- Home
- Mechanical 3D Printing Components

Choose from our wide range of Mechanical 3D Printing Components to smoothly run your 3D Printing activities. DigitMakers provides you with 3D Printing Components that can cater to all your 3D Printing needs. Order Today !
Mechanical 3D Printing Components

0.4mm Nozzle For Flashforge Guider 2 High Temperature Hotend
$19.99 CAD
Nozzle for New high temp. Flashforge Guider 2 High Temperature Hotend 0.4mm Maximum temperature is 300 °C. Upholding filament such as Nylon(PA),PC Supported material: PLA, ABS, Nylon, TPU, TPE, Wood, and PC.

3D Printer Dual Extruder 1.75mm (All Metal)
$87.99 CAD
Want to Make your own printer and need reliable extruder ? This is Geeetech upgraded 3D Printer single head MK8 Dual extruder, which has a quality and the best performance for DIY 3D Printer . Specifications: Dual Extrusion nozzle: 0.4mm Material of Print: 1.75mm PLA/ABS Flow rate of Nozzle: about 24cc / h Supports shaft speed: 40mm/s Voltage...

3D Printer Extruder 1.75mm (All Metal)
$57.99 CAD
Want to assemble your own printer and need reliable extruder ? You have reached to the right place!! This is Geeetech upgraded 3D Printer single head MK8 extruder, which has outstanding quality and the best performance for DIY and professional systems. Simply adding a holder, you can assemble your own dual head extrusion. With 42BYGHW818 steppe...

3D Printer Extruder Drive Gear for 1.75mm & 3mm – Brass Pulley 5mm
$2.49 CAD
3D Printer Extruder Drive Gear for 1.75mm & 3mm Filament – Brass Pulley 5mm Description Size: 11 mm x 11 mm Inner hole: 5 mm Gear parts: 7 mm Material: Brass Fixed screw holes: the M3 thread, two fixed screw holes, fixed more strong, can better avoid skidding gear. Gear diameter: 11 mm Within the fixed screw: M3, six Angle Package Includ...

3D printer Flexible Helical Coupling Set of 2
$9.99 CAD
Product Weight: 0.014 kg Holes Size :5 mm / 8 mm Length :25 mm Product Size: 2.4 x 1.7 x 1.9 cm / 0.94 x 0.67 x 0.75 inches

3D printer Heatsink 40*40*11CM heating block
$2.49 CAD
Center hole goods size : 12 mm Screw mounting hole: 3 mm Mounting holes from: 31 mm Fin length: 40 mm ,width: 40 mm, Thickness: 11 mm

3D Printer MK10 PTFE Tube
$3.50 CAD
MK10 PTFE insert ID2 mm , OD 4 mm The PTFE used inside the MK10 Extruder to provide smooth way to the filament and prevent the filament from deforming before it reaches the nozzle. Approximately 60mm long.

Aluminum GT2 Timing Pulley - 10 mm belt - 16 Tooth - 5mm Bore
$4.99 CAD
GT2 aluminum timing pulley. Inner diameter: 5mm Outer diameter: Approx. 16mm Height: approx. 19mm Teeth: 16 Tooth diameter: 12.3mm Tooth width: 11mm Package contents: 1 GT2 aluminum timing pulley with 16 teeth.

Aluminum GT2 Timing Pulley - 10 mm belt - 20 Tooth - 5mm Bore
$4.99 CAD
GT2 aluminum timing pulley. Inner diameter: 5mm Outer diameter: Approx. 16mm Height: approx. 19mm Teeth: 20 Tooth diameter: 12.3mm Tooth width: 11mm Package contents: 1 GT2 aluminum timing pulley with 20 teeth.

Aluminum GT2 Timing Pulley - 6 mm belt - 20 Tooth - 5mm Bore
$4.99 CAD
GT2 aluminum timing pulley. Inner diameter: 5mm Outer diameter: Approx. 16mm Teeth: 20 Tooth width: 6mm Package contents: 1 GT2 aluminum timing pulley with 20 teeth.

Aluminum GT2 Timing Pulley - 6mm Belt - 16 Tooth - 5mm Bore
$4.99 CAD
GT2 aluminum timing pulley. Inner diameter: 5mm Outer diameter: 13mm Height: 14mm Teeth: 16 Tooth diameter: 9.5mm Tooth width: 7.3mm Package contents: 1 GT2 aluminum timing pulley with 16 teeth.

Ball Bearing 608ZZ
$1.50 CAD
Qty:1 Ball Bearing Model:608ZZ Size:8 mm(ID)x 22 mm(OD)x 7 mm(L)

Ball Bearing 623ZZ
$1.50 CAD
Qty:1 Ball Bearing Model:623ZZ Size:4 mm(ID)x 13 mm(OD)x 5 mm(L)

Ball Bearing 624ZZ
$1.50 CAD
Qty:1 Ball Bearing Model:624ZZ Size:4 mm(ID)x 13 mm(OD)x 5 mm(L)

Ball Bearing 625-2RS
$1.50 CAD
Qty:1 Ball Bearing Model:625-2RS Size:5 mm(ID)x 16 mm(OD)x 5 mm(L)

Ball Bearing 625ZZ
$1.50 CAD
Qty:1 Ball Bearing Model:625ZZ Size:5 mm(ID)x 16 mm(OD)x 5 mm(L)

Ball Bearing 626ZZ
$1.75 CAD
Qty:1 Ball Bearing Model:626ZZ Size:6 mm(ID)x 19 mm(OD)x 6 mm(L)

Ball Bearing MR104ZZ
$0.99 CAD
Qty:1 Ball Bearing Model:MR104ZZ Size:4 mm(ID)x 10 mm(OD)x 4 mm(L)

BCN3D Collet
$6.99 CAD
Compatible with the BCN3D Sigma and the BCN3D Sigmax 3D printers. Spare part for any hotend. This part locks the bowden tube while printing.

BCN3D Flat Flex Cable FFC Set
$49.99 CAD
Replacement Cable for the BCN3D Sigmax R17 or R19 series of printers. These Flat Flexible Cables send electronic signals from the Main Electronics Board to the daughter boards for temperature, motor control and end stops. Various Cables included

BCN3D Hotend by e3D 0.4mm
$119.99 CAD
Fully assembled full metal hotend optimized and manufactured by the global specialist e3D™, which ensure the highest quality standards, providing a smooth and reliable extrusion under different printing environments. The BCN3D printers allow printing with different hotend sizes: 0.3, 0.4, 0.5 (steel nozzle), 0.6, 0.8 and 1.0 mm. Small nozzles ar...

BCN3D Hotend Electronics Board
$39.99 CAD
Replacement board for BCN3D Sigma R17 hotend

BCN3D Limit Switch
$5.49 CAD
Endstop for the X, Z and Y axis. Compatible with the BCN3D Sigma and the BCN3D Sigmax 3D printers.

BCN3D Main Electronic Board
$249.99 CAD
Replacement board for BCN3D Sigma R17

BCN3D Stepper Driver Board
$39.99 CAD
Replacement driver board for BCN3D Sigma R17 steppers Note: These are not the upgraded Trinamic Drivers. These are the original DRV8825 Drivers

Bondtech Ball Bearing 5x8x2.5
$2.50 CAD
High precision needle bearing that is used in our Bondtech drive gears, for shaft diameter 3.0 mm, two bearings is used for one drive gear.

Bondtech BMG Extruder For Mosquito Hotend RH & LH
$109.00 CAD
Please choose from the Standard (RH) or Left-hand (mirrored) The Bondtech BMG-M extruder combines high performance and resolution with low weight. Together with our proven and highly celebrated Dual-Drive technology you can expect problem free material feeding. This extruder is optimized for the Mosquito / Mosquito Magnum hotends with and integr...

Bondtech BMG Aluminum Mount
$19.99 CAD
This mount for BMG extruder is CNC machined to precise tolerances in 3 mm thick aluminium that assures a secure and stable mounting for the extruder.

BondTech BMG Extruder Lefthand 1.75 mm
$104.99 CAD
Bondtech now brings you the best and lightest performing extruder on the market that combines low weight with high feeding capacity together with our proven and highly celebrated Dual-Drive technology for maximum performance without grinding and slipping. For 1.75 mm size filament only. The Bondtech BMG utilizes an internal gearing ratio o...

BondTech BMG Extruder Standard 1.75 mm
$104.99 CAD
Bondtech now brings you the best and lightest performing extruder on the market that combines low weight with high feeding capacity together with our proven and highly celebrated Dual-Drive technology for maximum performance without grinding and slipping. For 1.75 mm size filament only. The Bondtech BMG utilizes an internal gearing ratio ...

BondTech BMG-HT for Funmat HT
$484.99 CAD
A High Temperature Extruder The BMG-HT for the Intamsys Funmat HT is a high temperature upgrade kit based on our popular Bondtech Mini Geared (BMG) Extruder. It has a milled Aluminum housing, and a high temperature pancake stepper motor capable of withstanding build chamber temperatures up to 150℃. For A High Temperature 3D printer Increase the...

Bondtech DDS Extension Cable 40cm
$32.99 CAD
DDS Extension Cable This extension cable will allow you to use our Direct Drive System for Creality3D CR-10S on the S4 and S5 models. It will extend the existing cables an extra 40 cm. Now includes a 65cm PTFE tube

Bondtech DDX For Creality 3D printers
$130.00 CAD
The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that replaces the original bowden extruder with a direct drive extruder setup. It is a high-performance Dual Drive extruder based on the BMG Bondtech Mini Geared. Multiple Hotends Compatibility This model was created to be compatible with the original hotend of ea...

Bondtech Drive Gear Needle Bearing
$3.50 CAD
High precision needle bearing that is used in our Bondtech drive gears, for shaft diameter 3.0 mm, two bearings is used for one drive gear.

Bondtech Drivegear kit (1.75 Direct, 5mm shaft)
$36.00 CAD
Bondtech DualDrive gears for 1.75 mm filament, Precision custom cnc machined with extreme precision guarantees that you get the grip you always wanted.Manufactured in hardened steel with an protective surface treatment will give you long lifetime and extreme reliability.The gears come as a set consisting of a Primary drivegear with a M3 setscre...

Bondtech Extruder Bracket - Wanhao I3
$19.99 CAD
This custom bracket for mounting the Bondtech Mini onto the Wanhao I3 printer without any modification to the original mount, makes the installation really simple and straight forward.Made of 2mm steel. Laser cut & bent + powder coated in black finish.Weight 71 grams

Bondtech Extruder Bracket - Wanhao I3 Plus
$19.99 CAD
This custom bracket for mounting the Bondtech Mini onto the Wanhao I3 printer without any modification to the original mount, makes the installation really simple and straight forward.Made of 2mm steel. Laser cut & bent + powder coated in black finish.Weight 71 grams

BondTech Extruder Creality CR-10 with CR-10S mount
$114.99 CAD
This Kit comes with CR10-S Mount This extruder upgrade kit will solve your feeding and grinding problems and will also give you higher resolution that will improve surface quality. It will also allow to print faster with sustained quality and no risk for grinding the filament.It features our lightweight BMG extruder with internal 3:1 gearing ...

BondTech Extruder Creality CR-10/Ender3 with CR-10 mount
$114.99 CAD
This Kit comes with CR10 Mount Dual Drive Extruder It allows for a more reliable printing with all sorts of filaments, both stiff and flexibles and the DualDrive system ensures that the extruder never loses grip of the filament so grinding, slipping is a thing of the past.The bowden tube is securely held in place by the 4mm industry stan...

Bondtech Extruder for Wanhao Duplicator 9
$129.99 CAD
The Wanhao D9 kit combines high performance with resolution and low weight and a compact building envelope. Together with BondTech proven and highly celebrated Dual-Drive technology you can expect problem free material feeding. This extruder is used with the factory hotend but can also be used with the MicroSwiss upgrades. 4X higher extrusion...

BondTech Extruder upgrade Creator Pro 2016 and later
$239.99 CAD
Now we are releasing our kit for FlashForge Creator Pro 2016 Dual Nozzle. This coldblock differs from the model used on Makerbot replicators & clones and are made especially to fit Flashforge Creator Pro 2016This kit gives you grinding free filament feed for your printer with our proven DualDrive technology with precision machined gears in ...

Bondtech Extruder upgrade kit Wanhao D6
$140.00 CAD
This extruder upgrade kit will solve your feeding and grinding problems and will also give you higher resolution that will improve surface quality. It will also allow to print faster with sustained quality and no risk for grinding the filament.It features our new lightweight BMG extruder with internal 3:1 gearing ratio combined with our DualD...

Bondtech Extruder V2 1.75 Universal
$189.99 CAD
Our new Bondtech Extruder Universal is based on our revolutionary new DualDrive technology that gives the best performance that is available today on the market.The V2 designs now allow for booth a Bowden and a Direct-drive setup according to your choice. The unit is ready for Direct drive use, for Bowden use you need the additional Bowden ad...

Bondtech Heatsink
$2.90 CAD
Heatsink in black anodized aluminum heatsink it is designed to remove heat from stepper motors . Equipped with 3M self-adhesive on the back for easy attachment. Fits Nema17 stepper motors.

BondTech Makerbot 2x Extruder Upgrade Kit
$254.99 CAD
Bondtech upgrade kit for Makerbot Replicator 2X dual nozzle. This kit provides a high-performance material feeding system with the ability to print faster with improved quality. The adjustable thumbscrew allows you to fine-tune the force acting on the filament. The housing parts are professionally SLS printed in polyamide for maximum strength a...

BondTech Makerbot Replicator 2 Kit
$130.00 CAD
BondTech Extruder Kit for Makerbot Replicator 2 This kit provides a upgrade for Makerbot Replicator 2 feeding system with the ability to print faster with improved quality. The adjustable thumbscrew allows you to fine-tune the force acting on the filament. The Dual Drive system ensures that the extruder never looses grip of the filament, so grin...

Bondtech Mini for Wanhao i3 Extruder
$130.00 CAD
Bondtech Mini with Dual-Drive gears that grips the filament from both sides without any slippage or grinding as an upgrade kit for the Wanhao I3 printer.The smaller effective diameter of the drivegear will increase the torque by about 50% and also the resolution will increase with 50% since the E-step value is 140 compared with the 96 as the s...

Bondtech Motor Gear - brass
$9.99 CAD
Hardened and precision ground shaft for the Bondtech gear kits.