhead and heatbed. One of the very first bed-slinger printers to run auto resonance calibration on both X \u0026amp; Y axes.\u003c\/p\u003e\n\u003ch3 class=\"sectionTitle\"\u003eAuto Flow Dynamics\u003c\/h3\u003e\n\u003cp class=\"title\"\u003e\u003cstrong\u003eFully Automated PA (Pressure Advanced) Calibration\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"desc\"\u003eFirst of its kind, A1 runs the nozzle pressure based flow dynamics calibration algorithm. No need to draw any pattern or get any manual pick \u0026amp; match involved, A1 handles Pressure Advanced calibration automatically.\u003c\/p\u003e\n\u003ch3 class=\"desc\"\u003eAuto Belt Tension\u003c\/h3\u003e\n\u003cp class=\"title\"\u003e\u003cstrong\u003eAuto Monitoring And Adjusting The Belts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA1 can check the belt tension automatically through the vibration frequency calibration. If the belt tension is loose the HMS system will notify you to adjust the auto belt tensioner.\u003c\/p\u003e\n\u003ch3 class=\"desc\"\u003eAuto Filament Loading\u003c\/h3\u003e\n\u003cp class=\"desc\"\u003e\u003cstrong\u003eLoad\/Unload Filament With One Touch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"desc\"\u003eNo manual setting involved, A1 fully automated the filament load\/unload process.\u003c\/p\u003e\n\u003ch3 class=\"desc\"\u003eSwift Maintenance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQuick Swap Nozzles\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll-new quick swap hotend design, the hotend pops in and out with just 1 clip.\u003c\/p\u003e\n\u003ch3 class=\"sectionTitle\"\u003eAMS lite\u003c\/h3\u003e\n\u003cp class=\"title\"\u003e\u003cstrong\u003eMulti-Color Printing For Everyone\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"desc\"\u003eThe all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.\u003c\/p\u003e\n\u003ch3 class=\"sectionTitle\"\u003eActive Flow Rate Compensation\u003c\/h3\u003e\n\u003cp class=\"sectionTitle\"\u003e\u003cstrong\u003ePrint Smooth At Every Corner, Always\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"desc\"\u003eThe A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy. \u003c\/p\u003e\n\u003ch3 class=\"sectionTitle\"\u003eHigh-speed Precision\u003c\/h3\u003e\n\u003cp class=\"title\"\u003e\u003cstrong\u003eBed Slinger with CoreXY Speed And Quality\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"desc\"\u003eFull-metal Rails, Rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.\u003c\/p\u003e\n\u003ch3 class=\"desc\"\u003eIntuitive UI\u003c\/h3\u003e\n\u003cp class=\"title\"\u003e\u003cstrong\u003eAs Easy As Your Smart Phone\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"desc\"\u003eA1 now has a simplified touchscreen UI system that walks you through all the hurdles. You don't have to be a 3D printing expert to use the A1.\u003c\/p\u003e\n\u003ch3 class=\"desc\"\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe style=\"font-size: 0.875rem;\" width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/bLf7CNtLCJc?si=UC3SF2So0xDUMEUI\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e","published_at":"2024-01-19T14:30:22-05:00","created_at":"2023-12-19T13:58:00-05:00","vendor":"Bambu Lab","type":"3D Printers","tags":["3D printer","3D printer in Canada","3d printer machine","3d printers","3d printers canada","a1","a1 combo","bambu lab a1","Bambu Lab Collection","newfront","ponly"],"price":75899,"price_min":75899,"price_max":75899,"available":false,"price_varies":false,"compare_at_price":89900,"compare_at_price_min":89900,"compare_at_price_max":89900,"compare_at_price_varies":false,"variants":[{"id":44146100175078,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PF002-A+SA005-US","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Bambu Lab A1 Combo (PICKUP ONLY) - 3D Printer - ETL Certified","public_title":null,"options":["Default Title"],"price":75899,"weight":35000,"compare_at_price":89900,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6975337036081","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/files\/A1-4.png?v=1703014497"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/A1-4.png?v=1703014497","options":["Title"],"media":[{"alt":"bambu lab a1","id":32818370150630,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/A1-4.png?v=1703014497"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/A1-4.png?v=1703014497","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1 class=\"sectionTitle\"\u003eBambu Lab A1 Combo\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eOnly Available For In Store Pick Up at North York.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2 class=\"sectionTitle\"\u003eFeatures\u003c\/h2\u003e\n\u003ch3 class=\"sectionTitle\"\u003eFull-Auto Calibration and Auto Bed Level\u003c\/h3\u003e\n\u003cp class=\"title\"\u003e\u003cstrong\u003eGoodbye to Tedious Manual Calibration And Tuning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"desc\"\u003eA1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3 class=\"sectionTitle\"\u003eAuto Z-Offset\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNo More \"Paper Method\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA1 probes the bed with the nozzle to measure the absolute Z-offset. No need to stick a paper as reference.\u003c\/p\u003e\n\u003ch3 class=\"sectionTitle\"\u003eAuto Vibration Calibration\u003c\/h3\u003e\n\u003cp class=\"title\"\u003e\u003cstrong\u003eAuto Tune Both X \u0026amp; Y Resonance Before Every Print\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"desc\"\u003eA1 has sensors in toolhead and heatbed. One of the very first bed-slinger printers to run auto resonance calibration on both X \u0026amp; Y axes.\u003c\/p\u003e\n\u003ch3 class=\"sectionTitle\"\u003eAuto Flow Dynamics\u003c\/h3\u003e\n\u003cp class=\"title\"\u003e\u003cstrong\u003eFully Automated PA (Pressure Advanced) Calibration\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"desc\"\u003eFirst of its kind, A1 runs the nozzle pressure based flow dynamics calibration algorithm. No need to draw any pattern or get any manual pick \u0026amp; match involved, A1 handles Pressure Advanced calibration automatically.\u003c\/p\u003e\n\u003ch3 class=\"desc\"\u003eAuto Belt Tension\u003c\/h3\u003e\n\u003cp class=\"title\"\u003e\u003cstrong\u003eAuto Monitoring And Adjusting The Belts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA1 can check the belt tension automatically through the vibration frequency calibration. If the belt tension is loose the HMS system will notify you to adjust the auto belt tensioner.\u003c\/p\u003e\n\u003ch3 class=\"desc\"\u003eAuto Filament Loading\u003c\/h3\u003e\n\u003cp class=\"desc\"\u003e\u003cstrong\u003eLoad\/Unload Filament With One Touch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"desc\"\u003eNo manual setting involved, A1 fully automated the filament load\/unload process.\u003c\/p\u003e\n\u003ch3 class=\"desc\"\u003eSwift Maintenance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQuick Swap Nozzles\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll-new quick swap hotend design, the hotend pops in and out with just 1 clip.\u003c\/p\u003e\n\u003ch3 class=\"sectionTitle\"\u003eAMS lite\u003c\/h3\u003e\n\u003cp class=\"title\"\u003e\u003cstrong\u003eMulti-Color Printing For Everyone\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"desc\"\u003eThe all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.\u003c\/p\u003e\n\u003ch3 class=\"sectionTitle\"\u003eActive Flow Rate Compensation\u003c\/h3\u003e\n\u003cp class=\"sectionTitle\"\u003e\u003cstrong\u003ePrint Smooth At Every Corner, Always\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"desc\"\u003eThe A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy. \u003c\/p\u003e\n\u003ch3 class=\"sectionTitle\"\u003eHigh-speed Precision\u003c\/h3\u003e\n\u003cp class=\"title\"\u003e\u003cstrong\u003eBed Slinger with CoreXY Speed And Quality\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"desc\"\u003eFull-metal Rails, Rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.\u003c\/p\u003e\n\u003ch3 class=\"desc\"\u003eIntuitive UI\u003c\/h3\u003e\n\u003cp class=\"title\"\u003e\u003cstrong\u003eAs Easy As Your Smart Phone\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"desc\"\u003eA1 now has a simplified touchscreen UI system that walks you through all the hurdles. You don't have to be a 3D printing expert to use the A1.\u003c\/p\u003e\n\u003ch3 class=\"desc\"\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe style=\"font-size: 0.875rem;\" width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/bLf7CNtLCJc?si=UC3SF2So0xDUMEUI\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e"}

Bambu Lab A1 Combo (PICKUP ONLY) - 3D Printer - ETL Certified

Name: Bambu Lab A1 Combo (PICKUP ONLY) - 3D Printer - ETL Certified
Rating: 5.0 (1 reviews)

Previous Product | Next Product

Product Description

$758.99 CAD $899.00 CAD

Maximum quantity available reached.

Description

Bambu Lab A1 Combo

Only Available For In Store Pick Up at North York.

Features

Full-Auto Calibration and Auto Bed Level

Goodbye to Tedious Manual Calibration And Tuning

A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

Auto Z-Offset

No More "Paper Method"

A1 probes the bed with the nozzle to measure the absolute Z-offset. No need to stick a paper as reference.

Auto Vibration Calibration

Auto Tune Both X & Y Resonance Before Every Print

A1 has sensors in toolhead and heatbed. One of the very first bed-slinger printers to run auto resonance calibration on both X & Y axes.

Auto Flow Dynamics

Fully Automated PA (Pressure Advanced) Calibration

First of its kind, A1 runs the nozzle pressure based flow dynamics calibration algorithm. No need to draw any pattern or get any manual pick & match involved, A1 handles Pressure Advanced calibration automatically.

Auto Belt Tension

Auto Monitoring And Adjusting The Belts

A1 can check the belt tension automatically through the vibration frequency calibration. If the belt tension is loose the HMS system will notify you to adjust the auto belt tensioner.

Auto Filament Loading

Load/Unload Filament With One Touch

No manual setting involved, A1 fully automated the filament load/unload process.

Swift Maintenance

Quick Swap Nozzles

All-new quick swap hotend design, the hotend pops in and out with just 1 clip.

AMS lite

Multi-Color Printing For Everyone

The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.

Active Flow Rate Compensation

Print Smooth At Every Corner, Always

The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

High-speed Precision

Bed Slinger with CoreXY Speed And Quality

Full-metal Rails, Rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

Intuitive UI

As Easy As Your Smart Phone

A1 now has a simplified touchscreen UI system that walks you through all the hurdles. You don't have to be a 3D printing expert to use the A1.

Sku: PF002-A+SA005-US

Vendor: Bambu Lab

Get a free quotation for the product of your interest today. Choose from a wide range of 3D Printers , 3D Scanners, 3D Printing Filaments , 3D Resin & 3D Printing parts today ! Contact us today !

Related Products

Sale

Filaments Depot Gradient PLA 1.75mm 1kg

$24.99 CAD $32.50 CAD

{"id":8589861945574,"title":"Filaments Depot Gradient PLA 1.75mm 1kg","handle":"filaments-depot-gradient-pla-1-75mm-1kg","description":"\u003ch2 data-mce-fragment=\"1\" style=\"text-align: center;\"\u003eNON-BRITTLE FORMULA\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/gradient_pla_listing_banner.png?v=1714156838\" width=\"554\" height=\"225\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFilaments Depot Gradient PLA is made from quality virgin PLA. Both PLA resin and \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ecolorant are food-grade material. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eM\u003c\/span\u003eade in Ontario, Canada using sophisticated extrusion equipment and high-tech drying technology, the filaments are monitored with live multi-axis micrometer, and computerized diameter monitoring technology, producing clean, repeatable and reproducible results.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Untitled-1_365a802f-5325-4d9f-a7b1-c70c1d6f6030.png?v=1713888289\" width=\"275\" height=\"275\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cimg style=\"font-size: 0.875rem; display: block; margin-left: auto; margin-right: auto;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Untitled-2_e82ef819-8dcb-461d-8fb0-d3734cdc5454.png?v=1713891546\" alt=\"\" width=\"413\" height=\"162\"\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-mce-fragment=\"1\"\u003eThere is an approximate 10cm transition from one color to the next.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ePLA can be printed with or without a heated print bed. However, if your 3D printer does have a heated bed, it is recommended that you set your bed temperature to approximately 60°C.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFirst layer usually 5°C-10°C higher than subsequent layers. PLA Gradient also sticks well to Glass with PVA Glue ,BuildTak, PEI, or blue tape.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e\u003cimg height=\"207\" width=\"510\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Untitled-3_f95b2f7b-a1a6-418e-9940-38eea92b75bc.png?v=1713896443\" alt=\"\"\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Untitled-5_0156f3cb-196d-4588-b3fc-4065f8b2829f.png?v=1713897938\" width=\"505\" height=\"205\"\u003e\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\" style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Untitled-4_e30150d0-a844-4da5-b0f4-7521a23bbd2f.png?v=1713894303\" width=\"459\" height=\"316\"\u003e\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eTo make it compatible with\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" rel=\"noopener\" href=\"https:\/\/www.digitmakers.ca\/products\/bambu-lab-ams-automatic-material-systems-1?variant=43861755625702\" target=\"_blank\" data-mce-href=\"https:\/\/www.digitmakers.ca\/products\/bambu-lab-ams-automatic-material-systems-1?variant=43861755625702\"\u003eBambu Lab AMS,\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eyou can use these \u003ca data-mce-fragment=\"1\" rel=\"noopener\" href=\"https:\/\/www.digitmakers.ca\/products\/cardboard-spool-ring-random-colorspool-sleeve-for-filaments-depot-and-d3d-sigma-random-color\" target=\"_blank\" data-mce-href=\"https:\/\/www.digitmakers.ca\/products\/cardboard-spool-ring-random-colorspool-sleeve-for-filaments-depot-and-d3d-sigma-random-color\"\u003eCardboard Spool Ring.\u003c\/a\u003e \u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/LWTMv94_Ves?si=DgiQZTJj1JcGIcSS\" height=\"300\" width=\"500\" allowfullscreen=\"\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","published_at":"2024-04-22T17:59:33-04:00","created_at":"2024-04-22T15:32:42-04:00","vendor":"Filaments Depot","type":"3D Printing Filaments","tags":["1.75mm","back in stock","dual Color","Filaments Depot (all)","gradient","Made In Canada","multicolor filament","multicolored","newfront","newly added","offer","PLA","Special PLA 1.75 mm","Special PLA 1.75mm","Standard PLA 1.75mm"],"price":2499,"price_min":2499,"price_max":2499,"available":true,"price_varies":false,"compare_at_price":3250,"compare_at_price_min":3250,"compare_at_price_max":3250,"compare_at_price_varies":false,"variants":[{"id":44757954199782,"title":"Emerald Shore (Blue-Green)","option1":"Emerald Shore (Blue-Green)","option2":null,"option3":null,"sku":"FD-PLA-GRADIENT-EMERALDSHORE","requires_shipping":true,"taxable":true,"featured_image":{"id":41017434013926,"product_id":8589861945574,"position":1,"created_at":"2024-04-24T18:03:15-04:00","updated_at":"2024-04-24T18:03:18-04:00","alt":null,"width":1548,"height":1500,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/emeraldshore4.png?v=1713996198","variant_ids":[44757954199782]},"available":true,"name":"Filaments Depot Gradient PLA 1.75mm 1kg - Emerald Shore (Blue-Green)","public_title":"Emerald Shore (Blue-Green)","options":["Emerald Shore (Blue-Green)"],"price":2499,"weight":1500,"compare_at_price":3250,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":"54199782","featured_media":{"alt":null,"id":33672153170150,"position":1,"preview_image":{"aspect_ratio":1.032,"height":1500,"width":1548,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/emeraldshore4.png?v=1713996198"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44780976996582,"title":"Camouflage (Army Green-Light Green)","option1":"Camouflage (Army Green-Light Green)","option2":null,"option3":null,"sku":"FD-PLA-GRADIENT-CAMOUFLAGE","requires_shipping":true,"taxable":true,"featured_image":{"id":41029127569638,"product_id":8589861945574,"position":4,"created_at":"2024-04-25T17:01:01-04:00","updated_at":"2024-04-26T15:29:37-04:00","alt":null,"width":1548,"height":1500,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Camou3.png?v=1714159777","variant_ids":[44780976996582]},"available":true,"name":"Filaments Depot Gradient PLA 1.75mm 1kg - Camouflage (Army Green-Light Green)","public_title":"Camouflage (Army Green-Light Green)","options":["Camouflage (Army Green-Light Green)"],"price":2499,"weight":1500,"compare_at_price":3250,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"76996582","featured_media":{"alt":null,"id":33684492976358,"position":4,"preview_image":{"aspect_ratio":1.032,"height":1500,"width":1548,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Camou3.png?v=1714159777"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/files\/emeraldshore4.png?v=1713996198","\/\/www.digitmakers.ca\/cdn\/shop\/files\/Emeraldcloseup.png?v=1714159777","\/\/www.digitmakers.ca\/cdn\/shop\/files\/emeraldshore3.png?v=1714159777","\/\/www.digitmakers.ca\/cdn\/shop\/files\/Camou3.png?v=1714159777","\/\/www.digitmakers.ca\/cdn\/shop\/files\/camou4.png?v=1714159777","\/\/www.digitmakers.ca\/cdn\/shop\/files\/Camou2.png?v=1714159777"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/emeraldshore4.png?v=1713996198","options":["Color"],"media":[{"alt":null,"id":33672153170150,"position":1,"preview_image":{"aspect_ratio":1.032,"height":1500,"width":1548,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/emeraldshore4.png?v=1713996198"},"aspect_ratio":1.032,"height":1500,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/emeraldshore4.png?v=1713996198","width":1548},{"alt":null,"id":33696368558310,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Emeraldcloseup.png?v=1714159777"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Emeraldcloseup.png?v=1714159777","width":1500},{"alt":null,"id":33672101527782,"position":3,"preview_image":{"aspect_ratio":1.032,"height":1500,"width":1548,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/emeraldshore3.png?v=1714159777"},"aspect_ratio":1.032,"height":1500,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/emeraldshore3.png?v=1714159777","width":1548},{"alt":null,"id":33684492976358,"position":4,"preview_image":{"aspect_ratio":1.032,"height":1500,"width":1548,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Camou3.png?v=1714159777"},"aspect_ratio":1.032,"height":1500,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Camou3.png?v=1714159777","width":1548},{"alt":null,"id":33696368525542,"position":5,"preview_image":{"aspect_ratio":1.032,"height":1500,"width":1548,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/camou4.png?v=1714159777"},"aspect_ratio":1.032,"height":1500,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/camou4.png?v=1714159777","width":1548},{"alt":null,"id":33672065974502,"position":6,"preview_image":{"aspect_ratio":1.032,"height":1500,"width":1548,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Camou2.png?v=1714159777"},"aspect_ratio":1.032,"height":1500,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Camou2.png?v=1714159777","width":1548}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2 data-mce-fragment=\"1\" style=\"text-align: center;\"\u003eNON-BRITTLE FORMULA\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/gradient_pla_listing_banner.png?v=1714156838\" width=\"554\" height=\"225\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFilaments Depot Gradient PLA is made from quality virgin PLA. Both PLA resin and \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ecolorant are food-grade material. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eM\u003c\/span\u003eade in Ontario, Canada using sophisticated extrusion equipment and high-tech drying technology, the filaments are monitored with live multi-axis micrometer, and computerized diameter monitoring technology, producing clean, repeatable and reproducible results.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Untitled-1_365a802f-5325-4d9f-a7b1-c70c1d6f6030.png?v=1713888289\" width=\"275\" height=\"275\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cimg style=\"font-size: 0.875rem; display: block; margin-left: auto; margin-right: auto;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Untitled-2_e82ef819-8dcb-461d-8fb0-d3734cdc5454.png?v=1713891546\" alt=\"\" width=\"413\" height=\"162\"\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-mce-fragment=\"1\"\u003eThere is an approximate 10cm transition from one color to the next.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ePLA can be printed with or without a heated print bed. However, if your 3D printer does have a heated bed, it is recommended that you set your bed temperature to approximately 60°C.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFirst layer usually 5°C-10°C higher than subsequent layers. PLA Gradient also sticks well to Glass with PVA Glue ,BuildTak, PEI, or blue tape.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e\u003cimg height=\"207\" width=\"510\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Untitled-3_f95b2f7b-a1a6-418e-9940-38eea92b75bc.png?v=1713896443\" alt=\"\"\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Untitled-5_0156f3cb-196d-4588-b3fc-4065f8b2829f.png?v=1713897938\" width=\"505\" height=\"205\"\u003e\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\" style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Untitled-4_e30150d0-a844-4da5-b0f4-7521a23bbd2f.png?v=1713894303\" width=\"459\" height=\"316\"\u003e\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eTo make it compatible with\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" rel=\"noopener\" href=\"https:\/\/www.digitmakers.ca\/products\/bambu-lab-ams-automatic-material-systems-1?variant=43861755625702\" target=\"_blank\" data-mce-href=\"https:\/\/www.digitmakers.ca\/products\/bambu-lab-ams-automatic-material-systems-1?variant=43861755625702\"\u003eBambu Lab AMS,\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eyou can use these \u003ca data-mce-fragment=\"1\" rel=\"noopener\" href=\"https:\/\/www.digitmakers.ca\/products\/cardboard-spool-ring-random-colorspool-sleeve-for-filaments-depot-and-d3d-sigma-random-color\" target=\"_blank\" data-mce-href=\"https:\/\/www.digitmakers.ca\/products\/cardboard-spool-ring-random-colorspool-sleeve-for-filaments-depot-and-d3d-sigma-random-color\"\u003eCardboard Spool Ring.\u003c\/a\u003e \u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/LWTMv94_Ves?si=DgiQZTJj1JcGIcSS\" height=\"300\" width=\"500\" allowfullscreen=\"\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e"}

Filaments Depot Gradient PLA 1.75mm 1kg

$24.99 CAD

NON-BRITTLE FORMULA Filaments Depot Gradient PLA is made from quality virgin PLA. Both PLA resin and colorant are food-grade material. Made in Ontario, Canada using sophisticated extrusion equipment and high-tech drying technology, the filaments are monitored with live multi-axis micrometer, and computerized diameter monitoring technology, pro...

Prusament PETG V0 - 1.75 mm 1kg - Natural

$107.99 CAD

{"id":8608313770214,"title":"Prusament PETG V0 - 1.75 mm 1kg - Natural","handle":"prusament-petg-tungsten-75-1-75-mm-1kg-100g-copy","description":"\u003cp\u003e\u003cstrong\u003ePrusament PETG V0 is the one-in-the-world UL-certified self-extinguishing PETG filament. \u003c\/strong\u003eSimilar to the regular Prusament PETG, it is a tough material with good thermal resistance. Its use is universal but it is especially suitable for housings and insulating parts in electronics, due to its \u003cstrong\u003eself-extinguishing properties.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePETG V0 is not prone to warping, so printing large objects isn’t a problem. When our Prusament PETG V0 starts burning, it creates a carbonized crust on the surface that prevents the oxygen from getting in and fueling the flame and eventually extinguishes the fire.\u003c\/p\u003e\n\u003cp\u003ePrusa asked the UL to test the flammability of the Prusament PETG V0. The test method was made according to the IEC 60695-11-10 standard and resulted in a class UL94 V0 (for both our colors). \u003ca rel=\"noopener\" href=\"https:\/\/iq.ul.com\/ul\/cert.aspx?ULID=104636411\" target=\"_blank\"\u003eHere’s the Blue Card that serves as a certificate issued by the UL company.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2 class=\"sc-a598ee94-0 kLCtSp\" mb=\"3\" mt=\"3\" position=\"center\"\u003ePrint preparation\u003c\/h2\u003e\n\u003cp\u003eThis filament needs to be kept\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eas dry as possible as it's more hygroscopic\u003c\/strong\u003e, compared to regular PETG. If you can't keep the filament dry, we suggest drying it before use for 6 hours at 55 °C.\u003c\/p\u003e\n\u003cp\u003ePowder-coated\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSatin or TXT sheet\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eprovides good adhesion.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eClean it with IPA\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available in drugstores, for example) which works great not only with Prusament PETG V0 but with other materials too.\u003c\/p\u003e\n\u003cp\u003ePour a small amount of IPA on a paper towel and use it for cleaning the surface.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eTo achieve the best results, clean the surface while it’s cold.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eKeep in mind that higher temperatures will evaporate the alcohol before cleaning the surface. Also, don’t forget that the heatbed preheated for printing Prusament PETG V0 has a high temperature (80 °C) and may burn you if you touch it!\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAnother possibility is cleaning the surface with warm water and a few drops of dish cleaner\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eon a paper towel. You can also use denatured alcohol.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProsa doesn’t recommend printing with Prusament PETG V0 on a smooth PEI sheet.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis material adheres strongly to the PEI surface and\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003emay cause damage to it.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis type of damage is not covered by the warranty. If you need to print on a smooth surface, spread a thin layer of paper glue stick on it.\u003c\/p\u003e\n\u003ch3 class=\"sc-a598ee94-0 gYWajf\" mb=\"3\" mt=\"3\" position=\"left\"\u003ePrinting Setup\u003c\/h3\u003e\n\u003ctable class=\"spaced-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e230±10°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeatbed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80±10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended print sheet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTextured \/ Satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"sc-a598ee94-0 tLDuP\" mb=\"3\" mt=\"3\" position=\"center\"\u003eTips\u003c\/h3\u003e\n\u003cp\u003eThis filament needs to be kept as dry as possible as it's more hygroscopic, compared to regular PETG. If you can't store the filament in dry conditions, we suggest drying it before use for 6 hours at 55 °C.\u003c\/p\u003e\n\u003ch3 class=\"sc-a598ee94-0 gYWajf\" mb=\"3\" mt=\"3\" position=\"left\"\u003eNotes\u003c\/h3\u003e\n\u003cp\u003ePrusament PETG V0 is made in-house by Prusa Research.\u003cbr\u003eThe UL certification is valid only when all rules set by the UL are followed. \u003cbr\u003eBefore printing, make sure the surface of the print sheet is clean.\u003cbr\u003eTo dry the filament, please follow the instructions in \u003ca rel=\"noopener\" href=\"https:\/\/help.prusa3d.com\/article\/drying-filament_332086?_gl=1*1xl2ptf*_ga*ODgxMTU0MTI5LjE2OTk5OTg5MjA.*_ga_3HK7B7RT5V*MTcxNDA3NjcyNi44MC4xLjE3MTQwNzkwODkuNTkuMC4w\" target=\"_blank\"\u003ePrusa's article.\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"500\" height=\"300\" src=\"https:\/\/www.youtube.com\/embed\/kDCePjoNl5I\" title=\"The new self-extinguishing Prusament PETG V0 (UL-certified!)\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eDATA SHEETS\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch2\u003e\n\u003cspan\u003eCertificate of Compliance\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/cert.png?v=1714080859\" width=\"514\" height=\"353\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/prusament-petg-v0-technical-data-sheet.pdf?v=1714080949\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003ePETG VO TECHNICAL DATA SHEET\u003c\/span\u003e\u003c\/a\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/prusament-petg-v0-safety-data-sheet.pdf?v=1714080948\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003ePETG VO SAFETY DATA SHEET\u003c\/span\u003e\u003c\/a\u003e\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2024-04-25T17:32:28-04:00","created_at":"2024-04-25T17:05:02-04:00","vendor":"Prusa Research","type":"3D Printing Filaments","tags":["1.75mm","Fire","Fire proof","fire resistant","fireproof petg","newfront","newly added","PETG","PETG 1.75mm","PETG filaments","petg fireproof","PETG V0","PETG VO","prusa","prusa filament","prusa petg","prusament","prusament petg"],"price":10799,"price_min":10799,"price_max":10799,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44788413432038,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRUSA-PETG-VO-NTRL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Prusament PETG V0 - 1.75 mm 1kg - Natural","public_title":null,"options":["Default Title"],"price":10799,"weight":1500,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8594173675742","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/files\/e150d5be-8777-44be-a8ab-cc3d76e422a6.jpg?v=1714080667","\/\/www.digitmakers.ca\/cdn\/shop\/files\/040206ed-dc56-4ba6-816d-02934301d66f.jpg?v=1714080672","\/\/www.digitmakers.ca\/cdn\/shop\/files\/c5c9176a-cf02-41fb-a6a7-7ecb1e8ff55a.jpg?v=1714080678"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/e150d5be-8777-44be-a8ab-cc3d76e422a6.jpg?v=1714080667","options":["Title"],"media":[{"alt":null,"id":33684632469734,"position":1,"preview_image":{"aspect_ratio":1.0,"height":716,"width":716,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/e150d5be-8777-44be-a8ab-cc3d76e422a6.jpg?v=1714080667"},"aspect_ratio":1.0,"height":716,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/e150d5be-8777-44be-a8ab-cc3d76e422a6.jpg?v=1714080667","width":716},{"alt":null,"id":33684632633574,"position":2,"preview_image":{"aspect_ratio":1.333,"height":537,"width":716,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/040206ed-dc56-4ba6-816d-02934301d66f.jpg?v=1714080672"},"aspect_ratio":1.333,"height":537,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/040206ed-dc56-4ba6-816d-02934301d66f.jpg?v=1714080672","width":716},{"alt":null,"id":33684632895718,"position":3,"preview_image":{"aspect_ratio":1.333,"height":537,"width":716,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/c5c9176a-cf02-41fb-a6a7-7ecb1e8ff55a.jpg?v=1714080678"},"aspect_ratio":1.333,"height":537,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/c5c9176a-cf02-41fb-a6a7-7ecb1e8ff55a.jpg?v=1714080678","width":716}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003ePrusament PETG V0 is the one-in-the-world UL-certified self-extinguishing PETG filament. \u003c\/strong\u003eSimilar to the regular Prusament PETG, it is a tough material with good thermal resistance. Its use is universal but it is especially suitable for housings and insulating parts in electronics, due to its \u003cstrong\u003eself-extinguishing properties.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePETG V0 is not prone to warping, so printing large objects isn’t a problem. When our Prusament PETG V0 starts burning, it creates a carbonized crust on the surface that prevents the oxygen from getting in and fueling the flame and eventually extinguishes the fire.\u003c\/p\u003e\n\u003cp\u003ePrusa asked the UL to test the flammability of the Prusament PETG V0. The test method was made according to the IEC 60695-11-10 standard and resulted in a class UL94 V0 (for both our colors). \u003ca rel=\"noopener\" href=\"https:\/\/iq.ul.com\/ul\/cert.aspx?ULID=104636411\" target=\"_blank\"\u003eHere’s the Blue Card that serves as a certificate issued by the UL company.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2 class=\"sc-a598ee94-0 kLCtSp\" mb=\"3\" mt=\"3\" position=\"center\"\u003ePrint preparation\u003c\/h2\u003e\n\u003cp\u003eThis filament needs to be kept\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eas dry as possible as it's more hygroscopic\u003c\/strong\u003e, compared to regular PETG. If you can't keep the filament dry, we suggest drying it before use for 6 hours at 55 °C.\u003c\/p\u003e\n\u003cp\u003ePowder-coated\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSatin or TXT sheet\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eprovides good adhesion.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eClean it with IPA\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(available in drugstores, for example) which works great not only with Prusament PETG V0 but with other materials too.\u003c\/p\u003e\n\u003cp\u003ePour a small amount of IPA on a paper towel and use it for cleaning the surface.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eTo achieve the best results, clean the surface while it’s cold.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eKeep in mind that higher temperatures will evaporate the alcohol before cleaning the surface. Also, don’t forget that the heatbed preheated for printing Prusament PETG V0 has a high temperature (80 °C) and may burn you if you touch it!\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAnother possibility is cleaning the surface with warm water and a few drops of dish cleaner\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eon a paper towel. You can also use denatured alcohol.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProsa doesn’t recommend printing with Prusament PETG V0 on a smooth PEI sheet.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis material adheres strongly to the PEI surface and\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003emay cause damage to it.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis type of damage is not covered by the warranty. If you need to print on a smooth surface, spread a thin layer of paper glue stick on it.\u003c\/p\u003e\n\u003ch3 class=\"sc-a598ee94-0 gYWajf\" mb=\"3\" mt=\"3\" position=\"left\"\u003ePrinting Setup\u003c\/h3\u003e\n\u003ctable class=\"spaced-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e230±10°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeatbed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80±10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended print sheet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTextured \/ Satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"sc-a598ee94-0 tLDuP\" mb=\"3\" mt=\"3\" position=\"center\"\u003eTips\u003c\/h3\u003e\n\u003cp\u003eThis filament needs to be kept as dry as possible as it's more hygroscopic, compared to regular PETG. If you can't store the filament in dry conditions, we suggest drying it before use for 6 hours at 55 °C.\u003c\/p\u003e\n\u003ch3 class=\"sc-a598ee94-0 gYWajf\" mb=\"3\" mt=\"3\" position=\"left\"\u003eNotes\u003c\/h3\u003e\n\u003cp\u003ePrusament PETG V0 is made in-house by Prusa Research.\u003cbr\u003eThe UL certification is valid only when all rules set by the UL are followed. \u003cbr\u003eBefore printing, make sure the surface of the print sheet is clean.\u003cbr\u003eTo dry the filament, please follow the instructions in \u003ca rel=\"noopener\" href=\"https:\/\/help.prusa3d.com\/article\/drying-filament_332086?_gl=1*1xl2ptf*_ga*ODgxMTU0MTI5LjE2OTk5OTg5MjA.*_ga_3HK7B7RT5V*MTcxNDA3NjcyNi44MC4xLjE3MTQwNzkwODkuNTkuMC4w\" target=\"_blank\"\u003ePrusa's article.\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"500\" height=\"300\" src=\"https:\/\/www.youtube.com\/embed\/kDCePjoNl5I\" title=\"The new self-extinguishing Prusament PETG V0 (UL-certified!)\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eDATA SHEETS\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch2\u003e\n\u003cspan\u003eCertificate of Compliance\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/cert.png?v=1714080859\" width=\"514\" height=\"353\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/prusament-petg-v0-technical-data-sheet.pdf?v=1714080949\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003ePETG VO TECHNICAL DATA SHEET\u003c\/span\u003e\u003c\/a\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/prusament-petg-v0-safety-data-sheet.pdf?v=1714080948\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003ePETG VO SAFETY DATA SHEET\u003c\/span\u003e\u003c\/a\u003e\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

Prusament PETG V0 - 1.75 mm 1kg - Natural

$107.99 CAD

Prusament PETG V0 is the one-in-the-world UL-certified self-extinguishing PETG filament. Similar to the regular Prusament PETG, it is a tough material with good thermal resistance. Its use is universal but it is especially suitable for housings and insulating parts in electronics, due to its self-extinguishing properties. PETG V0 is not prone to...

eSUN ePLA - SS High Speed Filament 1kg - 1.75mm Various Colours

$21.99 CAD

{"id":8568599970022,"title":"eSUN ePLA - SS High Speed Filament 1kg - 1.75mm Various Colours","handle":"esun-epla-ss-high-speed-filament-1kg-1-75mm-various-colours","description":"\u003ch2 data-mce-fragment=\"1\"\u003eeSUN Fast Printing Speedy PLA Filament\u003c\/h2\u003e\n\u003ch2\u003eFEATURES\u003c\/h2\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eDesigned for High Speed Printer\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUnder same model and printing time, the printing speed of eSUN Fast Printing Speedy PLA are equivalent to 6 times ordinary PLA which print at normal speed.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eHigh Compatibility\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCompatible with Most of FDM 3D Printers and high speed printers, such as: Bambu Lab P1P \/ X1 \/ X1C \/ A1 Mini, AnkerMake M5, Creality K1 \/ K1 Max, Voron 2.4, FLSUN V400, Prusa, UltiMaker, MK3, Ender 3, MakerBot, Flashforge, Raise3D.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eEasy To Print\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNo bubbles, less stringing, high successful printing rate. Low Odor. No warping, low shrinkage, no deformation, no cracking. High printing precision and good molding effect. Made with starch raw materials derived from renewable plant resources. Widely used in cultural creativity, animation industry, film and television props and other fields.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eTangle Free \u0026amp; No Plugging\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFull 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eVacuumed Sealed Packaging\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFilament Net Weight: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg height=\"761\" width=\"506\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/02_8147e92f-e9eb-40cd-aaf2-526bc7c002d7.jpg?v=1713381737\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/02_8147e92f-e9eb-40cd-aaf2-526bc7c002d7.jpg?v=1713381737\"\u003e\u003cimg height=\"580\" width=\"509\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/07_e5a23a31-bf6e-4c3f-919e-b6b41a8c8ae0.jpg?v=1713382671\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/07_e5a23a31-bf6e-4c3f-919e-b6b41a8c8ae0.jpg?v=1713382671\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/03_e4127f4c-f18e-4c49-8df0-6bf48d59394d.jpg?v=1713381783\" width=\"506\" height=\"524\" style=\"font-size: 0.875rem;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/04_2e204c74-7c13-40b8-ac10-ff3273cb3ce1.jpg?v=1713382588\" width=\"505\" height=\"714\" style=\"font-size: 0.875rem;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/05_e0baac38-e08b-4b09-bc68-a6065565f25e.jpg?v=1713382623\" width=\"506\" height=\"881\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg height=\"607\" width=\"506\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/09_56dfa68e-5962-42a9-a301-27ddb2960f2a.jpg?v=1713382886\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/09_56dfa68e-5962-42a9-a301-27ddb2960f2a.jpg?v=1713382886\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","published_at":"2024-04-17T16:41:41-04:00","created_at":"2024-04-17T15:16:27-04:00","vendor":"ESUN","type":"3D Printing Filaments","tags":["1.75mm","1kg","3D Printer Filament","Business","education","esun filament","esun pla plus","Filament","high speed","high speed pla","hobby","HS","New","New Arrival","new-arrivals","newfront","PLA","pla ss","Special PLA 1.75mm"],"price":2199,"price_min":2199,"price_max":2199,"available":true,"price_varies":false,"compare_at_price":0,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44698192675046,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"ESUN-EPLA-SS-1.75-1KG-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":40918938583270,"product_id":8568599970022,"position":2,"created_at":"2024-04-17T16:16:45-04:00","updated_at":"2024-04-17T16:16:48-04:00","alt":null,"width":800,"height":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/4fe40f089696834c4906303a743d01c5.jpg?v=1713385008","variant_ids":[44698192675046]},"available":true,"name":"eSUN ePLA - SS High Speed Filament 1kg - 1.75mm Various Colours - Black","public_title":"Black","options":["Black"],"price":2199,"weight":1500,"compare_at_price":0,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572205628","featured_media":{"alt":null,"id":33566625202406,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/4fe40f089696834c4906303a743d01c5.jpg?v=1713385008"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44698192740582,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"ESUN-EPLA-SS-1.75-1KG-BLUE","requires_shipping":true,"taxable":true,"featured_image":{"id":40918939435238,"product_id":8568599970022,"position":3,"created_at":"2024-04-17T16:17:17-04:00","updated_at":"2024-04-17T16:17:23-04:00","alt":null,"width":800,"height":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/c512696efd74edbc925ec22020bded3c_73d62453-1376-4c9c-bc7a-7d490e59795d.jpg?v=1713385043","variant_ids":[44698192740582]},"available":true,"name":"eSUN ePLA - SS High Speed Filament 1kg - 1.75mm Various Colours - Blue","public_title":"Blue","options":["Blue"],"price":2199,"weight":1500,"compare_at_price":0,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572205673","featured_media":{"alt":null,"id":33566626087142,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/c512696efd74edbc925ec22020bded3c_73d62453-1376-4c9c-bc7a-7d490e59795d.jpg?v=1713385043"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44698192707814,"title":"Cold White","option1":"Cold White","option2":null,"option3":null,"sku":"ESUN-EPLA-SS-1.75-1KG-COLDWHITE","requires_shipping":true,"taxable":true,"featured_image":{"id":40918938714342,"product_id":8568599970022,"position":4,"created_at":"2024-04-17T16:16:51-04:00","updated_at":"2024-04-17T16:17:23-04:00","alt":null,"width":800,"height":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/33ffae0206d3c7cd1aadac09875e5e96.jpg?v=1713385043","variant_ids":[44698192707814]},"available":true,"name":"eSUN ePLA - SS High Speed Filament 1kg - 1.75mm Various Colours - Cold White","public_title":"Cold White","options":["Cold White"],"price":2199,"weight":1500,"compare_at_price":0,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572205642","featured_media":{"alt":null,"id":33566625300710,"position":4,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/33ffae0206d3c7cd1aadac09875e5e96.jpg?v=1713385043"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44698192773350,"title":"Fire Engine Red","option1":"Fire Engine Red","option2":null,"option3":null,"sku":"ESUN-EPLA-SS-1.75-1KG-FRE-ENGNE-RED","requires_shipping":true,"taxable":true,"featured_image":{"id":40918938845414,"product_id":8568599970022,"position":5,"created_at":"2024-04-17T16:16:58-04:00","updated_at":"2024-04-17T16:17:23-04:00","alt":null,"width":800,"height":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/1f4b5c6fd8645241379c2ca6ed1967d3.jpg?v=1713385043","variant_ids":[44698192773350]},"available":true,"name":"eSUN ePLA - SS High Speed Filament 1kg - 1.75mm Various Colours - Fire Engine Red","public_title":"Fire Engine Red","options":["Fire Engine Red"],"price":2199,"weight":1500,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572205697","featured_media":{"alt":null,"id":33566625464550,"position":5,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/1f4b5c6fd8645241379c2ca6ed1967d3.jpg?v=1713385043"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44698192642278,"title":"Silver","option1":"Silver","option2":null,"option3":null,"sku":"ESUN-EPLA-SS-1.75-1KG-SLVR","requires_shipping":true,"taxable":true,"featured_image":{"id":40918939336934,"product_id":8568599970022,"position":6,"created_at":"2024-04-17T16:17:09-04:00","updated_at":"2024-04-17T16:17:23-04:00","alt":null,"width":800,"height":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/94c2558a604b8dbcbafdfbe57abae0e6.jpg?v=1713385043","variant_ids":[44698192642278]},"available":true,"name":"eSUN ePLA - SS High Speed Filament 1kg - 1.75mm Various Colours - Silver","public_title":"Silver","options":["Silver"],"price":2199,"weight":1500,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572205741","featured_media":{"alt":null,"id":33566625956070,"position":6,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/94c2558a604b8dbcbafdfbe57abae0e6.jpg?v=1713385043"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/files\/1_cd56d890-5a86-4f56-9e56-270215f76d2e.jpg?v=1713385001","\/\/www.digitmakers.ca\/cdn\/shop\/files\/4fe40f089696834c4906303a743d01c5.jpg?v=1713385008","\/\/www.digitmakers.ca\/cdn\/shop\/files\/c512696efd74edbc925ec22020bded3c_73d62453-1376-4c9c-bc7a-7d490e59795d.jpg?v=1713385043","\/\/www.digitmakers.ca\/cdn\/shop\/files\/33ffae0206d3c7cd1aadac09875e5e96.jpg?v=1713385043","\/\/www.digitmakers.ca\/cdn\/shop\/files\/1f4b5c6fd8645241379c2ca6ed1967d3.jpg?v=1713385043","\/\/www.digitmakers.ca\/cdn\/shop\/files\/94c2558a604b8dbcbafdfbe57abae0e6.jpg?v=1713385043"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/1_cd56d890-5a86-4f56-9e56-270215f76d2e.jpg?v=1713385001","options":["Color"],"media":[{"alt":null,"id":33566625169638,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/1_cd56d890-5a86-4f56-9e56-270215f76d2e.jpg?v=1713385001"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/1_cd56d890-5a86-4f56-9e56-270215f76d2e.jpg?v=1713385001","width":800},{"alt":null,"id":33566625202406,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/4fe40f089696834c4906303a743d01c5.jpg?v=1713385008"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/4fe40f089696834c4906303a743d01c5.jpg?v=1713385008","width":800},{"alt":null,"id":33566626087142,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/c512696efd74edbc925ec22020bded3c_73d62453-1376-4c9c-bc7a-7d490e59795d.jpg?v=1713385043"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/c512696efd74edbc925ec22020bded3c_73d62453-1376-4c9c-bc7a-7d490e59795d.jpg?v=1713385043","width":800},{"alt":null,"id":33566625300710,"position":4,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/33ffae0206d3c7cd1aadac09875e5e96.jpg?v=1713385043"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/33ffae0206d3c7cd1aadac09875e5e96.jpg?v=1713385043","width":800},{"alt":null,"id":33566625464550,"position":5,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/1f4b5c6fd8645241379c2ca6ed1967d3.jpg?v=1713385043"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/1f4b5c6fd8645241379c2ca6ed1967d3.jpg?v=1713385043","width":800},{"alt":null,"id":33566625956070,"position":6,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/94c2558a604b8dbcbafdfbe57abae0e6.jpg?v=1713385043"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/94c2558a604b8dbcbafdfbe57abae0e6.jpg?v=1713385043","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2 data-mce-fragment=\"1\"\u003eeSUN Fast Printing Speedy PLA Filament\u003c\/h2\u003e\n\u003ch2\u003eFEATURES\u003c\/h2\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eDesigned for High Speed Printer\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUnder same model and printing time, the printing speed of eSUN Fast Printing Speedy PLA are equivalent to 6 times ordinary PLA which print at normal speed.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eHigh Compatibility\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCompatible with Most of FDM 3D Printers and high speed printers, such as: Bambu Lab P1P \/ X1 \/ X1C \/ A1 Mini, AnkerMake M5, Creality K1 \/ K1 Max, Voron 2.4, FLSUN V400, Prusa, UltiMaker, MK3, Ender 3, MakerBot, Flashforge, Raise3D.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eEasy To Print\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNo bubbles, less stringing, high successful printing rate. Low Odor. No warping, low shrinkage, no deformation, no cracking. High printing precision and good molding effect. Made with starch raw materials derived from renewable plant resources. Widely used in cultural creativity, animation industry, film and television props and other fields.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eTangle Free \u0026amp; No Plugging\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFull 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eVacuumed Sealed Packaging\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFilament Net Weight: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg height=\"761\" width=\"506\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/02_8147e92f-e9eb-40cd-aaf2-526bc7c002d7.jpg?v=1713381737\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/02_8147e92f-e9eb-40cd-aaf2-526bc7c002d7.jpg?v=1713381737\"\u003e\u003cimg height=\"580\" width=\"509\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/07_e5a23a31-bf6e-4c3f-919e-b6b41a8c8ae0.jpg?v=1713382671\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/07_e5a23a31-bf6e-4c3f-919e-b6b41a8c8ae0.jpg?v=1713382671\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/03_e4127f4c-f18e-4c49-8df0-6bf48d59394d.jpg?v=1713381783\" width=\"506\" height=\"524\" style=\"font-size: 0.875rem;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/04_2e204c74-7c13-40b8-ac10-ff3273cb3ce1.jpg?v=1713382588\" width=\"505\" height=\"714\" style=\"font-size: 0.875rem;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/05_e0baac38-e08b-4b09-bc68-a6065565f25e.jpg?v=1713382623\" width=\"506\" height=\"881\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg height=\"607\" width=\"506\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/09_56dfa68e-5962-42a9-a301-27ddb2960f2a.jpg?v=1713382886\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/09_56dfa68e-5962-42a9-a301-27ddb2960f2a.jpg?v=1713382886\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e"}

eSUN ePLA - SS High Speed Filament 1kg - 1.75mm Various Colours

$21.99 CAD

eSUN Fast Printing Speedy PLA Filament FEATURES Designed for High Speed Printer Under same model and printing time, the printing speed of eSUN Fast Printing Speedy PLA are equivalent to 6 times ordinary PLA which print at normal speed. High Compatibility Compatible with Most of FDM 3D Printers and high speed printers, such as: Bambu Lab P1P / X1...

Color

E3D High Flow Obxidian™ HotEnd for Bambu Lab X1/P1 Series - Various Sizes

$118.99 CAD

{"id":8542777966822,"title":"E3D High Flow Obxidian™ HotEnd for Bambu Lab X1\/P1 Series - Various Sizes","handle":"e3d-high-flow-obxidian-hotend-for-bambu-lab-x1-p1-series-various-sizes","description":"\u003cdiv data-mce-fragment=\"1\" data-loaded-des=\"true\" data-pf-type=\"ProductDescription\" data-product-id=\"7216818618427\" data-product-type=\"content\" data-less=\"\" data-more=\"\" data-show-button=\"true\"\u003eE3D \u0026amp; Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Lab, bringing you one of the most compact, lightweight and, high performance HotEnds to date.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" data-loaded-des=\"true\" data-pf-type=\"ProductDescription\" data-product-id=\"7216818618427\" data-product-type=\"content\" data-less=\"\" data-more=\"\" data-show-button=\"true\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003ch2 data-mce-fragment=\"1\" data-loaded-des=\"true\" data-pf-type=\"ProductDescription\" data-product-id=\"7216818618427\" data-product-type=\"content\" data-show-button=\"true\"\u003eKey Features\u003c\/h2\u003e\n\u003cdiv data-mce-fragment=\"1\" data-loaded-des=\"true\" data-pf-type=\"ProductDescription\" data-product-id=\"7216818618427\" data-product-type=\"content\" data-less=\"\" data-more=\"\" data-show-button=\"true\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" data-loaded-des=\"true\" class=\"sc-cjrPHo bMtXgY pf-28_\" data-pf-type=\"ProductDescription\" data-product-id=\"7216818618427\" data-product-type=\"content\" data-less=\"\" data-more=\"\" data-show-button=\"true\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHigh Flow.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThere's no denying that the Bambu Lab X1 and P1 series printers are built for speed. However, the motion system, as remarkable as it is, has headroom to be even better. That's where E3D High Flow technology comes in. Using our internal nozzle modification, we've managed to increase the volumetric flow rate of the HotEnd by 60%! That means you can expect more reliable and consistent extrusion at the same speeds \u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eor\u003c\/em\u003e\u003c\/strong\u003e bump up the volumetric flow rate limit in the slicer to utilise the motion systems' capabilities fully.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSmooth and Hard.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe've applied our E3DLC™ coating to the nozzle and heater parts, adding even more abrasive resistance for all your fibre-filled fun and a non-stick protective layer to prevent plastic build-up on the Nozzle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNo compromise.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll of these new additions come in the same form factor as your stock Bambu; simply reuse your temperature sensor and heater pads, and it drops in place with no adjustment to the mount or part cooling required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCompatibility.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe E3D High Flow HotEnd is compatible with the X1, X1 Carbon, P1S, and P1P.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFilament Diameter\u003c\/strong\u003e: 1.75mm\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eWhat's in the box: \u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Bambu Lab High Flow ObXidian HotEnd 0.40 mm\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eor\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e0.60mm\u003c\/li\u003e\n\u003cli\u003e1 x Thermal Grease\u003c\/li\u003e\n\u003cli\u003e1 x Bambu Lab Sock\u003c\/li\u003e\n\u003cli\u003e1 x Bambu Lab Heater Retaining Clip\u003c\/li\u003e\n\u003cli\u003e2 x Bambu Lab Bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAssembly Guide\u003c\/h2\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/e3d-online.com\/pages\/hf-obxidian-bambu-assembly\" data-mce-href=\"https:\/\/e3d-online.com\/pages\/hf-obxidian-bambu-assembly\" target=\"_blank\"\u003eHigh Flow ObXidian™ HotEnd for Bambu Lab Complete Assembly Guide\u003c\/a\u003e","published_at":"2024-04-12T14:30:00-04:00","created_at":"2024-04-12T14:15:16-04:00","vendor":"E3D","type":"Parts","tags":["3D parts","bambu lab hotend","e3D","e3d bambu","e3d hotend","hot temperature hotside","hotside","mechanical","newfront","parts"],"price":11899,"price_min":11899,"price_max":11899,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44627642220774,"title":"0.4 mm","option1":"0.4 mm","option2":null,"option3":null,"sku":"BAMBU-HF-OBX-MO-0400-SPK","requires_shipping":true,"taxable":true,"featured_image":{"id":40856879792358,"product_id":8542777966822,"position":1,"created_at":"2024-04-12T14:25:10-04:00","updated_at":"2024-04-12T14:25:12-04:00","alt":null,"width":600,"height":600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Untitleddesign_1_ecfc3964-c209-48c2-80ef-820b5f3215ab.jpg?v=1712946312","variant_ids":[44627642220774]},"available":true,"name":"E3D High Flow Obxidian™ HotEnd for Bambu Lab X1\/P1 Series - Various Sizes - 0.4 mm","public_title":"0.4 mm","options":["0.4 mm"],"price":11899,"weight":1000,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5061011018267","featured_media":{"alt":null,"id":33490310004966,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Untitleddesign_1_ecfc3964-c209-48c2-80ef-820b5f3215ab.jpg?v=1712946312"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44627642253542,"title":"0.6 mm","option1":"0.6 mm","option2":null,"option3":null,"sku":"BAMBU-HF-OBX-MO-0600-SPK","requires_shipping":true,"taxable":true,"featured_image":{"id":40856880087270,"product_id":8542777966822,"position":2,"created_at":"2024-04-12T14:25:19-04:00","updated_at":"2024-04-12T14:25:22-04:00","alt":null,"width":600,"height":600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Untitleddesign_2.png?v=1712946322","variant_ids":[44627642253542]},"available":true,"name":"E3D High Flow Obxidian™ HotEnd for Bambu Lab X1\/P1 Series - Various Sizes - 0.6 mm","public_title":"0.6 mm","options":["0.6 mm"],"price":11899,"weight":1000,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5061011018274","featured_media":{"alt":null,"id":33490310234342,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Untitleddesign_2.png?v=1712946322"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/files\/Untitleddesign_1_ecfc3964-c209-48c2-80ef-820b5f3215ab.jpg?v=1712946312","\/\/www.digitmakers.ca\/cdn\/shop\/files\/Untitleddesign_2.png?v=1712946322"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Untitleddesign_1_ecfc3964-c209-48c2-80ef-820b5f3215ab.jpg?v=1712946312","options":["Size"],"media":[{"alt":null,"id":33490310004966,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Untitleddesign_1_ecfc3964-c209-48c2-80ef-820b5f3215ab.jpg?v=1712946312"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Untitleddesign_1_ecfc3964-c209-48c2-80ef-820b5f3215ab.jpg?v=1712946312","width":600},{"alt":null,"id":33490310234342,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Untitleddesign_2.png?v=1712946322"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Untitleddesign_2.png?v=1712946322","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv data-mce-fragment=\"1\" data-loaded-des=\"true\" data-pf-type=\"ProductDescription\" data-product-id=\"7216818618427\" data-product-type=\"content\" data-less=\"\" data-more=\"\" data-show-button=\"true\"\u003eE3D \u0026amp; Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Lab, bringing you one of the most compact, lightweight and, high performance HotEnds to date.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" data-loaded-des=\"true\" data-pf-type=\"ProductDescription\" data-product-id=\"7216818618427\" data-product-type=\"content\" data-less=\"\" data-more=\"\" data-show-button=\"true\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003ch2 data-mce-fragment=\"1\" data-loaded-des=\"true\" data-pf-type=\"ProductDescription\" data-product-id=\"7216818618427\" data-product-type=\"content\" data-show-button=\"true\"\u003eKey Features\u003c\/h2\u003e\n\u003cdiv data-mce-fragment=\"1\" data-loaded-des=\"true\" data-pf-type=\"ProductDescription\" data-product-id=\"7216818618427\" data-product-type=\"content\" data-less=\"\" data-more=\"\" data-show-button=\"true\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" data-loaded-des=\"true\" class=\"sc-cjrPHo bMtXgY pf-28_\" data-pf-type=\"ProductDescription\" data-product-id=\"7216818618427\" data-product-type=\"content\" data-less=\"\" data-more=\"\" data-show-button=\"true\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHigh Flow.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThere's no denying that the Bambu Lab X1 and P1 series printers are built for speed. However, the motion system, as remarkable as it is, has headroom to be even better. That's where E3D High Flow technology comes in. Using our internal nozzle modification, we've managed to increase the volumetric flow rate of the HotEnd by 60%! That means you can expect more reliable and consistent extrusion at the same speeds \u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eor\u003c\/em\u003e\u003c\/strong\u003e bump up the volumetric flow rate limit in the slicer to utilise the motion systems' capabilities fully.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSmooth and Hard.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe've applied our E3DLC™ coating to the nozzle and heater parts, adding even more abrasive resistance for all your fibre-filled fun and a non-stick protective layer to prevent plastic build-up on the Nozzle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNo compromise.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll of these new additions come in the same form factor as your stock Bambu; simply reuse your temperature sensor and heater pads, and it drops in place with no adjustment to the mount or part cooling required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCompatibility.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe E3D High Flow HotEnd is compatible with the X1, X1 Carbon, P1S, and P1P.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFilament Diameter\u003c\/strong\u003e: 1.75mm\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eWhat's in the box: \u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Bambu Lab High Flow ObXidian HotEnd 0.40 mm\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eor\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e0.60mm\u003c\/li\u003e\n\u003cli\u003e1 x Thermal Grease\u003c\/li\u003e\n\u003cli\u003e1 x Bambu Lab Sock\u003c\/li\u003e\n\u003cli\u003e1 x Bambu Lab Heater Retaining Clip\u003c\/li\u003e\n\u003cli\u003e2 x Bambu Lab Bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAssembly Guide\u003c\/h2\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/e3d-online.com\/pages\/hf-obxidian-bambu-assembly\" data-mce-href=\"https:\/\/e3d-online.com\/pages\/hf-obxidian-bambu-assembly\" target=\"_blank\"\u003eHigh Flow ObXidian™ HotEnd for Bambu Lab Complete Assembly Guide\u003c\/a\u003e"}

E3D High Flow Obxidian™ HotEnd for Bambu Lab X1/P1 Series - Various Sizes

$118.99 CAD

E3D & Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Lab, bringing you one of the most compact, lightweight and, high performance HotEnds to date. Key Features High Flow. There's no denying that the Bambu Lab X1 and P1 series printers are built for speed. However, the motion system, as remarkable...

Bambu Lab PLA Glow 1.75mm - 1kg (Various Colors)

$38.99 CAD

{"id":8524106039526,"title":"Bambu Lab PLA Glow 1.75mm - 1kg (Various Colors)","handle":"bambu-lab-pla-glow-1-75mm-1kg-various-colors","description":"\u003cdiv class=\"ProductMeta__Text\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch2 class=\"pct_t\"\u003eBambu PLA Glow\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003ePLA Glow stands out due to its incorporation of a unique additive: luminous powder. This variant retains the familiar qualities of traditional PLA, including easy printing, high quality, and exceptional overall mechanical properties. What sets PLA Glow apart is its distinctive feature - it glows in the dark. This makes it the optimal selection for crafting luminous nameplates, logos, jewelry, and various models that require a captivating glow effect.\u003c\/p\u003e\n\u003cb data-mce-fragment=\"1\"\u003eProduct Features\u003c\/b\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUnique Glow in Low Light Conditions\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncludes Basic Reusable Spool\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDiameter: 1.75mm +\/- 0.03mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eCautions for Use\u003c\/b\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAMS Compatible\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAMS lite Not Recommended\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0.2 mm Nozzle Not Compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"swatches swatches-type-products hover-enabled\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\" sa-options-position=\"default\"\u003e\n\u003cdiv id=\"swatch-option1\" class=\"\" data-mce-fragment=\"1\" option-name=\"Color\" option-target=\"option1\"\u003e\n\u003cdiv class=\"swatch-single swatch-preset-516836 swatch-view-stack\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ProductForm__Variants\" data-mce-fragment=\"1\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eUnique Glow in Low Light Conditions\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PLA Glow incorporates a distinct additive: luminous powder, which imparts a special property to printed objects, causing them to emit a captivating glow in the dark.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ProductForm__Variants\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eAccessory Compatibility\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate, High Temperature Plate or Textured PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e0.4, 0.6, 0.8 mm Hardened Steel Nozzle*\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e0.2 mm Nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBambu Liquid Glue\u003cbr\u003eGlue Stick\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eAMS \u0026amp; AMS lite\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eAMS\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eAMS lite*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp class=\"pct_p pct_i-t-text pct_padding-in-mobile\"\u003e*\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cem\u003eA hardened nozzle is required when printing regularly.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"pct_p pct_i-t-text pct_padding-in-mobile\"\u003e*\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cem\u003eIt is not recommended to print Bambu PLA Glow and other glow-in-the-dark PLA filaments with AMS Lite. These filaments, being hard and rough, may cause feeding failures due to substantial feeding resistance.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"pct_p pct_i-t-text pct_padding-in-mobile\"\u003eRecommended Printing Settings\u003c\/h2\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e55 °C，8 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 20% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e190 - 230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e35 - 45 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 250 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ProductForm__QuantitySelector\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"ProductForm__QuantitySelector\" data-mce-fragment=\"1\"\u003ePhysical Properties\u003c\/h2\u003e\n\u003cdiv class=\"ProductForm__QuantitySelector\" data-mce-fragment=\"1\"\u003e\n\u003ctable class=\"pct_tb\" style=\"height: 95px; width: 531px;\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\" style=\"height: 19px;\"\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 310.885px;\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 206.146px;\"\u003e1.26 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" style=\"height: 19px;\"\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 310.885px;\"\u003eVicat Softening Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 206.146px;\"\u003e56 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" style=\"height: 19px;\"\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 310.885px;\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 206.146px;\"\u003e55 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" style=\"height: 19px;\"\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 310.885px;\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 206.146px;\"\u003e155 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" style=\"height: 19px;\"\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 310.885px;\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 206.146px;\"\u003e23.3± 2.4 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eMechanical Properties\u003c\/h2\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e32 ± 3 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e8.6 ± 1.2 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2640 ± 130 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e76 ± 4 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e27.3 ± 2.2 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003e\u003c\/h2\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eDownloads\u003c\/h2\u003e\n\u003cdiv class=\"pct_p pct_i-t-text pct_padding-in-mobile pct_flex-pc\"\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"Bambu PLA Glow TDS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/Bambu_PLA_Glow_Technical_Data_Sheet.pdf?v=1701764565\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament TDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"Bambu PLA Glow MSDS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/MSDS_Bambu_PLA_Glow.pdf?v=1705372913\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament MSDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"Bambu PLA Glow RoHS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/RoHS_report_Bambu_PLA_Glow.pdf?v=1705372913\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament RoHS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 class=\"pct_t pct_st\"\u003ePrinting Tips\u003c\/h4\u003e\n\u003cp class=\"pct_p\"\u003e• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to:\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca rel=\"noopener\" href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/filament\/dry-filament\" title=\"Filament drying cover\" target=\"_blank\"\u003eFilament drying instructions\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• Printing with a 0.2 mm nozzle is not recommended; instead, it is advised to use a 0.4 mm nozzle for optimal results.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• The model's luminous intensity diminishes over time, but exposure to ultraviolet or sunlight for a brief period (approximately 2 hours) can rejuvenate its glow. However, prolonged or frequent irradiation may expedite PLA aging.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• Not suitable for AMS lite: Utilizing AMS lite may result in high feed resistance and an increased risk of feed failure. Consider alternative methods such as pre-use drying for better outcomes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2024-04-08T17:42:46-04:00","created_at":"2024-04-08T17:28:43-04:00","vendor":"Bambu Lab","type":"3D Printing Filaments","tags":["1.75mm","3D Filament","3D Printer Filament","Bambu Lab","Bambu Lab Collection","Bambu Lab Filaments","Filament","glow in the dark","newfront","night glow filament","PLA Filament","pla glow","Special PLA 1.75mm","Standard PLA 1.75mm"],"price":3899,"price_min":3899,"price_max":3899,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44587653824742,"title":"Glow Orange","option1":"Glow Orange","option2":null,"option3":null,"sku":"A12-A0-1.75-1000-SPL","requires_shipping":true,"taxable":true,"featured_image":{"id":40809964470502,"product_id":8524106039526,"position":1,"created_at":"2024-04-08T17:35:17-04:00","updated_at":"2024-04-08T17:39:44-04:00","alt":null,"width":700,"height":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/e40cbbf6e7fed96557d8e2be99e4b9cf_700x_d485a406-c411-4ad8-a1a8-70bc050593e6.png?v=1712612384","variant_ids":[44587653824742]},"available":true,"name":"Bambu Lab PLA Glow 1.75mm - 1kg (Various Colors) - Glow Orange","public_title":"Glow Orange","options":["Glow Orange"],"price":3899,"weight":1400,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"921133017019","featured_media":{"alt":null,"id":33440230834406,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/e40cbbf6e7fed96557d8e2be99e4b9cf_700x_d485a406-c411-4ad8-a1a8-70bc050593e6.png?v=1712612384"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44587653857510,"title":"Glow Pink","option1":"Glow Pink","option2":null,"option3":null,"sku":"A12-R0-1.75-1000-SPL","requires_shipping":true,"taxable":true,"featured_image":{"id":40809963028710,"product_id":8524106039526,"position":2,"created_at":"2024-04-08T17:35:11-04:00","updated_at":"2024-04-08T17:39:44-04:00","alt":null,"width":700,"height":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/5d4ad98b7e6fd7642323ef49163d8697_700x_dc60d6fc-abe7-4b47-8e54-a3907abd0a20.png?v=1712612384","variant_ids":[44587653857510]},"available":true,"name":"Bambu Lab PLA Glow 1.75mm - 1kg (Various Colors) - Glow Pink","public_title":"Glow Pink","options":["Glow Pink"],"price":3899,"weight":1400,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"921133017022","featured_media":{"alt":null,"id":33440229720294,"position":2,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/5d4ad98b7e6fd7642323ef49163d8697_700x_dc60d6fc-abe7-4b47-8e54-a3907abd0a20.png?v=1712612384"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44587653890278,"title":"Glow Yellow","option1":"Glow Yellow","option2":null,"option3":null,"sku":"A12-Y0-1.75-1000-SPL","requires_shipping":true,"taxable":true,"featured_image":{"id":40809965060326,"product_id":8524106039526,"position":3,"created_at":"2024-04-08T17:35:24-04:00","updated_at":"2024-04-08T17:35:26-04:00","alt":null,"width":700,"height":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/6fdaecdc33b9371fb7c326d4bd52932b_700x_7a494bd5-ba77-4e44-8da2-e9bd5e3d78e0.png?v=1712612126","variant_ids":[44587653890278]},"available":true,"name":"Bambu Lab PLA Glow 1.75mm - 1kg (Various Colors) - Glow Yellow","public_title":"Glow Yellow","options":["Glow Yellow"],"price":3899,"weight":1400,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"921133017023","featured_media":{"alt":null,"id":33440231719142,"position":3,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/6fdaecdc33b9371fb7c326d4bd52932b_700x_7a494bd5-ba77-4e44-8da2-e9bd5e3d78e0.png?v=1712612126"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/files\/e40cbbf6e7fed96557d8e2be99e4b9cf_700x_d485a406-c411-4ad8-a1a8-70bc050593e6.png?v=1712612384","\/\/www.digitmakers.ca\/cdn\/shop\/files\/5d4ad98b7e6fd7642323ef49163d8697_700x_dc60d6fc-abe7-4b47-8e54-a3907abd0a20.png?v=1712612384","\/\/www.digitmakers.ca\/cdn\/shop\/files\/6fdaecdc33b9371fb7c326d4bd52932b_700x_7a494bd5-ba77-4e44-8da2-e9bd5e3d78e0.png?v=1712612126"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/e40cbbf6e7fed96557d8e2be99e4b9cf_700x_d485a406-c411-4ad8-a1a8-70bc050593e6.png?v=1712612384","options":["Color"],"media":[{"alt":null,"id":33440230834406,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/e40cbbf6e7fed96557d8e2be99e4b9cf_700x_d485a406-c411-4ad8-a1a8-70bc050593e6.png?v=1712612384"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/e40cbbf6e7fed96557d8e2be99e4b9cf_700x_d485a406-c411-4ad8-a1a8-70bc050593e6.png?v=1712612384","width":700},{"alt":null,"id":33440229720294,"position":2,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/5d4ad98b7e6fd7642323ef49163d8697_700x_dc60d6fc-abe7-4b47-8e54-a3907abd0a20.png?v=1712612384"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/5d4ad98b7e6fd7642323ef49163d8697_700x_dc60d6fc-abe7-4b47-8e54-a3907abd0a20.png?v=1712612384","width":700},{"alt":null,"id":33440231719142,"position":3,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/6fdaecdc33b9371fb7c326d4bd52932b_700x_7a494bd5-ba77-4e44-8da2-e9bd5e3d78e0.png?v=1712612126"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/6fdaecdc33b9371fb7c326d4bd52932b_700x_7a494bd5-ba77-4e44-8da2-e9bd5e3d78e0.png?v=1712612126","width":700}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"ProductMeta__Text\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch2 class=\"pct_t\"\u003eBambu PLA Glow\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003ePLA Glow stands out due to its incorporation of a unique additive: luminous powder. This variant retains the familiar qualities of traditional PLA, including easy printing, high quality, and exceptional overall mechanical properties. What sets PLA Glow apart is its distinctive feature - it glows in the dark. This makes it the optimal selection for crafting luminous nameplates, logos, jewelry, and various models that require a captivating glow effect.\u003c\/p\u003e\n\u003cb data-mce-fragment=\"1\"\u003eProduct Features\u003c\/b\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUnique Glow in Low Light Conditions\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncludes Basic Reusable Spool\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDiameter: 1.75mm +\/- 0.03mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eCautions for Use\u003c\/b\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAMS Compatible\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAMS lite Not Recommended\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0.2 mm Nozzle Not Compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"swatches swatches-type-products hover-enabled\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\" sa-options-position=\"default\"\u003e\n\u003cdiv id=\"swatch-option1\" class=\"\" data-mce-fragment=\"1\" option-name=\"Color\" option-target=\"option1\"\u003e\n\u003cdiv class=\"swatch-single swatch-preset-516836 swatch-view-stack\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ProductForm__Variants\" data-mce-fragment=\"1\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eUnique Glow in Low Light Conditions\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PLA Glow incorporates a distinct additive: luminous powder, which imparts a special property to printed objects, causing them to emit a captivating glow in the dark.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ProductForm__Variants\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eAccessory Compatibility\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate, High Temperature Plate or Textured PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e0.4, 0.6, 0.8 mm Hardened Steel Nozzle*\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e0.2 mm Nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBambu Liquid Glue\u003cbr\u003eGlue Stick\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eAMS \u0026amp; AMS lite\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eAMS\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eAMS lite*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp class=\"pct_p pct_i-t-text pct_padding-in-mobile\"\u003e*\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cem\u003eA hardened nozzle is required when printing regularly.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"pct_p pct_i-t-text pct_padding-in-mobile\"\u003e*\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cem\u003eIt is not recommended to print Bambu PLA Glow and other glow-in-the-dark PLA filaments with AMS Lite. These filaments, being hard and rough, may cause feeding failures due to substantial feeding resistance.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"pct_p pct_i-t-text pct_padding-in-mobile\"\u003eRecommended Printing Settings\u003c\/h2\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e55 °C，8 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 20% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e190 - 230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e35 - 45 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 250 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ProductForm__QuantitySelector\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"ProductForm__QuantitySelector\" data-mce-fragment=\"1\"\u003ePhysical Properties\u003c\/h2\u003e\n\u003cdiv class=\"ProductForm__QuantitySelector\" data-mce-fragment=\"1\"\u003e\n\u003ctable class=\"pct_tb\" style=\"height: 95px; width: 531px;\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\" style=\"height: 19px;\"\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 310.885px;\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 206.146px;\"\u003e1.26 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" style=\"height: 19px;\"\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 310.885px;\"\u003eVicat Softening Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 206.146px;\"\u003e56 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" style=\"height: 19px;\"\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 310.885px;\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 206.146px;\"\u003e55 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" style=\"height: 19px;\"\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 310.885px;\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 206.146px;\"\u003e155 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" style=\"height: 19px;\"\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 310.885px;\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"pct_td\" style=\"height: 19px; width: 206.146px;\"\u003e23.3± 2.4 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eMechanical Properties\u003c\/h2\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e32 ± 3 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e8.6 ± 1.2 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2640 ± 130 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e76 ± 4 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e27.3 ± 2.2 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003e\u003c\/h2\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eDownloads\u003c\/h2\u003e\n\u003cdiv class=\"pct_p pct_i-t-text pct_padding-in-mobile pct_flex-pc\"\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"Bambu PLA Glow TDS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/Bambu_PLA_Glow_Technical_Data_Sheet.pdf?v=1701764565\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament TDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"Bambu PLA Glow MSDS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/MSDS_Bambu_PLA_Glow.pdf?v=1705372913\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament MSDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"Bambu PLA Glow RoHS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/RoHS_report_Bambu_PLA_Glow.pdf?v=1705372913\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament RoHS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 class=\"pct_t pct_st\"\u003ePrinting Tips\u003c\/h4\u003e\n\u003cp class=\"pct_p\"\u003e• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to:\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca rel=\"noopener\" href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/filament\/dry-filament\" title=\"Filament drying cover\" target=\"_blank\"\u003eFilament drying instructions\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• Printing with a 0.2 mm nozzle is not recommended; instead, it is advised to use a 0.4 mm nozzle for optimal results.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• The model's luminous intensity diminishes over time, but exposure to ultraviolet or sunlight for a brief period (approximately 2 hours) can rejuvenate its glow. However, prolonged or frequent irradiation may expedite PLA aging.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• Not suitable for AMS lite: Utilizing AMS lite may result in high feed resistance and an increased risk of feed failure. Consider alternative methods such as pre-use drying for better outcomes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Bambu Lab PLA Glow 1.75mm - 1kg (Various Colors)

$38.99 CAD

Bambu PLA Glow PLA Glow stands out due to its incorporation of a unique additive: luminous powder. This variant retains the familiar qualities of traditional PLA, including easy printing, high quality, and exceptional overall mechanical properties. What sets PLA Glow apart is its distinctive feature - it glows in the dark. This makes it the op...

Bambu Lab PA6-GF 1.75mm - 1kg

$76.99 CAD

{"id":8524090802406,"title":"Bambu Lab PA6-GF 1.75mm - 1kg","handle":"bambu-lab-pa6-gf-1-75mm-1kg","description":"\u003ch2 data-mce-fragment=\"1\" class=\"ProductMeta__prodectdesctext Heading u-h6\"\u003eGlass Fiber Reinforced PA6 (Nylon 6)\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eProduct Features\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt to Last\u003c\/li\u003e\n\u003cli\u003eDimensional Stability\u003c\/li\u003e\n\u003cli\u003eExceptional Thermal Properties\u003c\/li\u003e\n\u003cli\u003eChemical Resistance\u003c\/li\u003e\n\u003cli\u003eSmooth Surface and More Colors\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm +\/- 0.03mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eCautions for Use\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.2 mm Nozzle Not Compatible\u003c\/li\u003e\n\u003cli\u003eStainless Steel Nozzle Not Recommended\u003c\/li\u003e\n\u003cli\u003eAMS \u0026amp; AMS lite Compatible\u003c\/li\u003e\n\u003cli\u003eDry before Use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"pct_t\"\u003eBambu PA6-GF - Glass Fiber Reinforced Nylon\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PA6-GF, also known as Nylon 6 with Glass Fiber, stands at the forefront of high-performance engineering plastics. Engineered to deliver exceptional strength, durability, dimensional stability. The PA6-GF is also more cost effective when compared to other top tier engineering filaments. \u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eBuilt to Last\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PA6-GF is exceptionally strong and durable due to reinforced glass fibers, making it the perfect choice for prints that need to withstand heavy use and resist bending or breaking.\u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eDimensional Stability\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003ePA6-GF boasts unparalleled dimensional stability thanks to its glass fiber reinforcement, minimizing warping in comparison to standard PA filaments. Print with precise dimensions, even in the most intricate geometries.\u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eExceptional Thermal Properties\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003ePA6-GF boasts a high heat deflection temperature and superior dimensional stability, enabling it to retain its mechanical properties even under elevated temperatures. This makes it ideal for demanding industrial and automotive applications.\u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eChemical Resistance\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003ePA6-GF offers excellent resistance to chemicals, oils, and many kinds of solvents, ensuring long-term performance in challenging environments. \u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eAccessory Compatibility\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate, High Temperature Plate or Textured PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel 0.4mm \/ 0.6mm (recommended) \/ 0.8 mm\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHotend with Stainless Steel Nozzle (all size)\u003cbr\u003eHotend with Hardened Steel Nozzle (0.2 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBambu Glue Stick\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBambu Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eAMS \u0026amp; AMS lite\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eAMS \u0026amp; AMS lite\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eRecommended Printing Settings\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDrying Settings before Printing\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e80 °C, 8 - 12 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 20% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e260 - 290 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e80 - 100 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 130 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePhysical Properties\u003c\/h2\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e1.09 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eVicat Softening Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e212 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e186 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e223 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e6.8 ± 0.6 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eMechanical Properties\u003c\/h2\u003e\n\u003ctable style=\"width: 541px;\" class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd style=\"width: 317.743px;\" class=\"pct_td\" data-mce-style=\"width: 317.743px;\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd style=\"width: 209.288px;\" class=\"pct_td\" data-mce-style=\"width: 209.288px;\"\u003e102 ± 7 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd style=\"width: 317.743px;\" class=\"pct_td\" data-mce-style=\"width: 317.743px;\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd style=\"width: 209.288px;\" class=\"pct_td\" data-mce-style=\"width: 209.288px;\"\u003e5.8 ± 1.6 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd style=\"width: 317.743px;\" class=\"pct_td\" data-mce-style=\"width: 317.743px;\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd style=\"width: 209.288px;\" class=\"pct_td\" data-mce-style=\"width: 209.288px;\"\u003e5460 ± 280 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd style=\"width: 317.743px;\" class=\"pct_td\" data-mce-style=\"width: 317.743px;\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd style=\"width: 209.288px;\" class=\"pct_td\" data-mce-style=\"width: 209.288px;\"\u003e151 ± 8 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd style=\"width: 317.743px;\" class=\"pct_td\" data-mce-style=\"width: 317.743px;\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd style=\"width: 209.288px;\" class=\"pct_td\" data-mce-style=\"width: 209.288px;\"\u003e40.3 ± 2.5 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eDownloads\u003c\/h2\u003e\n\u003cdiv class=\"pct_p pct_i-t-text pct_padding-in-mobile pct_flex-pc\"\u003e\n\u003cp\u003e\u003ca title=\"Bambu pa6-gf TDS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0574\/3116\/2995\/files\/Bambu_PA6-GF_Technical_Data_Sheet.pdf?v=1710923932\" rel=\"noopener\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0574\/3116\/2995\/files\/Bambu_PA6-GF_Technical_Data_Sheet.pdf?v=1710923932\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament TDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Bambu pa6-gf MSDS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0574\/3116\/2995\/files\/MSDS_Bambu_PA6-GF.pdf?v=1710923934\" rel=\"noopener\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0574\/3116\/2995\/files\/MSDS_Bambu_PA6-GF.pdf?v=1710923934\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament MSDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Bambu pa6-gf RoHS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0574\/3116\/2995\/files\/RoHS_report_Bambu_PA6-GF.pdf?v=1710923934\" rel=\"noopener\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0574\/3116\/2995\/files\/RoHS_report_Bambu_PA6-GF.pdf?v=1710923934\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament RoHS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch4 class=\"pct_t pct_st\"\u003ePrinting Tips\u003c\/h4\u003e\n\u003cp class=\"pct_p\"\u003e• Bambu PA6-GF needs proper drying before printing: recommended drying temperature is 80 ℃ for 8 to 12 hours in a blast drying oven, or 90 to 100 ℃ for 10 to 12 hours on heat bed. (Do not exceed 100 ℃ because the spool may deform or even melt). For more details, please refer to:\u003cspan\u003e\u003ca title=\"Printing tips for Engineering materials\" href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/pa-cf-printing-tips\" rel=\"noopener\" data-mce-href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/pa-cf-printing-tips\" target=\"_blank\"\u003e Printing tips for Engineering materials\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• To prevent the filament from absorbing moisture, it is recommended to use an airtight storage container with desiccant during printing. For more details, please refer to:\u003cspan\u003e\u003ca title=\"Printing tips for Engineering materials\" href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/pa-cf-printing-tips\" rel=\"noopener\" data-mce-href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/pa-cf-printing-tips\" target=\"_blank\"\u003e Printing tips for Engineering materials\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• To minimize warping, avoid printing large-sized high infill density models. Use enclosed printers and ensure the build plate is properly applied with glue for better print adhesion before printing.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• For better print results and more details, please refer to:\u003cspan\u003e\u003ca title=\"Printing tips for Engineering materials\" href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/pa-cf-printing-tips\" rel=\"noopener\" data-mce-href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/pa-cf-printing-tips\" target=\"_blank\"\u003e Printing tips for Engineering materials\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003ePost-processing Tips\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003e• We recommend removing the support structures within 2 hours after printing to prevent them from sticking after absorbing moisture. If sticking occurs, dry the model to ease the removal.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• Placing the printed part in a convection oven set between 80 to 130 degrees Celsius for 5 to 12 hours can further enhance the strength and rigidity of the print. Note: The effectiveness of this process depends on the structure, size, and conditions of the printed model. Some models may warp or deform after annealing. For more details, please refer to:\u003cspan\u003e\u003ca title=\"Work after Printing Finished\" href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/acc\/print-finish-adv\" rel=\"noopener\" data-mce-href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/acc\/print-finish-adv\" target=\"_blank\"\u003e Work after Printing Finished\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2024-04-08T17:12:24-04:00","created_at":"2024-04-08T16:59:52-04:00","vendor":"Bambu Lab","type":"3D Printing Filaments","tags":["1.75mm","3D Filament","3D Printer Filament","Bambu Lab","Bambu Lab Collection","Bambu Lab Filaments","Filament","glass composite 1.75mm","glass fiber","glass fiber alloy nylon","New Arrival","newfront","Nylon","Nylon 1.75 mm","Nylon 1.75mm","nylon glass fiber"],"price":7699,"price_min":7699,"price_max":7699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44587567677670,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"N08-K0-1.75-1000-SPL","requires_shipping":true,"taxable":true,"featured_image":{"id":40809894281446,"product_id":8524090802406,"position":2,"created_at":"2024-04-08T17:06:04-04:00","updated_at":"2024-04-08T17:06:05-04:00","alt":null,"width":700,"height":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/JP35970c_700x_289beff7-29d3-4dbb-9bde-046a7230d267.jpg?v=1712610365","variant_ids":[44587567677670]},"available":true,"name":"Bambu Lab PA6-GF 1.75mm - 1kg - Black","public_title":"Black","options":["Black"],"price":7699,"weight":1400,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"921170599770","featured_media":{"alt":null,"id":33440155435238,"position":2,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/JP35970c_700x_289beff7-29d3-4dbb-9bde-046a7230d267.jpg?v=1712610365"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44587567710438,"title":"White","option1":"White","option2":null,"option3":null,"sku":"N08-D0-1.75-1000-SPL","requires_shipping":true,"taxable":true,"featured_image":{"id":40809894215910,"product_id":8524090802406,"position":1,"created_at":"2024-04-08T17:05:59-04:00","updated_at":"2024-04-08T17:06:02-04:00","alt":null,"width":700,"height":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/JP35967_700x_4901c396-f6ee-4cf8-a0fa-8a55a8225291.jpg?v=1712610362","variant_ids":[44587567710438]},"available":true,"name":"Bambu Lab PA6-GF 1.75mm - 1kg - White","public_title":"White","options":["White"],"price":7699,"weight":1000,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"921170599771","featured_media":{"alt":null,"id":33440155402470,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/JP35967_700x_4901c396-f6ee-4cf8-a0fa-8a55a8225291.jpg?v=1712610362"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/files\/JP35967_700x_4901c396-f6ee-4cf8-a0fa-8a55a8225291.jpg?v=1712610362","\/\/www.digitmakers.ca\/cdn\/shop\/files\/JP35970c_700x_289beff7-29d3-4dbb-9bde-046a7230d267.jpg?v=1712610365"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/JP35967_700x_4901c396-f6ee-4cf8-a0fa-8a55a8225291.jpg?v=1712610362","options":["Size"],"media":[{"alt":null,"id":33440155402470,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/JP35967_700x_4901c396-f6ee-4cf8-a0fa-8a55a8225291.jpg?v=1712610362"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/JP35967_700x_4901c396-f6ee-4cf8-a0fa-8a55a8225291.jpg?v=1712610362","width":700},{"alt":null,"id":33440155435238,"position":2,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/JP35970c_700x_289beff7-29d3-4dbb-9bde-046a7230d267.jpg?v=1712610365"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/JP35970c_700x_289beff7-29d3-4dbb-9bde-046a7230d267.jpg?v=1712610365","width":700}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2 data-mce-fragment=\"1\" class=\"ProductMeta__prodectdesctext Heading u-h6\"\u003eGlass Fiber Reinforced PA6 (Nylon 6)\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eProduct Features\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt to Last\u003c\/li\u003e\n\u003cli\u003eDimensional Stability\u003c\/li\u003e\n\u003cli\u003eExceptional Thermal Properties\u003c\/li\u003e\n\u003cli\u003eChemical Resistance\u003c\/li\u003e\n\u003cli\u003eSmooth Surface and More Colors\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm +\/- 0.03mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eCautions for Use\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.2 mm Nozzle Not Compatible\u003c\/li\u003e\n\u003cli\u003eStainless Steel Nozzle Not Recommended\u003c\/li\u003e\n\u003cli\u003eAMS \u0026amp; AMS lite Compatible\u003c\/li\u003e\n\u003cli\u003eDry before Use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"pct_t\"\u003eBambu PA6-GF - Glass Fiber Reinforced Nylon\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PA6-GF, also known as Nylon 6 with Glass Fiber, stands at the forefront of high-performance engineering plastics. Engineered to deliver exceptional strength, durability, dimensional stability. The PA6-GF is also more cost effective when compared to other top tier engineering filaments. \u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eBuilt to Last\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PA6-GF is exceptionally strong and durable due to reinforced glass fibers, making it the perfect choice for prints that need to withstand heavy use and resist bending or breaking.\u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eDimensional Stability\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003ePA6-GF boasts unparalleled dimensional stability thanks to its glass fiber reinforcement, minimizing warping in comparison to standard PA filaments. Print with precise dimensions, even in the most intricate geometries.\u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eExceptional Thermal Properties\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003ePA6-GF boasts a high heat deflection temperature and superior dimensional stability, enabling it to retain its mechanical properties even under elevated temperatures. This makes it ideal for demanding industrial and automotive applications.\u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eChemical Resistance\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003ePA6-GF offers excellent resistance to chemicals, oils, and many kinds of solvents, ensuring long-term performance in challenging environments. \u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eAccessory Compatibility\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate, High Temperature Plate or Textured PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel 0.4mm \/ 0.6mm (recommended) \/ 0.8 mm\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHotend with Stainless Steel Nozzle (all size)\u003cbr\u003eHotend with Hardened Steel Nozzle (0.2 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBambu Glue Stick\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBambu Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eAMS \u0026amp; AMS lite\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eAMS \u0026amp; AMS lite\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eRecommended Printing Settings\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDrying Settings before Printing\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e80 °C, 8 - 12 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 20% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e260 - 290 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e80 - 100 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 130 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePhysical Properties\u003c\/h2\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e1.09 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eVicat Softening Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e212 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e186 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e223 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e6.8 ± 0.6 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eMechanical Properties\u003c\/h2\u003e\n\u003ctable style=\"width: 541px;\" class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd style=\"width: 317.743px;\" class=\"pct_td\" data-mce-style=\"width: 317.743px;\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd style=\"width: 209.288px;\" class=\"pct_td\" data-mce-style=\"width: 209.288px;\"\u003e102 ± 7 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd style=\"width: 317.743px;\" class=\"pct_td\" data-mce-style=\"width: 317.743px;\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd style=\"width: 209.288px;\" class=\"pct_td\" data-mce-style=\"width: 209.288px;\"\u003e5.8 ± 1.6 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd style=\"width: 317.743px;\" class=\"pct_td\" data-mce-style=\"width: 317.743px;\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd style=\"width: 209.288px;\" class=\"pct_td\" data-mce-style=\"width: 209.288px;\"\u003e5460 ± 280 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd style=\"width: 317.743px;\" class=\"pct_td\" data-mce-style=\"width: 317.743px;\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd style=\"width: 209.288px;\" class=\"pct_td\" data-mce-style=\"width: 209.288px;\"\u003e151 ± 8 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd style=\"width: 317.743px;\" class=\"pct_td\" data-mce-style=\"width: 317.743px;\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd style=\"width: 209.288px;\" class=\"pct_td\" data-mce-style=\"width: 209.288px;\"\u003e40.3 ± 2.5 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eDownloads\u003c\/h2\u003e\n\u003cdiv class=\"pct_p pct_i-t-text pct_padding-in-mobile pct_flex-pc\"\u003e\n\u003cp\u003e\u003ca title=\"Bambu pa6-gf TDS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0574\/3116\/2995\/files\/Bambu_PA6-GF_Technical_Data_Sheet.pdf?v=1710923932\" rel=\"noopener\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0574\/3116\/2995\/files\/Bambu_PA6-GF_Technical_Data_Sheet.pdf?v=1710923932\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament TDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Bambu pa6-gf MSDS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0574\/3116\/2995\/files\/MSDS_Bambu_PA6-GF.pdf?v=1710923934\" rel=\"noopener\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0574\/3116\/2995\/files\/MSDS_Bambu_PA6-GF.pdf?v=1710923934\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament MSDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Bambu pa6-gf RoHS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0574\/3116\/2995\/files\/RoHS_report_Bambu_PA6-GF.pdf?v=1710923934\" rel=\"noopener\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0574\/3116\/2995\/files\/RoHS_report_Bambu_PA6-GF.pdf?v=1710923934\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament RoHS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch4 class=\"pct_t pct_st\"\u003ePrinting Tips\u003c\/h4\u003e\n\u003cp class=\"pct_p\"\u003e• Bambu PA6-GF needs proper drying before printing: recommended drying temperature is 80 ℃ for 8 to 12 hours in a blast drying oven, or 90 to 100 ℃ for 10 to 12 hours on heat bed. (Do not exceed 100 ℃ because the spool may deform or even melt). For more details, please refer to:\u003cspan\u003e\u003ca title=\"Printing tips for Engineering materials\" href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/pa-cf-printing-tips\" rel=\"noopener\" data-mce-href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/pa-cf-printing-tips\" target=\"_blank\"\u003e Printing tips for Engineering materials\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• To prevent the filament from absorbing moisture, it is recommended to use an airtight storage container with desiccant during printing. For more details, please refer to:\u003cspan\u003e\u003ca title=\"Printing tips for Engineering materials\" href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/pa-cf-printing-tips\" rel=\"noopener\" data-mce-href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/pa-cf-printing-tips\" target=\"_blank\"\u003e Printing tips for Engineering materials\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• To minimize warping, avoid printing large-sized high infill density models. Use enclosed printers and ensure the build plate is properly applied with glue for better print adhesion before printing.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• For better print results and more details, please refer to:\u003cspan\u003e\u003ca title=\"Printing tips for Engineering materials\" href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/pa-cf-printing-tips\" rel=\"noopener\" data-mce-href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/pa-cf-printing-tips\" target=\"_blank\"\u003e Printing tips for Engineering materials\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003ePost-processing Tips\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003e• We recommend removing the support structures within 2 hours after printing to prevent them from sticking after absorbing moisture. If sticking occurs, dry the model to ease the removal.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• Placing the printed part in a convection oven set between 80 to 130 degrees Celsius for 5 to 12 hours can further enhance the strength and rigidity of the print. Note: The effectiveness of this process depends on the structure, size, and conditions of the printed model. Some models may warp or deform after annealing. For more details, please refer to:\u003cspan\u003e\u003ca title=\"Work after Printing Finished\" href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/acc\/print-finish-adv\" rel=\"noopener\" data-mce-href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/acc\/print-finish-adv\" target=\"_blank\"\u003e Work after Printing Finished\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Bambu Lab PA6-GF 1.75mm - 1kg

$76.99 CAD

Glass Fiber Reinforced PA6 (Nylon 6) Product Features Built to Last Dimensional Stability Exceptional Thermal Properties Chemical Resistance Smooth Surface and More Colors Diameter: 1.75mm +/- 0.03mm Cautions for Use 0.2 mm Nozzle Not Compatible Stainless Steel Nozzle Not Recommended AMS & AMS lite Compatible Dry before Use Bambu PA6-GF ...

Bambu Lab PA6-CF Black 1.75mm - 500g/1kg

From $43.99 CAD

{"id":8523944558822,"title":"Bambu Lab PA6-CF Black 1.75mm - 500g\/1kg","handle":"bambu-lab-pa6-cf-1-75mm-500g-1kg","description":"\u003ch2 class=\"ProductMeta__prodectdesctext Heading u-h6\" data-mce-fragment=\"1\"\u003eCarbon Fiber Reinforced PA6 (Nylon 6)\u003c\/h2\u003e\n\u003ch2 class=\"pct_p\"\u003e\u003cb\u003eProduct Features\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Strength and Stiffness\u003c\/li\u003e\n\u003cli\u003eToughness \u0026amp; Vibration Resistance\u003c\/li\u003e\n\u003cli\u003eExceptional Thermal Resistance\u003c\/li\u003e\n\u003cli\u003eComes with High Temperature Reusable Spool\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm +\/- 0.03mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n\u003cb\u003eCautions for Use\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e0.2 mm Nozzle Not Compatible\u003c\/li\u003e\n\u003cli\u003eStainless Steel Nozzle Not Recommended\u003c\/li\u003e\n\u003cli\u003eDry before Use for the Highest Print Quality\u003c\/li\u003e\n\u003cli\u003eAMS NOT Compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBambu PA6-CF is a carbon fiber reinforced PA6 (Nylon 6) filament. The carbon fiber reinforcement provides significantly high stiffness and strength properties in dry environments and maintains exceptional heat resistance and impact resistance. Similar to other Bambu CF Filaments, these outstanding mechanical properties make it an ideal choice for printing fixtures, clamps, automotive and mechanical components and various structural and engineering parts that used in dry environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg height=\"192\" width=\"551\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Banner-pa6-cf-pc.png?v=1712601077\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Banner-pa6-cf-pc.png?v=1712601077\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eNormal PA-CF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePA6-CF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eImproved %\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eStrength (Bending Strength - XY, dry state)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e128 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e151 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003e\u003cspan\u003e18%\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eStiffness (Bending Modulus - XY, dry state)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e4420 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e5460 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003e\u003cspan\u003e24%\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eImpact \u0026amp; Vibration Resistance\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PA6-CF offers excellent impact resistance, ensuring effective vibration resistance for your prints. It is commonly used to print models that need to withstand impact, collision, and vibration.\u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eExceptional Thermal Resistance\u003c\/h2\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003eFilament\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePLA Basic\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePETG Basic\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eABS\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eASA\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePC\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cspan\u003ePA6-CF\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePAHT-CF\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePET-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Deflection Temperature \/ ℃ (0.45 MPa)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e57 ℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e69 ℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e87 ℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e100 ℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e117 ℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e186 ℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e194 ℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e205 ℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\" class=\"pct_t pct_st\" data-mce-style=\"text-align: center;\"\u003eAccessory Compatibility\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate, High Temperature Plate or Textured PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel 0.4 \/ 0.6 (recommended) \/ 0.8 mm\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHotend with Stainless Steel Nozzle (all size)\u003cbr\u003eHotend with Hardened Steel Nozzle (0.2 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eGlue Stick\u003cbr\u003eBambu Liquid Glue\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eRecommended Printing Settings\u003c\/h2\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDrying Settings before Printing\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e80 °C, 8 - 12 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 20% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e260 - 290 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e80 - 100 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003ePhysical Properties\u003c\/h2\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e1.09 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eVicat Softening Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e212 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e186 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e223 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e6.8 ± 0.6 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eMechanical Properties\u003c\/h2\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e102 ± 7 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e5.8 ± 1.6 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e5460 ± 280 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e151 ± 8 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e40.3 ± 2.5 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003ePrinting Tips\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003e• Drying conditions: 80℃ for 10 hrs. PA6-CF is highly sensitive to humidity. To achieve optimal printing performance, it is recommeded further drying before use and after storage. For more details please refer to:\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/filament\/dry-filament\" title=\"Filament drying cover\" rel=\"noopener\" data-mce-href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/filament\/dry-filament\" target=\"_blank\"\u003eFilament drying instructions\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e•\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eBambu PA6-CF will experience a decrease in strength and stiffness after absorbing water,making it not recommended for printing models with high requirements for strength, stiffness, and dimensional stability, especially thin and elongated models. The prints of PA6-CF usually become tougher and more resistant to impacts, drops, and collisions when they get damp, you can dampen and soften the prints in advance if the model requires high toughness.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• When printing a model with support, it is necessary to remove the support structure within 2 hours to prevent it from being difficult to remove after being damp and softened. Please dry the prints and let them cool down if it is difficult to remove the support, and then remove the support in time.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• Fully impregnating the surface of the prints with paint, wax and other water-proof coatings can inhibit water absorption and prevent them from becoming soft.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e \u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eDownloads\u003c\/h2\u003e\n\u003cdiv class=\"pct_p pct_i-t-text pct_padding-in-mobile pct_flex-pc\"\u003e\n\u003cp\u003e\u003ca title=\"Bambu PA6-CF TDS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/1555\/4032\/files\/Bambu_PA6-CF_Technical_Data_Sheet-v2.pdf\" rel=\"noopener\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/1555\/4032\/files\/Bambu_PA6-CF_Technical_Data_Sheet-v2.pdf\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament TDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Bambu PA6-CF MSDS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/1555\/4032\/files\/Bambu_PA6-CF_MSDS.pdf\" rel=\"noopener\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/1555\/4032\/files\/Bambu_PA6-CF_MSDS.pdf\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament MSDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Bambu PA6-CF RoHS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/Bambu_PA6-CF_RoHS.pdf\" rel=\"noopener\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/Bambu_PA6-CF_RoHS.pdf\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament RoHS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2024-04-08T17:17:42-04:00","created_at":"2024-04-08T14:29:44-04:00","vendor":"Bambu Lab","type":"3D Printing Filaments","tags":["1.75mm","3D Filament","3D Printer Filament","Bambu Lab","Bambu Lab Collection","Bambu Lab Filaments","Filament","high temperature nylon carbon fiber","New Arrival","newfront","Nylon","Nylon 1.75 mm","Nylon 1.75mm","nylon carbon fiber"],"price":4399,"price_min":4399,"price_max":8199,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44586755358950,"title":"1kg","option1":"1kg","option2":null,"option3":null,"sku":"N05-K0-1.75-1000-SPL","requires_shipping":true,"taxable":true,"featured_image":{"id":40809605923046,"product_id":8523944558822,"position":1,"created_at":"2024-04-08T15:53:45-04:00","updated_at":"2024-04-08T15:53:49-04:00","alt":null,"width":700,"height":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/PA6-CF_700x_699079e2-7f8c-4f49-b5b8-43cb1a4e8e9d.png?v=1712606029","variant_ids":[44586755358950,44586755391718]},"available":true,"name":"Bambu Lab PA6-CF Black 1.75mm - 500g\/1kg - 1kg","public_title":"1kg","options":["1kg"],"price":8199,"weight":1400,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"921082525998","featured_media":{"alt":null,"id":33439862751462,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/PA6-CF_700x_699079e2-7f8c-4f49-b5b8-43cb1a4e8e9d.png?v=1712606029"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44586755391718,"title":"500g","option1":"500g","option2":null,"option3":null,"sku":"N05-K0-1.75-500-SPL","requires_shipping":true,"taxable":true,"featured_image":{"id":40809605923046,"product_id":8523944558822,"position":1,"created_at":"2024-04-08T15:53:45-04:00","updated_at":"2024-04-08T15:53:49-04:00","alt":null,"width":700,"height":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/PA6-CF_700x_699079e2-7f8c-4f49-b5b8-43cb1a4e8e9d.png?v=1712606029","variant_ids":[44586755358950,44586755391718]},"available":true,"name":"Bambu Lab PA6-CF Black 1.75mm - 500g\/1kg - 500g","public_title":"500g","options":["500g"],"price":4399,"weight":1000,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"921082526062","featured_media":{"alt":null,"id":33439862751462,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/PA6-CF_700x_699079e2-7f8c-4f49-b5b8-43cb1a4e8e9d.png?v=1712606029"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/files\/PA6-CF_700x_699079e2-7f8c-4f49-b5b8-43cb1a4e8e9d.png?v=1712606029","\/\/www.digitmakers.ca\/cdn\/shop\/files\/Rectangle1307_700x_ccb2a041-6417-43a3-9383-fe244a7313b9.png?v=1712606029","\/\/www.digitmakers.ca\/cdn\/shop\/files\/Rectangle1308_700x_7257d704-683d-45ae-b6b3-5af076b9e8c1.png?v=1712606029"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/PA6-CF_700x_699079e2-7f8c-4f49-b5b8-43cb1a4e8e9d.png?v=1712606029","options":["Size"],"media":[{"alt":null,"id":33439862751462,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/PA6-CF_700x_699079e2-7f8c-4f49-b5b8-43cb1a4e8e9d.png?v=1712606029"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/PA6-CF_700x_699079e2-7f8c-4f49-b5b8-43cb1a4e8e9d.png?v=1712606029","width":700},{"alt":null,"id":33439861670118,"position":2,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Rectangle1307_700x_ccb2a041-6417-43a3-9383-fe244a7313b9.png?v=1712606029"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Rectangle1307_700x_ccb2a041-6417-43a3-9383-fe244a7313b9.png?v=1712606029","width":700},{"alt":null,"id":33439862292710,"position":3,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Rectangle1308_700x_7257d704-683d-45ae-b6b3-5af076b9e8c1.png?v=1712606029"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/Rectangle1308_700x_7257d704-683d-45ae-b6b3-5af076b9e8c1.png?v=1712606029","width":700}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2 class=\"ProductMeta__prodectdesctext Heading u-h6\" data-mce-fragment=\"1\"\u003eCarbon Fiber Reinforced PA6 (Nylon 6)\u003c\/h2\u003e\n\u003ch2 class=\"pct_p\"\u003e\u003cb\u003eProduct Features\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Strength and Stiffness\u003c\/li\u003e\n\u003cli\u003eToughness \u0026amp; Vibration Resistance\u003c\/li\u003e\n\u003cli\u003eExceptional Thermal Resistance\u003c\/li\u003e\n\u003cli\u003eComes with High Temperature Reusable Spool\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm +\/- 0.03mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n\u003cb\u003eCautions for Use\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e0.2 mm Nozzle Not Compatible\u003c\/li\u003e\n\u003cli\u003eStainless Steel Nozzle Not Recommended\u003c\/li\u003e\n\u003cli\u003eDry before Use for the Highest Print Quality\u003c\/li\u003e\n\u003cli\u003eAMS NOT Compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBambu PA6-CF is a carbon fiber reinforced PA6 (Nylon 6) filament. The carbon fiber reinforcement provides significantly high stiffness and strength properties in dry environments and maintains exceptional heat resistance and impact resistance. Similar to other Bambu CF Filaments, these outstanding mechanical properties make it an ideal choice for printing fixtures, clamps, automotive and mechanical components and various structural and engineering parts that used in dry environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg height=\"192\" width=\"551\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Banner-pa6-cf-pc.png?v=1712601077\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Banner-pa6-cf-pc.png?v=1712601077\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eNormal PA-CF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePA6-CF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eImproved %\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eStrength (Bending Strength - XY, dry state)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e128 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e151 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003e\u003cspan\u003e18%\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eStiffness (Bending Modulus - XY, dry state)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e4420 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e5460 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003e\u003cspan\u003e24%\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eImpact \u0026amp; Vibration Resistance\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PA6-CF offers excellent impact resistance, ensuring effective vibration resistance for your prints. It is commonly used to print models that need to withstand impact, collision, and vibration.\u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eExceptional Thermal Resistance\u003c\/h2\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003eFilament\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePLA Basic\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePETG Basic\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eABS\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eASA\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePC\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cspan\u003ePA6-CF\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePAHT-CF\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePET-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Deflection Temperature \/ ℃ (0.45 MPa)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e57 ℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e69 ℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e87 ℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e100 ℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e117 ℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e186 ℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e194 ℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e205 ℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\" class=\"pct_t pct_st\" data-mce-style=\"text-align: center;\"\u003eAccessory Compatibility\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate, High Temperature Plate or Textured PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel 0.4 \/ 0.6 (recommended) \/ 0.8 mm\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHotend with Stainless Steel Nozzle (all size)\u003cbr\u003eHotend with Hardened Steel Nozzle (0.2 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eGlue Stick\u003cbr\u003eBambu Liquid Glue\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eRecommended Printing Settings\u003c\/h2\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDrying Settings before Printing\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e80 °C, 8 - 12 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 20% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e260 - 290 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e80 - 100 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003ePhysical Properties\u003c\/h2\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e1.09 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eVicat Softening Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e212 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e186 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e223 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e6.8 ± 0.6 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eMechanical Properties\u003c\/h2\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e102 ± 7 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e5.8 ± 1.6 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e5460 ± 280 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e151 ± 8 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e40.3 ± 2.5 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003ePrinting Tips\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003e• Drying conditions: 80℃ for 10 hrs. PA6-CF is highly sensitive to humidity. To achieve optimal printing performance, it is recommeded further drying before use and after storage. For more details please refer to:\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/filament\/dry-filament\" title=\"Filament drying cover\" rel=\"noopener\" data-mce-href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/filament\/dry-filament\" target=\"_blank\"\u003eFilament drying instructions\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e•\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eBambu PA6-CF will experience a decrease in strength and stiffness after absorbing water,making it not recommended for printing models with high requirements for strength, stiffness, and dimensional stability, especially thin and elongated models. The prints of PA6-CF usually become tougher and more resistant to impacts, drops, and collisions when they get damp, you can dampen and soften the prints in advance if the model requires high toughness.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• When printing a model with support, it is necessary to remove the support structure within 2 hours to prevent it from being difficult to remove after being damp and softened. Please dry the prints and let them cool down if it is difficult to remove the support, and then remove the support in time.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e• Fully impregnating the surface of the prints with paint, wax and other water-proof coatings can inhibit water absorption and prevent them from becoming soft.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e \u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eDownloads\u003c\/h2\u003e\n\u003cdiv class=\"pct_p pct_i-t-text pct_padding-in-mobile pct_flex-pc\"\u003e\n\u003cp\u003e\u003ca title=\"Bambu PA6-CF TDS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/1555\/4032\/files\/Bambu_PA6-CF_Technical_Data_Sheet-v2.pdf\" rel=\"noopener\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/1555\/4032\/files\/Bambu_PA6-CF_Technical_Data_Sheet-v2.pdf\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament TDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Bambu PA6-CF MSDS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/1555\/4032\/files\/Bambu_PA6-CF_MSDS.pdf\" rel=\"noopener\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/1555\/4032\/files\/Bambu_PA6-CF_MSDS.pdf\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament MSDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Bambu PA6-CF RoHS\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/Bambu_PA6-CF_RoHS.pdf\" rel=\"noopener\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/Bambu_PA6-CF_RoHS.pdf\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eFilament RoHS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Bambu Lab PA6-CF Black 1.75mm - 500g/1kg

$81.99 CAD

Carbon Fiber Reinforced PA6 (Nylon 6) Product Features Superior Strength and Stiffness Toughness & Vibration Resistance Exceptional Thermal Resistance Comes with High Temperature Reusable Spool Diameter: 1.75mm +/- 0.03mm Cautions for Use 0.2 mm Nozzle Not Compatible Stainless Steel Nozzle Not Recommended Dry before Use for the Highest ...

Sale

Economy PLA 1.75mm 1kg

$16.99 CAD $19.99 CAD

{"id":8493452165350,"title":"Economy PLA 1.75mm 1kg","handle":"economy-pla-1-75mm-1kg","description":"\u003ch1 style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e\u003cspan style=\"color: #000000;\" data-mce-style=\"color: #000000;\"\u003eNON-BRITTLE FORMULA\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eYour order may come either in a carboard spool or plastic spool from different vendors (eSUN, D3D Premium, D3D Sigma, etc.), depending on availability. We also accept empty cardboard and plastic spools in useable conditions and give $0.25 credit for each piece. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\" data-mce-style=\"color: #000000;\"\u003e\u003cspan style=\"color: #2b00ff;\" data-mce-fragment=\"1\" data-mce-style=\"color: #2b00ff;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/economy_pla_infograph.png?v=1713547365\" width=\"514\" height=\"514\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a 1kg (2.2lbs) spool of Economy PLA filament in a recycled cardboard or plastic spool, vacuum sealed with a desiccant pack. In our commitment to sustainability and to lower the cost of production, we use the recycled spools from other vendors brought to us by our patrons. We will not be packaging these filaments in individual boxes. \u003c\/p\u003e\n\u003cp\u003eThrough refining our manufacturing process, we've lowered the cost of filaments for consumers without compromising on quality. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTo make Economy PLA compatible with \u003ca href=\"https:\/\/www.digitmakers.ca\/products\/bambu-lab-ams-automatic-material-systems-1?variant=43861755625702\" rel=\"noopener\" data-mce-href=\"https:\/\/www.digitmakers.ca\/products\/bambu-lab-ams-automatic-material-systems-1?variant=43861755625702\" target=\"_blank\"\u003eBambu Lab AMS,\u003c\/a\u003e you can use these \u003ca href=\"https:\/\/www.digitmakers.ca\/products\/cardboard-spool-ring-random-colorspool-sleeve-for-filaments-depot-and-d3d-sigma-random-color\" rel=\"noopener\" data-mce-href=\"https:\/\/www.digitmakers.ca\/products\/cardboard-spool-ring-random-colorspool-sleeve-for-filaments-depot-and-d3d-sigma-random-color\" target=\"_blank\"\u003eCardboard Spool Ring.\u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003eOur filaments are crafted using high-quality, SGS and ROH certified PLA Materials. \u003c\/p\u003e\n\u003cp\u003eThis filament also sticks well to Glass with PVA Glue ,BuildTak, PEI, or blue tape. \u003c\/p\u003e\n\u003ch2\u003ePROPERTIES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 100% Grade A Virgin PLA, non brittle formula\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePACKAGING\u003c\/h2\u003e\n\u003cp\u003eVacuum-sealed in a clear bag with a desiccant pack\u003c\/p\u003e\n\u003ch2\u003ePRINT SETTING\u003c\/h2\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli\u003ePrinting Temperature: 190℃ - 230℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed: Not necessary, but recommended 60℃\u003c\/li\u003e\n\u003cli\u003eCooling Fan: Highly recommended\u003c\/li\u003e\n\u003cli\u003eFirst layer is usually 5°C-10°C higher than subsequent layers \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e","published_at":"2024-04-12T16:37:22-04:00","created_at":"2024-03-27T15:30:43-04:00","vendor":"D3D Sigma","type":"3D Printing Filaments","tags":["1.75mm","3D Printer Filament","budget pla","cheap","cheap filament","cheap pla","economy pla","Filament","hobby","newfront","offer","PLA Filament","standard","Standard PLA 1.75mm","value","value pla"],"price":1699,"price_min":1699,"price_max":1699,"available":true,"price_varies":false,"compare_at_price":1999,"compare_at_price_min":1999,"compare_at_price_max":1999,"compare_at_price_varies":false,"variants":[{"id":44458126868710,"title":"White","option1":"White","option2":null,"option3":null,"sku":"ECONOMY-PLA-WHITE","requires_shipping":true,"taxable":true,"featured_image":{"id":40857276023014,"product_id":8493452165350,"position":1,"created_at":"2024-04-12T16:53:17-04:00","updated_at":"2024-04-12T16:53:19-04:00","alt":null,"width":1400,"height":1550,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/IMG_3832.png?v=1712955199","variant_ids":[44458126868710]},"available":true,"name":"Economy PLA 1.75mm 1kg - White","public_title":"White","options":["White"],"price":1699,"weight":1500,"compare_at_price":1999,"inventory_quantity":31,"inventory_management":"shopify","inventory_policy":"deny","barcode":"26868710","featured_media":{"alt":null,"id":33490712494310,"position":1,"preview_image":{"aspect_ratio":0.903,"height":1550,"width":1400,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/IMG_3832.png?v=1712955199"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44458126835942,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"ECONOMY-PLA-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":40945320198374,"product_id":8493452165350,"position":3,"created_at":"2024-04-19T17:38:55-04:00","updated_at":"2024-04-19T17:39:02-04:00","alt":null,"width":1259,"height":1219,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/econblack2.png?v=1713562742","variant_ids":[44458126835942]},"available":true,"name":"Economy PLA 1.75mm 1kg - Black","public_title":"Black","options":["Black"],"price":1699,"weight":1500,"compare_at_price":1999,"inventory_quantity":39,"inventory_management":"shopify","inventory_policy":"deny","barcode":"26835942","featured_media":{"alt":null,"id":33594115490022,"position":3,"preview_image":{"aspect_ratio":1.033,"height":1219,"width":1259,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/econblack2.png?v=1713562742"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/files\/IMG_3832.png?v=1712955199","\/\/www.digitmakers.ca\/cdn\/shop\/files\/econwhite.png?v=1712955199","\/\/www.digitmakers.ca\/cdn\/shop\/files\/econblack2.png?v=1713562742","\/\/www.digitmakers.ca\/cdn\/shop\/files\/econblack.png?v=1713562742","\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3d-sigma-abs-black.png?v=1713562742","\/\/www.digitmakers.ca\/cdn\/shop\/files\/econwhite2.png?v=1713562742"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/IMG_3832.png?v=1712955199","options":["Color"],"media":[{"alt":null,"id":33490712494310,"position":1,"preview_image":{"aspect_ratio":0.903,"height":1550,"width":1400,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/IMG_3832.png?v=1712955199"},"aspect_ratio":0.903,"height":1550,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/IMG_3832.png?v=1712955199","width":1400},{"alt":null,"id":33320215642342,"position":2,"preview_image":{"aspect_ratio":1.033,"height":1219,"width":1259,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/econwhite.png?v=1712955199"},"aspect_ratio":1.033,"height":1219,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/econwhite.png?v=1712955199","width":1259},{"alt":null,"id":33594115490022,"position":3,"preview_image":{"aspect_ratio":1.033,"height":1219,"width":1259,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/econblack2.png?v=1713562742"},"aspect_ratio":1.033,"height":1219,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/econblack2.png?v=1713562742","width":1259},{"alt":null,"id":33320203092198,"position":4,"preview_image":{"aspect_ratio":1.033,"height":1219,"width":1259,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/econblack.png?v=1713562742"},"aspect_ratio":1.033,"height":1219,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/econblack.png?v=1713562742","width":1259},{"alt":null,"id":33320387379430,"position":5,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3d-sigma-abs-black.png?v=1713562742"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3d-sigma-abs-black.png?v=1713562742","width":500},{"alt":null,"id":33320394195174,"position":6,"preview_image":{"aspect_ratio":1.033,"height":1219,"width":1259,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/econwhite2.png?v=1713562742"},"aspect_ratio":1.033,"height":1219,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/econwhite2.png?v=1713562742","width":1259}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1 style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e\u003cspan style=\"color: #000000;\" data-mce-style=\"color: #000000;\"\u003eNON-BRITTLE FORMULA\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eYour order may come either in a carboard spool or plastic spool from different vendors (eSUN, D3D Premium, D3D Sigma, etc.), depending on availability. We also accept empty cardboard and plastic spools in useable conditions and give $0.25 credit for each piece. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\" data-mce-style=\"color: #000000;\"\u003e\u003cspan style=\"color: #2b00ff;\" data-mce-fragment=\"1\" data-mce-style=\"color: #2b00ff;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/economy_pla_infograph.png?v=1713547365\" width=\"514\" height=\"514\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a 1kg (2.2lbs) spool of Economy PLA filament in a recycled cardboard or plastic spool, vacuum sealed with a desiccant pack. In our commitment to sustainability and to lower the cost of production, we use the recycled spools from other vendors brought to us by our patrons. We will not be packaging these filaments in individual boxes. \u003c\/p\u003e\n\u003cp\u003eThrough refining our manufacturing process, we've lowered the cost of filaments for consumers without compromising on quality. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTo make Economy PLA compatible with \u003ca href=\"https:\/\/www.digitmakers.ca\/products\/bambu-lab-ams-automatic-material-systems-1?variant=43861755625702\" rel=\"noopener\" data-mce-href=\"https:\/\/www.digitmakers.ca\/products\/bambu-lab-ams-automatic-material-systems-1?variant=43861755625702\" target=\"_blank\"\u003eBambu Lab AMS,\u003c\/a\u003e you can use these \u003ca href=\"https:\/\/www.digitmakers.ca\/products\/cardboard-spool-ring-random-colorspool-sleeve-for-filaments-depot-and-d3d-sigma-random-color\" rel=\"noopener\" data-mce-href=\"https:\/\/www.digitmakers.ca\/products\/cardboard-spool-ring-random-colorspool-sleeve-for-filaments-depot-and-d3d-sigma-random-color\" target=\"_blank\"\u003eCardboard Spool Ring.\u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003eOur filaments are crafted using high-quality, SGS and ROH certified PLA Materials. \u003c\/p\u003e\n\u003cp\u003eThis filament also sticks well to Glass with PVA Glue ,BuildTak, PEI, or blue tape. \u003c\/p\u003e\n\u003ch2\u003ePROPERTIES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 100% Grade A Virgin PLA, non brittle formula\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePACKAGING\u003c\/h2\u003e\n\u003cp\u003eVacuum-sealed in a clear bag with a desiccant pack\u003c\/p\u003e\n\u003ch2\u003ePRINT SETTING\u003c\/h2\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli\u003ePrinting Temperature: 190℃ - 230℃\u003c\/li\u003e\n\u003cli\u003eHeated Bed: Not necessary, but recommended 60℃\u003c\/li\u003e\n\u003cli\u003eCooling Fan: Highly recommended\u003c\/li\u003e\n\u003cli\u003eFirst layer is usually 5°C-10°C higher than subsequent layers \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e"}

Economy PLA 1.75mm 1kg

$16.99 CAD

NON-BRITTLE FORMULA Your order may come either in a carboard spool or plastic spool from different vendors (eSUN, D3D Premium, D3D Sigma, etc.), depending on availability. We also accept empty cardboard and plastic spools in useable conditions and give $0.25 credit for each piece. This is a 1kg (2.2lbs) spool of Economy PLA filament in a recyc...

D3D Sigma PLA 1.75mm 1kg Various Colors

$23.99 CAD

{"id":656855007268,"title":"D3D Sigma PLA 1.75mm 1kg Various Colors","handle":"d3d-sigma-pla-1-75mm-1kg-various-colors","description":"\u003ch2 style=\"text-align: center;\"\u003e\n\u003cstrong\u003eNOTE: \u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eWe are converting all of our D3D Sigma PLA to cardboard spools with the new manufacturer\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eColours might vary\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e\u003cstrong\u003e\u003cem\u003eTo make the cardboard spool compatible with\u003ca title=\"Bambu Lab AMS\" href=\"https:\/\/www.digitmakers.ca\/products\/bambu-lab-ams-automatic-material-systems-1\" target=\"_blank\" data-mce-href=\"https:\/\/www.digitmakers.ca\/products\/bambu-lab-ams-automatic-material-systems-1\"\u003e\u003cspan\u003e \u003c\/span\u003eBambu Lab AMS\u003c\/a\u003e, use this\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"spool sleeve or cardboard ring for bambu lab ams\" href=\"https:\/\/www.digitmakers.ca\/products\/spool-sleeve-for-filaments-depot-and-d3d-sigma-random-color\" target=\"_blank\" data-mce-href=\"https:\/\/www.digitmakers.ca\/products\/spool-sleeve-for-filaments-depot-and-d3d-sigma-random-color\"\u003espool sleeve \/ cardboard rings. \u003c\/a\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e1kg (2.2lbs) spool of \u003cstrong\u003eD3D Sigma\u003c\/strong\u003e is Standard PLA filament vacuum sealed with a desiccant pack.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ecolour-changing filament\u003c\/strong\u003e changes colour thermally (orange, when below 33 degrees Celsius; yellow, when above 33 degrees Celsius). \u003c\/p\u003e\n\u003cp\u003eD3D Sigma is another version of D3D Filaments Series, The Sigma has more matte finish and it is made for prototyping and everyday use. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Filament is made with High Grade PLA Filaments SGS and ROH certified. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe have optimized the manufacturing process and reduced the price of the filaments to the end user, we simply don't cut corners. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eMaterial:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e100% Grade A Virgin PLA \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eProperty:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eNon-Brittle Formula Blend\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Process: \u003c\/strong\u003eControlled using Non-Contact Laser Diameter Gauge:±0.03 mm Tolerance. Monitored with rapid, reproducible and repeatable measurements to exact dimensional tolerances. Maintaining high consistency of dimensional accuracy, the production process embedded with Error Proofing Mechanism (POKE-YOKE) that automatically stop a production line the moment a non-conforming measurement is detected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003ePrint Settings\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinting Temperature :\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e190°C - 230°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeated Bed\u003c\/strong\u003e: PLA can be printed with or without a heated print bed, however, if your 3D printer does have a heated bed, it is recommended that you set your bed temperature to approximately 60°C.\u003c\/li\u003e\n\u003cli\u003eFirst layer usually 5°C-10°C higher than subsequent layers.\u003c\/li\u003e\n\u003cli\u003eSticks well to Glass with PVA Glue ,BuildTak, PEI, or blue tape.\u003c\/li\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Fan:\u003c\/strong\u003e \u003cstrong\u003e\u003c\/strong\u003eHighly recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eActual Prints\u003c\/h4\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/d3dsigmaorange_480x480.png?v=1706727267\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2018-05-03T10:25:20-04:00","created_at":"2018-04-26T11:23:57-04:00","vendor":"D3D Sigma","type":"Filaments","tags":["1.75mm","3D Printer Filament","back in stock","cheap","cheap filament","cheap pla","Filament","hobby","newfront","offer","PLA Filament","standard","Standard PLA 1.75mm","value","value pla"],"price":2399,"price_min":2399,"price_max":2399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43928004067558,"title":"Baby Blue","option1":"Baby Blue","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-BBL","requires_shipping":true,"taxable":true,"featured_image":{"id":39906217951462,"product_id":656855007268,"position":2,"created_at":"2023-10-10T15:20:55-04:00","updated_at":"2023-10-10T15:21:02-04:00","alt":null,"width":2000,"height":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmababyblue.png?v=1696965662","variant_ids":[43928004067558]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Baby Blue","public_title":"Baby Blue","options":["Baby Blue"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":25,"inventory_management":"shopify","inventory_policy":"deny","barcode":"04067558","featured_media":{"alt":null,"id":32513858044134,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmababyblue.png?v=1696965662"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":7673207652388,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":39102861574374,"product_id":656855007268,"position":3,"created_at":"2023-01-19T16:58:59-05:00","updated_at":"2023-10-10T15:21:02-04:00","alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","width":2048,"height":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Black_9a8d7318-22fb-4529-835c-33349dee5104.png?v=1696965662","variant_ids":[7673207652388]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Black","public_title":"Black","options":["Black"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":39,"inventory_management":"shopify","inventory_policy":"deny","barcode":"07652387","featured_media":{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":31696102785254,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Black_9a8d7318-22fb-4529-835c-33349dee5104.png?v=1696965662"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":11969598095396,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-BLU","requires_shipping":true,"taxable":true,"featured_image":{"id":39098955202790,"product_id":656855007268,"position":4,"created_at":"2023-01-18T15:45:17-05:00","updated_at":"2023-10-11T14:49:35-04:00","alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","width":2048,"height":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Blue_c9e28f8d-6975-4dec-9e75-84fa628fc477.png?v=1697050175","variant_ids":[11969598095396]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Blue","public_title":"Blue","options":["Blue"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":"11006008","featured_media":{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":31692122292454,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Blue_c9e28f8d-6975-4dec-9e75-84fa628fc477.png?v=1697050175"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43637159330022,"title":"Bright Green","option1":"Bright Green","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-BRT-GRN","requires_shipping":true,"taxable":true,"featured_image":{"id":39136384844006,"product_id":656855007268,"position":5,"created_at":"2023-01-31T15:35:17-05:00","updated_at":"2024-01-26T16:56:15-05:00","alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","width":2048,"height":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/BrightGreen.png?v=1706306175","variant_ids":[43637159330022]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Bright Green","public_title":"Bright Green","options":["Bright Green"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":"59330022","featured_media":{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":31730288165094,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/BrightGreen.png?v=1706306175"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43905473347814,"title":"Cappuccino","option1":"Cappuccino","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-CAP","requires_shipping":true,"taxable":true,"featured_image":{"id":39857505009894,"product_id":656855007268,"position":7,"created_at":"2023-09-25T14:43:14-04:00","updated_at":"2024-04-12T16:08:29-04:00","alt":null,"width":2000,"height":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaplacapuccino.png?v=1712952509","variant_ids":[43905473347814]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Cappuccino","public_title":"Cappuccino","options":["Cappuccino"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":30,"inventory_management":"shopify","inventory_policy":"deny","barcode":"73347814","featured_media":{"alt":null,"id":32464273342694,"position":7,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaplacapuccino.png?v=1712952509"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44627827785958,"title":"Dark Grey","option1":"Dark Grey","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-GRY","requires_shipping":true,"taxable":true,"featured_image":{"id":40857207505126,"product_id":656855007268,"position":8,"created_at":"2024-04-12T16:07:37-04:00","updated_at":"2024-04-12T16:08:29-04:00","alt":null,"width":3456,"height":4608,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmapladarkgrey.png?v=1712952509","variant_ids":[44627827785958]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Dark Grey","public_title":"Dark Grey","options":["Dark Grey"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":54,"inventory_management":"shopify","inventory_policy":"deny","barcode":"21011016","featured_media":{"alt":null,"id":33490641944806,"position":8,"preview_image":{"aspect_ratio":0.75,"height":4608,"width":3456,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmapladarkgrey.png?v=1712952509"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43956553548006,"title":"Evergreen","option1":"Evergreen","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-EVRGRN","requires_shipping":true,"taxable":true,"featured_image":{"id":39920576889062,"product_id":656855007268,"position":9,"created_at":"2023-10-16T13:57:49-04:00","updated_at":"2024-04-12T16:08:16-04:00","alt":null,"width":2397,"height":2073,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaPLAEvergreen.png?v=1712952496","variant_ids":[43956553548006]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Evergreen","public_title":"Evergreen","options":["Evergreen"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":40,"inventory_management":"shopify","inventory_policy":"deny","barcode":"53548006","featured_media":{"alt":null,"id":32528655253734,"position":9,"preview_image":{"aspect_ratio":1.156,"height":2073,"width":2397,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaPLAEvergreen.png?v=1712952496"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43944128413926,"title":"Fuchsia","option1":"Fuchsia","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-FUCHSIA","requires_shipping":true,"taxable":true,"featured_image":{"id":39909127454950,"product_id":656855007268,"position":10,"created_at":"2023-10-11T14:46:05-04:00","updated_at":"2024-04-12T16:08:16-04:00","alt":null,"width":2397,"height":2073,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaFuchsia.png?v=1712952496","variant_ids":[43944128413926]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Fuchsia","public_title":"Fuchsia","options":["Fuchsia"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":23,"inventory_management":"shopify","inventory_policy":"deny","barcode":"28413926","featured_media":{"alt":null,"id":32516877123814,"position":10,"preview_image":{"aspect_ratio":1.156,"height":2073,"width":2397,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaFuchsia.png?v=1712952496"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":11969598128164,"title":"Green","option1":"Green","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-GRN","requires_shipping":true,"taxable":true,"featured_image":{"id":36586799988966,"product_id":656855007268,"position":11,"created_at":"2022-01-19T16:34:23-05:00","updated_at":"2024-04-12T16:08:16-04:00","alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","width":1000,"height":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/D3DSigmaPLAGREEN.jpg?v=1712952496","variant_ids":[11969598128164]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Green","public_title":"Green","options":["Green"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":"11005001","featured_media":{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":29140332052710,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/D3DSigmaPLAGREEN.jpg?v=1712952496"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43749457330406,"title":"Gold","option1":"Gold","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-BRT-GLD","requires_shipping":true,"taxable":true,"featured_image":{"id":40352314720486,"product_id":656855007268,"position":6,"created_at":"2024-01-26T16:55:58-05:00","updated_at":"2024-04-12T16:08:29-04:00","alt":null,"width":2397,"height":2073,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmagold.png?v=1712952509","variant_ids":[43749457330406]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Gold","public_title":"Gold","options":["Gold"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":"57330406","featured_media":{"alt":null,"id":32970358292710,"position":6,"preview_image":{"aspect_ratio":1.156,"height":2073,"width":2397,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmagold.png?v=1712952509"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43909906202854,"title":"Lavender Purple","option1":"Lavender Purple","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-LVNDR-PURPL","requires_shipping":true,"taxable":true,"featured_image":{"id":39861634138342,"product_id":656855007268,"position":12,"created_at":"2023-09-26T16:04:08-04:00","updated_at":"2024-04-12T16:08:16-04:00","alt":null,"width":2000,"height":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmalavenderpurple.png?v=1712952496","variant_ids":[43909906202854]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Lavender Purple","public_title":"Lavender Purple","options":["Lavender Purple"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":33,"inventory_management":"shopify","inventory_policy":"deny","barcode":"076522023","featured_media":{"alt":null,"id":32468480262374,"position":12,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmalavenderpurple.png?v=1712952496"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43904564887782,"title":"Light Grey","option1":"Light Grey","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-GREY","requires_shipping":true,"taxable":true,"featured_image":{"id":39857505042662,"product_id":656855007268,"position":13,"created_at":"2023-09-25T14:43:14-04:00","updated_at":"2024-04-12T16:08:16-04:00","alt":null,"width":2000,"height":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmalightgrey.png?v=1712952496","variant_ids":[43904564887782]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Light Grey","public_title":"Light Grey","options":["Light Grey"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"64887782","featured_media":{"alt":null,"id":32464273309926,"position":13,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmalightgrey.png?v=1712952496"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43750979436774,"title":"Lime Green","option1":"Lime Green","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-BRT-LIMGRN","requires_shipping":true,"taxable":true,"featured_image":{"id":39420262678758,"product_id":656855007268,"position":14,"created_at":"2023-04-19T15:28:56-04:00","updated_at":"2024-04-12T16:08:16-04:00","alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","width":2048,"height":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/LimeGreen.png?v=1712952496","variant_ids":[43750979436774]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Lime Green","public_title":"Lime Green","options":["Lime Green"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":21,"inventory_management":"shopify","inventory_policy":"deny","barcode":"79436774","featured_media":{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":32018491834598,"position":14,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/LimeGreen.png?v=1712952496"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":11969598160932,"title":"Natural","option1":"Natural","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-NTRL","requires_shipping":true,"taxable":true,"featured_image":{"id":39678030086374,"product_id":656855007268,"position":15,"created_at":"2023-07-13T15:30:40-04:00","updated_at":"2024-04-12T16:08:16-04:00","alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","width":2048,"height":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/natural.png?v=1712952496","variant_ids":[11969598160932]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Natural","public_title":"Natural","options":["Natural"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":"11100003","featured_media":{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":32279904846054,"position":15,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/natural.png?v=1712952496"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":11969598292004,"title":"Orange","option1":"Orange","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-ORG","requires_shipping":true,"taxable":true,"featured_image":{"id":39460595532006,"product_id":656855007268,"position":16,"created_at":"2023-05-02T15:28:16-04:00","updated_at":"2024-04-12T16:08:16-04:00","alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","width":2048,"height":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Orange_f3401e75-21e6-4ad0-8e95-03d95914dc5c.png?v=1712952496","variant_ids":[11969598292004]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Orange","public_title":"Orange","options":["Orange"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":40,"inventory_management":"shopify","inventory_policy":"deny","barcode":"11003007","featured_media":{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":32059388690662,"position":16,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Orange_f3401e75-21e6-4ad0-8e95-03d95914dc5c.png?v=1712952496"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44197137481958,"title":"Pastel Peach","option1":"Pastel Peach","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-PSTL-PCH","requires_shipping":true,"taxable":true,"featured_image":{"id":40286077780198,"product_id":656855007268,"position":17,"created_at":"2024-01-12T15:52:22-05:00","updated_at":"2024-04-12T16:08:16-04:00","alt":null,"width":2397,"height":2073,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmapastelpeach.png?v=1712952496","variant_ids":[44197137481958]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Pastel Peach","public_title":"Pastel Peach","options":["Pastel Peach"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":"37481958","featured_media":{"alt":null,"id":32902736806118,"position":17,"preview_image":{"aspect_ratio":1.156,"height":2073,"width":2397,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmapastelpeach.png?v=1712952496"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43906553053414,"title":"Pumpkin Orange","option1":"Pumpkin Orange","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-PKNM ORG","requires_shipping":true,"taxable":true,"featured_image":{"id":39857486135526,"product_id":656855007268,"position":18,"created_at":"2023-09-25T14:31:34-04:00","updated_at":"2024-04-12T16:08:16-04:00","alt":null,"width":2000,"height":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmapumpkinorange.png?v=1712952496","variant_ids":[43906553053414]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Pumpkin Orange","public_title":"Pumpkin Orange","options":["Pumpkin Orange"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":30,"inventory_management":"shopify","inventory_policy":"deny","barcode":"53053414","featured_media":{"alt":null,"id":32464254140646,"position":18,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmapumpkinorange.png?v=1712952496"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":11969598193700,"title":"Red","option1":"Red","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-RED","requires_shipping":true,"taxable":true,"featured_image":{"id":39098810695910,"product_id":656855007268,"position":19,"created_at":"2023-01-18T14:53:46-05:00","updated_at":"2024-04-12T16:08:16-04:00","alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","width":2048,"height":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/red.png?v=1712952496","variant_ids":[11969598193700]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Red","public_title":"Red","options":["Red"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":"11002000","featured_media":{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":31691975557350,"position":19,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/red.png?v=1712952496"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":37272094736546,"title":"Silver","option1":"Silver","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-SLV","requires_shipping":true,"taxable":true,"featured_image":{"id":39229291987174,"product_id":656855007268,"position":20,"created_at":"2023-02-28T14:12:12-05:00","updated_at":"2024-04-12T16:08:16-04:00","alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","width":2048,"height":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Silver.png?v=1712952496","variant_ids":[37272094736546]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Silver","public_title":"Silver","options":["Silver"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":96,"inventory_management":"shopify","inventory_policy":"deny","barcode":"94736540","featured_media":{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":31825211523302,"position":20,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Silver.png?v=1712952496"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43928819040486,"title":"Strawberry Cream","option1":"Strawberry Cream","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-STRYCRM","requires_shipping":true,"taxable":true,"featured_image":{"id":39906272510182,"product_id":656855007268,"position":21,"created_at":"2023-10-10T15:53:01-04:00","updated_at":"2024-04-12T16:08:16-04:00","alt":null,"width":2000,"height":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaplastrawberrycream.png?v=1712952496","variant_ids":[43928819040486]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Strawberry Cream","public_title":"Strawberry Cream","options":["Strawberry Cream"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":33,"inventory_management":"shopify","inventory_policy":"continue","barcode":"19040486","featured_media":{"alt":null,"id":32513914208486,"position":21,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaplastrawberrycream.png?v=1712952496"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43911877066982,"title":"Urban Red","option1":"Urban Red","option2":null,"option3":null,"sku":"D3D-SGMA-PLA-URBNRED","requires_shipping":true,"taxable":true,"featured_image":{"id":39865788596454,"product_id":656855007268,"position":22,"created_at":"2023-09-28T14:43:01-04:00","updated_at":"2024-04-12T16:08:16-04:00","alt":null,"width":2000,"height":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaurbanred.png?v=1712952496","variant_ids":[43911877066982]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - Urban Red","public_title":"Urban Red","options":["Urban Red"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":30,"inventory_management":"shopify","inventory_policy":"deny","barcode":"77066982","featured_media":{"alt":null,"id":32472790204646,"position":22,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaurbanred.png?v=1712952496"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":11969598259236,"title":"White","option1":"White","option2":null,"option3":null,"sku":"D3D-SIG-FL-PLA-1.75-1KG-WHT","requires_shipping":true,"taxable":true,"featured_image":{"id":39098810597606,"product_id":656855007268,"position":23,"created_at":"2023-01-18T14:53:46-05:00","updated_at":"2024-04-12T16:08:16-04:00","alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","width":2048,"height":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/white.png?v=1712952496","variant_ids":[11969598259236]},"available":true,"name":"D3D Sigma PLA 1.75mm 1kg Various Colors - White","public_title":"White","options":["White"],"price":2399,"weight":1500,"compare_at_price":null,"inventory_quantity":128,"inventory_management":"shopify","inventory_policy":"deny","barcode":"11001003","featured_media":{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":31691975590118,"position":23,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/white.png?v=1712952496"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmagroup.png?v=1696267607","\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmababyblue.png?v=1696965662","\/\/www.digitmakers.ca\/cdn\/shop\/products\/Black_9a8d7318-22fb-4529-835c-33349dee5104.png?v=1696965662","\/\/www.digitmakers.ca\/cdn\/shop\/products\/Blue_c9e28f8d-6975-4dec-9e75-84fa628fc477.png?v=1697050175","\/\/www.digitmakers.ca\/cdn\/shop\/products\/BrightGreen.png?v=1706306175","\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmagold.png?v=1712952509","\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaplacapuccino.png?v=1712952509","\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmapladarkgrey.png?v=1712952509","\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaPLAEvergreen.png?v=1712952496","\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaFuchsia.png?v=1712952496","\/\/www.digitmakers.ca\/cdn\/shop\/products\/D3DSigmaPLAGREEN.jpg?v=1712952496","\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmalavenderpurple.png?v=1712952496","\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmalightgrey.png?v=1712952496","\/\/www.digitmakers.ca\/cdn\/shop\/products\/LimeGreen.png?v=1712952496","\/\/www.digitmakers.ca\/cdn\/shop\/files\/natural.png?v=1712952496","\/\/www.digitmakers.ca\/cdn\/shop\/products\/Orange_f3401e75-21e6-4ad0-8e95-03d95914dc5c.png?v=1712952496","\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmapastelpeach.png?v=1712952496","\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmapumpkinorange.png?v=1712952496","\/\/www.digitmakers.ca\/cdn\/shop\/products\/red.png?v=1712952496","\/\/www.digitmakers.ca\/cdn\/shop\/products\/Silver.png?v=1712952496","\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaplastrawberrycream.png?v=1712952496","\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaurbanred.png?v=1712952496","\/\/www.digitmakers.ca\/cdn\/shop\/products\/white.png?v=1712952496"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmagroup.png?v=1696267607","options":["Color"],"media":[{"alt":null,"id":32479629213926,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmagroup.png?v=1696267607"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmagroup.png?v=1696267607","width":2000},{"alt":null,"id":32513858044134,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmababyblue.png?v=1696965662"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmababyblue.png?v=1696965662","width":2000},{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":31696102785254,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Black_9a8d7318-22fb-4529-835c-33349dee5104.png?v=1696965662"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Black_9a8d7318-22fb-4529-835c-33349dee5104.png?v=1696965662","width":2048},{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":31692122292454,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Blue_c9e28f8d-6975-4dec-9e75-84fa628fc477.png?v=1697050175"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Blue_c9e28f8d-6975-4dec-9e75-84fa628fc477.png?v=1697050175","width":2048},{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":31730288165094,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/BrightGreen.png?v=1706306175"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/BrightGreen.png?v=1706306175","width":2048},{"alt":null,"id":32970358292710,"position":6,"preview_image":{"aspect_ratio":1.156,"height":2073,"width":2397,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmagold.png?v=1712952509"},"aspect_ratio":1.156,"height":2073,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmagold.png?v=1712952509","width":2397},{"alt":null,"id":32464273342694,"position":7,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaplacapuccino.png?v=1712952509"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaplacapuccino.png?v=1712952509","width":2000},{"alt":null,"id":33490641944806,"position":8,"preview_image":{"aspect_ratio":0.75,"height":4608,"width":3456,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmapladarkgrey.png?v=1712952509"},"aspect_ratio":0.75,"height":4608,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmapladarkgrey.png?v=1712952509","width":3456},{"alt":null,"id":32528655253734,"position":9,"preview_image":{"aspect_ratio":1.156,"height":2073,"width":2397,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaPLAEvergreen.png?v=1712952496"},"aspect_ratio":1.156,"height":2073,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaPLAEvergreen.png?v=1712952496","width":2397},{"alt":null,"id":32516877123814,"position":10,"preview_image":{"aspect_ratio":1.156,"height":2073,"width":2397,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaFuchsia.png?v=1712952496"},"aspect_ratio":1.156,"height":2073,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaFuchsia.png?v=1712952496","width":2397},{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":29140332052710,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/D3DSigmaPLAGREEN.jpg?v=1712952496"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/D3DSigmaPLAGREEN.jpg?v=1712952496","width":1000},{"alt":null,"id":32468480262374,"position":12,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmalavenderpurple.png?v=1712952496"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmalavenderpurple.png?v=1712952496","width":2000},{"alt":null,"id":32464273309926,"position":13,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmalightgrey.png?v=1712952496"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmalightgrey.png?v=1712952496","width":2000},{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":32018491834598,"position":14,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/LimeGreen.png?v=1712952496"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/LimeGreen.png?v=1712952496","width":2048},{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":32279904846054,"position":15,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/natural.png?v=1712952496"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/natural.png?v=1712952496","width":2048},{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":32059388690662,"position":16,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Orange_f3401e75-21e6-4ad0-8e95-03d95914dc5c.png?v=1712952496"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Orange_f3401e75-21e6-4ad0-8e95-03d95914dc5c.png?v=1712952496","width":2048},{"alt":null,"id":32902736806118,"position":17,"preview_image":{"aspect_ratio":1.156,"height":2073,"width":2397,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmapastelpeach.png?v=1712952496"},"aspect_ratio":1.156,"height":2073,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmapastelpeach.png?v=1712952496","width":2397},{"alt":null,"id":32464254140646,"position":18,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmapumpkinorange.png?v=1712952496"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmapumpkinorange.png?v=1712952496","width":2000},{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":31691975557350,"position":19,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/red.png?v=1712952496"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/red.png?v=1712952496","width":2048},{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":31825211523302,"position":20,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Silver.png?v=1712952496"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Silver.png?v=1712952496","width":2048},{"alt":null,"id":32513914208486,"position":21,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaplastrawberrycream.png?v=1712952496"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaplastrawberrycream.png?v=1712952496","width":2000},{"alt":null,"id":32472790204646,"position":22,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaurbanred.png?v=1712952496"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/d3dsigmaurbanred.png?v=1712952496","width":2000},{"alt":"D3D Sigma PLA 1.75mm 1kg Various Colors - Digitmakers.ca","id":31691975590118,"position":23,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/white.png?v=1712952496"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/white.png?v=1712952496","width":2048}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2 style=\"text-align: center;\"\u003e\n\u003cstrong\u003eNOTE: \u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eWe are converting all of our D3D Sigma PLA to cardboard spools with the new manufacturer\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eColours might vary\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e\u003cstrong\u003e\u003cem\u003eTo make the cardboard spool compatible with\u003ca title=\"Bambu Lab AMS\" href=\"https:\/\/www.digitmakers.ca\/products\/bambu-lab-ams-automatic-material-systems-1\" target=\"_blank\" data-mce-href=\"https:\/\/www.digitmakers.ca\/products\/bambu-lab-ams-automatic-material-systems-1\"\u003e\u003cspan\u003e \u003c\/span\u003eBambu Lab AMS\u003c\/a\u003e, use this\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"spool sleeve or cardboard ring for bambu lab ams\" href=\"https:\/\/www.digitmakers.ca\/products\/spool-sleeve-for-filaments-depot-and-d3d-sigma-random-color\" target=\"_blank\" data-mce-href=\"https:\/\/www.digitmakers.ca\/products\/spool-sleeve-for-filaments-depot-and-d3d-sigma-random-color\"\u003espool sleeve \/ cardboard rings. \u003c\/a\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e1kg (2.2lbs) spool of \u003cstrong\u003eD3D Sigma\u003c\/strong\u003e is Standard PLA filament vacuum sealed with a desiccant pack.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ecolour-changing filament\u003c\/strong\u003e changes colour thermally (orange, when below 33 degrees Celsius; yellow, when above 33 degrees Celsius). \u003c\/p\u003e\n\u003cp\u003eD3D Sigma is another version of D3D Filaments Series, The Sigma has more matte finish and it is made for prototyping and everyday use. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Filament is made with High Grade PLA Filaments SGS and ROH certified. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe have optimized the manufacturing process and reduced the price of the filaments to the end user, we simply don't cut corners. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eMaterial:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e100% Grade A Virgin PLA \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eProperty:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eNon-Brittle Formula Blend\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Process: \u003c\/strong\u003eControlled using Non-Contact Laser Diameter Gauge:±0.03 mm Tolerance. Monitored with rapid, reproducible and repeatable measurements to exact dimensional tolerances. Maintaining high consistency of dimensional accuracy, the production process embedded with Error Proofing Mechanism (POKE-YOKE) that automatically stop a production line the moment a non-conforming measurement is detected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003ePrint Settings\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinting Temperature :\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e190°C - 230°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeated Bed\u003c\/strong\u003e: PLA can be printed with or without a heated print bed, however, if your 3D printer does have a heated bed, it is recommended that you set your bed temperature to approximately 60°C.\u003c\/li\u003e\n\u003cli\u003eFirst layer usually 5°C-10°C higher than subsequent layers.\u003c\/li\u003e\n\u003cli\u003eSticks well to Glass with PVA Glue ,BuildTak, PEI, or blue tape.\u003c\/li\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Fan:\u003c\/strong\u003e \u003cstrong\u003e\u003c\/strong\u003eHighly recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eActual Prints\u003c\/h4\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/d3dsigmaorange_480x480.png?v=1706727267\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e"}

D3D Sigma PLA 1.75mm 1kg Various Colors

$23.99 CAD

NOTE: We are converting all of our D3D Sigma PLA to cardboard spools with the new manufacturer Colours might vary To make the cardboard spool compatible with Bambu Lab AMS, use this spool sleeve / cardboard rings. 1kg (2.2lbs) spool of D3D Sigma is Standard PLA filament vacuum sealed with a desiccant pack. The colour-changing filament cha...

Color

Polylite ASA - 3kg 1.75mm

$102.99 CAD

{"id":8481467531494,"title":"Polylite ASA - 3kg 1.75mm","handle":"polylite-asa-3kg","description":"\u003cdiv class=\"card__header\" data-mce-fragment=\"1\"\u003e\n\u003ch2 class=\"card__title heading h3\" data-mce-fragment=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card__section\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"rte text--pull\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePolyLite™ ASA is an alternative to ABS with an improved weather resistance. Its UV resistance and excellent mechanical properties make it the perfect choice for real life applications.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e\u003clabel for=\"so-tab-1\"\u003e\u003cspan\u003eDifference between ASA and ABS\u003c\/span\u003e\u003c\/label\u003e\u003c\/h2\u003e\n\u003cdiv class=\"so-tab-content\"\u003e\n\u003cp\u003eASA is almost exactly the same as ABS with 1 major difference and 1 minor difference:\u003cbr\u003eThe major difference is ASA is extremely good at weather resistance. (Resistance to UV light and environmental stress cracking)\u003cbr\u003eThe minor difference is ASA prints with a nicer matte finish slightly hiding the layer lines.\u003c\/p\u003e\n\u003ch2\u003e\u003clabel for=\"so-tab-2\"\u003e\u003cspan\u003ePrinting and Drying Settings\u003c\/span\u003e\u003c\/label\u003e\u003c\/h2\u003e\n\u003cdiv class=\"so-tab-content\"\u003e\n\u003cp\u003ePrinting Temperature: 240˚C - 260˚C\u003cbr\u003eBed Temperature: 75˚C - 95˚C\u003cbr\u003ePrinting Speed: 30mm\/s - 50mm\/s\u003cbr\u003eFan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 1mm\u003cbr\u003eRetraction Speed: 20mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003e\u003cbr\u003eDrying Settings: 70˚C for 6h\u003cbr\u003e(Only if the material has absorbed moisture)\u003c\/p\u003e\n\u003ch2\u003e\u003clabel for=\"so-tab-3\"\u003eDoes PolyLite™ ASA requires an enclosed 3D printer?\u003c\/label\u003e\u003c\/h2\u003e\n\u003cdiv class=\"so-tab-content\"\u003e\n\u003cp\u003eYes and no, you can watch the reviews below for more information but the rule of thumb is the bigger your print (more than the size of your fist) the more the enclosure will be required for dimensional stability.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eSpool Dimensions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e3kg cardboard spool:\u003c\/span\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpool Inner Hole Diameter: \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e55±1mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpool Diameter: 250±1mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpool Width: 117.2±2mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpool Weight: 425±21.3g\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2024-04-04T16:57:54-04:00","created_at":"2024-03-19T17:05:16-04:00","vendor":"Polymaker","type":"3D Printing Filaments","tags":["1.75mm","3D Printer Filament","ASA","Asa 3kg","asa filament","ASA\/PET 1.75mm","New Arrival","newfront","polymaker polylite asa"],"price":10299,"price_min":10299,"price_max":10299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44422787629286,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PLMK-POLYLTE-ASA-3KG-BLACK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polylite ASA - 3kg 1.75mm","public_title":null,"options":["Default Title"],"price":10299,"weight":4000,"compare_at_price":null,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936712619","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/files\/PF01044_Asymmetric_500x_340e84e2-02a9-4157-8ccb-ca49c25b08ea.png?v=1712264344","\/\/www.digitmakers.ca\/cdn\/shop\/files\/PF01044_Side_500x_1d84d60d-f648-4a8c-ac31-723b1cd369d6.png?v=1712264344"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/PF01044_Asymmetric_500x_340e84e2-02a9-4157-8ccb-ca49c25b08ea.png?v=1712264344","options":["Title"],"media":[{"alt":null,"id":33409929248998,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/PF01044_Asymmetric_500x_340e84e2-02a9-4157-8ccb-ca49c25b08ea.png?v=1712264344"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/PF01044_Asymmetric_500x_340e84e2-02a9-4157-8ccb-ca49c25b08ea.png?v=1712264344","width":500},{"alt":null,"id":33409927839974,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/PF01044_Side_500x_1d84d60d-f648-4a8c-ac31-723b1cd369d6.png?v=1712264344"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/PF01044_Side_500x_1d84d60d-f648-4a8c-ac31-723b1cd369d6.png?v=1712264344","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"card__header\" data-mce-fragment=\"1\"\u003e\n\u003ch2 class=\"card__title heading h3\" data-mce-fragment=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card__section\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"rte text--pull\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePolyLite™ ASA is an alternative to ABS with an improved weather resistance. Its UV resistance and excellent mechanical properties make it the perfect choice for real life applications.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e\u003clabel for=\"so-tab-1\"\u003e\u003cspan\u003eDifference between ASA and ABS\u003c\/span\u003e\u003c\/label\u003e\u003c\/h2\u003e\n\u003cdiv class=\"so-tab-content\"\u003e\n\u003cp\u003eASA is almost exactly the same as ABS with 1 major difference and 1 minor difference:\u003cbr\u003eThe major difference is ASA is extremely good at weather resistance. (Resistance to UV light and environmental stress cracking)\u003cbr\u003eThe minor difference is ASA prints with a nicer matte finish slightly hiding the layer lines.\u003c\/p\u003e\n\u003ch2\u003e\u003clabel for=\"so-tab-2\"\u003e\u003cspan\u003ePrinting and Drying Settings\u003c\/span\u003e\u003c\/label\u003e\u003c\/h2\u003e\n\u003cdiv class=\"so-tab-content\"\u003e\n\u003cp\u003ePrinting Temperature: 240˚C - 260˚C\u003cbr\u003eBed Temperature: 75˚C - 95˚C\u003cbr\u003ePrinting Speed: 30mm\/s - 50mm\/s\u003cbr\u003eFan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 1mm\u003cbr\u003eRetraction Speed: 20mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003e\u003cbr\u003eDrying Settings: 70˚C for 6h\u003cbr\u003e(Only if the material has absorbed moisture)\u003c\/p\u003e\n\u003ch2\u003e\u003clabel for=\"so-tab-3\"\u003eDoes PolyLite™ ASA requires an enclosed 3D printer?\u003c\/label\u003e\u003c\/h2\u003e\n\u003cdiv class=\"so-tab-content\"\u003e\n\u003cp\u003eYes and no, you can watch the reviews below for more information but the rule of thumb is the bigger your print (more than the size of your fist) the more the enclosure will be required for dimensional stability.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eSpool Dimensions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e3kg cardboard spool:\u003c\/span\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpool Inner Hole Diameter: \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e55±1mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpool Diameter: 250±1mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpool Width: 117.2±2mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpool Weight: 425±21.3g\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Polylite ASA - 3kg 1.75mm

$102.99 CAD

Description PolyLite™ ASA is an alternative to ABS with an improved weather resistance. Its UV resistance and excellent mechanical properties make it the perfect choice for real life applications. Difference between ASA and ABS ASA is almost exactly the same as ABS with 1 major difference and 1 minor difference:The major difference is ASA i...

Ninjatek Cheetah TPU 95A - 1.75 mm, 0.5kg

$69.99 CAD

{"id":8511323930854,"title":"Ninjatek Cheetah TPU 95A - 1.75 mm, 0.5kg","handle":"ninjatek-cheetah-tpu-95a-1-75-mm-0-5kg","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003ehe fastest and easiest-to-print flexible TPU filament available, Cheetah\u003c\/span\u003e\u003csup data-mce-fragment=\"1\"\u003e®\u003c\/sup\u003e\u003cspan data-mce-fragment=\"1\"\u003e maintains industry-leading durability and impact strength 84% greater than ABS. Cheetah is the perfect blend of speed and toughness.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 id=\"features\" class=\"wp-block-heading\"\u003eFEATURES AND BENEFITS OF CHEETAH FILAMENT\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShore hardness = 95A\u003c\/li\u003e\n\u003cli\u003ePrints at speeds greater than 60 mm\/ sec with standard ABS settings\u003c\/li\u003e\n\u003cli\u003eSignificantly greater impact strength than all widely used materials – 84% greater than ABS\u003c\/li\u003e\n\u003cli\u003eIndustry-leading toughness and durability to ensure longevity in printed parts\u003c\/li\u003e\n\u003cli\u003eAbrasion resistance 40% better than ABS and 76% better than PLA\u003c\/li\u003e\n\u003cli\u003e580% elongation capabilities improve the ability to withstand wear and tear\u003c\/li\u003e\n\u003cli\u003eChemical resistance to many materials. View\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Cheetah_CR.pdf\" target=\"_blank\" data-mce-href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Cheetah_CR.pdf\"\u003eCheetah Chemical Resistance Guide\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor more information.\u003c\/li\u003e\n\u003cli\u003eConsistent diameter and material properties providing reliable, high-quality prints\u003c\/li\u003e\n\u003cli\u003eREACH and RoHS 3 (EU 2015\/863)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\" class=\"wp-block-heading\"\u003eAPPLICATIONS\u003c\/h2\u003e\n\u003cdiv class=\"block multiple-callout align stacked-image col-3\"\u003e\n\u003cdiv class=\"block-wrap\"\u003e\n\u003cdiv class=\"callout-inner\"\u003e\n\u003cdiv class=\"callout has-icon\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003eSports\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cp\u003eCheetah is ideal for applications that need strength, flexibility and plenty of impact strength.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"callout has-icon\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003eHealthcare\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cp\u003e3D-printed organs for pre-surgery prep and custom-designed prosthetics enhance patient care.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"callout has-icon\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003eIndustrial Manufacturing\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cp\u003eTest your new designs with a 3D-printed prototype or quickly create end-use parts for your machines. \u003c\/p\u003e\n\u003ch2 class=\"wp-block-heading\" id=\"print-guidelines\"\u003ePRINT GUIDELINES\u003c\/h2\u003e\n\u003cdiv class=\"block multiple-callout align table col-3\"\u003e\n\u003cdiv class=\"block-wrap\"\u003e\n\u003cdiv class=\"callout-inner\"\u003e\n\u003cdiv class=\"callout\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003eExtruder Temperature\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cul\u003e\n\u003cli data-rich-text-format-boundary=\"true\"\u003e225°C – 250°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"callout\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003ePlatform Temperature\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cul\u003e\n\u003cli\u003eRoom temperature to 50°C\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eGlue is suggested on bed.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"callout\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003ePrint Speed\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cul\u003e\n\u003cli data-rich-text-format-boundary=\"true\"\u003eTop and bottom layers: 25-45 mm\/sec (1800-2700 mm\/min)\u003c\/li\u003e\n\u003cli data-rich-text-format-boundary=\"true\"\u003eInfill speeds: 50-80 mm\/sec (3600-4800 mm\/min)\u003c\/li\u003e\n\u003cli data-rich-text-format-boundary=\"true\"\u003eLayer 2+ use cooling fan if available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"tech-specs\" class=\"wp-block-heading\"\u003eTECH SPECS\u003c\/h2\u003e\n\u003cul class=\"list-plain\"\u003e\n\u003cli\u003e\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/SDS-Cheetah-rev0.pdf\" target=\"_blank\"\u003eCheetah Safety Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Cheetah-TDS.pdf\" target=\"_blank\"\u003eCheetah Technical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Cheetah_CR.pdf\" target=\"_blank\"\u003eCheetah Chemical Resistance Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"samples\" class=\"wp-block-heading\"\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2024-04-05T15:07:09-04:00","created_at":"2024-04-02T15:39:13-04:00","vendor":"Ninjatek","type":"3D Printing Filaments","tags":["1.75mm","3D Filament","3D Printer Filament","cheetah","Filament","Flexible 1.75mm","New","New Arrival","newfront","ninjatek","ninjatek cheetah","tpu 95a"],"price":6999,"price_min":6999,"price_max":6999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44549392957670,"title":"Midnight Black","option1":"Midnight Black","option2":null,"option3":null,"sku":"NINJA-CHEETAH-MBLACK-3DCH0117505","requires_shipping":true,"taxable":true,"featured_image":{"id":40764863643878,"product_id":8511323930854,"position":1,"created_at":"2024-04-02T16:07:26-04:00","updated_at":"2024-04-02T16:07:37-04:00","alt":null,"width":1600,"height":1600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-midnight-black-1600x1600_72216bc8-df51-4f2e-bdab-ce5f289a74a4.jpg?v=1712088457","variant_ids":[44549392957670]},"available":true,"name":"Ninjatek Cheetah TPU 95A - 1.75 mm, 0.5kg - Midnight Black","public_title":"Midnight Black","options":["Midnight Black"],"price":6999,"weight":1400,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"662345234153","featured_media":{"alt":null,"id":33394592415974,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-midnight-black-1600x1600_72216bc8-df51-4f2e-bdab-ce5f289a74a4.jpg?v=1712088457"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44549392990438,"title":"Snow White","option1":"Snow White","option2":null,"option3":null,"sku":"NINJA-CHEETAH-SNWHITE-3DCH0017505","requires_shipping":true,"taxable":true,"featured_image":{"id":40764866887910,"product_id":8511323930854,"position":3,"created_at":"2024-04-02T16:07:54-04:00","updated_at":"2024-04-02T16:07:55-04:00","alt":null,"width":1600,"height":1600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-snow-white-1600x1600_06b88a6e-5fb4-42c3-b6ee-7fb76b393dfb.jpg?v=1712088475","variant_ids":[44549392990438]},"available":true,"name":"Ninjatek Cheetah TPU 95A - 1.75 mm, 0.5kg - Snow White","public_title":"Snow White","options":["Snow White"],"price":6999,"weight":1400,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"662345234146","featured_media":{"alt":null,"id":33394595692774,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-snow-white-1600x1600_06b88a6e-5fb4-42c3-b6ee-7fb76b393dfb.jpg?v=1712088475"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-midnight-black-1600x1600_72216bc8-df51-4f2e-bdab-ce5f289a74a4.jpg?v=1712088457","\/\/www.digitmakers.ca\/cdn\/shop\/files\/swatch-midnight-black-1600x1600_7bc495ef-b9c3-4d0d-beca-9cb7563e028c.jpg?v=1712088448","\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-snow-white-1600x1600_06b88a6e-5fb4-42c3-b6ee-7fb76b393dfb.jpg?v=1712088475","\/\/www.digitmakers.ca\/cdn\/shop\/files\/swatch-snow-white-1600x1600_5f057da1-e7e3-4b97-a20f-855c904ddc89.jpg?v=1712088497"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-midnight-black-1600x1600_72216bc8-df51-4f2e-bdab-ce5f289a74a4.jpg?v=1712088457","options":["Color"],"media":[{"alt":null,"id":33394592415974,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-midnight-black-1600x1600_72216bc8-df51-4f2e-bdab-ce5f289a74a4.jpg?v=1712088457"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-midnight-black-1600x1600_72216bc8-df51-4f2e-bdab-ce5f289a74a4.jpg?v=1712088457","width":1600},{"alt":null,"id":33394587828454,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/swatch-midnight-black-1600x1600_7bc495ef-b9c3-4d0d-beca-9cb7563e028c.jpg?v=1712088448"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/swatch-midnight-black-1600x1600_7bc495ef-b9c3-4d0d-beca-9cb7563e028c.jpg?v=1712088448","width":1600},{"alt":null,"id":33394595692774,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-snow-white-1600x1600_06b88a6e-5fb4-42c3-b6ee-7fb76b393dfb.jpg?v=1712088475"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-snow-white-1600x1600_06b88a6e-5fb4-42c3-b6ee-7fb76b393dfb.jpg?v=1712088475","width":1600},{"alt":null,"id":33394599035110,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/swatch-snow-white-1600x1600_5f057da1-e7e3-4b97-a20f-855c904ddc89.jpg?v=1712088497"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/swatch-snow-white-1600x1600_5f057da1-e7e3-4b97-a20f-855c904ddc89.jpg?v=1712088497","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003ehe fastest and easiest-to-print flexible TPU filament available, Cheetah\u003c\/span\u003e\u003csup data-mce-fragment=\"1\"\u003e®\u003c\/sup\u003e\u003cspan data-mce-fragment=\"1\"\u003e maintains industry-leading durability and impact strength 84% greater than ABS. Cheetah is the perfect blend of speed and toughness.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 id=\"features\" class=\"wp-block-heading\"\u003eFEATURES AND BENEFITS OF CHEETAH FILAMENT\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShore hardness = 95A\u003c\/li\u003e\n\u003cli\u003ePrints at speeds greater than 60 mm\/ sec with standard ABS settings\u003c\/li\u003e\n\u003cli\u003eSignificantly greater impact strength than all widely used materials – 84% greater than ABS\u003c\/li\u003e\n\u003cli\u003eIndustry-leading toughness and durability to ensure longevity in printed parts\u003c\/li\u003e\n\u003cli\u003eAbrasion resistance 40% better than ABS and 76% better than PLA\u003c\/li\u003e\n\u003cli\u003e580% elongation capabilities improve the ability to withstand wear and tear\u003c\/li\u003e\n\u003cli\u003eChemical resistance to many materials. View\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Cheetah_CR.pdf\" target=\"_blank\" data-mce-href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Cheetah_CR.pdf\"\u003eCheetah Chemical Resistance Guide\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor more information.\u003c\/li\u003e\n\u003cli\u003eConsistent diameter and material properties providing reliable, high-quality prints\u003c\/li\u003e\n\u003cli\u003eREACH and RoHS 3 (EU 2015\/863)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"applications\" class=\"wp-block-heading\"\u003eAPPLICATIONS\u003c\/h2\u003e\n\u003cdiv class=\"block multiple-callout align stacked-image col-3\"\u003e\n\u003cdiv class=\"block-wrap\"\u003e\n\u003cdiv class=\"callout-inner\"\u003e\n\u003cdiv class=\"callout has-icon\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003eSports\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cp\u003eCheetah is ideal for applications that need strength, flexibility and plenty of impact strength.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"callout has-icon\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003eHealthcare\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cp\u003e3D-printed organs for pre-surgery prep and custom-designed prosthetics enhance patient care.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"callout has-icon\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003eIndustrial Manufacturing\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cp\u003eTest your new designs with a 3D-printed prototype or quickly create end-use parts for your machines. \u003c\/p\u003e\n\u003ch2 class=\"wp-block-heading\" id=\"print-guidelines\"\u003ePRINT GUIDELINES\u003c\/h2\u003e\n\u003cdiv class=\"block multiple-callout align table col-3\"\u003e\n\u003cdiv class=\"block-wrap\"\u003e\n\u003cdiv class=\"callout-inner\"\u003e\n\u003cdiv class=\"callout\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003eExtruder Temperature\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cul\u003e\n\u003cli data-rich-text-format-boundary=\"true\"\u003e225°C – 250°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"callout\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003ePlatform Temperature\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cul\u003e\n\u003cli\u003eRoom temperature to 50°C\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eGlue is suggested on bed.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"callout\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003ePrint Speed\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cul\u003e\n\u003cli data-rich-text-format-boundary=\"true\"\u003eTop and bottom layers: 25-45 mm\/sec (1800-2700 mm\/min)\u003c\/li\u003e\n\u003cli data-rich-text-format-boundary=\"true\"\u003eInfill speeds: 50-80 mm\/sec (3600-4800 mm\/min)\u003c\/li\u003e\n\u003cli data-rich-text-format-boundary=\"true\"\u003eLayer 2+ use cooling fan if available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"tech-specs\" class=\"wp-block-heading\"\u003eTECH SPECS\u003c\/h2\u003e\n\u003cul class=\"list-plain\"\u003e\n\u003cli\u003e\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/SDS-Cheetah-rev0.pdf\" target=\"_blank\"\u003eCheetah Safety Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Cheetah-TDS.pdf\" target=\"_blank\"\u003eCheetah Technical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Cheetah_CR.pdf\" target=\"_blank\"\u003eCheetah Chemical Resistance Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"samples\" class=\"wp-block-heading\"\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Ninjatek Cheetah TPU 95A - 1.75 mm, 0.5kg

$69.99 CAD

he fastest and easiest-to-print flexible TPU filament available, Cheetah® maintains industry-leading durability and impact strength 84% greater than ABS. Cheetah is the perfect blend of speed and toughness. FEATURES AND BENEFITS OF CHEETAH FILAMENT Shore hardness = 95A Prints at speeds greater than 60 mm/ sec with standard ABS settings Signific...

Ninjatek Ninjaflex Edge TPE 83A - 1.75 mm, 0.5kg

$79.99 CAD

{"id":8511305253094,"title":"Ninjatek Ninjaflex Edge TPE 83A - 1.75 mm, 0.5kg","handle":"ninjatek-ninjaflex-edge-tpe-83a-1-75-mm-0-5kg","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eNinjaFlex\u003c\/span\u003e\u003csup data-mce-fragment=\"1\"\u003e®\u003c\/sup\u003e\u003cspan data-mce-fragment=\"1\"\u003e Edge offers the best of both worlds: NinjaFlex flexibility and NinjaTek’s innovative printability. NinjaFlex Edge provides incredible rebound – unlike anything in the market, and unparalleled print speeds for an 83A durometer.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"wp-block-heading\" id=\"features\"\u003eFEATURES AND BENEFITS OF NINJAFLEX FILAMENT\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShore Hardness = 83A\u003c\/li\u003e\n\u003cli\u003eTruly flexible (no fill or layer manipulation required to achieve performance)\u003c\/li\u003e\n\u003cli\u003eFlexibility allows for repeated movement and impact without wear or cracking\u003c\/li\u003e\n\u003cli\u003eProprietary low-friction exterior allows for smooth feeding\u003c\/li\u003e\n\u003cli\u003eUnique rebound gives material excellent bounce and recoil\u003c\/li\u003e\n\u003cli\u003eHigh grip lends itself to robotic grippers and tread\u003c\/li\u003e\n\u003cli\u003eConsistent diameter and material properties providing reliable, high-quality prints\u003c\/li\u003e\n\u003cli\u003eChemical resistance to many materials. View the \u003ca href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Edge_CR.pdf\" rel=\"noreferrer noopener\" data-mce-href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Edge_CR.pdf\" target=\"_blank\"\u003eNinjaFlex Edge Chemical Resistance Guide\u003c\/a\u003e for more information.\u003c\/li\u003e\n\u003cli\u003eREACH and RoHS 3 (EU 2015\/863)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"block multiple-callout align stacked-image col-3\"\u003e\n\u003cdiv class=\"block-wrap\"\u003e\n\u003cdiv class=\"callout-inner\"\u003e\n\u003cdiv class=\"callout has-icon\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003ch2 id=\"print-guidelines\" class=\"wp-block-heading\" data-mce-fragment=\"1\"\u003ePRINT GUIDELINES\u003c\/h2\u003e\n\u003cdiv class=\"block multiple-callout align table col-3\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"block-wrap\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"callout-inner\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"callout\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"content\" data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eExtruder Temperature\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\" data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-rich-text-format-boundary=\"true\" data-mce-fragment=\"1\"\u003e225°C – 250°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"callout\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"content\" data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003ePlatform Temperature\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\" data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRoom temperature to 50°C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eGlue is suggested on bed.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"callout\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"content\" data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003ePrint Speed\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\" data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-rich-text-format-boundary=\"true\" data-mce-fragment=\"1\"\u003eTop and bottom layers: 20-30 mm\/sec (1200-1800 mm\/min)\u003c\/li\u003e\n\u003cli data-rich-text-format-boundary=\"true\" data-mce-fragment=\"1\"\u003eInfill speeds:30-50 mm\/sec (1800-3000 mm\/min)\u003c\/li\u003e\n\u003cli data-rich-text-format-boundary=\"true\" data-mce-fragment=\"1\"\u003eLayer 2+ use cooling fan if available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"wp-block-heading\" id=\"tech-specs\"\u003eTECH SPECS\u003c\/h2\u003e\n\u003cul class=\"list-plain\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Edge-TDS.pdf\" rel=\"noreferrer noopener\" data-mce-href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Edge-TDS.pdf\" target=\"_blank\"\u003eNinjaFlex Edge Technical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Edge_CR.pdf\" rel=\"noreferrer noopener\" data-mce-href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Edge_CR.pdf\" target=\"_blank\"\u003eNinjaFlex Edge Chemical Resistance Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/NinjaFlex_Edge_SDS_NA.pdf\" rel=\"noreferrer noopener\" data-mce-href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/NinjaFlex_Edge_SDS_NA.pdf\" target=\"_blank\"\u003eNinfaFlex Edge SDS\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003ch2 id=\"applications\" class=\"wp-block-heading\"\u003eAPPLICATIONS\u003c\/h2\u003e\n\u003cdiv class=\"block multiple-callout align stacked-image col-3\"\u003e\n\u003cdiv class=\"block-wrap\"\u003e\n\u003cdiv class=\"callout-inner\"\u003e\n\u003cdiv class=\"callout has-icon\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003eSports\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cp\u003eFrom sneaker insoles to helmet inserts, NinjaFlex can protect athletes with its vibration dampening properties.\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/16-9_sports01.jpg?v=1712085290\" width=\"498\" height=\"280\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"callout has-icon\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003eHealthcare\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cp\u003eNinjaFlex is strong and flexible for applications like prosthetics and realistic organ prototypes.\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/16-9_medical01.jpg?v=1712085317\" width=\"503\" height=\"283\"\u003e\u003c\/p\u003e\n\u003ca class=\"btn link\" href=\"https:\/\/ninjatek.com\/learn\/3d-printing-by-industry\/healthcare\/\" data-mce-href=\"https:\/\/ninjatek.com\/learn\/3d-printing-by-industry\/healthcare\/\" target=\"_self\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"callout has-icon\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003eIndustrial Manufacturing\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cp\u003eTest your new designs with a 3D-printed prototype or quickly create end-use parts for your equipment.\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/16-9_manufacturing01.jpg?v=1712085358\" alt=\"\" width=\"503\" height=\"283\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/16-9_manufacturing01.jpg?v=1712085358\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2024-04-05T14:52:27-04:00","created_at":"2024-04-02T15:21:50-04:00","vendor":"Ninjatek","type":"3D Printing Filaments","tags":["1.75mm","3D Filament","3D Printer Filament","edge tpe","Filament","Flexible 1.75mm","New","New Arrival","newfront","ninjaflex edge","tpe 83a","tpu 85a"],"price":7999,"price_min":7999,"price_max":7999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44549270339814,"title":"Midnight Black","option1":"Midnight Black","option2":null,"option3":null,"sku":"NINJA-EDGE-MBLACK-3DNE0117505","requires_shipping":true,"taxable":true,"featured_image":{"id":40764531048678,"product_id":8511305253094,"position":1,"created_at":"2024-04-02T15:31:07-04:00","updated_at":"2024-04-02T15:31:08-04:00","alt":null,"width":1600,"height":1600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-midnight-black-1600x1600_d704b9c3-012c-4159-a3df-207f6d88b990.jpg?v=1712086268","variant_ids":[44549270339814]},"available":true,"name":"Ninjatek Ninjaflex Edge TPE 83A - 1.75 mm, 0.5kg - Midnight Black","public_title":"Midnight Black","options":["Midnight Black"],"price":7999,"weight":1400,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"662345271462","featured_media":{"alt":null,"id":33394257789158,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-midnight-black-1600x1600_d704b9c3-012c-4159-a3df-207f6d88b990.jpg?v=1712086268"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44549270372582,"title":"Snow White","option1":"Snow White","option2":null,"option3":null,"sku":"NINJA-EDGE-SNWHITE-3DNE0017505","requires_shipping":true,"taxable":true,"featured_image":{"id":40764533047526,"product_id":8511305253094,"position":3,"created_at":"2024-04-02T15:31:23-04:00","updated_at":"2024-04-02T15:31:24-04:00","alt":null,"width":1600,"height":1600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-snow-white-1600x1600_50e05e05-08fe-4973-b7b4-b7fbbaac7619.jpg?v=1712086284","variant_ids":[44549270372582]},"available":true,"name":"Ninjatek Ninjaflex Edge TPE 83A - 1.75 mm, 0.5kg - Snow White","public_title":"Snow White","options":["Snow White"],"price":7999,"weight":1400,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"662345271400","featured_media":{"alt":null,"id":33394259820774,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-snow-white-1600x1600_50e05e05-08fe-4973-b7b4-b7fbbaac7619.jpg?v=1712086284"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-midnight-black-1600x1600_d704b9c3-012c-4159-a3df-207f6d88b990.jpg?v=1712086268","\/\/www.digitmakers.ca\/cdn\/shop\/files\/swatch-midnight-black-1600x1600_aa51480d-7f54-4882-8bec-90b641a9f34e.jpg?v=1712086275","\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-snow-white-1600x1600_50e05e05-08fe-4973-b7b4-b7fbbaac7619.jpg?v=1712086284","\/\/www.digitmakers.ca\/cdn\/shop\/files\/swatch-snow-white-1600x1600_0f0d3af6-3653-4241-9ebb-428209be46bd.jpg?v=1712086289"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-midnight-black-1600x1600_d704b9c3-012c-4159-a3df-207f6d88b990.jpg?v=1712086268","options":["Color"],"media":[{"alt":null,"id":33394257789158,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-midnight-black-1600x1600_d704b9c3-012c-4159-a3df-207f6d88b990.jpg?v=1712086268"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-midnight-black-1600x1600_d704b9c3-012c-4159-a3df-207f6d88b990.jpg?v=1712086268","width":1600},{"alt":null,"id":33394258706662,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/swatch-midnight-black-1600x1600_aa51480d-7f54-4882-8bec-90b641a9f34e.jpg?v=1712086275"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/swatch-midnight-black-1600x1600_aa51480d-7f54-4882-8bec-90b641a9f34e.jpg?v=1712086275","width":1600},{"alt":null,"id":33394259820774,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-snow-white-1600x1600_50e05e05-08fe-4973-b7b4-b7fbbaac7619.jpg?v=1712086284"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/spool-ninjahead-snow-white-1600x1600_50e05e05-08fe-4973-b7b4-b7fbbaac7619.jpg?v=1712086284","width":1600},{"alt":null,"id":33394260607206,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/swatch-snow-white-1600x1600_0f0d3af6-3653-4241-9ebb-428209be46bd.jpg?v=1712086289"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/swatch-snow-white-1600x1600_0f0d3af6-3653-4241-9ebb-428209be46bd.jpg?v=1712086289","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eNinjaFlex\u003c\/span\u003e\u003csup data-mce-fragment=\"1\"\u003e®\u003c\/sup\u003e\u003cspan data-mce-fragment=\"1\"\u003e Edge offers the best of both worlds: NinjaFlex flexibility and NinjaTek’s innovative printability. NinjaFlex Edge provides incredible rebound – unlike anything in the market, and unparalleled print speeds for an 83A durometer.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"wp-block-heading\" id=\"features\"\u003eFEATURES AND BENEFITS OF NINJAFLEX FILAMENT\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShore Hardness = 83A\u003c\/li\u003e\n\u003cli\u003eTruly flexible (no fill or layer manipulation required to achieve performance)\u003c\/li\u003e\n\u003cli\u003eFlexibility allows for repeated movement and impact without wear or cracking\u003c\/li\u003e\n\u003cli\u003eProprietary low-friction exterior allows for smooth feeding\u003c\/li\u003e\n\u003cli\u003eUnique rebound gives material excellent bounce and recoil\u003c\/li\u003e\n\u003cli\u003eHigh grip lends itself to robotic grippers and tread\u003c\/li\u003e\n\u003cli\u003eConsistent diameter and material properties providing reliable, high-quality prints\u003c\/li\u003e\n\u003cli\u003eChemical resistance to many materials. View the \u003ca href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Edge_CR.pdf\" rel=\"noreferrer noopener\" data-mce-href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Edge_CR.pdf\" target=\"_blank\"\u003eNinjaFlex Edge Chemical Resistance Guide\u003c\/a\u003e for more information.\u003c\/li\u003e\n\u003cli\u003eREACH and RoHS 3 (EU 2015\/863)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"block multiple-callout align stacked-image col-3\"\u003e\n\u003cdiv class=\"block-wrap\"\u003e\n\u003cdiv class=\"callout-inner\"\u003e\n\u003cdiv class=\"callout has-icon\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003ch2 id=\"print-guidelines\" class=\"wp-block-heading\" data-mce-fragment=\"1\"\u003ePRINT GUIDELINES\u003c\/h2\u003e\n\u003cdiv class=\"block multiple-callout align table col-3\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"block-wrap\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"callout-inner\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"callout\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"content\" data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eExtruder Temperature\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\" data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-rich-text-format-boundary=\"true\" data-mce-fragment=\"1\"\u003e225°C – 250°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"callout\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"content\" data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003ePlatform Temperature\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\" data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRoom temperature to 50°C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eGlue is suggested on bed.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"callout\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"content\" data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003ePrint Speed\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\" data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-rich-text-format-boundary=\"true\" data-mce-fragment=\"1\"\u003eTop and bottom layers: 20-30 mm\/sec (1200-1800 mm\/min)\u003c\/li\u003e\n\u003cli data-rich-text-format-boundary=\"true\" data-mce-fragment=\"1\"\u003eInfill speeds:30-50 mm\/sec (1800-3000 mm\/min)\u003c\/li\u003e\n\u003cli data-rich-text-format-boundary=\"true\" data-mce-fragment=\"1\"\u003eLayer 2+ use cooling fan if available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"wp-block-heading\" id=\"tech-specs\"\u003eTECH SPECS\u003c\/h2\u003e\n\u003cul class=\"list-plain\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Edge-TDS.pdf\" rel=\"noreferrer noopener\" data-mce-href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Edge-TDS.pdf\" target=\"_blank\"\u003eNinjaFlex Edge Technical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Edge_CR.pdf\" rel=\"noreferrer noopener\" data-mce-href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/Edge_CR.pdf\" target=\"_blank\"\u003eNinjaFlex Edge Chemical Resistance Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/NinjaFlex_Edge_SDS_NA.pdf\" rel=\"noreferrer noopener\" data-mce-href=\"https:\/\/ninjatek.com\/wp-content\/uploads\/NinjaFlex_Edge_SDS_NA.pdf\" target=\"_blank\"\u003eNinfaFlex Edge SDS\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003ch2 id=\"applications\" class=\"wp-block-heading\"\u003eAPPLICATIONS\u003c\/h2\u003e\n\u003cdiv class=\"block multiple-callout align stacked-image col-3\"\u003e\n\u003cdiv class=\"block-wrap\"\u003e\n\u003cdiv class=\"callout-inner\"\u003e\n\u003cdiv class=\"callout has-icon\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003eSports\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cp\u003eFrom sneaker insoles to helmet inserts, NinjaFlex can protect athletes with its vibration dampening properties.\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/16-9_sports01.jpg?v=1712085290\" width=\"498\" height=\"280\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"callout has-icon\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003eHealthcare\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cp\u003eNinjaFlex is strong and flexible for applications like prosthetics and realistic organ prototypes.\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/16-9_medical01.jpg?v=1712085317\" width=\"503\" height=\"283\"\u003e\u003c\/p\u003e\n\u003ca class=\"btn link\" href=\"https:\/\/ninjatek.com\/learn\/3d-printing-by-industry\/healthcare\/\" data-mce-href=\"https:\/\/ninjatek.com\/learn\/3d-printing-by-industry\/healthcare\/\" target=\"_self\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"callout has-icon\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003ch3\u003eIndustrial Manufacturing\u003c\/h3\u003e\n\u003cdiv class=\"description-wrap cf\"\u003e\n\u003cp\u003eTest your new designs with a 3D-printed prototype or quickly create end-use parts for your equipment.\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/16-9_manufacturing01.jpg?v=1712085358\" alt=\"\" width=\"503\" height=\"283\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/16-9_manufacturing01.jpg?v=1712085358\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Ninjatek Ninjaflex Edge TPE 83A - 1.75 mm, 0.5kg

$79.99 CAD

NinjaFlex® Edge offers the best of both worlds: NinjaFlex flexibility and NinjaTek’s innovative printability. NinjaFlex Edge provides incredible rebound – unlike anything in the market, and unparalleled print speeds for an 83A durometer. FEATURES AND BENEFITS OF NINJAFLEX FILAMENT Shore Hardness = 83A Truly flexible (no fill or layer manipulati...