Jack D.
Great job guys, keep up the great work , thank you for everything.
Mohammad T.
The quality of this brand is really low. I find it far more brittle than the other brants. Also, in the middle of one of my prints, the filament snapped, and the print failed. It was some sort of tanglement that I have never seen before. I wouldn't buy this brand again. The only reason I bought it was that you were out of black eSun.
William
Easy to use nice print the with no clog
William
Easy to use, easy to print with
Rachel
Arrive on time colors are what I expected can't wait to use them
Darren G.
After an initial bad experience with some rolls of filament diameter being quite out of spec, so much so the filament jammed in the bowden tube, support reached out to me to let me know they have corrected the issue. After replacing the filament colours in question I have not have any further issues quality wise, which is great because I do love the variety of colours and price point and other than the initial issues the filament prints pretty well.
Darren G.
Would not buy again regardless of price. Love the wide selection of colours but either I got some bad rolls or there is no QC on this filament brand, I've experienced jamming and under extrusion so much I don't even bother trying to run it on any printer with a revo nozzle. Despite repeated calibrations for flow on all my printers, I get under and over extrusion on the same filament roll. Had the gold jam in the bowden tube, when I managed to finally get it out the filament was visually fatter than the rest of the line and when measured it was 2.24 instead of the 1.75 it is supposed to be. The last jam on my AD5X printer had the filament, different colour, measuring 2.12 I believe, it was definitely over 2. It did seem to measure more consistently at 1.73, not great, but at least at that measurement, it's not jamming in the printer. I will be using up what I have but I definitely will not buy this brand again as I cannot trust it to not jam up and waste more of my money.
MORTON B.
I have enjoyed shopping in person at your store.
David L.
A lot of printing problem with it, it seem likle a bad batch of pla, because the blue one worked great,
MICHAEL P.
great product great company
Kim N.
My order arrived very quickly. Great price and great quality.
Usman A.
What can I say, a cheap, local supplier for black PLA. It prints well with no print modifications required. Printed on all of my different print plates and has a nice sheen finish. Not too glossy, not to dull. I like it! ^_^
Usman A.
It prints nicely which has been a concern since all my 3D printing friends advice the hardest colour to print is white. The cooler tone is nice since it gives the prints a cleaner look.
Christina P.
The pla is brittle compared to other brand named filaments, got this on sale can't complain.
Darwin A.
Excellent filament! Price point and ease of use is awesome! Definitely purchase more in the future.
Christina P.
Its more brittle compared to polyterra but for the price its great, prints come out fine. Needs a higher print temp than oghers.
Lino D.
Was Able to achieve good consistent print quality at 100mm/sec feed rate, by just raising the print temp to 230'C, with bed temp of 60'C, and box temp of 30'C, using Bondtech CHT MK8 0.6mm Nozzle.
Lino D.
For the price, this is some of the best PLA I have ever used. I have gone thru 5 roles so far, and I have found that the roles are consistently very dry. I put them in my dryer and after about an hour the dryer reads 20% relative moisture. So there literally ready to use out of the bag with little to no bubbling evident. Since I'm making relatively large prints, like the core sections for my new race car wing, which will be 6 feet long when assembled and fiber glassed over. I needed to print around 100 mm/s to keep the print times reasonable and had no issues with this PLA. I just moved the print temp up to 230'C and it worked perfectly...
MORTON B.
Problem free, well priced, good value.
James O.
Great value works 100% in AMS
Patrick F.
The filament is good
MORTON B.
Good value, good price, works well.
Tam T.
The one I received was extremely tangled which caused a few failures. Other rolls in different colours seemed to be rolled much neater. Possibly just a lemon.
Customer
Great value for money, my goto standard for prototyping.
Lance A.
Received but not used. Just stocking up.
Shane R.
Great flow no issues at all.
Adam H.
Not the same colour as before since they changed spools. The Red is more lighter and appears matte on the spool and very dry to the touch, prints fine but the color is the not the same as before.
Robert
Decent filament, pretty neat rolls for 'budget' price, Ive used gray and black previously on a modified Ender 3 Pro
Dieter
I usually buy pla silver from d3d but they just have change the Ingredients as they a bit darker than before.
Dieter
Great filament but might rethink buying from digitmakers as filament was $24 and they increased the price to $33a reel.
cole N.
trusty pla super rigid somewhat translucent, in thin layers I' ve used this stuff before and i love that its strong and sandable.
Dieter
Print quality was great but the reel was mislabel. 5 reels were silver filament yet the last reel was marked silver but printed silk silver
Gerald R.
Excellent price and very fast delivery.
Highly recommend for purchasses
Nick I.
Something in the filament makes the extruder jump, The temp is as high as I can go, but every little while it seems like its either to fat in places or there are impurities in it. Won't be getting this kind again
stewart h.
Received this filament free with curbside pickup of a new printer. I am new to 3D printing but have had no issues. The filament prints nice with no strings. Would definitely buy again.
Maria M.
Excellent product fast shipping
Maria M.
Excellent product fast shipping
Maria M.
Excellent product fast shipping
Maria M.
Excellent product fast shipping
Maria M.
Excellent product fast shipping
Maria M.
Excellent product fast shipping
cole N.
this was the first filament i used with my ender 5 I haven't used anything other than the supplied creality filament, it sands nicely and prints off small edges repeatably it hasnt been super susceptible to moitsure from what i can tell and has been giving pretty cool results with my 1mm nozzle
Phil B.
I've been through a couple rolls of this...It's surprisingly good. Prints nice on my ASX1, which is pretty well tuned. I'll buy more.
Leo B.
Great filament, not one problem printing on my tronxy 2 pro... Amazing results for all colors... No stringing or breakage.... Will buy again... It's my goto pla filament...
Jonathan S.
Great filament. It's not silver. It's grey. Really enjoying this roll.
Mario L.
Excellent filament for miniature scenery and R/C parts!
Daveanand S.
Prints ok enough but spooled on like nobody gaf. Knots and tangles. Had to rewind two spools by hand! Only reason it got 3 stars is because its cheap.
Matthew M.
GREAT white filament. Works great in all my Prusa printers , I will buy more for sure shortly
Eric
I had posted a negative review here about this filament, I was getting really poor results. It was my printer, I had upgraded to a new hotend and kept the fan that came with it. That was the first issue with my printer, the plastic was semi melting inside the heatsink, making retractions jam. I put my old fan back on and it partially solved my issue.
My second issue was a partial clog inside my nozzle, making me need to use extreme heat to extrude it at half the speed.
This filament is great once I solved my printer issue. I look forward to the next sale, definitely going to stock up.
MICHAEL D.
Great filament at a great price
brian m.
Very nice color, no discrepancy. Highly recommend it if you are looking for low cost filament.
Ken
I guess the one thing I'm not 100% comfortable with is the inconsistency of colour. The barrel of this piece was printed vertically and it's got those odd banding stripes. I've seen this with most of the items I've printed with this. Thankfully I'm painting everything I have to print, but I'm sure there are others that would expect to print and use right off the printer.
MICHAEL D.
This Jawa Ion Blaster was printed using this filament. I absolutely love it.
MICHAEL D.
Having great success with this filament. I love it
Dan M.
Picked up this clear PLA because the price was right, just used it for parts that ended up painted anyway but it was surprisingly clear in single wall vase mode!
MICHAEL D.
Im very happy with this filament. I've used it before and its been nothing but great prints.
Taylor S.
This filament is great. Amazing price and prints really well. The surface finish seems to vary (perhaps based on the print temperature). Sometimes it’s glossy and sometimes it’s more matte. Overall, a fantastic product for an even better price.
David R.
Excellent finish. D3D has always been a go to filament for myself. Lower price was great for testing but always have good print quality
David R.
Prints Great As Usual.
David R.
Again, always great prints from this PLA ... always great service from DigitMakers.ca
David R.
Great PLA, always turned out great prints.
David R.
Made these scaled Jack stands for my neighbors rc collection. This PLA has always turned out great prints for me.
Nelson L.
Print well at 225C on my Geeetech i3W.
Donnie R.
Love you green colour best green PLA I've used.
Kim B.
Prints well, Great price. Colors are not as glossy as premium brands but I knew that before buying.
Peter S.
Prints beautifully, they say this stuff is a prototyping but it should say high end prototyping because the quality is almost that of a premium brand.
Jacques H.
Je suis satisfait de tout ce que j'ai acheté .
Bryan H.
Prints well on 210C. Solid color. Great stuff for the price.
John G.
Prints very well. nice and flexible, would have liked a darker green next time.
Matt P.
Filament is pretty damn great! I'm still fairly new to 3d printing and have a few final tweeks to my settings and a little fine tuning to finish Dialing my beast of an i3. Filament has great, vibrant color, easy to manipulate and easy to work with. At the price it was I'm laughing!
David G.
I bought 1 reel of black PLA. I have printed very few items to date on my new Anet A8 printer and so far, the printer performs better than I had expected. I have included an image of a test cube during with which I was checking the PLA out at 205 Celsius. Looks pretty good. Wish I could be more detailed, but it is early days with the printer and with me. From price point of view, filament was an excellent bargain
Bambu Lab Filament PLA Basic (avec bobine réutilisable Bambu) 1,75 mm - 1 kg (Divers coloris)
$22.99
