- Home
- Build Surfaces & Adhesives
Browse our collection of build plates, build surfaces and bed adhesion accessories.
Build Surfaces & Adhesives
Dimafix Glue (90 ml)
$24.99 CAD
Dimafix Pen (90ml) is a new product based on the Dimafix Spray formula. The Dimafix Pen maintains the same adhesion properties of Dimafix Spray format but in dabber liquid bottle format. It has been known to last as much as 100 uses (your mileage may vary depending on bed size). It is water soluble so it is easy to clean. It works on a wider ran...
Visionminer - Nano Polymer Adhesive Sample - 10mL
$8.99 CAD
Visionminer Nano Polymer Adhesive Sample Bottle - 10mL Designed for PEEK, Ultem™, PPSU, and other high-performance FDM polymers, this build plate glue works for nearly every filament - Nylon, ABS, PLA, PETG, PEI, PSU, and every filament we've tested so far.Not only that, but it works on multiple build surfaces as well: Borosilicate glass, cerami...
PEI Magnetic Build Plate For Ender 3 Pro/V2/Ender 5
$39.99 CAD
235 mm x 235 mm x (0.5mm spring steel thickness, 1mm magnetic sheet) Applicable for: Ender 3, Ender 3 pro, Ender 5, Ender 5 Pro Comes with M3 adhesive-side magnetic sheet that can be installed on the bed. Flexible, easily removable and adheres to magnetic surfaces very well. Maintains a high strength and heat resistance. Compatible with most fi...
Spring Steel Sheet with PEI Coating Various Sizes
$19.99 CAD
Spring Steel Sheets are great alternatives for 3D printing surfaces. These sheets have a 0.1mm PEI sticker (single-side) for the best first layer adheasion and easy part removal when cooled. The flexibility of spring steel sheets make it easier to remove from magnetic beds and pop prints off the PEI surface. Two alignment notches make these plat...
3M Adhesive Transfer Tape 468MP - 20cm x 20cm
$4.99 CAD
3M Adhesive Transfer Tape 468MP Dimensions: 20 cm x 20 cm, or 8" x 8"
Raise3D E2 Flexible Plate with build surface
$118.99 CAD
Flexible build plate with handle & Buildtak printing surface for Raise3D E2 Series 3D Printers Only.
Raise3D Printing Build Surface
$59.99 CAD
This Genuine Raise3D Build Surface Build surface for Raise3D Pro2 Series or N Series Printers.This item does not include the high temperature build plate (metal plate or glass plate). Installation Instructions
BuildTak - 165 mm x 165 mm (6.5" x 6.5")
$10.00 CAD
Ideal build surface for FFF 3D printers. Key Features: Works with ABS, PLA, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface Installs much easier than masking tape or films typica...
BuildTak - 165 mm x 254 mm (6.5" x 10.0")
$15.00 CAD
Ideal build surface for FFF 3D printers. Key Features: Works with ABS, PLA, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface Installs much easier than masking tape or films typica...
BuildTak - 203 mm x 203 mm (8.0" x 8.0")
$14.50 CAD
Ideal build surface for FFF 3D printers. Key Features: Works with ABS, PLA, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface Installs much easier than masking tape or films typica...
BuildTak - 254 mm x 254 mm (10.0" x 10.0")
$21.00 CAD
Ideal build surface for FFF 3D printers. Key Features: Works with ABS, PLA, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface Installs much easier than masking tape or films typica...
BuildTak - 304 mm x 304 mm (12.0" x 12.0")
$30.00 CAD
Ideal build surface for FFF 3D printers. Key Features: Works with ABS, PLA, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface Installs much easier than masking tape or films typica...
BuildTak - 406 mm x 406 mm (16.0" x 16.0")
$54.00 CAD
Ideal build surface for FFF 3D printers. Key Features: Works with ABS, PLA, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface Installs much easier than masking tape or films typica...
Craftbot Flow / Flow XL Springsteel Plate with Kapton
$70.00 CAD
Springsteel plate with Kapton sheet for CraftBot Flow and Flow XL printers
Craftbot Flow Idex / Flow Idex XL Springsteel plate with kapton
$99.75 CAD
Springsteel plate with Kapton sheet for CraftBot Flow Idex and Flow Idex XL printers
PEI Magnetic Build Plate For FlashForge Creator Pro/ Pro2 Textured
$38.99 CAD
230mm x 150mm x (0.5mm spring steel thickness, 1.5mm magnetic sheet) Applicable for: Creator Pro, Creator Pro 2 Comes with M3 adhesive-side magnetic sheet that can be installed on the bed. Flexible, easily removable and adheres to magnetic surfaces very well. Maintains a high strength and heat resistance. Compatible with most filaments, such as...
Flexible Magnetic Build Plate for Anycubic Photon - Various Sizes
$39.99 CAD
Flexible Magnetic Build Plate for the AnyCubic Photon, Photon S (135mm x 80mm) and Photon X, Photon Mono X and SainSmart KL9 (202mm x 128mm) and all SLA printers that has similar dimensions Dimension: 135mm x 80mm 202mm x 128mm Included: Flexible magnetic build plate Magnetic base
Flashforge Adventurer 3 heated build Plate
$49.99 CAD
Heated Build Plate for Flashforge Adventurer 3 Size: 164*168mm
Flashforge Build Surface Adhesive Sheet
$19.99 CAD
Original Flashforge Adhesive Sheet.
FlashForge Creator 3 Flexible Magnetic Build Plate
$59.99 CAD
FlashForge Creator 3 Flexible Magnetic Build Plate
FlashForge Creator 3 Flexible Magnetic Build Plate with Magnetic Base
$134.99 CAD
FlashForge Creator 3 Flexible Magnetic Build Plate with Magnetic Base
FlashForge Creator Pro/Pro 2 Flexible Spring Build Plate
$34.99 CAD
Applicable for: Creator Pro, Creator Pro 2 Includes Flashforge print surface Magnet sheet with adhesive for easy installation Spring steel flex print surface
FlashForge Guider 2 / 2S Flexible Magnetic Build Plate
$59.99 CAD
Upgraded magnetic build plate for the Flashforge Guider 2 / Guider 2S
FlashForge Guider 2 Heated Bed
$199.99 CAD
Heated bed for the Flashforge Guider 2.
Flashforge Inventor IIs Build Platform
$49.99 CAD
Complete Flashforge Finder Build Plate , can be used as a second build plate or replacement .
Flashforge Inventor IIs Removable Magnetic Build Plate
$75.99 CAD
Complete Flashforge Inventor IIs Removable Magnetic Build Plate, can be used as a second build plate or replacement .
PEI Sheet 1 mm Thick with 486MP 3M Adhesive Backing
$59.99 CAD
PEI sheet grabs onto your 3D print and doesn't let go, you won't need to print raft anymore. After printing, allow the sheet to cool before removing your 3D print - print easily detaches once the sheet is cooled to room temperature. This is a multiple use, no-mess product. 1 mm thickness (Polyetherimide) is amber transparent solid, without...
PEI Sheet with 486MP 3M Adhesive Backing 0.15mm Thick
$11.99 CAD
PEI sheet grabs onto your 3D print and doesn't let go, you won't need to print raft anymore. After printing, allow the sheet to cool before removing your 3D print - print easily detaches once the sheet is cooled to room temperature. This is a multiple use, no-mess product. 0.15 mm thickness - with protective film one one side and 3M adhesive...
Fusion3 F410 Glass Print Bed
$54.99 CAD
Replacement glass print bed for the Fusion3 F410 3D Printer. NOTE: These are not compatible with the F400-S or F400-HFR.
MK2 HEATBED 12-24 volts , Internal Thermistor
$19.99 CAD
LED, Resistor and internal Thermistor Soldered Laminate: FR4 1.6±0.15mm Two layer, 35μm copper,Copper plated holes Power Input: 12Vdc Resistance between 1-2 ohm Dimensions 214mmx 214mm
Vision Miner - Nano Polymer Adhesive - Various Sizes
$26.99 CAD
Vision Miner Nano Polymer Adhesive Designed for PEEK, Ultem™, PPSU, and other high-performance FDM polymers, this build plate glue works for nearly every filament - Nylon, ABS, PLA, PETG, PEI, PSU, and every filament we've tested so far.Not only that, but it works on multiple build surfaces as well: Borosilicate glass, ceramic glass, PCB board, ...
Flashforge Creator Pro / Creator Pro 2 Heated Bed Element
$69.99 CAD
Original Flashforge Heated Bed Element Compatible with Creator Pro and Creator Pro 2.
Flashforge Adventurer III Flexible Removable Build Plate
$17.99 CAD
Flashforge Adventurer III Flexible Removable Build Plate
Flashforge Creator Pro 2 Build Plate
$24.99 CAD
Build plate applicable only for the Flashforge Creator Pro 2 3D printer.
Magnetic Heatbed MK52 24V for Prusa i3 MK3/S/+
$164.99 CAD
This product is the replacement Magnetic heatbed MK52 24V. It is ONLY compatible with the MK3/S/+. It is NOT compatible with the MK2.5/S. This product includes: Magnetic heatbed MK52 24V (1 pcs) Heatbed-Einsy power cable (screw-attached) (1 pcs) Heatbed thermistor E3D (already mounted and fixed in place by the aluminum and kapton tapes) (1 pcs)...
Double-Sided Satin Powder-coated Spring Steel Sheet for Prusa i3 MK3/S/+ & MK2.5/S
$79.99 CAD
Double-sided satin powder-coated spring steel sheet for the Original Prusa i3 MK3/S/+ and MK2.5/S. The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets. The Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits be...
Double-Sided Textured PEI Powder-coated Spring Steel Sheet For i3 MK3S
$74.99 CAD
Double-sided textured PEI powder-coated spring steel sheet for the Original Prusa i3 MK3/S.
Original Spring Steel Sheet with Smooth Double-Sided PEI For i3 MK3S
$64.99 CAD
Spring steel sheet with smooth double-sided PEI for the Original Prusa i3 MK3/S. Update: The steel sheet color may differ from the product picture (black, gold, green, etc). The smooth PEI surface on the steel sheet, as well as all other properties, remain the very same for all color versions.
Official Creality Double-sided Flexible Build Plate 235*235*1.2mm
$69.99 CAD
Original Creality double-sided flexible build plate, smooth PEI coated on one side and textured on the other. 235*235*1.2mm will fit: Ender 3 Ender 3 Pro Ender 3S Ender 3 V2 Ender 5 Ender 5 Pro Ender 5S Ender 3 S1 Ender 3 S1 Pro
Official Creality PEI Glass Build Plate 235*235*4mm
$29.95 CAD
Original Creality powder coated PEI 235*235*4mm glass build plate. 235*235*4mm will fit: Ender 3 Ender 3 Pro Ender 3S Ender 3 V2 Ender 5 Ender 5 Pro Ender 5S Ender 3 S1 Ender 3 S1 Pro
Raise3D Buildtak Printing Surface (Pro3 Series Only)
$64.99 CAD
Buildtak printing surface for Raise3D Pro3 Series 3D Printers Only.
Raise3D Build Plate with Handle & Buildtak Printing Surface (Pro3 Series Only)
$116.99 CAD
Build plate with handle & Buildtak printing surface for Raise3D Pro3 Series 3D Printers Only.
Flashforge Creator 3 Series Flexible Magnetic Steel Plate
$39.99 CAD
Flexible Magnetic Steel Plate for Flashforge Creator 3 series 3D printers
Flashforge Creator 3 Heater Board V0.5
$39.99 CAD
Heated bed board including cable for the Flashforge Creator 3 3D printer.
Print Sheet with Double-Sided Printing Stickers for Snapmaker 2.0 A350
$44.99 CAD
Overall features: High dimensional accuracy. Special stickers for better bed adhesion. Easy to flex and remove the print. Compatibility: Snapmaker 2.0 Custom Double-sided Coating Makes your print adhere to the printing surface. Flexible Sheet Release your print with a simple flex. Dimensions: 334 x 364 x 1.5mm
Magigoo Original
$22.99 CAD
All you need for sure adhesion of 3D prints Magigoo is an easy to use 3D printing adhesive designed to address 'the first layer not sticking problem'. Magigoo ensures a strong adhesion to the hot plate. But the magic starts when printing is ready: just wait for the plate to cool down and then remove your prints with just a finger flick! In addi...
Magigoo Pro PC (Polycarbonate)
$29.99 CAD
MAGIGOO PC is designed to work exclusively with polycarbonate type filaments. This adhesive for professional use makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the ...
Magigoo Pro PP (Polypropylene)
$29.99 CAD
MAGIGOO PP is designed for professional use, to work exclusively with polypropylene filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off if the included procedure is followed. Why Magigoo Pro PP? Polypropylene (PP) is a thermoplastic semi-crystalline polymer exhibiting prop...