{"id":1098366615588,"title":"Dimafix Glue (90 ml)","handle":"dimafix-glue","description":"\u003cp\u003e\u003cstrong\u003eDimafix Pen\u003c\/strong\u003e\u003cspan\u003e (90ml) is a new product based on the Dimafix Spray formula. The Dimafix Pen maintains the same adhesion properties of Dimafix Spray format but in dabber liquid bottle format. It has been known to last as much as 100 uses (your mileage may vary depending on bed size). \u003c\/span\u003e\u003cspan\u003eIt is water soluble so it is easy to clean. It works on a wider range of temperature than the Dimafix Spray, so it allows the self detaching effect of the piece sooner. This product does not contain any gas, is environmentally friendly. You can also notice it great smell during the print. After you use it, close it and hold it properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eUsage:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShake it the bottle a few seconds before applying.\u003c\/li\u003e\n\u003cli\u003eMake sure the base is cold\u003c\/li\u003e\n\u003cli\u003eApply it over the base\u003c\/li\u003e\n\u003cli\u003eWait a few seconds for the surface to dry and heat the bed\u003c\/li\u003e\n\u003cli\u003eConsult the table with recommended temperatures for printing each Dimafix formula\u003c\/li\u003e\n\u003cli\u003eThe product begins to work above 65ºC\/150ºF\u003c\/li\u003e\n\u003cli\u003eWhile the bed keeps over 85ºC \/ 185ºF the pieces will remain stuck on it\u003c\/li\u003e\n\u003cli\u003eIn case of incident during printing try not to remove the piece. If the piece has not taking off yet, when bed will be heated again the piece will adhere tightly and maybe you could recover your work\u003c\/li\u003e\n\u003cli\u003eAfter printing finished the piece will be easily detached (below 50ºC\/122ºC)\u003c\/li\u003e\n\u003cli\u003eWait for the bed to cool down before remove the piece\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-01-29T12:24:46-05:00","created_at":"2019-01-18T11:55:17-05:00","vendor":"Dimafix","type":"Parts","tags":["3D printer","accessories","Adhesive","Adhesive Pen","build plate","dima","dimafix","Glue","lube","new-arrivals"],"price":1900,"price_min":1900,"price_max":1900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":10039574724644,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DIM-GLU-90ML","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dimafix Glue (90 ml)","public_title":null,"options":["Default Title"],"price":1900,"weight":1000,"compare_at_price":null,"inventory_quantity":53,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8436556020025","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/Dimafix-Glue_545c86cf-31cd-45d0-9c2c-8b5532ee7c7f.jpg?v=1594465723"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Dimafix-Glue_545c86cf-31cd-45d0-9c2c-8b5532ee7c7f.jpg?v=1594465723","options":["Title"],"media":[{"alt":"Dimafix Glue (90 ml) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":1319430062211,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Dimafix-Glue_545c86cf-31cd-45d0-9c2c-8b5532ee7c7f.jpg?v=1594465723"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Dimafix-Glue_545c86cf-31cd-45d0-9c2c-8b5532ee7c7f.jpg?v=1594465723","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eDimafix Pen\u003c\/strong\u003e\u003cspan\u003e (90ml) is a new product based on the Dimafix Spray formula. The Dimafix Pen maintains the same adhesion properties of Dimafix Spray format but in dabber liquid bottle format. It has been known to last as much as 100 uses (your mileage may vary depending on bed size). \u003c\/span\u003e\u003cspan\u003eIt is water soluble so it is easy to clean. It works on a wider range of temperature than the Dimafix Spray, so it allows the self detaching effect of the piece sooner. This product does not contain any gas, is environmentally friendly. You can also notice it great smell during the print. After you use it, close it and hold it properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eUsage:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShake it the bottle a few seconds before applying.\u003c\/li\u003e\n\u003cli\u003eMake sure the base is cold\u003c\/li\u003e\n\u003cli\u003eApply it over the base\u003c\/li\u003e\n\u003cli\u003eWait a few seconds for the surface to dry and heat the bed\u003c\/li\u003e\n\u003cli\u003eConsult the table with recommended temperatures for printing each Dimafix formula\u003c\/li\u003e\n\u003cli\u003eThe product begins to work above 65ºC\/150ºF\u003c\/li\u003e\n\u003cli\u003eWhile the bed keeps over 85ºC \/ 185ºF the pieces will remain stuck on it\u003c\/li\u003e\n\u003cli\u003eIn case of incident during printing try not to remove the piece. If the piece has not taking off yet, when bed will be heated again the piece will adhere tightly and maybe you could recover your work\u003c\/li\u003e\n\u003cli\u003eAfter printing finished the piece will be easily detached (below 50ºC\/122ºC)\u003c\/li\u003e\n\u003cli\u003eWait for the bed to cool down before remove the piece\u003c\/li\u003e\n\u003c\/ul\u003e"}
Dimafix Glue (90 ml)
Get a free quotation for the product of your interest today. Choose from a wide range of 3D Printers , 3D Scanners, 3D Printing Filaments , 3D Resin & 3D Printing parts today ! Contact us today !
Contact us here!
We match all competitors pricing!
You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you're getting honest value for your money.
Price match for retail store
We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor's store or website (including shipping, handling and fees, if applicable within Canada)
Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.
Price match for online only website
If you find an identical item for less at a Canadian online only website, we will match their price (including shipping, handling and fees, if applicable).
How to price match in-store:
When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor's website.
How to price match on DigitMakers.ca
Please Email : Sales@digitmakers.ca
Please make sure you have the following information before contacting us so that we can assist you as quickly as possible:
- Your full name and phone number
- The complete URL (web address) of product page on the competitor's website (Canada Only Accepted)
- Details of the product name, brand and model
- Details of the price difference (including shipping, handling and other fees, if applicable)
Our goal is to provide everyday low prices on all of our Items
Related Products
{"id":6551748837538,"title":"eSun eSpool - 1kg Reusable Spool for eSun Refilament","handle":"esun-espool-1kg-reusable-spool-for-esun-refilament","description":"\u003cp data-mce-fragment=\"1\" style=\"text-align: center;\"\u003e\u003cstrong\u003eeSUN eSpool is only compatible for the \u003ca href=\"https:\/\/www.digitmakers.ca\/search?type=product\u0026amp;q=refilament\"\u003eeSUN Refilament Series\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith the growing popularity of 3D printing technology, the usage of 3D printing filaments has also increased. The filaments used in FDM 3D printing are mostly spooled, which occupies space and weight. To protect our environment, the detachable and reusable eSpool was designed.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eAdvantages\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUses transparent polycarbonate for high strength and toughness.\u003c\/li\u003e\n\u003cli\u003eSheet body assembly structure: light weight, space saving, transportable, resourceful, reusable and environmentally friendly.\u003c\/li\u003e\n\u003cli\u003eLarge hollow structure: PC can withstand high temperatures, making it convenient for drying conventional and high-performance filaments.\u003c\/li\u003e\n\u003cli\u003eThe packaging bag is made of biodegradable and environmentally friendly PBAT and PLA biological materials, in line with EU export standards.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ctable border=\"1\" dir=\"ltr\" cellpadding=\"0\" cellspacing=\"0\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Features\"}'\u003eFeatures\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Advantage\"}'\u003eAdvantage\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Benefit\"}'\u003eBenefit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"PC material\"}'\u003ePC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"High toughness and strength\"}'\u003eHigh toughness and strength\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Reusable\"}'\u003eReusable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Assembled structure\"}'\u003eAssembled structure\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Saving space\"}'\u003eSaving space\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Save space, convenient transportation, save resources, and environment friendly\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eSave space, convenient transportation, save resources, and environment friendly\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Snap design\"}'\u003eSnap design\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Firm\"}'\u003eFirm\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"No loosening occurs during use\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eNo loosening occurs during use\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"The packaging bag uses PBAT and PLA biological materials\"}'\u003eThe packaging bag uses PBAT and PLA biological materials\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Degradable\"}'\u003eDegradable\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Environmental friendly, in line with EU export standards\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eEnvironmental friendly, in line with EU export standards\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Large hollow structure, PC material\"}'\u003eLarge hollow structure, PC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Breathable and good temperature resistance\"}'\u003eBreathable and good temperature resistance\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Convenient for drying conventional and high-performance filaments.\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eConvenient for drying conventional and high-performance filaments.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"PC material\"}'\u003ePC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Transparent\"}'\u003eTransparent\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Observe the usage of filaments in real time.\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eObserve the usage of filaments in real time.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct patent:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eUtility model (examination); design.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDistinguish the front and back of the eSpool, the side with grooves and label slots is the front side, and the smooth side is the back side.\u003c\/li\u003e\n\u003cli\u003eAlign the 3 tabs of the small piece with the fixing holes and insert them into the back of the disc.\u003c\/li\u003e\n\u003cli\u003ePut the filament into the eSpool.\u003c\/li\u003e\n\u003cli\u003eAlign the other disc with the fixed pillar and press down.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly instructions: \u003ca href=\"http:\/\/www.esun3d.net\/UploadFiles\/files\/2020\/11\/19\/fd7ee36e7ab549f29a92318d9a61d008.mp4\" target=\"_blank\"\u003e\u003cspan\u003eeSpool uses video\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-1_480x480.png?v=1614710347\" alt=\"\" width=\"209\" height=\"178\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-1_480x480.png?v=1614710347\"\u003e\u003cimg height=\"212\" width=\"212\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-2_480x480.png?v=1614710378\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-2_480x480.png?v=1614710378\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"205\" width=\"205\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-3_480x480.png?v=1614710427\" alt=\"\"\u003e\u003cimg height=\"213\" width=\"213\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-4_480x480.png?v=1614710465\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-4_480x480.png?v=1614710465\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eQuestions\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003e Possible reasons\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eSolution\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThe latch structure is difficult to insert\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eInserting into the wrong side\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eThe concave side is the outer side of the spool, and the smooth side is the inner side of the spool.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eWhen changing filaments, the remaining filaments are scattered\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eChange filaments without using up\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIt is recommended to use half or more before replacement. Before changing the filament, use a band to pass through the hollow part to bind the remaining filaments.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThe latch structure is difficult to pull out\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHarder to hold by hand\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUse tools, or use greater force to press and pull out\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e NOTE: This is a consumable item that is not under warranty.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/stlfilesforthereusablespoolesun.zip?v=1622236055\"\u003e\u003cstrong\u003eClick here\u003c\/strong\u003e\u003c\/a\u003e if you would like to 3D print the spool (please select Second Generation model)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 19.6px;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/stlfilesforthereusablespoolesun.zip?v=1622236055\"\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/a\u003e\u003c\/span\u003eCommonly purchased together with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-pla-refilament-175-mm-1kg-spool-various-colors?variant=39300531585186\"\u003eeSun Refilament PLA+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-petg-refilament-1-75-mm-1-kg-spooless-various-colors?variant=31380676509827\"\u003eeSun Refilament PETG\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-evacuum-kit-10-vacuum-bags\"\u003eeSun eVacuum Kit (10 Vacuum Bags)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-ebox-filament-storage\"\u003eeSun eBox Filament Smart Storage and Dryer\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2021-03-05T14:17:03-05:00","created_at":"2021-03-02T13:15:32-05:00","vendor":"ESUN","type":"Accessories","tags":["accessories","Box","boxing","dryer","ebox","esun ebox","esun filament","esun refilament","esun refills","Filament","filament dryer","offer","petg refilament","petg refills","petg spooless","pla+ spooless","refilament","Refill","refill coil","refill filament","Spooless"],"price":300,"price_min":300,"price_max":300,"available":true,"price_varies":false,"compare_at_price":300,"compare_at_price_min":300,"compare_at_price_max":300,"compare_at_price_varies":false,"variants":[{"id":39299747512482,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ESUN-SPL-KIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"eSun eSpool - 1kg Reusable Spool for eSun Refilament","public_title":null,"options":["Default Title"],"price":300,"weight":500,"compare_at_price":300,"inventory_quantity":111,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572200760","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/7_49f6b039-d359-476f-a733-8acd269a5a0c.jpg?v=1614711085","\/\/www.digitmakers.ca\/cdn\/shop\/products\/1_c28a93a9-302a-41c4-9da6-88f1f043bfcf.jpg?v=1614710977","\/\/www.digitmakers.ca\/cdn\/shop\/products\/6_6845efc9-a202-490b-a73f-553de86a363e.jpg?v=1614711086","\/\/www.digitmakers.ca\/cdn\/shop\/products\/2_07f79624-7702-4920-bab2-ba17ee6d03ec.jpg?v=1614711085","\/\/www.digitmakers.ca\/cdn\/shop\/products\/4_8aa396ea-2508-4a71-a30b-0719f99d9329.jpg?v=1614711086","\/\/www.digitmakers.ca\/cdn\/shop\/products\/5_365306a2-d0af-4c40-aa3b-6071802ceded.jpg?v=1614711086"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/7_49f6b039-d359-476f-a733-8acd269a5a0c.jpg?v=1614711085","options":["Title"],"media":[{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":20319837683874,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/7_49f6b039-d359-476f-a733-8acd269a5a0c.jpg?v=1614711085"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/7_49f6b039-d359-476f-a733-8acd269a5a0c.jpg?v=1614711085","width":1200},{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":20319811698850,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/1_c28a93a9-302a-41c4-9da6-88f1f043bfcf.jpg?v=1614710977"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/1_c28a93a9-302a-41c4-9da6-88f1f043bfcf.jpg?v=1614710977","width":1200},{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":20319837651106,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/6_6845efc9-a202-490b-a73f-553de86a363e.jpg?v=1614711086"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/6_6845efc9-a202-490b-a73f-553de86a363e.jpg?v=1614711086","width":1200},{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":20319837520034,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/2_07f79624-7702-4920-bab2-ba17ee6d03ec.jpg?v=1614711085"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/2_07f79624-7702-4920-bab2-ba17ee6d03ec.jpg?v=1614711085","width":1200},{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":20319837585570,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/4_8aa396ea-2508-4a71-a30b-0719f99d9329.jpg?v=1614711086"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/4_8aa396ea-2508-4a71-a30b-0719f99d9329.jpg?v=1614711086","width":1200},{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":20319837618338,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/5_365306a2-d0af-4c40-aa3b-6071802ceded.jpg?v=1614711086"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/5_365306a2-d0af-4c40-aa3b-6071802ceded.jpg?v=1614711086","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\" style=\"text-align: center;\"\u003e\u003cstrong\u003eeSUN eSpool is only compatible for the \u003ca href=\"https:\/\/www.digitmakers.ca\/search?type=product\u0026amp;q=refilament\"\u003eeSUN Refilament Series\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith the growing popularity of 3D printing technology, the usage of 3D printing filaments has also increased. The filaments used in FDM 3D printing are mostly spooled, which occupies space and weight. To protect our environment, the detachable and reusable eSpool was designed.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eAdvantages\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUses transparent polycarbonate for high strength and toughness.\u003c\/li\u003e\n\u003cli\u003eSheet body assembly structure: light weight, space saving, transportable, resourceful, reusable and environmentally friendly.\u003c\/li\u003e\n\u003cli\u003eLarge hollow structure: PC can withstand high temperatures, making it convenient for drying conventional and high-performance filaments.\u003c\/li\u003e\n\u003cli\u003eThe packaging bag is made of biodegradable and environmentally friendly PBAT and PLA biological materials, in line with EU export standards.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ctable border=\"1\" dir=\"ltr\" cellpadding=\"0\" cellspacing=\"0\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Features\"}'\u003eFeatures\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Advantage\"}'\u003eAdvantage\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Benefit\"}'\u003eBenefit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"PC material\"}'\u003ePC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"High toughness and strength\"}'\u003eHigh toughness and strength\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Reusable\"}'\u003eReusable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Assembled structure\"}'\u003eAssembled structure\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Saving space\"}'\u003eSaving space\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Save space, convenient transportation, save resources, and environment friendly\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eSave space, convenient transportation, save resources, and environment friendly\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Snap design\"}'\u003eSnap design\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Firm\"}'\u003eFirm\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"No loosening occurs during use\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eNo loosening occurs during use\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"The packaging bag uses PBAT and PLA biological materials\"}'\u003eThe packaging bag uses PBAT and PLA biological materials\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Degradable\"}'\u003eDegradable\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Environmental friendly, in line with EU export standards\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eEnvironmental friendly, in line with EU export standards\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Large hollow structure, PC material\"}'\u003eLarge hollow structure, PC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Breathable and good temperature resistance\"}'\u003eBreathable and good temperature resistance\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Convenient for drying conventional and high-performance filaments.\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eConvenient for drying conventional and high-performance filaments.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"PC material\"}'\u003ePC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Transparent\"}'\u003eTransparent\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Observe the usage of filaments in real time.\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eObserve the usage of filaments in real time.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct patent:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eUtility model (examination); design.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDistinguish the front and back of the eSpool, the side with grooves and label slots is the front side, and the smooth side is the back side.\u003c\/li\u003e\n\u003cli\u003eAlign the 3 tabs of the small piece with the fixing holes and insert them into the back of the disc.\u003c\/li\u003e\n\u003cli\u003ePut the filament into the eSpool.\u003c\/li\u003e\n\u003cli\u003eAlign the other disc with the fixed pillar and press down.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly instructions: \u003ca href=\"http:\/\/www.esun3d.net\/UploadFiles\/files\/2020\/11\/19\/fd7ee36e7ab549f29a92318d9a61d008.mp4\" target=\"_blank\"\u003e\u003cspan\u003eeSpool uses video\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-1_480x480.png?v=1614710347\" alt=\"\" width=\"209\" height=\"178\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-1_480x480.png?v=1614710347\"\u003e\u003cimg height=\"212\" width=\"212\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-2_480x480.png?v=1614710378\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-2_480x480.png?v=1614710378\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"205\" width=\"205\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-3_480x480.png?v=1614710427\" alt=\"\"\u003e\u003cimg height=\"213\" width=\"213\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-4_480x480.png?v=1614710465\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-4_480x480.png?v=1614710465\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eQuestions\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003e Possible reasons\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eSolution\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThe latch structure is difficult to insert\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eInserting into the wrong side\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eThe concave side is the outer side of the spool, and the smooth side is the inner side of the spool.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eWhen changing filaments, the remaining filaments are scattered\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eChange filaments without using up\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIt is recommended to use half or more before replacement. Before changing the filament, use a band to pass through the hollow part to bind the remaining filaments.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThe latch structure is difficult to pull out\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHarder to hold by hand\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUse tools, or use greater force to press and pull out\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e NOTE: This is a consumable item that is not under warranty.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/stlfilesforthereusablespoolesun.zip?v=1622236055\"\u003e\u003cstrong\u003eClick here\u003c\/strong\u003e\u003c\/a\u003e if you would like to 3D print the spool (please select Second Generation model)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 19.6px;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/stlfilesforthereusablespoolesun.zip?v=1622236055\"\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/a\u003e\u003c\/span\u003eCommonly purchased together with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-pla-refilament-175-mm-1kg-spool-various-colors?variant=39300531585186\"\u003eeSun Refilament PLA+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-petg-refilament-1-75-mm-1-kg-spooless-various-colors?variant=31380676509827\"\u003eeSun Refilament PETG\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-evacuum-kit-10-vacuum-bags\"\u003eeSun eVacuum Kit (10 Vacuum Bags)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-ebox-filament-storage\"\u003eeSun eBox Filament Smart Storage and Dryer\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"}
eSun eSpool - 1kg Reusable Spool for eSun Refilament
$3.00
eSUN eSpool is only compatible for the eSUN Refilament Series With the growing popularity of 3D printing technology, the usage of 3D printing filaments has also increased. The filaments used in FDM 3D printing are mostly spooled, which occupies space and weight. To protect our environment, the detachable and reusable eSpool was designed. Advan...
{"id":872609513508,"title":"PEI Sheet with 486MP 3M Adhesive Backing 0.15mm Thick","handle":"pei-polyetherimide-sheet-with-3m-adhesive-sheet-various-sizes","description":"\u003cp\u003ePEI sheet grabs onto your 3D print and doesn't let go, you won't need to print raft anymore. After printing, allow the sheet to cool before removing your 3D print - print easily detaches once the sheet is cooled to room temperature. This is a multiple use, no-mess product.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.15 mm thickness - with protective film one one side and 3M adhesive sheet on the other side. \u003c\/li\u003e\n\u003cli\u003eWorks with ABS, PLA, HIPS, PET+, Brick, Wood \u0026amp; Flexible (TPE\/TPU) filaments\u003c\/li\u003e\n\u003cli\u003eInstalls much easier than masking tape or films typically used\u003c\/li\u003e\n\u003cli\u003eProtects build plate\u003c\/li\u003e\n\u003cli\u003eHeat resistant and durable, can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface\u003c\/li\u003e\n\u003cli\u003eCreates an optimal bond between the 3D printed object and build surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface.\u003c\/li\u003e\n\u003cli\u003ePEI can easily be resized to your specific heated build plate by cutting with a fine-toothed hacksaw.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-29T12:24:46-05:00","created_at":"2018-08-18T11:54:12-04:00","vendor":"GENERIC","type":"Parts","tags":["153","330","356","3D printer","400","accessories","build plate","mechanical","New Arrival","new-arrivals","PEI","pei sheet","Polyetherimide"],"price":900,"price_min":900,"price_max":3700,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35963817623714,"title":"153X299mm","option1":"153X299mm","option2":null,"option3":null,"sku":"GEN-PEI-153*299","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PEI Sheet with 486MP 3M Adhesive Backing 0.15mm Thick - 153X299mm","public_title":"153X299mm","options":["153X299mm"],"price":900,"weight":1000,"compare_at_price":null,"inventory_quantity":38,"inventory_management":"shopify","inventory_policy":"deny","barcode":"17623714","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":11969595998244,"title":"330 x 330mm","option1":"330 x 330mm","option2":null,"option3":null,"sku":"GEN-PEI-330*330","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PEI Sheet with 486MP 3M Adhesive Backing 0.15mm Thick - 330 x 330mm","public_title":"330 x 330mm","options":["330 x 330mm"],"price":1900,"weight":1000,"compare_at_price":null,"inventory_quantity":23,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10000489","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":11969596031012,"title":"356 x 356mm","option1":"356 x 356mm","option2":null,"option3":null,"sku":"GEN-PEI-356*356","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PEI Sheet with 486MP 3M Adhesive Backing 0.15mm Thick - 356 x 356mm","public_title":"356 x 356mm","options":["356 x 356mm"],"price":2300,"weight":1000,"compare_at_price":null,"inventory_quantity":34,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10000490","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":11969596063780,"title":"400 x 400mm","option1":"400 x 400mm","option2":null,"option3":null,"sku":"GEN-PEI-400*400","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PEI Sheet with 486MP 3M Adhesive Backing 0.15mm Thick - 400 x 400mm","public_title":"400 x 400mm","options":["400 x 400mm"],"price":3700,"weight":1000,"compare_at_price":null,"inventory_quantity":30,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10000491","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/PEI_SHEETS.jpg?v=1594469363"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/PEI_SHEETS.jpg?v=1594469363","options":["Size"],"media":[{"alt":"PEI Sheet with 486MP 3M Adhesive Backing 0.15mm Thick - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":806570852483,"position":1,"preview_image":{"aspect_ratio":1.0,"height":425,"width":425,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/PEI_SHEETS.jpg?v=1594469363"},"aspect_ratio":1.0,"height":425,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/PEI_SHEETS.jpg?v=1594469363","width":425}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003ePEI sheet grabs onto your 3D print and doesn't let go, you won't need to print raft anymore. After printing, allow the sheet to cool before removing your 3D print - print easily detaches once the sheet is cooled to room temperature. This is a multiple use, no-mess product.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.15 mm thickness - with protective film one one side and 3M adhesive sheet on the other side. \u003c\/li\u003e\n\u003cli\u003eWorks with ABS, PLA, HIPS, PET+, Brick, Wood \u0026amp; Flexible (TPE\/TPU) filaments\u003c\/li\u003e\n\u003cli\u003eInstalls much easier than masking tape or films typically used\u003c\/li\u003e\n\u003cli\u003eProtects build plate\u003c\/li\u003e\n\u003cli\u003eHeat resistant and durable, can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface\u003c\/li\u003e\n\u003cli\u003eCreates an optimal bond between the 3D printed object and build surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface.\u003c\/li\u003e\n\u003cli\u003ePEI can easily be resized to your specific heated build plate by cutting with a fine-toothed hacksaw.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e"}
PEI Sheet with 486MP 3M Adhesive Backing 0.15mm Thick
$9.00
PEI sheet grabs onto your 3D print and doesn't let go, you won't need to print raft anymore. After printing, allow the sheet to cool before removing your 3D print - print easily detaches once the sheet is cooled to room temperature. This is a multiple use, no-mess product. 0.15 mm thickness - with protective film one one side and 3M adhesive...
Sale
Modifi3D PRINT FINISHING TOOL
$30.00 $43.00
{"id":8058612299,"title":"Modifi3D PRINT FINISHING TOOL","handle":"3d-print-finishing-tool-modifi3d","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e\u003c\/strong\u003e is a unique heated pen with specially coated different shapes tips designed to finish, fix and modify 3D printed parts. MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e Is carefully designed to get ride of much of the sanding, scraping and snapping to finish off your 3D prints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e\u003c\/strong\u003e makes it very comfortable to use and extremely easy to control when precision is important.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e\u003c\/strong\u003e works with PLA, ABS and other 3D printing materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"500\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/nwD55Mf8Qyw\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cp\u003eWith MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e finishing 3D prints should be easy . Simply plug in the USB, touch the switch and in less than 15 seconds you are ready to go. You will be able to remove any unwanted material or modify your print without having to redesign and print again!\u003c\/p\u003e\n\u003cp\u003ePlace on its stand and in 25 seconds it will go into sleep mode (a basic stand is included but you can print your own stand\/tool holder with our downloadable 3D file).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch5\u003eSTEP BY STEP\u003c\/h5\u003e\n\u003cp\u003e1. Remove the protective cap (if used) and place MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e on the included stand.\u003c\/p\u003e\n\u003cp\u003e2. Plug in the USB (USB 2.0 or 3.0 recommended).\u003c\/p\u003e\n\u003cp\u003e3. Touch the metal switch to start heating. A red light indicates that MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e is switched on.\u003c\/p\u003e\n\u003cp\u003e3. In less than 15 seconds MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e will reach around 300ºC (572ºF) and is ready for use. To increase the temperature or reach the maximum of 420-450ºC (788-842ºF) continue to touch the metal switch until the required temperature is reached.\u003c\/p\u003e\n\u003cp\u003e4. If MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e is not used for 25 seconds it will go into sleep mode (light will go out and the tip will start to cool). To wake MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e just gently touch the switch and the heating process will continue.\u003c\/p\u003e\n\u003cp\u003e5. Always unplug the USB if MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e is not being used.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch5\u003eQUICK CHANGE TIPS\u003c\/h5\u003e\n\u003cp\u003e1. To change tips unplug the USB and allow to cool fully.\u003c\/p\u003e\n\u003cp\u003e2. Unscrew the locking nut and pull out the tip\u003c\/p\u003e\n\u003cp\u003e3. Push the replacement tip in fully and tighten the locking nut\u003c\/p\u003e\n\u003cp\u003e4. Plug in the USB... Easy!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch5\u003eHOW TO CLEAN MODIFI3D TIPS\u003c\/h5\u003e\n\u003cp\u003eOver time you may want to clean the interchangeable tips. We recommend using a damp sponge to remove any plastic or residue from the tips. This works best whilst the tips are still warm (but obviously not hot enough to pose a risk of burning). \u003cb\u003ePlease ensure that the USB is unplugged and the tips have cooled to a safe temperature.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eDo not use abrasive cleaning products. This can damage the special coating on the tips.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.thingiverse.com\/thing:1185681\"\u003ePrint your own MODI3D STAND Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications : \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e5V 8W\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 or USB 3.0 recommended\u003c\/li\u003e\n\u003cli\u003eSize: 15mm (0.6\") x 117mm (4.6\") excluding tips\u003c\/li\u003e\n\u003cli\u003eWeight: 120g (4.3 oz)\u003c\/li\u003e\n\u003cli\u003eCable: 1.5m (59\") long to USB A plug\u003c\/li\u003e\n\u003cli\u003eHeats up to 300ºC (572ºF) in less than 15 seconds.\u003c\/li\u003e\n\u003cli\u003eMaximum temperature of 420-450ºC (788-842ºF)\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-01-29T12:27:00-05:00","created_at":"2017-01-29T12:27:04-05:00","vendor":"MODIFI3D","type":"Accessories","tags":["3d print finishing tool","accessories","Cleaning","Deal","Finishing Tools","Modifi3d","print-finishing","toolkit"],"price":3000,"price_min":3000,"price_max":3000,"available":true,"price_varies":false,"compare_at_price":4300,"compare_at_price_min":4300,"compare_at_price_max":4300,"compare_at_price_varies":false,"variants":[{"id":26393876811,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MOD001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Modifi3D PRINT FINISHING TOOL","public_title":null,"options":["Default Title"],"price":3000,"weight":500,"compare_at_price":4300,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5060461300014","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/Modifi3D-1.png?v=1613452905"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Modifi3D-1.png?v=1613452905","options":["Title"],"media":[{"alt":"Modifi3D PRINT FINISHING TOOL - Digitmakers.ca","id":94741495844,"position":1,"preview_image":{"aspect_ratio":1.0,"height":893,"width":893,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Modifi3D-1.png?v=1613452905"},"aspect_ratio":1.0,"height":893,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Modifi3D-1.png?v=1613452905","width":893}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e\u003c\/strong\u003e is a unique heated pen with specially coated different shapes tips designed to finish, fix and modify 3D printed parts. MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e Is carefully designed to get ride of much of the sanding, scraping and snapping to finish off your 3D prints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e\u003c\/strong\u003e makes it very comfortable to use and extremely easy to control when precision is important.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e\u003c\/strong\u003e works with PLA, ABS and other 3D printing materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"500\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/nwD55Mf8Qyw\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cp\u003eWith MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e finishing 3D prints should be easy . Simply plug in the USB, touch the switch and in less than 15 seconds you are ready to go. You will be able to remove any unwanted material or modify your print without having to redesign and print again!\u003c\/p\u003e\n\u003cp\u003ePlace on its stand and in 25 seconds it will go into sleep mode (a basic stand is included but you can print your own stand\/tool holder with our downloadable 3D file).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch5\u003eSTEP BY STEP\u003c\/h5\u003e\n\u003cp\u003e1. Remove the protective cap (if used) and place MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e on the included stand.\u003c\/p\u003e\n\u003cp\u003e2. Plug in the USB (USB 2.0 or 3.0 recommended).\u003c\/p\u003e\n\u003cp\u003e3. Touch the metal switch to start heating. A red light indicates that MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e is switched on.\u003c\/p\u003e\n\u003cp\u003e3. In less than 15 seconds MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e will reach around 300ºC (572ºF) and is ready for use. To increase the temperature or reach the maximum of 420-450ºC (788-842ºF) continue to touch the metal switch until the required temperature is reached.\u003c\/p\u003e\n\u003cp\u003e4. If MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e is not used for 25 seconds it will go into sleep mode (light will go out and the tip will start to cool). To wake MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e just gently touch the switch and the heating process will continue.\u003c\/p\u003e\n\u003cp\u003e5. Always unplug the USB if MODIFI\u003cspan class=\"color-text\"\u003e3D\u003c\/span\u003e is not being used.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch5\u003eQUICK CHANGE TIPS\u003c\/h5\u003e\n\u003cp\u003e1. To change tips unplug the USB and allow to cool fully.\u003c\/p\u003e\n\u003cp\u003e2. Unscrew the locking nut and pull out the tip\u003c\/p\u003e\n\u003cp\u003e3. Push the replacement tip in fully and tighten the locking nut\u003c\/p\u003e\n\u003cp\u003e4. Plug in the USB... Easy!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch5\u003eHOW TO CLEAN MODIFI3D TIPS\u003c\/h5\u003e\n\u003cp\u003eOver time you may want to clean the interchangeable tips. We recommend using a damp sponge to remove any plastic or residue from the tips. This works best whilst the tips are still warm (but obviously not hot enough to pose a risk of burning). \u003cb\u003ePlease ensure that the USB is unplugged and the tips have cooled to a safe temperature.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eDo not use abrasive cleaning products. This can damage the special coating on the tips.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.thingiverse.com\/thing:1185681\"\u003ePrint your own MODI3D STAND Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications : \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e5V 8W\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 or USB 3.0 recommended\u003c\/li\u003e\n\u003cli\u003eSize: 15mm (0.6\") x 117mm (4.6\") excluding tips\u003c\/li\u003e\n\u003cli\u003eWeight: 120g (4.3 oz)\u003c\/li\u003e\n\u003cli\u003eCable: 1.5m (59\") long to USB A plug\u003c\/li\u003e\n\u003cli\u003eHeats up to 300ºC (572ºF) in less than 15 seconds.\u003c\/li\u003e\n\u003cli\u003eMaximum temperature of 420-450ºC (788-842ºF)\u003c\/li\u003e\n\u003c\/ul\u003e"}
Modifi3D PRINT FINISHING TOOL
$30.00
MODIFI3D is a unique heated pen with specially coated different shapes tips designed to finish, fix and modify 3D printed parts. MODIFI3D Is carefully designed to get ride of much of the sanding, scraping and snapping to finish off your 3D prints. MODIFI3D makes it very comfortable to use and extremely easy to control when precision is impor...
Sold Out
{"id":8058615563,"title":"Cleaning Nozzle Drill bits Needles 0.3 mm 3 pcs","handle":"cleaning-nozzle-drill-bits-needles-0-3-mm-3-pcs","description":"\u003cp\u003eHi Quality Long Cleaning Needles 0.3 mm , 50 mm long .\u003c\/p\u003e\n\u003cp\u003eHeat up the nozzle and insert the cleaning needle to clean the nozzle and PTFE tube .\u003c\/p\u003e\n\u003cp\u003eUsed with any size of nozzles Min. 0.3 mm\u003c\/p\u003e","published_at":"2017-01-29T12:27:25-05:00","created_at":"2017-01-29T12:27:25-05:00","vendor":"GENERIC","type":"Accessories","tags":["accessories","Cleaning","cleaning kit","drill bits","needel"],"price":600,"price_min":600,"price_max":600,"available":false,"price_varies":false,"compare_at_price":800,"compare_at_price_min":800,"compare_at_price_max":800,"compare_at_price_varies":false,"variants":[{"id":26393897867,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GEN-CLN-NOZ-DRL-KIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Cleaning Nozzle Drill bits Needles 0.3 mm 3 pcs","public_title":null,"options":["Default Title"],"price":600,"weight":300,"compare_at_price":800,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001240","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3d-printer-needle-cleaning.jpg?v=1613452906"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3d-printer-needle-cleaning.jpg?v=1613452906","options":["Title"],"media":[{"alt":"Cleaning Nozzle Drill bits Needles 0.3 mm 3 pcs - Digitmakers.ca","id":94741725220,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3d-printer-needle-cleaning.jpg?v=1613452906"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3d-printer-needle-cleaning.jpg?v=1613452906","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHi Quality Long Cleaning Needles 0.3 mm , 50 mm long .\u003c\/p\u003e\n\u003cp\u003eHeat up the nozzle and insert the cleaning needle to clean the nozzle and PTFE tube .\u003c\/p\u003e\n\u003cp\u003eUsed with any size of nozzles Min. 0.3 mm\u003c\/p\u003e"}
Cleaning Nozzle Drill bits Needles 0.3 mm 3 pcs
$6.00
Hi Quality Long Cleaning Needles 0.3 mm , 50 mm long . Heat up the nozzle and insert the cleaning needle to clean the nozzle and PTFE tube . Used with any size of nozzles Min. 0.3 mm
Flush Cutter
$8.00
{"id":8058636171,"title":"Flush Cutter","handle":"flush-cutter","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlato Flush Cutter #170 is used to clean 3d printed parts , raft and supporting material .\u003c\/p\u003e\n\u003cp\u003eEvery Maker should have one of these cutters.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-29T12:29:00-05:00","created_at":"2017-01-29T12:29:46-05:00","vendor":"GENERIC","type":"Accessories","tags":["accessories","Cleaning","cleaning kit","Finishing Tools","Flush Cutter","toolkit"],"price":800,"price_min":800,"price_max":800,"available":true,"price_varies":false,"compare_at_price":800,"compare_at_price_min":800,"compare_at_price_max":800,"compare_at_price_varies":false,"variants":[{"id":26393971659,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TO-002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Flush Cutter","public_title":null,"options":["Default Title"],"price":800,"weight":500,"compare_at_price":800,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001151","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/Plato_170_Wire_Cutters_1024x1024_c7e2de7b-ceb2-4c09-97ea-d9516f25a174.jpg?v=1613452918"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Plato_170_Wire_Cutters_1024x1024_c7e2de7b-ceb2-4c09-97ea-d9516f25a174.jpg?v=1613452918","options":["Title"],"media":[{"alt":"Flush Cutter - Digitmakers.ca","id":94743592996,"position":1,"preview_image":{"aspect_ratio":1.499,"height":683,"width":1024,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Plato_170_Wire_Cutters_1024x1024_c7e2de7b-ceb2-4c09-97ea-d9516f25a174.jpg?v=1613452918"},"aspect_ratio":1.499,"height":683,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Plato_170_Wire_Cutters_1024x1024_c7e2de7b-ceb2-4c09-97ea-d9516f25a174.jpg?v=1613452918","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlato Flush Cutter #170 is used to clean 3d printed parts , raft and supporting material .\u003c\/p\u003e\n\u003cp\u003eEvery Maker should have one of these cutters.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
Flush Cutter
$8.00
Plato Flush Cutter #170 is used to clean 3d printed parts , raft and supporting material . Every Maker should have one of these cutters.
{"id":5791019139234,"title":"PEI Magnetic Build Plate For Ender 3 Pro\/V2\/Ender 5","handle":"pei-magnetic-build-plate-for-ender-3-pro-v2-ender-5","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e235 mm x 235 mm x (0.5mm spring steel thickness, 1mm magnetic sheet)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApplicable for: Ender 3, Ender 3 pro,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eEnder 5,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eEnder 5 Pro\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eComes with M3 adhesive-side magnetic sheet that can be installed on the bed.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFlexible, easily removable and adheres to magnetic surfaces very well.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaintains a high strength and heat resistance.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with most filaments, such as PLA, PETG, PEEK, ABS.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRough texture results in strong build plate adhesion and easy removal of prints. Just slightly bend to pop your print right off.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWhen used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through between prints.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"409\" height=\"230\" src=\"https:\/\/www.youtube.com\/embed\/2ZiBIZJtw34\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","published_at":"2020-10-02T16:17:05-04:00","created_at":"2020-10-02T15:52:12-04:00","vendor":"GENERIC","type":"Accessories","tags":["accessories","Bed","build plate","build plate adhesion","build surface","buildplate","flexible build plate","magnetic","PEI","removable","sheet","smooth","textured"],"price":3000,"price_min":3000,"price_max":3000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36470705651874,"title":"Smooth Build Plate","option1":"Smooth Build Plate","option2":null,"option3":null,"sku":"CRE-PT-BED-MBP-END3-SMTH","requires_shipping":true,"taxable":true,"featured_image":{"id":19547817541794,"product_id":5791019139234,"position":2,"created_at":"2020-10-02T16:13:33-04:00","updated_at":"2021-09-01T20:46:39-04:00","alt":"PEI Magnetic Build Plate For Ender 3 Pro\/V2\/Ender 5 - Digitmakers.ca","width":1000,"height":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/20201002_153111_1.jpg?v=1630543599","variant_ids":[36470705651874]},"available":true,"name":"PEI Magnetic Build Plate For Ender 3 Pro\/V2\/Ender 5 - Smooth Build Plate","public_title":"Smooth Build Plate","options":["Smooth Build Plate"],"price":3000,"weight":1000,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"15000065","featured_media":{"alt":"PEI Magnetic Build Plate For Ender 3 Pro\/V2\/Ender 5 - Digitmakers.ca","id":11723041472674,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/20201002_153111_1.jpg?v=1630543599"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":36470705717410,"title":"Textured Build Plate","option1":"Textured Build Plate","option2":null,"option3":null,"sku":"CRE-PT-BED-MBP-END3-TXT","requires_shipping":true,"taxable":true,"featured_image":{"id":19547817509026,"product_id":5791019139234,"position":1,"created_at":"2020-10-02T16:13:33-04:00","updated_at":"2021-09-01T20:46:39-04:00","alt":"PEI Magnetic Build Plate For Ender 3 Pro\/V2\/Ender 5 - Digitmakers.ca","width":1000,"height":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/20201002_153322.jpg?v=1630543599","variant_ids":[36470705717410]},"available":true,"name":"PEI Magnetic Build Plate For Ender 3 Pro\/V2\/Ender 5 - Textured Build Plate","public_title":"Textured Build Plate","options":["Textured Build Plate"],"price":3000,"weight":1000,"compare_at_price":null,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"15000066","featured_media":{"alt":"PEI Magnetic Build Plate For Ender 3 Pro\/V2\/Ender 5 - Digitmakers.ca","id":11723041407138,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/20201002_153322.jpg?v=1630543599"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/20201002_153322.jpg?v=1630543599","\/\/www.digitmakers.ca\/cdn\/shop\/products\/20201002_153111_1.jpg?v=1630543599"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/20201002_153322.jpg?v=1630543599","options":["Size"],"media":[{"alt":"PEI Magnetic Build Plate For Ender 3 Pro\/V2\/Ender 5 - Digitmakers.ca","id":11723041407138,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/20201002_153322.jpg?v=1630543599"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/20201002_153322.jpg?v=1630543599","width":1000},{"alt":"PEI Magnetic Build Plate For Ender 3 Pro\/V2\/Ender 5 - Digitmakers.ca","id":11723041472674,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/20201002_153111_1.jpg?v=1630543599"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/20201002_153111_1.jpg?v=1630543599","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e235 mm x 235 mm x (0.5mm spring steel thickness, 1mm magnetic sheet)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApplicable for: Ender 3, Ender 3 pro,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eEnder 5,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eEnder 5 Pro\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eComes with M3 adhesive-side magnetic sheet that can be installed on the bed.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFlexible, easily removable and adheres to magnetic surfaces very well.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaintains a high strength and heat resistance.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with most filaments, such as PLA, PETG, PEEK, ABS.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRough texture results in strong build plate adhesion and easy removal of prints. Just slightly bend to pop your print right off.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWhen used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through between prints.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"409\" height=\"230\" src=\"https:\/\/www.youtube.com\/embed\/2ZiBIZJtw34\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e"}
PEI Magnetic Build Plate For Ender 3 Pro/V2/Ender 5
$30.00
235 mm x 235 mm x (0.5mm spring steel thickness, 1mm magnetic sheet) Applicable for: Ender 3, Ender 3 pro, Ender 5, Ender 5 Pro Comes with M3 adhesive-side magnetic sheet that can be installed on the bed. Flexible, easily removable and adheres to magnetic surfaces very well. Maintains a high strength and heat resistance. Compatible with most fi...
Flashforge Build Surface Adhesive Sheet
From $9.00
{"id":1105056301092,"title":"Flashforge Build Surface Adhesive Sheet","handle":"flashforge-creator-pro-dreamer-adhesive-sheet","description":"\u003cp\u003eOriginal Flashforge Adhesive Sheet.\u003c\/p\u003e","published_at":"2019-01-23T16:56:47-05:00","created_at":"2019-01-23T16:36:06-05:00","vendor":"Flashforge","type":"Parts","tags":["3D printer","accessories","build plate","Creator Pro","Dreamer","Flashforge","new-arrivals","sheet"],"price":900,"price_min":900,"price_max":1500,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":10054202621988,"title":"Guider II","option1":"Guider II","option2":null,"option3":null,"sku":"BU002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Flashforge Build Surface Adhesive Sheet - Guider II","public_title":"Guider II","options":["Guider II"],"price":1500,"weight":1000,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10000259","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":11969592885284,"title":"Creator Pro\/Creator Pro 2\/Inventor\/Dreamer","option1":"Creator Pro\/Creator Pro 2\/Inventor\/Dreamer","option2":null,"option3":null,"sku":"BU003-pro2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Flashforge Build Surface Adhesive Sheet - Creator Pro\/Creator Pro 2\/Inventor\/Dreamer","public_title":"Creator Pro\/Creator Pro 2\/Inventor\/Dreamer","options":["Creator Pro\/Creator Pro 2\/Inventor\/Dreamer"],"price":1000,"weight":1000,"compare_at_price":null,"inventory_quantity":61,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10000260","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":11969592918052,"title":"Finder","option1":"Finder","option2":null,"option3":null,"sku":"BU004","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Flashforge Build Surface Adhesive Sheet - Finder","public_title":"Finder","options":["Finder"],"price":900,"weight":1000,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10000261","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":30264709873795,"title":"Creator 3","option1":"Creator 3","option2":null,"option3":null,"sku":"FF-AdhesiveSheet-c3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Flashforge Build Surface Adhesive Sheet - Creator 3","public_title":"Creator 3","options":["Creator 3"],"price":1500,"weight":1000,"compare_at_price":null,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":"15000002","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/Untitledd-1.jpg?v=1594465727"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Untitledd-1.jpg?v=1594465727","options":["Model"],"media":[{"alt":"Flashforge Build Surface Adhesive Sheet - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":1915373092995,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Untitledd-1.jpg?v=1594465727"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Untitledd-1.jpg?v=1594465727","width":2048}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eOriginal Flashforge Adhesive Sheet.\u003c\/p\u003e"}
Flashforge Build Surface Adhesive Sheet
$15.00
Original Flashforge Adhesive Sheet.
{"id":7497312960742,"title":"Vision Miner - Nano Polymer Adhesive - Various Sizes","handle":"visionminer-nano-polymer-adhesive-various-sizes","description":"\u003cp\u003e\u003cstrong\u003eVision Miner Nano Polymer Adhesive\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for PEEK, Ultem™, PPSU, and other high-performance FDM polymers, this build plate glue works for nearly every filament - Nylon, ABS, PLA, PETG, PEI, PSU, and every filament we've tested so far.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eNot only that, but it works on multiple build surfaces as well: \u003cbr\u003e\u003cbr\u003eBorosilicate glass, ceramic glass, PCB board, Carbon Fiber, Fiberglass, Aluminum, BuildTak™, PEI, and more.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for PEEK, PEI, and high-temp materials\u003c\/li\u003e\n\u003cli\u003eNO MESS like Glue Stick or Hair Spray - Better Grip\u003c\/li\u003e\n\u003cli\u003eWorks on Many Surfaces (glass, carbon, resins, etc)\u003c\/li\u003e\n\u003cli\u003eEasy to clean and re-apply\u003c\/li\u003e\n\u003cli\u003eWorks with normal-temp materials like ABS, PLA, and Nylon\u003c\/li\u003e\n\u003cli\u003eMade from safe, non-toxic, organic compounds\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2021-12-08T15:49:36-05:00","created_at":"2021-12-08T15:34:47-05:00","vendor":"Visionminer","type":"Parts","tags":["3D printer","accessories","Adhesive","Adhesive Pen","Glue","nano","nano polymer","Visionminer"],"price":2000,"price_min":2000,"price_max":4500,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42166735929574,"title":"50ml","option1":"50ml","option2":null,"option3":null,"sku":"VSMR-NANO-POLYADS-50ML","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Vision Miner - Nano Polymer Adhesive - Various Sizes - 50ml","public_title":"50ml","options":["50ml"],"price":2000,"weight":1000,"compare_at_price":null,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":"850003679181","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42166735962342,"title":"120ml","option1":"120ml","option2":null,"option3":null,"sku":"VSMR-NANO-POLYADS-120ML","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Vision Miner - Nano Polymer Adhesive - Various Sizes - 120ml","public_title":"120ml","options":["120ml"],"price":4500,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"850003679174","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/nano-polymer-adhesive-vision-miner-00850003679136-00850003679136-adhesion-15239277379633_1000x_81609b1d-3c2a-4e29-b50b-a339454f7b6f.jpg?v=1638995980"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/nano-polymer-adhesive-vision-miner-00850003679136-00850003679136-adhesion-15239277379633_1000x_81609b1d-3c2a-4e29-b50b-a339454f7b6f.jpg?v=1638995980","options":["Size"],"media":[{"alt":"Vision Miner - Nano Polymer Adhesive - Various Sizes - Digitmakers.ca","id":28880232677606,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/nano-polymer-adhesive-vision-miner-00850003679136-00850003679136-adhesion-15239277379633_1000x_81609b1d-3c2a-4e29-b50b-a339454f7b6f.jpg?v=1638995980"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/nano-polymer-adhesive-vision-miner-00850003679136-00850003679136-adhesion-15239277379633_1000x_81609b1d-3c2a-4e29-b50b-a339454f7b6f.jpg?v=1638995980","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eVision Miner Nano Polymer Adhesive\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for PEEK, Ultem™, PPSU, and other high-performance FDM polymers, this build plate glue works for nearly every filament - Nylon, ABS, PLA, PETG, PEI, PSU, and every filament we've tested so far.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eNot only that, but it works on multiple build surfaces as well: \u003cbr\u003e\u003cbr\u003eBorosilicate glass, ceramic glass, PCB board, Carbon Fiber, Fiberglass, Aluminum, BuildTak™, PEI, and more.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for PEEK, PEI, and high-temp materials\u003c\/li\u003e\n\u003cli\u003eNO MESS like Glue Stick or Hair Spray - Better Grip\u003c\/li\u003e\n\u003cli\u003eWorks on Many Surfaces (glass, carbon, resins, etc)\u003c\/li\u003e\n\u003cli\u003eEasy to clean and re-apply\u003c\/li\u003e\n\u003cli\u003eWorks with normal-temp materials like ABS, PLA, and Nylon\u003c\/li\u003e\n\u003cli\u003eMade from safe, non-toxic, organic compounds\u003c\/li\u003e\n\u003c\/ul\u003e"}
Vision Miner - Nano Polymer Adhesive - Various Sizes
$20.00
Vision Miner Nano Polymer Adhesive Designed for PEEK, Ultem™, PPSU, and other high-performance FDM polymers, this build plate glue works for nearly every filament - Nylon, ABS, PLA, PETG, PEI, PSU, and every filament we've tested so far.Not only that, but it works on multiple build surfaces as well: Borosilicate glass, ceramic glass, PCB board, ...
Sale
Kapton Tape 3DPrinter High Temp-10mm
$5.00 $7.00
{"id":8058576331,"title":"Kapton Tape 3DPrinter High Temp-10mm","handle":"kapton-tape-3dprinter-high-temp-10mm","description":"\u003cp\u003eHigh temperature 10 mm thickness tape commonly used in electronics repair. PREMIUM QUALITY, High temperature tape is widely used for 3D Printer nozzle . Due to it's semi-transparent shiny gold color is also has a myriad of hobby and craft uses. Commonly used in electronics repair, it is the ideal choice for QFP or BGA rework operations. It is also well suited for use with through-hole repair operations. User assumes all risk for application.\u003c\/p\u003e","published_at":"2017-01-29T12:23:23-05:00","created_at":"2017-01-29T12:23:23-05:00","vendor":"GENERIC","type":"Accessories","tags":["accessories","Kapton","Kapton Tape"],"price":500,"price_min":500,"price_max":500,"available":true,"price_varies":false,"compare_at_price":700,"compare_at_price_min":700,"compare_at_price_max":700,"compare_at_price_varies":false,"variants":[{"id":26393698827,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KP001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kapton Tape 3DPrinter High Temp-10mm","public_title":null,"options":["Default Title"],"price":500,"weight":100,"compare_at_price":700,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":"15000053","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/shopping-2.jpg?v=1613452896"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/shopping-2.jpg?v=1613452896","options":["Title"],"media":[{"alt":"Kapton Tape 3DPrinter High Temp-10mm - Digitmakers.ca","id":94736384036,"position":1,"preview_image":{"aspect_ratio":1.5,"height":300,"width":450,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/shopping-2.jpg?v=1613452896"},"aspect_ratio":1.5,"height":300,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/shopping-2.jpg?v=1613452896","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHigh temperature 10 mm thickness tape commonly used in electronics repair. PREMIUM QUALITY, High temperature tape is widely used for 3D Printer nozzle . Due to it's semi-transparent shiny gold color is also has a myriad of hobby and craft uses. Commonly used in electronics repair, it is the ideal choice for QFP or BGA rework operations. It is also well suited for use with through-hole repair operations. User assumes all risk for application.\u003c\/p\u003e"}
Kapton Tape 3DPrinter High Temp-10mm
$5.00
High temperature 10 mm thickness tape commonly used in electronics repair. PREMIUM QUALITY, High temperature tape is widely used for 3D Printer nozzle . Due to it's semi-transparent shiny gold color is also has a myriad of hobby and craft uses. Commonly used in electronics repair, it is the ideal choice for QFP or BGA rework operations. It is ...
Sale
Cleaning Nozzle Drill Kit 3D Printer (0.1mm to 1mm）
$12.00 $15.00
{"id":8058576203,"title":"Cleaning Nozzle Drill Kit 3D Printer (0.1mm to 1mm）","handle":"cleaning-nozzle-drill-kit-3d-printer-0-1mm-to-1mm","description":"\u003cul\u003e\n\u003cli\u003eMade In Jappan\u003c\/li\u003e\n\u003cli\u003e100% Brand new and high quality\u003c\/li\u003e\n\u003cli\u003e10pcs carbide micro drill 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8,0.9, 1.0 mm\u003c\/li\u003e\n\u003cli\u003eDrill has a large scraps discharge space, little resistance and smoothly during the scraps discharge.\u003c\/li\u003e\n\u003cli\u003eUse high quality materials and fine grinding process makes bit more sharp cutting edge, reduce cutting force and broken drill, improve the quality of hole wall.\u003c\/li\u003e\n\u003cli\u003eThe cutting edges strictly avoid partial hole, ensure the quality.\u003c\/li\u003e\n\u003cli\u003eLong life, it can drill 2000-5000 pcs under normal working conditions, also can return grinding 4-5 times\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-01-29T12:23:23-05:00","created_at":"2017-01-29T12:23:23-05:00","vendor":"GENERIC","type":"Accessories","tags":["accessories","cleaning kit"],"price":1200,"price_min":1200,"price_max":1200,"available":true,"price_varies":false,"compare_at_price":1500,"compare_at_price_min":1500,"compare_at_price_max":1500,"compare_at_price_varies":false,"variants":[{"id":26393698699,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GEN-CLN-NOZ-KIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cleaning Nozzle Drill Kit 3D Printer (0.1mm to 1mm）","public_title":null,"options":["Default Title"],"price":1200,"weight":300,"compare_at_price":1500,"inventory_quantity":38,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001351","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/High-Quality10Pcs-PCB-Print-Circuit-Board-font-b-Carbide-b-font-font-b-Micro-b-font.jpg_220x220_816f6bf5-6d8a-44c2-bd48-0113f6e6879d.jpg?v=1613452896"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/High-Quality10Pcs-PCB-Print-Circuit-Board-font-b-Carbide-b-font-font-b-Micro-b-font.jpg_220x220_816f6bf5-6d8a-44c2-bd48-0113f6e6879d.jpg?v=1613452896","options":["Title"],"media":[{"alt":"Cleaning Nozzle Drill Kit 3D Printer (0.1mm to 1mm） - Digitmakers.ca","id":94736351268,"position":1,"preview_image":{"aspect_ratio":1.0,"height":220,"width":220,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/High-Quality10Pcs-PCB-Print-Circuit-Board-font-b-Carbide-b-font-font-b-Micro-b-font.jpg_220x220_816f6bf5-6d8a-44c2-bd48-0113f6e6879d.jpg?v=1613452896"},"aspect_ratio":1.0,"height":220,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/High-Quality10Pcs-PCB-Print-Circuit-Board-font-b-Carbide-b-font-font-b-Micro-b-font.jpg_220x220_816f6bf5-6d8a-44c2-bd48-0113f6e6879d.jpg?v=1613452896","width":220}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eMade In Jappan\u003c\/li\u003e\n\u003cli\u003e100% Brand new and high quality\u003c\/li\u003e\n\u003cli\u003e10pcs carbide micro drill 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8,0.9, 1.0 mm\u003c\/li\u003e\n\u003cli\u003eDrill has a large scraps discharge space, little resistance and smoothly during the scraps discharge.\u003c\/li\u003e\n\u003cli\u003eUse high quality materials and fine grinding process makes bit more sharp cutting edge, reduce cutting force and broken drill, improve the quality of hole wall.\u003c\/li\u003e\n\u003cli\u003eThe cutting edges strictly avoid partial hole, ensure the quality.\u003c\/li\u003e\n\u003cli\u003eLong life, it can drill 2000-5000 pcs under normal working conditions, also can return grinding 4-5 times\u003c\/li\u003e\n\u003c\/ul\u003e"}
Cleaning Nozzle Drill Kit 3D Printer (0.1mm to 1mm）
$12.00
Made In Jappan 100% Brand new and high quality 10pcs carbide micro drill 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8,0.9, 1.0 mm Drill has a large scraps discharge space, little resistance and smoothly during the scraps discharge. Use high quality materials and fine grinding process makes bit more sharp cutting edge, reduce cutting force and broken ...
{"id":4389934268547,"title":"MODIFI3D PRO : Enhanced 3D Print Finishing Tool","handle":"modifi3d-pro-enhanced-3d-print-finishing-tool-3d-printer-canada","description":"\u003cp\u003e\u003ciframe width=\"300\" height=\"500\" src=\"https:\/\/www.youtube.com\/embed\/e3wg3iQ3HeA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eModifi3D PRO is an evolution of the 3D print tool. It is now tougher and has more power. We have added adjustable temperature control with an LCD display. Temperature can now be set up to 450ºC to allow for future potential of new tips and attachments.\u003c\/p\u003e\n\u003cp\u003eThe PRO is designed to replace much of the sanding, scraping and snapping to finish off your 3D prints, and comes with 10 interchangeable tips. The new improved tips are stronger than before and provide more functions including the ability to produce countersinks and setting threaded inserts. See the tip section further down this page for the full range.\u003c\/p\u003e\n\u003cdiv class=\"template asset\" contenteditable=\"false\" data-alt-text=\"\" data-caption=\"\" data-id=\"19086482\"\u003e\n\u003cfigure\u003e\u003cimg alt=\"\" class=\"fit\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/019\/086\/482\/f81575be04bea316120469d396eb222f_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1509974286\u0026amp;auto=format\u0026amp;gif-q=50\u0026amp;lossless=true\u0026amp;s=b87b8fad06adb843e6812b4ffa87d3fe\"\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e10 interchangeable tips (with special coating).\u003c\/li\u003e\n\u003cli\u003eSimple and easy to use.\u003c\/li\u003e\n\u003cli\u003eLightweight and compact.\u003c\/li\u003e\n\u003cli\u003eRapid heat up to 200ºC in less than 25 seconds. (450ºC max)\u003c\/li\u003e\n\u003cli\u003eLCD Display\u003c\/li\u003e\n\u003cli\u003eAdjustable temperature control\u003c\/li\u003e\n\u003cli\u003eMore power (30W)\u003c\/li\u003e\n\u003cli\u003eAdjustable Standby and Sleep modes\u003c\/li\u003e\n\u003cli\u003eBasic stand included + downloadable 3D file to print your own stand\/tool holder.\u003c\/li\u003e\n\u003cli\u003eThe ideal companion for your 3D printer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/019\/086\/490\/4b5b59da3f09aecdcdc9368eca3c734c_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1509974315\u0026amp;auto=format\u0026amp;gif-q=50\u0026amp;lossless=true\u0026amp;s=9dd0ca48606cb411027eccf77276e9c3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAll Modifi3D PRO tips include our special coating to prevent sticking and feature improved strength due to the new constuction.\u003cbr\u003e\u003cbr\u003eThe kit comes complete with 10 interchangeable tips making it easy to choose the right tool for the job.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/019\/086\/494\/5e9dafbcf24da835ea396541366cfaf5_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1509974331\u0026amp;auto=format\u0026amp;gif-q=50\u0026amp;lossless=true\u0026amp;s=07407a0a6837804f1a203da995f2fa8e\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"bold\"\u003e30W\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"bold\"\u003e24V DC\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"bold\"\u003eLCD Display (Adjustable Temperature Control)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTemperature Range:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"bold\"\u003e150-450ºC (302-842ºF)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHandle Size:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"bold\"\u003e29mm x 17mm x 100mm (1.1\" x 0.6\" x 3.9\") excluding tips\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eHandle Weight:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"bold\"\u003e30g (1oz) approx.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"bold\"\u003eDC Power Supply (US, EU, UK, AU)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCable:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"bold\"\u003e1.5m (59\") long to 3.5 x 1.35mm DC plug\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2019-12-16T17:09:30-05:00","created_at":"2019-12-16T17:29:32-05:00","vendor":"MODIFI3D","type":"","tags":["3d print finishing tool","accessories","education","Finishing Tools","hobby","modifi 3d","modifi 3d pro","modifi 3d tips","modifi tips","Modifi3d","modifi3d pro","modified","modified3d","modify3d","modify3d pro","New","New Arrival","new-arrivals","toolkit"],"price":10400,"price_min":10400,"price_max":10400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31348166295683,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SDP-PFT-MODIFIED","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MODIFI3D PRO : Enhanced 3D Print Finishing Tool","public_title":null,"options":["Default Title"],"price":10400,"weight":1000,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5060461300038","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/322eda7410380ac86aad0cdde7a9f8bf_original_1.png?v=1594468106","\/\/www.digitmakers.ca\/cdn\/shop\/products\/56baf88e8135abc2d5ce40991ac7cf72_original.png?v=1594468106","\/\/www.digitmakers.ca\/cdn\/shop\/products\/9fbedcaaf03fbe383967fdc4fb0031fc_original.png?v=1594468106","\/\/www.digitmakers.ca\/cdn\/shop\/products\/9b6deeb476e6eb9128f683e1d2a89829_original_1.png?v=1594468106"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/322eda7410380ac86aad0cdde7a9f8bf_original_1.png?v=1594468106","options":["Title"],"media":[{"alt":"MODIFI3D PRO : Enhanced 3D Print Finishing Tool - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5777436934275,"position":1,"preview_image":{"aspect_ratio":1.778,"height":873,"width":1552,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/322eda7410380ac86aad0cdde7a9f8bf_original_1.png?v=1594468106"},"aspect_ratio":1.778,"height":873,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/322eda7410380ac86aad0cdde7a9f8bf_original_1.png?v=1594468106","width":1552},{"alt":"MODIFI3D PRO : Enhanced 3D Print Finishing Tool - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5777436967043,"position":2,"preview_image":{"aspect_ratio":2.429,"height":280,"width":680,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/56baf88e8135abc2d5ce40991ac7cf72_original.png?v=1594468106"},"aspect_ratio":2.429,"height":280,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/56baf88e8135abc2d5ce40991ac7cf72_original.png?v=1594468106","width":680},{"alt":"MODIFI3D PRO : Enhanced 3D Print Finishing Tool - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5777436999811,"position":3,"preview_image":{"aspect_ratio":0.642,"height":1060,"width":680,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/9fbedcaaf03fbe383967fdc4fb0031fc_original.png?v=1594468106"},"aspect_ratio":0.642,"height":1060,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/9fbedcaaf03fbe383967fdc4fb0031fc_original.png?v=1594468106","width":680},{"alt":"MODIFI3D PRO : Enhanced 3D Print Finishing Tool - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5777437032579,"position":4,"preview_image":{"aspect_ratio":1.789,"height":380,"width":680,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/9b6deeb476e6eb9128f683e1d2a89829_original_1.png?v=1594468106"},"aspect_ratio":1.789,"height":380,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/9b6deeb476e6eb9128f683e1d2a89829_original_1.png?v=1594468106","width":680}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003ciframe width=\"300\" height=\"500\" src=\"https:\/\/www.youtube.com\/embed\/e3wg3iQ3HeA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eModifi3D PRO is an evolution of the 3D print tool. It is now tougher and has more power. We have added adjustable temperature control with an LCD display. Temperature can now be set up to 450ºC to allow for future potential of new tips and attachments.\u003c\/p\u003e\n\u003cp\u003eThe PRO is designed to replace much of the sanding, scraping and snapping to finish off your 3D prints, and comes with 10 interchangeable tips. The new improved tips are stronger than before and provide more functions including the ability to produce countersinks and setting threaded inserts. See the tip section further down this page for the full range.\u003c\/p\u003e\n\u003cdiv class=\"template asset\" contenteditable=\"false\" data-alt-text=\"\" data-caption=\"\" data-id=\"19086482\"\u003e\n\u003cfigure\u003e\u003cimg alt=\"\" class=\"fit\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/019\/086\/482\/f81575be04bea316120469d396eb222f_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1509974286\u0026amp;auto=format\u0026amp;gif-q=50\u0026amp;lossless=true\u0026amp;s=b87b8fad06adb843e6812b4ffa87d3fe\"\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e10 interchangeable tips (with special coating).\u003c\/li\u003e\n\u003cli\u003eSimple and easy to use.\u003c\/li\u003e\n\u003cli\u003eLightweight and compact.\u003c\/li\u003e\n\u003cli\u003eRapid heat up to 200ºC in less than 25 seconds. (450ºC max)\u003c\/li\u003e\n\u003cli\u003eLCD Display\u003c\/li\u003e\n\u003cli\u003eAdjustable temperature control\u003c\/li\u003e\n\u003cli\u003eMore power (30W)\u003c\/li\u003e\n\u003cli\u003eAdjustable Standby and Sleep modes\u003c\/li\u003e\n\u003cli\u003eBasic stand included + downloadable 3D file to print your own stand\/tool holder.\u003c\/li\u003e\n\u003cli\u003eThe ideal companion for your 3D printer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/019\/086\/490\/4b5b59da3f09aecdcdc9368eca3c734c_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1509974315\u0026amp;auto=format\u0026amp;gif-q=50\u0026amp;lossless=true\u0026amp;s=9dd0ca48606cb411027eccf77276e9c3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAll Modifi3D PRO tips include our special coating to prevent sticking and feature improved strength due to the new constuction.\u003cbr\u003e\u003cbr\u003eThe kit comes complete with 10 interchangeable tips making it easy to choose the right tool for the job.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/019\/086\/494\/5e9dafbcf24da835ea396541366cfaf5_original.png?ixlib=rb-2.1.0\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1509974331\u0026amp;auto=format\u0026amp;gif-q=50\u0026amp;lossless=true\u0026amp;s=07407a0a6837804f1a203da995f2fa8e\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"bold\"\u003e30W\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"bold\"\u003e24V DC\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"bold\"\u003eLCD Display (Adjustable Temperature Control)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTemperature Range:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"bold\"\u003e150-450ºC (302-842ºF)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHandle Size:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"bold\"\u003e29mm x 17mm x 100mm (1.1\" x 0.6\" x 3.9\") excluding tips\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eHandle Weight:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"bold\"\u003e30g (1oz) approx.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"bold\"\u003eDC Power Supply (US, EU, UK, AU)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCable:\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"bold\"\u003e1.5m (59\") long to 3.5 x 1.35mm DC plug\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e"}
MODIFI3D PRO : Enhanced 3D Print Finishing Tool
$104.00
Modifi3D PRO is an evolution of the 3D print tool. It is now tougher and has more power. We have added adjustable temperature control with an LCD display. Temperature can now be set up to 450ºC to allow for future potential of new tips and attachments. The PRO is designed to replace much of the sanding, scraping and snapping to finish off you...
3D Printing Toolkit 32 Pcs
$37.00
{"id":1202775162916,"title":"3D Printing Toolkit 32 Pcs","handle":"3d-printing-toolkit-32-pcs","description":"\u003cp\u003eAll what you need to repair your 3D Printer, like changing your printer's nozzle, cutting PTFE tubing or cleaning your 3D printed object from support material.\u003c\/p\u003e\n\u003cp\u003eThis Kit Includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Tool Bag Various Colors \u003c\/li\u003e\n\u003cli\u003e5 x Mini File Set Various Profiles\u003c\/li\u003e\n\u003cli\u003e5 x Hex Key Metric Set 1.5, 2.0, 2.5, 3.0, 4.0 mm\u003c\/li\u003e\n\u003cli\u003e1 x Deburring Tool\u003c\/li\u003e\n\u003cli\u003e1 x Flat Nose Pliers\u003c\/li\u003e\n\u003cli\u003e1 x Mini Pliers\u003c\/li\u003e\n\u003cli\u003e1 x Flush Cutter\u003c\/li\u003e\n\u003cli\u003e1 x Nozzle Wrench\u003c\/li\u003e\n\u003cli\u003e1 x Nylon Brush\u003c\/li\u003e\n\u003cli\u003e1 x Brass Brush\u003c\/li\u003e\n\u003cli\u003e1 x Stainless Steel Brush\u003c\/li\u003e\n\u003cli\u003e1 x Spatula (Long)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x Spatula (Small)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e1 x PTFE Tube Cutter\u003c\/li\u003e\n\u003cli\u003e10 x .3mm Cleaning Needles\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-01-29T12:27:22-05:00","created_at":"2019-03-20T17:32:47-04:00","vendor":"GENERIC","type":"Accessories","tags":["accessories","Cleaning","cleaning kit","Flush Cutter","Nozzle Cleaning","ptfe-tubing","tool","toolkit"],"price":3700,"price_min":3700,"price_max":3700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":10646630924324,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GEN-TKT-32PC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D Printing Toolkit 32 Pcs","public_title":null,"options":["Default Title"],"price":3700,"weight":3000,"compare_at_price":null,"inventory_quantity":34,"inventory_management":"shopify","inventory_policy":"deny","barcode":"15000024","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printing-Toolkit-32-Pcs-Digitmakers-ca-6850.png?v=1691544652"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printing-Toolkit-32-Pcs-Digitmakers-ca-6850.png?v=1691544652","options":["Title"],"media":[{"alt":"3D Printing Toolkit 32 Pcs Digitmakers.ca","id":32347658518758,"position":1,"preview_image":{"aspect_ratio":1.017,"height":2400,"width":2440,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printing-Toolkit-32-Pcs-Digitmakers-ca-6850.png?v=1691544652"},"aspect_ratio":1.017,"height":2400,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printing-Toolkit-32-Pcs-Digitmakers-ca-6850.png?v=1691544652","width":2440}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eAll what you need to repair your 3D Printer, like changing your printer's nozzle, cutting PTFE tubing or cleaning your 3D printed object from support material.\u003c\/p\u003e\n\u003cp\u003eThis Kit Includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Tool Bag Various Colors \u003c\/li\u003e\n\u003cli\u003e5 x Mini File Set Various Profiles\u003c\/li\u003e\n\u003cli\u003e5 x Hex Key Metric Set 1.5, 2.0, 2.5, 3.0, 4.0 mm\u003c\/li\u003e\n\u003cli\u003e1 x Deburring Tool\u003c\/li\u003e\n\u003cli\u003e1 x Flat Nose Pliers\u003c\/li\u003e\n\u003cli\u003e1 x Mini Pliers\u003c\/li\u003e\n\u003cli\u003e1 x Flush Cutter\u003c\/li\u003e\n\u003cli\u003e1 x Nozzle Wrench\u003c\/li\u003e\n\u003cli\u003e1 x Nylon Brush\u003c\/li\u003e\n\u003cli\u003e1 x Brass Brush\u003c\/li\u003e\n\u003cli\u003e1 x Stainless Steel Brush\u003c\/li\u003e\n\u003cli\u003e1 x Spatula (Long)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x Spatula (Small)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e1 x PTFE Tube Cutter\u003c\/li\u003e\n\u003cli\u003e10 x .3mm Cleaning Needles\u003c\/li\u003e\n\u003c\/ul\u003e"}
3D Printing Toolkit 32 Pcs
$37.00
All what you need to repair your 3D Printer, like changing your printer's nozzle, cutting PTFE tubing or cleaning your 3D printed object from support material. This Kit Includes: 1 x Tool Bag Various Colors 5 x Mini File Set Various Profiles 5 x Hex Key Metric Set 1.5, 2.0, 2.5, 3.0, 4.0 mm 1 x Deburring Tool 1 x Flat Nose Pliers 1 x Mini Plie...
