Vision Miner - Adhésif Nano Polymère - Diverses Tailles

Great glue.

Works extremely well! It solved common warping issues with PETG, ASA and PC filaments. keep in mind.. some filaments/designs will refuse to *not warp* and may still break, just not at the bottom portion where the glue is applied (it may delaminate at higher layers). I ended up breaking my hotend because a large ASA part decided to crack midway and caused a collision.

Extremely strong with ASA on smooth PEI, works well with PETG as well.

Excellent for all type of plastics !

Look how strong this stuff is. As the plastic warped, it pulled up the magnetic bed up and would not let go. Amazing. I had to use clips to hold down the magnetic bed to make this print successful.

This stuff is the best bed adhesive I've ever used. Keeps ABS firmly bonded to my PEI. Sometimes hard to remove the parts even after the bed has cooled.

I normally don't leave reviews, but I feel so strongly about this product, and after seeing the mixed reviews, I felt I had no choice but to chime in. This stuff is amazing. It *actually* works. I print with a lot of advanced filaments (ABS, ASA, Nylon, PC, etc). I've tried different build plate materials - glass, PEI, textured PEI, buildtak, garolite, I've tried magic concoctions (glass + elmers liquid glue, glue sticks, various types of magigoo), and none of them are particularly great with 'difficult' filaments. In particular, I've always personally found that my experience with magigoo as a product was kind of like throwing money in the wind, in my experience. I was therefore not expecting this stuff to work; and yet, it does. My go-to is now Textured PEI plate either stand-alone or with this nano coating added, or Garolite, full stop. I had less than zero expectations for yet another mystery potion, but I'm here to say - this one really, really works, and I have yet to bump into a material that is incompatible with it. Plus, it cleans up stupidly easy!!!! At the end of the day, people need to realize that no magic potion is going to prevent the torquing forces on unenclosed printers or unheated build machines. I've got an enclosed bed, but it's not a heated space, and this stuff is hands down a lifesaver. Despite its cost, it's worth it. I've bought multiple bottles, and I'll buy more as I need them. A++++++. Of course, as with anything, this simply represents my experience / opinion, and YMMV. Cheers.

A little bit pricey, so I keep it for my most expensive prints. But so far, it works really well.

I had high hopes for this adhesive as I print quite a few smaller items. I was previously using glue stick, which worked extremely well, but I wanted something cleaner so thought I would give this adhesive a try. I cleaned my PEI bed and applied the adhesive like the video said. My first print using PLA+ had edges warping and peeling up off the bed. Applied another coat. Same thing happened. All my settings stayed the same as when I printed them using glue stick on the bed, which worked perfectly. Regretting this purchase now.