Filament Storage & Dryers

Filament Storage & Dryers

Sort by:
{"id":6913890189474,"title":"ESun EBox Lite Filament Smart Storage \u0026 Dryer","handle":"esun-ebox-lite-filament-smart-storage-dryer","description":"\u003cp\u003e\u003cspan\u003eThe eBOX Lite is a cost-effective storage box with constant temperature and humidity, moisture-proof and dust-proof and heating function specially developed by eSUN for 3D printing filaments. Compared with the old eBOX, eBOX Lite removes the weighing function and improves the cost performance; the upper cover is made of transparent material, which helps to observe the remaining of filaments in real time; the curved heating plate and the sheet metal heat conduction plate design make the heat more uniform and easier to maintain constant temperature and humidity; heat insulation and flame retardant insulation cotton are placed on both sides of the interior, which are safe and anti-scald, and also have the function of heat preservation; the fan adopts a long-life and low-noise turbo fan, which has good effect and low noise; it also has wide compatibility with most of the 0.5\/1KG, 1.75\/2.85mm filaments on the market such as PLA, ABS, PETG, PVA, ePA, ePA-CF, ePA-GF, PC, TPU-95A, etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eProduct properties\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStore filaments at any time to prevent moisture and dust.\u003c\/li\u003e\n\u003cli\u003eTransparent material, real-time observation of filament usage.\u003c\/li\u003e\n\u003cli\u003eUniform heat, the arc heating piece and the sheet metal heat conduction piece are easier to maintain constant temperature and humidity in the box.\u003c\/li\u003e\n\u003cli\u003eHigh safety, heat insulation and flame retardant insulation cotton are placed on both sides to prevent scalding.\u003c\/li\u003e\n\u003cli\u003eWide compatibility, compatible with most 0.5\/1KG, 1.75\/2.85mm filaments on the market.\u003c\/li\u003e\n\u003cli\u003eLow noise, using long-life and low-noise turbofan.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed box\u003c\/strong\u003e: Store filaments, moisture-proof and dust-proof.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop cover PC material\u003c\/strong\u003e: Real-time observation of filaments usage, durable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc heating film\u003c\/strong\u003e: Heat evenly, making it easier to maintain constant temperature and humidity in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved sheet metal thermal conductive sheet\u003c\/strong\u003e: The temperature rises quickly and is more uniform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge chamber\u003c\/strong\u003e: Compatible with most 0.5\/1KG, 1.75\/2.85mm filaments on the market.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation cotton\u003c\/strong\u003e: High safety, anti-scald.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-life, low-noise turbofan\u003c\/strong\u003e: Low noise, even hot air flow in the cavity, durable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eInstructions for use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConnect the adapter to AC100-240V~50\/60Hz power supply, and insert the output end into the rear interface of the box.\u003c\/li\u003e\n\u003cli\u003ePress the power button to turn on.\u003c\/li\u003e\n\u003cli\u003eOpen the upper cover, put the desiccant into the empty slot at the end of the box, and put the filament spool in.\u003c\/li\u003e\n\u003cli\u003eAfter putting in the filament spool, pull the filament out from the outlet and close the upper cover. (The pulling direction of the filament can be from bottom to top, or top to bottom, adjusted according to different positions of the printer).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cstrong\u003eParameter Settings\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eThe product has a total of 4 buttons, which are on-off key\u003c\/span\u003e\u003cspan\u003e, \"M\" function key\u003c\/span\u003e\u003cspan\u003e, up key\u003c\/span\u003e\u003cspan\u003e and down key\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTwo modes: temperature setting mode \u003cstrong\u003eTEMP\u003c\/strong\u003e, heating time setting \u003cstrong\u003eTIME\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress \"M\" \u003c\/span\u003e\u003cspan\u003eto switch the function cyclically, and adjust the parameters with \u003c\/span\u003e\u003cspan\u003etwo directional keys.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBy default, the system enters sleep after 5 seconds of inactivity, and the backlight disappears in sleep mode. Press any key to wake up, and then press the power button to shut down after wakeup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDescription of Temperature Setting Mode\u003c\/h3\u003e\n\u003cp\u003ePress the function key \"M\" three times to switch to the temperature setting mode after power on. The screen will display TEMP. There are 3 levels in total, adjusted by the up or down key; the larger the number, the higher the temperature, and when it displays \"0\", it means no heating.\u003c\/p\u003e\n\u003cp\u003eRefer to the table below for specific gear setting recommendations. Set the heating temperature to the 3rd level for the highest temperature.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e \u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e\u003cem\u003eLevel Set Reference Table\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 534px;\" border=\"1\" cellpadding=\"0\" cellspacing=\"0\" data-mce-style=\"width: 534px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 83px;\" data-mce-style=\"width: 83px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eFilament\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 90px;\" data-mce-style=\"width: 90px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePLA\/PLA+\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 88px;\" data-mce-style=\"width: 88px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eABS\/ABS+\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 77px;\" data-mce-style=\"width: 77px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 58px;\" data-mce-style=\"width: 58px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePVA\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 64.7031px;\" data-mce-style=\"width: 64.7031px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eNylon\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 40.2969px;\" data-mce-style=\"width: 40.2969px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePC\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 83px;\" data-mce-style=\"width: 83px;\"\u003e\n\u003cp style=\"text-align: center;\" align=\"left\" data-mce-style=\"text-align: center;\"\u003eLevel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 90px;\" data-mce-style=\"width: 90px;\"\u003e\n\u003cp align=\"center\"\u003e1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 88px;\" data-mce-style=\"width: 88px;\"\u003e\n\u003cp align=\"center\"\u003e2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 77px;\" data-mce-style=\"width: 77px;\"\u003e\n\u003cp align=\"center\"\u003e2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 58px;\" data-mce-style=\"width: 58px;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 64.7031px;\" data-mce-style=\"width: 64.7031px;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 40.2969px;\" data-mce-style=\"width: 40.2969px;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e\u003cem\u003eLevel Set for Temperature \u0026amp; Humidity Reference Table\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 534px;\" align=\"left\" border=\"1\" cellpadding=\"0\" cellspacing=\"0\" data-mce-style=\"width: 534px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 131px;\" data-mce-style=\"width: 131px;\"\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eLevel\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 125px;\" data-mce-style=\"width: 125px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 135.438px;\" data-mce-style=\"width: 135.438px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e2\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 128.562px;\" data-mce-style=\"width: 128.562px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e3\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 131px;\" data-mce-style=\"width: 131px;\"\u003e\n\u003cp align=\"left\"\u003eHot plate TEMP\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 125px;\" data-mce-style=\"width: 125px;\"\u003e\n\u003cp align=\"center\"\u003e103℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 135.438px;\" data-mce-style=\"width: 135.438px;\"\u003e\n\u003cp align=\"center\"\u003e116℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 128.562px;\" data-mce-style=\"width: 128.562px;\"\u003e\n\u003cp align=\"center\"\u003e118℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 131px;\" data-mce-style=\"width: 131px;\"\u003e\n\u003cp align=\"left\"\u003eInside TEMP\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 125px;\" data-mce-style=\"width: 125px;\"\u003e\n\u003cp align=\"center\"\u003e40℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 135.438px;\" data-mce-style=\"width: 135.438px;\"\u003e\n\u003cp align=\"center\"\u003e50℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 128.562px;\" data-mce-style=\"width: 128.562px;\"\u003e\n\u003cp align=\"center\"\u003e55℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 131px;\" data-mce-style=\"width: 131px;\"\u003e\n\u003cp align=\"left\"\u003eInside humidity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 125px;\" data-mce-style=\"width: 125px;\"\u003e\n\u003cp align=\"center\"\u003e34.2%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 135.438px;\" data-mce-style=\"width: 135.438px;\"\u003e\n\u003cp align=\"center\"\u003e23%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 128.562px;\" data-mce-style=\"width: 128.562px;\"\u003e\n\u003cp align=\"center\"\u003e15%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote: The above data is tested under the conditions of indoor temperature 20℃ and humidity 55%. The temperature and humidity in the box will change slightly due to the different use environment.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 align=\"left\"\u003eHeating Time Setting Mode\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter turning on, press the function key \"M\" four times to switch to the heating time setting mode, the screen displays TIME, and the value displayed now is the remaining heating time in hours. \u003c\/li\u003e\n\u003cli\u003eThe value displayed in TIME mode decreases as time advances, similar to a countdown.\u003c\/li\u003e\n\u003cli\u003eIn TIME mode, press the up or down button to set the heating time, and each press will increase\/decrease by half an hour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eQuestion\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePossible cause\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSolution\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eNot enough drying effect\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eFilaments have serious water absorption or high-temperature filaments (such as nylon, PEEK and other filaments that need high-temperature drying)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eeBOX Lite only has the function of maintaining constant temperature and humidity during printing. It is not suitable for drying filaments with serious water absorption and high temperature (such as nylon, PEEK and other filaments that need high temperature drying). It is not suitable to promote the drying function.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThe screen does not light up, the buttons do not work, do not heat up, and the fan does not work\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eDamaged components\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eQuality problems return to the factory for repair or replacement\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2021-07-09T14:59:04-04:00","created_at":"2021-07-09T10:56:01-04:00","vendor":"ESUN","type":"Accessories","tags":["Box","boxing day","dryer","esun ebox lite","Filament","filament dryer","hobby"],"price":7499,"price_min":7499,"price_max":7499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40337614438562,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ESUN-EBOX-LITE","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ESun EBox Lite Filament Smart Storage \u0026 Dryer","public_title":null,"options":["Default Title"],"price":7499,"weight":2000,"compare_at_price":null,"inventory_quantity":54,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572201521","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/esuneboxlitethumbnail.png?v=1630542084","\/\/www.digitmakers.ca\/cdn\/shop\/products\/20210519152921483875953.jpg?v=1630542084","\/\/www.digitmakers.ca\/cdn\/shop\/products\/20210519152053686975299.jpg?v=1630542084","\/\/www.digitmakers.ca\/cdn\/shop\/products\/20210519152054124459305.jpg?v=1630542084"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/esuneboxlitethumbnail.png?v=1630542084","options":["Title"],"media":[{"alt":"ESun EBox Lite Filament Smart Storage \u0026 Dryer - Digitmakers.ca","id":22495526944930,"position":1,"preview_image":{"aspect_ratio":1.0,"height":633,"width":633,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/esuneboxlitethumbnail.png?v=1630542084"},"aspect_ratio":1.0,"height":633,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/esuneboxlitethumbnail.png?v=1630542084","width":633},{"alt":"ESun EBox Lite Filament Smart Storage \u0026 Dryer - Digitmakers.ca","id":22495448301730,"position":2,"preview_image":{"aspect_ratio":1.316,"height":380,"width":500,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/20210519152921483875953.jpg?v=1630542084"},"aspect_ratio":1.316,"height":380,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/20210519152921483875953.jpg?v=1630542084","width":500},{"alt":"ESun EBox Lite Filament Smart Storage \u0026 Dryer - Digitmakers.ca","id":22495448563874,"position":3,"preview_image":{"aspect_ratio":1.316,"height":380,"width":500,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/20210519152053686975299.jpg?v=1630542084"},"aspect_ratio":1.316,"height":380,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/20210519152053686975299.jpg?v=1630542084","width":500},{"alt":"ESun EBox Lite Filament Smart Storage \u0026 Dryer - Digitmakers.ca","id":22495448891554,"position":4,"preview_image":{"aspect_ratio":1.316,"height":380,"width":500,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/20210519152054124459305.jpg?v=1630542084"},"aspect_ratio":1.316,"height":380,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/20210519152054124459305.jpg?v=1630542084","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThe eBOX Lite is a cost-effective storage box with constant temperature and humidity, moisture-proof and dust-proof and heating function specially developed by eSUN for 3D printing filaments. Compared with the old eBOX, eBOX Lite removes the weighing function and improves the cost performance; the upper cover is made of transparent material, which helps to observe the remaining of filaments in real time; the curved heating plate and the sheet metal heat conduction plate design make the heat more uniform and easier to maintain constant temperature and humidity; heat insulation and flame retardant insulation cotton are placed on both sides of the interior, which are safe and anti-scald, and also have the function of heat preservation; the fan adopts a long-life and low-noise turbo fan, which has good effect and low noise; it also has wide compatibility with most of the 0.5\/1KG, 1.75\/2.85mm filaments on the market such as PLA, ABS, PETG, PVA, ePA, ePA-CF, ePA-GF, PC, TPU-95A, etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eProduct properties\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStore filaments at any time to prevent moisture and dust.\u003c\/li\u003e\n\u003cli\u003eTransparent material, real-time observation of filament usage.\u003c\/li\u003e\n\u003cli\u003eUniform heat, the arc heating piece and the sheet metal heat conduction piece are easier to maintain constant temperature and humidity in the box.\u003c\/li\u003e\n\u003cli\u003eHigh safety, heat insulation and flame retardant insulation cotton are placed on both sides to prevent scalding.\u003c\/li\u003e\n\u003cli\u003eWide compatibility, compatible with most 0.5\/1KG, 1.75\/2.85mm filaments on the market.\u003c\/li\u003e\n\u003cli\u003eLow noise, using long-life and low-noise turbofan.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed box\u003c\/strong\u003e: Store filaments, moisture-proof and dust-proof.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop cover PC material\u003c\/strong\u003e: Real-time observation of filaments usage, durable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc heating film\u003c\/strong\u003e: Heat evenly, making it easier to maintain constant temperature and humidity in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved sheet metal thermal conductive sheet\u003c\/strong\u003e: The temperature rises quickly and is more uniform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge chamber\u003c\/strong\u003e: Compatible with most 0.5\/1KG, 1.75\/2.85mm filaments on the market.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation cotton\u003c\/strong\u003e: High safety, anti-scald.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-life, low-noise turbofan\u003c\/strong\u003e: Low noise, even hot air flow in the cavity, durable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eInstructions for use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConnect the adapter to AC100-240V~50\/60Hz power supply, and insert the output end into the rear interface of the box.\u003c\/li\u003e\n\u003cli\u003ePress the power button to turn on.\u003c\/li\u003e\n\u003cli\u003eOpen the upper cover, put the desiccant into the empty slot at the end of the box, and put the filament spool in.\u003c\/li\u003e\n\u003cli\u003eAfter putting in the filament spool, pull the filament out from the outlet and close the upper cover. (The pulling direction of the filament can be from bottom to top, or top to bottom, adjusted according to different positions of the printer).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cstrong\u003eParameter Settings\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eThe product has a total of 4 buttons, which are on-off key\u003c\/span\u003e\u003cspan\u003e, \"M\" function key\u003c\/span\u003e\u003cspan\u003e, up key\u003c\/span\u003e\u003cspan\u003e and down key\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTwo modes: temperature setting mode \u003cstrong\u003eTEMP\u003c\/strong\u003e, heating time setting \u003cstrong\u003eTIME\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress \"M\" \u003c\/span\u003e\u003cspan\u003eto switch the function cyclically, and adjust the parameters with \u003c\/span\u003e\u003cspan\u003etwo directional keys.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBy default, the system enters sleep after 5 seconds of inactivity, and the backlight disappears in sleep mode. Press any key to wake up, and then press the power button to shut down after wakeup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDescription of Temperature Setting Mode\u003c\/h3\u003e\n\u003cp\u003ePress the function key \"M\" three times to switch to the temperature setting mode after power on. The screen will display TEMP. There are 3 levels in total, adjusted by the up or down key; the larger the number, the higher the temperature, and when it displays \"0\", it means no heating.\u003c\/p\u003e\n\u003cp\u003eRefer to the table below for specific gear setting recommendations. Set the heating temperature to the 3rd level for the highest temperature.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e \u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e\u003cem\u003eLevel Set Reference Table\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 534px;\" border=\"1\" cellpadding=\"0\" cellspacing=\"0\" data-mce-style=\"width: 534px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 83px;\" data-mce-style=\"width: 83px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eFilament\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 90px;\" data-mce-style=\"width: 90px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePLA\/PLA+\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 88px;\" data-mce-style=\"width: 88px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eABS\/ABS+\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 77px;\" data-mce-style=\"width: 77px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 58px;\" data-mce-style=\"width: 58px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePVA\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 64.7031px;\" data-mce-style=\"width: 64.7031px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eNylon\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 40.2969px;\" data-mce-style=\"width: 40.2969px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePC\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 83px;\" data-mce-style=\"width: 83px;\"\u003e\n\u003cp style=\"text-align: center;\" align=\"left\" data-mce-style=\"text-align: center;\"\u003eLevel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 90px;\" data-mce-style=\"width: 90px;\"\u003e\n\u003cp align=\"center\"\u003e1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 88px;\" data-mce-style=\"width: 88px;\"\u003e\n\u003cp align=\"center\"\u003e2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 77px;\" data-mce-style=\"width: 77px;\"\u003e\n\u003cp align=\"center\"\u003e2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 58px;\" data-mce-style=\"width: 58px;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 64.7031px;\" data-mce-style=\"width: 64.7031px;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 40.2969px;\" data-mce-style=\"width: 40.2969px;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e\u003cem\u003eLevel Set for Temperature \u0026amp; Humidity Reference Table\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 534px;\" align=\"left\" border=\"1\" cellpadding=\"0\" cellspacing=\"0\" data-mce-style=\"width: 534px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 131px;\" data-mce-style=\"width: 131px;\"\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eLevel\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 125px;\" data-mce-style=\"width: 125px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 135.438px;\" data-mce-style=\"width: 135.438px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e2\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 128.562px;\" data-mce-style=\"width: 128.562px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e3\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 131px;\" data-mce-style=\"width: 131px;\"\u003e\n\u003cp align=\"left\"\u003eHot plate TEMP\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 125px;\" data-mce-style=\"width: 125px;\"\u003e\n\u003cp align=\"center\"\u003e103℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 135.438px;\" data-mce-style=\"width: 135.438px;\"\u003e\n\u003cp align=\"center\"\u003e116℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 128.562px;\" data-mce-style=\"width: 128.562px;\"\u003e\n\u003cp align=\"center\"\u003e118℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 131px;\" data-mce-style=\"width: 131px;\"\u003e\n\u003cp align=\"left\"\u003eInside TEMP\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 125px;\" data-mce-style=\"width: 125px;\"\u003e\n\u003cp align=\"center\"\u003e40℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 135.438px;\" data-mce-style=\"width: 135.438px;\"\u003e\n\u003cp align=\"center\"\u003e50℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 128.562px;\" data-mce-style=\"width: 128.562px;\"\u003e\n\u003cp align=\"center\"\u003e55℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 131px;\" data-mce-style=\"width: 131px;\"\u003e\n\u003cp align=\"left\"\u003eInside humidity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 125px;\" data-mce-style=\"width: 125px;\"\u003e\n\u003cp align=\"center\"\u003e34.2%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 135.438px;\" data-mce-style=\"width: 135.438px;\"\u003e\n\u003cp align=\"center\"\u003e23%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 128.562px;\" data-mce-style=\"width: 128.562px;\"\u003e\n\u003cp align=\"center\"\u003e15%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote: The above data is tested under the conditions of indoor temperature 20℃ and humidity 55%. The temperature and humidity in the box will change slightly due to the different use environment.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 align=\"left\"\u003eHeating Time Setting Mode\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter turning on, press the function key \"M\" four times to switch to the heating time setting mode, the screen displays TIME, and the value displayed now is the remaining heating time in hours. \u003c\/li\u003e\n\u003cli\u003eThe value displayed in TIME mode decreases as time advances, similar to a countdown.\u003c\/li\u003e\n\u003cli\u003eIn TIME mode, press the up or down button to set the heating time, and each press will increase\/decrease by half an hour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eQuestion\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePossible cause\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSolution\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eNot enough drying effect\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eFilaments have serious water absorption or high-temperature filaments (such as nylon, PEEK and other filaments that need high-temperature drying)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eeBOX Lite only has the function of maintaining constant temperature and humidity during printing. It is not suitable for drying filaments with serious water absorption and high temperature (such as nylon, PEEK and other filaments that need high temperature drying). It is not suitable to promote the drying function.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThe screen does not light up, the buttons do not work, do not heat up, and the fan does not work\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eDamaged components\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eQuality problems return to the factory for repair or replacement\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}

ESun EBox Lite Filament Smart Storage & Dryer

$74.99 CAD

The eBOX Lite is a cost-effective storage box with constant temperature and humidity, moisture-proof and dust-proof and heating function specially developed by eSUN for 3D printing filaments. Compared with the old eBOX, eBOX Lite removes the weighing function and improves the cost performance; the upper cover is made of transparent material, whi...


More Info
Sale
eSun eSpool  - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca
{"id":6551748837538,"title":"eSun eSpool - 1kg Reusable Spool for eSun Refilament","handle":"esun-espool-1kg-reusable-spool-for-esun-refilament","description":"\u003cp data-mce-fragment=\"1\" style=\"text-align: center;\"\u003e\u003cstrong\u003eeSUN eSpool is only compatible for the \u003ca href=\"https:\/\/www.digitmakers.ca\/search?type=product\u0026amp;q=refilament\"\u003eeSUN Refilament Series\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith the growing popularity of 3D printing technology, the usage of 3D printing filaments has also increased. The filaments used in FDM 3D printing are mostly spooled, which occupies space and weight. To protect our environment, the detachable and reusable eSpool was designed.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eAdvantages\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUses transparent polycarbonate for high strength and toughness.\u003c\/li\u003e\n\u003cli\u003eSheet body assembly structure: light weight, space saving, transportable, resourceful, reusable and environmentally friendly.\u003c\/li\u003e\n\u003cli\u003eLarge hollow structure: PC can withstand high temperatures, making it convenient for drying conventional and high-performance filaments.\u003c\/li\u003e\n\u003cli\u003eThe packaging bag is made of biodegradable and environmentally friendly PBAT and PLA biological materials, in line with EU export standards.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ctable border=\"1\" dir=\"ltr\" cellpadding=\"0\" cellspacing=\"0\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Features\"}'\u003eFeatures\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Advantage\"}'\u003eAdvantage\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Benefit\"}'\u003eBenefit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"PC material\"}'\u003ePC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"High toughness and strength\"}'\u003eHigh toughness and strength\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Reusable\"}'\u003eReusable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Assembled structure\"}'\u003eAssembled structure\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Saving space\"}'\u003eSaving space\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Save space, convenient transportation, save resources, and environment friendly\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eSave space, convenient transportation, save resources, and environment friendly\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Snap design\"}'\u003eSnap design\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Firm\"}'\u003eFirm\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"No loosening occurs during use\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eNo loosening occurs during use\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"The packaging bag uses PBAT and PLA biological materials\"}'\u003eThe packaging bag uses PBAT and PLA biological materials\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Degradable\"}'\u003eDegradable\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Environmental friendly, in line with EU export standards\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eEnvironmental friendly, in line with EU export standards\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Large hollow structure, PC material\"}'\u003eLarge hollow structure, PC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Breathable and good temperature resistance\"}'\u003eBreathable and good temperature resistance\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Convenient for drying conventional and high-performance filaments.\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eConvenient for drying conventional and high-performance filaments.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"PC material\"}'\u003ePC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Transparent\"}'\u003eTransparent\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Observe the usage of filaments in real time.\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eObserve the usage of filaments in real time.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct patent:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eUtility model (examination); design.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDistinguish the front and back of the eSpool, the side with grooves and label slots is the front side, and the smooth side is the back side.\u003c\/li\u003e\n\u003cli\u003eAlign the 3 tabs of the small piece with the fixing holes and insert them into the back of the disc.\u003c\/li\u003e\n\u003cli\u003ePut the filament into the eSpool.\u003c\/li\u003e\n\u003cli\u003eAlign the other disc with the fixed pillar and press down.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly instructions:  \u003ca href=\"http:\/\/www.esun3d.net\/UploadFiles\/files\/2020\/11\/19\/fd7ee36e7ab549f29a92318d9a61d008.mp4\" target=\"_blank\"\u003e\u003cspan\u003eeSpool uses video​\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-1_480x480.png?v=1614710347\" alt=\"\" width=\"209\" height=\"178\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-1_480x480.png?v=1614710347\"\u003e\u003cimg height=\"212\" width=\"212\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-2_480x480.png?v=1614710378\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-2_480x480.png?v=1614710378\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"205\" width=\"205\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-3_480x480.png?v=1614710427\" alt=\"\"\u003e\u003cimg height=\"213\" width=\"213\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-4_480x480.png?v=1614710465\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-4_480x480.png?v=1614710465\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eQuestions\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003e Possible reasons\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eSolution\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThe latch structure is difficult to insert\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eInserting into the wrong side\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eThe concave side is the outer side of the spool, and the smooth side is the inner side of the spool.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eWhen changing filaments, the remaining filaments are scattered\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eChange filaments without using up\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIt is recommended to use half or more before replacement. Before changing the filament, use a band to pass through the hollow part to bind the remaining filaments.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThe latch structure is difficult to pull out\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHarder to hold by hand\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUse tools, or use greater force to press and pull out\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e NOTE: This is a consumable item that is not under warranty.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/stlfilesforthereusablespoolesun.zip?v=1622236055\"\u003e\u003cstrong\u003eClick here\u003c\/strong\u003e\u003c\/a\u003e if you would like to 3D print the spool (please select Second Generation model)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 19.6px;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/stlfilesforthereusablespoolesun.zip?v=1622236055\"\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/a\u003e\u003c\/span\u003eCommonly purchased together with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-pla-refilament-175-mm-1kg-spool-various-colors?variant=39300531585186\"\u003eeSun Refilament PLA+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-petg-refilament-1-75-mm-1-kg-spooless-various-colors?variant=31380676509827\"\u003eeSun Refilament PETG\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-evacuum-kit-10-vacuum-bags\"\u003eeSun eVacuum Kit (10 Vacuum Bags)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-ebox-filament-storage\"\u003eeSun eBox Filament Smart Storage and Dryer\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2021-03-05T14:17:03-05:00","created_at":"2021-03-02T13:15:32-05:00","vendor":"ESUN","type":"Accessories","tags":["accessories","Box","boxing","dryer","ebox","esun ebox","esun filament","esun refilament","esun refills","Filament","filament dryer","offer","petg refilament","petg refills","petg spooless","pla+ spooless","refilament","Refill","refill coil","refill filament","Spooless"],"price":299,"price_min":299,"price_max":299,"available":true,"price_varies":false,"compare_at_price":399,"compare_at_price_min":399,"compare_at_price_max":399,"compare_at_price_varies":false,"variants":[{"id":39299747512482,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ESUN-SPL-KIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"eSun eSpool - 1kg Reusable Spool for eSun Refilament","public_title":null,"options":["Default Title"],"price":299,"weight":500,"compare_at_price":399,"inventory_quantity":624,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572200760","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/7_49f6b039-d359-476f-a733-8acd269a5a0c.jpg?v=1614711085","\/\/www.digitmakers.ca\/cdn\/shop\/products\/1_c28a93a9-302a-41c4-9da6-88f1f043bfcf.jpg?v=1614710977","\/\/www.digitmakers.ca\/cdn\/shop\/products\/6_6845efc9-a202-490b-a73f-553de86a363e.jpg?v=1614711086","\/\/www.digitmakers.ca\/cdn\/shop\/products\/2_07f79624-7702-4920-bab2-ba17ee6d03ec.jpg?v=1614711085","\/\/www.digitmakers.ca\/cdn\/shop\/products\/4_8aa396ea-2508-4a71-a30b-0719f99d9329.jpg?v=1614711086","\/\/www.digitmakers.ca\/cdn\/shop\/products\/5_365306a2-d0af-4c40-aa3b-6071802ceded.jpg?v=1614711086"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/7_49f6b039-d359-476f-a733-8acd269a5a0c.jpg?v=1614711085","options":["Title"],"media":[{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":20319837683874,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/7_49f6b039-d359-476f-a733-8acd269a5a0c.jpg?v=1614711085"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/7_49f6b039-d359-476f-a733-8acd269a5a0c.jpg?v=1614711085","width":1200},{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":20319811698850,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/1_c28a93a9-302a-41c4-9da6-88f1f043bfcf.jpg?v=1614710977"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/1_c28a93a9-302a-41c4-9da6-88f1f043bfcf.jpg?v=1614710977","width":1200},{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":20319837651106,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/6_6845efc9-a202-490b-a73f-553de86a363e.jpg?v=1614711086"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/6_6845efc9-a202-490b-a73f-553de86a363e.jpg?v=1614711086","width":1200},{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":20319837520034,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/2_07f79624-7702-4920-bab2-ba17ee6d03ec.jpg?v=1614711085"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/2_07f79624-7702-4920-bab2-ba17ee6d03ec.jpg?v=1614711085","width":1200},{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":20319837585570,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/4_8aa396ea-2508-4a71-a30b-0719f99d9329.jpg?v=1614711086"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/4_8aa396ea-2508-4a71-a30b-0719f99d9329.jpg?v=1614711086","width":1200},{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":20319837618338,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/5_365306a2-d0af-4c40-aa3b-6071802ceded.jpg?v=1614711086"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/5_365306a2-d0af-4c40-aa3b-6071802ceded.jpg?v=1614711086","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\" style=\"text-align: center;\"\u003e\u003cstrong\u003eeSUN eSpool is only compatible for the \u003ca href=\"https:\/\/www.digitmakers.ca\/search?type=product\u0026amp;q=refilament\"\u003eeSUN Refilament Series\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith the growing popularity of 3D printing technology, the usage of 3D printing filaments has also increased. The filaments used in FDM 3D printing are mostly spooled, which occupies space and weight. To protect our environment, the detachable and reusable eSpool was designed.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eAdvantages\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUses transparent polycarbonate for high strength and toughness.\u003c\/li\u003e\n\u003cli\u003eSheet body assembly structure: light weight, space saving, transportable, resourceful, reusable and environmentally friendly.\u003c\/li\u003e\n\u003cli\u003eLarge hollow structure: PC can withstand high temperatures, making it convenient for drying conventional and high-performance filaments.\u003c\/li\u003e\n\u003cli\u003eThe packaging bag is made of biodegradable and environmentally friendly PBAT and PLA biological materials, in line with EU export standards.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ctable border=\"1\" dir=\"ltr\" cellpadding=\"0\" cellspacing=\"0\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Features\"}'\u003eFeatures\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Advantage\"}'\u003eAdvantage\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Benefit\"}'\u003eBenefit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"PC material\"}'\u003ePC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"High toughness and strength\"}'\u003eHigh toughness and strength\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Reusable\"}'\u003eReusable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Assembled structure\"}'\u003eAssembled structure\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Saving space\"}'\u003eSaving space\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Save space, convenient transportation, save resources, and environment friendly\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eSave space, convenient transportation, save resources, and environment friendly\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Snap design\"}'\u003eSnap design\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Firm\"}'\u003eFirm\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"No loosening occurs during use\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eNo loosening occurs during use\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"The packaging bag uses PBAT and PLA biological materials\"}'\u003eThe packaging bag uses PBAT and PLA biological materials\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Degradable\"}'\u003eDegradable\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Environmental friendly, in line with EU export standards\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eEnvironmental friendly, in line with EU export standards\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Large hollow structure, PC material\"}'\u003eLarge hollow structure, PC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Breathable and good temperature resistance\"}'\u003eBreathable and good temperature resistance\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Convenient for drying conventional and high-performance filaments.\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eConvenient for drying conventional and high-performance filaments.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"PC material\"}'\u003ePC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Transparent\"}'\u003eTransparent\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Observe the usage of filaments in real time.\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eObserve the usage of filaments in real time.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct patent:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eUtility model (examination); design.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDistinguish the front and back of the eSpool, the side with grooves and label slots is the front side, and the smooth side is the back side.\u003c\/li\u003e\n\u003cli\u003eAlign the 3 tabs of the small piece with the fixing holes and insert them into the back of the disc.\u003c\/li\u003e\n\u003cli\u003ePut the filament into the eSpool.\u003c\/li\u003e\n\u003cli\u003eAlign the other disc with the fixed pillar and press down.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly instructions:  \u003ca href=\"http:\/\/www.esun3d.net\/UploadFiles\/files\/2020\/11\/19\/fd7ee36e7ab549f29a92318d9a61d008.mp4\" target=\"_blank\"\u003e\u003cspan\u003eeSpool uses video​\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-1_480x480.png?v=1614710347\" alt=\"\" width=\"209\" height=\"178\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-1_480x480.png?v=1614710347\"\u003e\u003cimg height=\"212\" width=\"212\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-2_480x480.png?v=1614710378\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-2_480x480.png?v=1614710378\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"205\" width=\"205\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-3_480x480.png?v=1614710427\" alt=\"\"\u003e\u003cimg height=\"213\" width=\"213\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-4_480x480.png?v=1614710465\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-4_480x480.png?v=1614710465\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eQuestions\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003e Possible reasons\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eSolution\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThe latch structure is difficult to insert\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eInserting into the wrong side\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eThe concave side is the outer side of the spool, and the smooth side is the inner side of the spool.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eWhen changing filaments, the remaining filaments are scattered\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eChange filaments without using up\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIt is recommended to use half or more before replacement. Before changing the filament, use a band to pass through the hollow part to bind the remaining filaments.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThe latch structure is difficult to pull out\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHarder to hold by hand\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUse tools, or use greater force to press and pull out\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e NOTE: This is a consumable item that is not under warranty.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/stlfilesforthereusablespoolesun.zip?v=1622236055\"\u003e\u003cstrong\u003eClick here\u003c\/strong\u003e\u003c\/a\u003e if you would like to 3D print the spool (please select Second Generation model)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 19.6px;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/stlfilesforthereusablespoolesun.zip?v=1622236055\"\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/a\u003e\u003c\/span\u003eCommonly purchased together with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-pla-refilament-175-mm-1kg-spool-various-colors?variant=39300531585186\"\u003eeSun Refilament PLA+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-petg-refilament-1-75-mm-1-kg-spooless-various-colors?variant=31380676509827\"\u003eeSun Refilament PETG\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-evacuum-kit-10-vacuum-bags\"\u003eeSun eVacuum Kit (10 Vacuum Bags)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-ebox-filament-storage\"\u003eeSun eBox Filament Smart Storage and Dryer\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"}

eSun eSpool - 1kg Reusable Spool for eSun Refilament

$2.99 CAD

eSUN eSpool is only compatible for the eSUN Refilament Series With the growing popularity of 3D printing technology, the usage of 3D printing filaments has also increased. The filaments used in FDM 3D printing are mostly spooled, which occupies space and weight. To protect our environment, the detachable and reusable eSpool was designed.   Advan...


More Info
{"id":4093196238884,"title":"Polymaker PolyBox Edition II Filament Dry Box","handle":"polymaker-polybox-edition-2-filament-dry-box","description":"\u003ch3\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/h3\u003e\n\u003ch2\u003e\u003cspan\u003ePolyBox™ is a filament storage box that allows you to store your materials in their optimum printing environment while still being able to print with them.\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ciframe width=\"500\" height=\"300\" src=\"https:\/\/www.youtube.com\/embed\/41XlPb3fLR8\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003cspan\u003ePolyBox™ is a filament storage box that allows you to store your materials in \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003cspan\u003etheir optimum printing environment while still being able to print with them.\u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003ePolyBox™ features a thermo-hygrometer to monitor your filaments inside the box. The humidity is regulated by large desiccant bags which absorb moisture\u003c\/span\u003e\u003cspan\u003e from the air inside the PolyBox™, specifically designed for hygroscopic materials \u003c\/span\u003e\u003cspan\u003esuch as PolySmooth™, PVA or Nylon. The PolyBox™ can house two 1kg spools simultaneously or one 3kg spool and is compatible with both 1.75mm \u003c\/span\u003e\u003cspan\u003ea\u003c\/span\u003e\u003cspan\u003end 2.85mm filament diameters.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"vc_col-sm-6 wpb_column vc_column_container\"\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e\n\u003cdiv class=\"wpb_text_column wpb_content_element \"\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e\n\u003cp\u003e\u003cstrong\u003eDesiccant type    \u003c\/strong\u003e                                     Silica gel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesiccant specifications  \u003c\/strong\u003e                    4*Desiccant sachets 100g\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupported filament spools \u003c\/strong\u003e                2 spools ≤ 1kg or 1 spool 3kg\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHumidity range\u003c\/strong\u003e                                      10-99%\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccuracy\u003c\/strong\u003e                                                  ±5%\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResolution  \u003c\/strong\u003e                                             1%\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResponse   \u003c\/strong\u003e                                              10 seconds\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTemperature range \u003c\/strong\u003e                            -50~70 °C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccuracy \u003c\/strong\u003e                                                 ±1 °C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBattery specifications \u003c\/strong\u003e                         LR44*1\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct size\u003c\/strong\u003e                                           315(L)*190(W)*310(H)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage size  \u003c\/strong\u003e                                        196(L)*320(W)*320(H)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct weight (without\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003edesiccants and wires) \u003c\/strong\u003e                         1.150kgs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage weight \u003c\/strong\u003e                                    1.700kgs\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"vc_col-sm-6 wpb_column vc_column_container\"\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e\n\u003cdiv class=\"wpb_text_column wpb_content_element \"\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/PolyBox-Poster-1_large.jpg?v=1529503938\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/PolyBox-2_large.png?v=1529503144\" alt=\"Bolybox\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/PolyBox-3_large.png?v=1529503845\" alt=\"Plybox dimension\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2019-09-13T12:28:50-04:00","created_at":"2019-09-13T11:19:50-04:00","vendor":"Polymaker","type":"Accessories","tags":["Box","Filament","filament dry","filament dryer","New Arrival","new-arrivals","Poly","polybox","polymaker","polymaker polybox","polysher"],"price":8495,"price_min":8495,"price_max":8495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30082929655844,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PLMK-PLBX-II-FLDB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polymaker PolyBox Edition II Filament Dry Box","public_title":null,"options":["Default Title"],"price":8495,"weight":5000,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936701804","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/Polymaker-PolyBox-3D-Printer-Filament-Dry-Box-Canada_large_881e3c9c-7f05-4de5-b40b-509258438b2f.jpg?v=1594465832"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Polymaker-PolyBox-3D-Printer-Filament-Dry-Box-Canada_large_881e3c9c-7f05-4de5-b40b-509258438b2f.jpg?v=1594465832","options":["Title"],"media":[{"alt":"Polymaker PolyBox Edition II Filament Dry Box - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":2022452428931,"position":1,"preview_image":{"aspect_ratio":1.0,"height":480,"width":480,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Polymaker-PolyBox-3D-Printer-Filament-Dry-Box-Canada_large_881e3c9c-7f05-4de5-b40b-509258438b2f.jpg?v=1594465832"},"aspect_ratio":1.0,"height":480,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Polymaker-PolyBox-3D-Printer-Filament-Dry-Box-Canada_large_881e3c9c-7f05-4de5-b40b-509258438b2f.jpg?v=1594465832","width":480}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/h3\u003e\n\u003ch2\u003e\u003cspan\u003ePolyBox™ is a filament storage box that allows you to store your materials in their optimum printing environment while still being able to print with them.\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ciframe width=\"500\" height=\"300\" src=\"https:\/\/www.youtube.com\/embed\/41XlPb3fLR8\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003cspan\u003ePolyBox™ is a filament storage box that allows you to store your materials in \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003cspan\u003etheir optimum printing environment while still being able to print with them.\u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003ePolyBox™ features a thermo-hygrometer to monitor your filaments inside the box. The humidity is regulated by large desiccant bags which absorb moisture\u003c\/span\u003e\u003cspan\u003e from the air inside the PolyBox™, specifically designed for hygroscopic materials \u003c\/span\u003e\u003cspan\u003esuch as PolySmooth™, PVA or Nylon. The PolyBox™ can house two 1kg spools simultaneously or one 3kg spool and is compatible with both 1.75mm \u003c\/span\u003e\u003cspan\u003ea\u003c\/span\u003e\u003cspan\u003end 2.85mm filament diameters.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"vc_col-sm-6 wpb_column vc_column_container\"\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e\n\u003cdiv class=\"wpb_text_column wpb_content_element \"\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e\n\u003cp\u003e\u003cstrong\u003eDesiccant type    \u003c\/strong\u003e                                     Silica gel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesiccant specifications  \u003c\/strong\u003e                    4*Desiccant sachets 100g\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupported filament spools \u003c\/strong\u003e                2 spools ≤ 1kg or 1 spool 3kg\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHumidity range\u003c\/strong\u003e                                      10-99%\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccuracy\u003c\/strong\u003e                                                  ±5%\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResolution  \u003c\/strong\u003e                                             1%\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResponse   \u003c\/strong\u003e                                              10 seconds\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTemperature range \u003c\/strong\u003e                            -50~70 °C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccuracy \u003c\/strong\u003e                                                 ±1 °C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBattery specifications \u003c\/strong\u003e                         LR44*1\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct size\u003c\/strong\u003e                                           315(L)*190(W)*310(H)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage size  \u003c\/strong\u003e                                        196(L)*320(W)*320(H)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct weight (without\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003edesiccants and wires) \u003c\/strong\u003e                         1.150kgs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage weight \u003c\/strong\u003e                                    1.700kgs\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"vc_col-sm-6 wpb_column vc_column_container\"\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e\n\u003cdiv class=\"wpb_text_column wpb_content_element \"\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/PolyBox-Poster-1_large.jpg?v=1529503938\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/PolyBox-2_large.png?v=1529503144\" alt=\"Bolybox\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/PolyBox-3_large.png?v=1529503845\" alt=\"Plybox dimension\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

Polymaker PolyBox Edition II Filament Dry Box

$84.95 CAD

  PolyBox™ is a filament storage box that allows you to store your materials in their optimum printing environment while still being able to print with them.  PolyBox™ is a filament storage box that allows you to store your materials in their optimum printing environment while still being able to print with them. PolyBox™ features a thermo-hyg...


More Info
Sold Out
PrintDry Filament Dryer PRO - Digitmakers.ca
PrintDry Filament Dryer PRO

Accessories

$199.00 CAD
{"id":6057184755874,"title":"PrintDry Filament Dryer PRO","handle":"printdry-filament-dryer-pro","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eIt’s the ultimate filament dryer you need for quality 3D printing!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"357\" width=\"444\" src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/PrintDry_dryer_2-scaled-e1600107031380-1024x824.jpg\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/PrintDry_dryer_2-scaled-e1600107031380-1024x824.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"271\" width=\"484\" src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/features.jpg\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/features.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOutside Dimension:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e 340mm (L) x 285mm (W) x 350mm (H)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e8 lbs\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan data-mce-fragment=\"1\"\u003eDigital Display\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-1024x569.jpg\" width=\"495\" height=\"275\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-1024x569.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasily adjust the temperature with 5 presets (35ºC, 45ºC, 55ºC, 65ºC, and 75ºC).\u003c\/li\u003e\n\u003cli\u003eBuilt-in timer with a maximum time of 48 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDouble-wall Structure\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s.jpg\" width=\"472\" height=\"359\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 id=\"h:spool-adapter-includ\" class=\"page-anchor\"\u003e\n\u003cspan class=\"bold\"\u003eSpool Adapter\u003c\/span\u003e Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 metal shafts\u003c\/li\u003e\n\u003cli\u003e4 big spool adapters\u003c\/li\u003e\n\u003cli\u003e4 small spool adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/spool-adaptors-1024x683.jpg\" width=\"420\" height=\"280\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/spool-adaptors-1024x683.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2021-09-02T14:32:05-04:00","created_at":"2021-01-13T14:37:53-05:00","vendor":"Printdry","type":"Accessories","tags":["Box","dryer","Filament","filament dryer","new-arrivals","printdry","printdry pro"],"price":19900,"price_min":19900,"price_max":19900,"available":false,"price_varies":false,"compare_at_price":22500,"compare_at_price_min":22500,"compare_at_price_max":22500,"compare_at_price_varies":false,"variants":[{"id":37538371698850,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PNTDRY-DYER-PRO","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"PrintDry Filament Dryer PRO","public_title":null,"options":["Default Title"],"price":19900,"weight":7000,"compare_at_price":22500,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"628011798015","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/printdryfilamentdryerpro.jpg?v=1630543692","\/\/www.digitmakers.ca\/cdn\/shop\/products\/PrintDry_dryer_2-scaled-e1600107031380-1024x824.jpg?v=1630607203"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/printdryfilamentdryerpro.jpg?v=1630543692","options":["Title"],"media":[{"alt":"PrintDry Filament Dryer PRO - Digitmakers.ca","id":13310731026594,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/printdryfilamentdryerpro.jpg?v=1630543692"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/printdryfilamentdryerpro.jpg?v=1630543692","width":600},{"alt":"PrintDry Filament Dryer PRO - Digitmakers.ca","id":23241761783970,"position":2,"preview_image":{"aspect_ratio":1.243,"height":824,"width":1024,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/PrintDry_dryer_2-scaled-e1600107031380-1024x824.jpg?v=1630607203"},"aspect_ratio":1.243,"height":824,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/PrintDry_dryer_2-scaled-e1600107031380-1024x824.jpg?v=1630607203","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eIt’s the ultimate filament dryer you need for quality 3D printing!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"357\" width=\"444\" src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/PrintDry_dryer_2-scaled-e1600107031380-1024x824.jpg\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/PrintDry_dryer_2-scaled-e1600107031380-1024x824.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"271\" width=\"484\" src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/features.jpg\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/features.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eOutside Dimension:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e 340mm (L) x 285mm (W) x 350mm (H)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003e8 lbs\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan data-mce-fragment=\"1\"\u003eDigital Display\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-1024x569.jpg\" width=\"495\" height=\"275\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-1024x569.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasily adjust the temperature with 5 presets (35ºC, 45ºC, 55ºC, 65ºC, and 75ºC).\u003c\/li\u003e\n\u003cli\u003eBuilt-in timer with a maximum time of 48 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDouble-wall Structure\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s.jpg\" width=\"472\" height=\"359\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 id=\"h:spool-adapter-includ\" class=\"page-anchor\"\u003e\n\u003cspan class=\"bold\"\u003eSpool Adapter\u003c\/span\u003e Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 metal shafts\u003c\/li\u003e\n\u003cli\u003e4 big spool adapters\u003c\/li\u003e\n\u003cli\u003e4 small spool adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/spool-adaptors-1024x683.jpg\" width=\"420\" height=\"280\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/spool-adaptors-1024x683.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

PrintDry Filament Dryer PRO

$199.00 CAD

It’s the ultimate filament dryer you need for quality 3D printing! Outside Dimension:  340mm (L) x 285mm (W) x 350mm (H) Weight 8 lbs Digital Display Easily adjust the temperature with 5 presets (35ºC, 45ºC, 55ºC, 65ºC, and 75ºC). Built-in timer with a maximum time of 48 hours.   Double-wall Structure   Spool Adapter Included 2...


More Info
PrintDry Filament Dryer PRO3

Accessories

$245.00 CAD
{"id":8233260941542,"title":"PrintDry Filament Dryer PRO3","handle":"printdry-filament-dryer-pro3","description":"\u003cul\u003e\n\u003cli\u003eEasily adjust the temperature with 6 presets (35ºC, 45ºC, 55ºC, 65ºC, 75ºC, and 85ºC).\u003c\/li\u003e\n\u003cli\u003eBuilt-in timer with a maximum time of 48 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-eleid=\"2\" class=\"rich-text-paragraph\"\u003e\n\u003cspan data-eleid=\"3\" class=\"text-only\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe temperature readings are directly measured at the tip of the temperature sensor, located about 15 mm away from the hot air vent.\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan data-eleid=\"18\" class=\"text-only\"\u003eThe temperature distribution inside the dryer is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003euniform. The temperature in a place close to the hot air vent is higher and the temperature in a place far away from the hot air vent is lower.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt’s the ultimate filament dryer you need for quality 3D printing!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg loading=\"lazy\" class=\"aligncenter size-full wp-image-6497\" src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2.jpg\" alt=\"\" width=\"515\" height=\"690\" srcset=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2.jpg 708w, https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2-224x300.jpg 224w, https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2-18x24.jpg 18w, https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2-27x36.jpg 27w, https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2-36x48.jpg 36w, https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2-600x803.jpg 600w, https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2-150x200.jpg 150w\" sizes=\"(max-width: 708px) 100vw, 708px\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2.jpg\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch1 id=\"h:vertical-mounting\" class=\"page-anchor\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"bold\" data-mce-fragment=\"1\"\u003e Digital Display\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg loading=\"lazy\" class=\"aligncenter wp-image-2972\" src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-1024x569.jpg\" alt=\"\" width=\"520\" height=\"289\" srcset=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-1024x569.jpg 1024w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-600x333.jpg 600w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-300x167.jpg 300w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-768x427.jpg 768w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-1170x650.jpg 1170w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display.jpg 1440w\" sizes=\"(max-width: 591px) 100vw, 591px\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-1024x569.jpg\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasily adjust the temperature with 6 presets (35ºC, 45ºC, 55ºC, 65ºC, 75ºC, and 85ºC).\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuilt-in timer with a maximum time of 48 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"rich-text-paragraph\" data-eleid=\"2\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"text-only\" data-eleid=\"3\" data-mce-fragment=\"1\"\u003eThe temperature readings are directly measured at the tip of the temperature sensor located about 15 mm away from the hot air vent under the following conditions.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"rich-text-paragraph\" data-eleid=\"4\" data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cul class=\"richTextDocs-unOrderList richTextDocs-unOrderList-disc\" data-eleid=\"5\" data-mce-fragment=\"1\"\u003e\n\u003cli class=\"richTextDocs-listItem\" data-eleid=\"6\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"richTextDocs-listItem__text\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"text-only\" data-eleid=\"7\" data-mce-fragment=\"1\"\u003eAmbient temperature is at 22C.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"richTextDocs-listItem\" data-eleid=\"10\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"richTextDocs-listItem__text\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"text-only\" data-eleid=\"11\" data-mce-fragment=\"1\"\u003eThere are two full filament spools inside the dryer.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"richTextDocs-listItem\" data-eleid=\"14\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"richTextDocs-listItem__text\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"text-only\" data-eleid=\"15\" data-mce-fragment=\"1\"\u003eThe dryer has been running at the set temperature for at least 1 hour\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"rich-text-paragraph\" data-eleid=\"17\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"text-only\" data-eleid=\"18\" data-mce-fragment=\"1\"\u003eThe temperature distribution inside the dryer is\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOT\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003euniform. The temperature in a place close to the hot air vent is higher and the temperature in a place far away from the hot air vent is lower.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"rich-text-paragraph\" data-eleid=\"19\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"text-only\" data-eleid=\"20\" data-mce-fragment=\"1\"\u003eFor example, under about conditions and the dryer temperature is set at 85C, the temperature at the tip of temp sensor will be 85-92C and the temperature right under the lid will be around 70C.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 id=\"h:vertical-mounting\" class=\"page-anchor\" data-mce-fragment=\"1\"\u003e Double-wall Structure\u003c\/h1\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg loading=\"lazy\" class=\"aligncenter size-full wp-image-4128\" src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s.jpg\" alt=\"\" width=\"535\" height=\"407\" srcset=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s.jpg 800w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s-600x456.jpg 600w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s-300x228.jpg 300w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s-768x584.jpg 768w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s-24x18.jpg 24w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s-36x27.jpg 36w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s-48x36.jpg 48w\" sizes=\"(max-width: 800px) 100vw, 800px\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s.jpg\"\u003e\u003c\/p\u003e\n\u003ch1 id=\"h:spool-adapter-includ\" class=\"page-anchor\" data-mce-fragment=\"1\"\u003e \u003cspan class=\"bold\" data-mce-fragment=\"1\"\u003eSpool Adapter\u003c\/span\u003e included\u003c\/h1\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2 metal shafts\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4 big spool adapters\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4 small spool adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg loading=\"lazy\" class=\"aligncenter size-full wp-image-4442\" src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss.jpg\" alt=\"\" width=\"542\" height=\"362\" srcset=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss.jpg 1000w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss-600x401.jpg 600w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss-300x200.jpg 300w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss-768x513.jpg 768w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss-24x16.jpg 24w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss-36x24.jpg 36w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss-48x32.jpg 48w\" sizes=\"(max-width: 1000px) 100vw, 1000px\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss.jpg\"\u003e\u003c\/p\u003e","published_at":"2023-06-21T15:19:31-04:00","created_at":"2023-06-21T15:10:42-04:00","vendor":"Printdry","type":"Accessories","tags":["Box","dryer","Filament","filament dryer","new-arrivals","printdry","printdry pro","printdrypro3","Pro3"],"price":24500,"price_min":24500,"price_max":24500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43812218503398,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PNTDRY-DYER-PRO3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PrintDry Filament Dryer PRO3","public_title":null,"options":["Default Title"],"price":24500,"weight":10000,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"628011798022","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/files\/printdrypro3.jpg?v=1687375119"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/printdrypro3.jpg?v=1687375119","options":["Title"],"media":[{"alt":"PrintDry Filament Dryer PRO3 - Digitmakers.ca","id":32226283028710,"position":1,"preview_image":{"aspect_ratio":1.25,"height":800,"width":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/printdrypro3.jpg?v=1687375119"},"aspect_ratio":1.25,"height":800,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/printdrypro3.jpg?v=1687375119","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eEasily adjust the temperature with 6 presets (35ºC, 45ºC, 55ºC, 65ºC, 75ºC, and 85ºC).\u003c\/li\u003e\n\u003cli\u003eBuilt-in timer with a maximum time of 48 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-eleid=\"2\" class=\"rich-text-paragraph\"\u003e\n\u003cspan data-eleid=\"3\" class=\"text-only\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe temperature readings are directly measured at the tip of the temperature sensor, located about 15 mm away from the hot air vent.\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan data-eleid=\"18\" class=\"text-only\"\u003eThe temperature distribution inside the dryer is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003euniform. The temperature in a place close to the hot air vent is higher and the temperature in a place far away from the hot air vent is lower.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt’s the ultimate filament dryer you need for quality 3D printing!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg loading=\"lazy\" class=\"aligncenter size-full wp-image-6497\" src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2.jpg\" alt=\"\" width=\"515\" height=\"690\" srcset=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2.jpg 708w, https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2-224x300.jpg 224w, https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2-18x24.jpg 18w, https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2-27x36.jpg 27w, https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2-36x48.jpg 36w, https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2-600x803.jpg 600w, https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2-150x200.jpg 150w\" sizes=\"(max-width: 708px) 100vw, 708px\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2022\/12\/features2.jpg\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch1 id=\"h:vertical-mounting\" class=\"page-anchor\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"bold\" data-mce-fragment=\"1\"\u003e Digital Display\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg loading=\"lazy\" class=\"aligncenter wp-image-2972\" src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-1024x569.jpg\" alt=\"\" width=\"520\" height=\"289\" srcset=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-1024x569.jpg 1024w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-600x333.jpg 600w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-300x167.jpg 300w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-768x427.jpg 768w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-1170x650.jpg 1170w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display.jpg 1440w\" sizes=\"(max-width: 591px) 100vw, 591px\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/01\/display-1024x569.jpg\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasily adjust the temperature with 6 presets (35ºC, 45ºC, 55ºC, 65ºC, 75ºC, and 85ºC).\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuilt-in timer with a maximum time of 48 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"rich-text-paragraph\" data-eleid=\"2\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"text-only\" data-eleid=\"3\" data-mce-fragment=\"1\"\u003eThe temperature readings are directly measured at the tip of the temperature sensor located about 15 mm away from the hot air vent under the following conditions.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"rich-text-paragraph\" data-eleid=\"4\" data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cul class=\"richTextDocs-unOrderList richTextDocs-unOrderList-disc\" data-eleid=\"5\" data-mce-fragment=\"1\"\u003e\n\u003cli class=\"richTextDocs-listItem\" data-eleid=\"6\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"richTextDocs-listItem__text\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"text-only\" data-eleid=\"7\" data-mce-fragment=\"1\"\u003eAmbient temperature is at 22C.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"richTextDocs-listItem\" data-eleid=\"10\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"richTextDocs-listItem__text\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"text-only\" data-eleid=\"11\" data-mce-fragment=\"1\"\u003eThere are two full filament spools inside the dryer.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"richTextDocs-listItem\" data-eleid=\"14\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"richTextDocs-listItem__text\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"text-only\" data-eleid=\"15\" data-mce-fragment=\"1\"\u003eThe dryer has been running at the set temperature for at least 1 hour\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"rich-text-paragraph\" data-eleid=\"17\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"text-only\" data-eleid=\"18\" data-mce-fragment=\"1\"\u003eThe temperature distribution inside the dryer is\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOT\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003euniform. The temperature in a place close to the hot air vent is higher and the temperature in a place far away from the hot air vent is lower.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"rich-text-paragraph\" data-eleid=\"19\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"text-only\" data-eleid=\"20\" data-mce-fragment=\"1\"\u003eFor example, under about conditions and the dryer temperature is set at 85C, the temperature at the tip of temp sensor will be 85-92C and the temperature right under the lid will be around 70C.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch1 id=\"h:vertical-mounting\" class=\"page-anchor\" data-mce-fragment=\"1\"\u003e Double-wall Structure\u003c\/h1\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg loading=\"lazy\" class=\"aligncenter size-full wp-image-4128\" src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s.jpg\" alt=\"\" width=\"535\" height=\"407\" srcset=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s.jpg 800w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s-600x456.jpg 600w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s-300x228.jpg 300w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s-768x584.jpg 768w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s-24x18.jpg 24w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s-36x27.jpg 36w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s-48x36.jpg 48w\" sizes=\"(max-width: 800px) 100vw, 800px\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/IMG_6845s.jpg\"\u003e\u003c\/p\u003e\n\u003ch1 id=\"h:spool-adapter-includ\" class=\"page-anchor\" data-mce-fragment=\"1\"\u003e \u003cspan class=\"bold\" data-mce-fragment=\"1\"\u003eSpool Adapter\u003c\/span\u003e included\u003c\/h1\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2 metal shafts\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4 big spool adapters\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4 small spool adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg loading=\"lazy\" class=\"aligncenter size-full wp-image-4442\" src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss.jpg\" alt=\"\" width=\"542\" height=\"362\" srcset=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss.jpg 1000w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss-600x401.jpg 600w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss-300x200.jpg 300w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss-768x513.jpg 768w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss-24x16.jpg 24w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss-36x24.jpg 36w, https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss-48x32.jpg 48w\" sizes=\"(max-width: 1000px) 100vw, 1000px\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.printdry.com\/wp-content\/uploads\/2020\/02\/Spool-adapterss.jpg\"\u003e\u003c\/p\u003e"}

PrintDry Filament Dryer PRO3

$245.00 CAD

Easily adjust the temperature with 6 presets (35ºC, 45ºC, 55ºC, 65ºC, 75ºC, and 85ºC). Built-in timer with a maximum time of 48 hours. Note: The temperature readings are directly measured at the tip of the temperature sensor, located about 15 mm away from the hot air vent. The temperature distribution inside the dryer is NOT uniform. The temp...


More Info
Sold Out
PrintDry Large Spool Kit (Double-wall) For Print Dry Filament Dryer Pro/Pro3 - Digitmakers.ca
{"id":8233277587686,"title":"PrintDry Large Spool Kit (Double-wall) For Print Dry Filament Dryer Pro\/Pro3","handle":"printdry-large-spool-kit-double-wall-for-print-dry-filament-dryer-pro-pro3","description":"\u003cp\u003eAdditional Chamber Kit (double-wall) for PrintDry Filament Dryer PRO\/PRO3\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDouble-wall\u003c\/li\u003e\n\u003cli\u003eUsed with the PrintDry Filament Dryer PRO3.\u003c\/li\u003e\n\u003cli\u003eTo dry and feed two more additional spools with max 200mm or 8″ spool outside diameter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDue to the stackable chamber design, you can use multiple additional chamber kits per dryer; however, the temperature and stability decrease as you add more chambers. We don’t recommend using more than two additional chamber kits per dryer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-06-27T12:00:50-04:00","created_at":"2023-06-21T15:29:07-04:00","vendor":"Printdry","type":"Accessories","tags":["Box","dryer","Filament","filament dryer","filament spool holder","Large spool kit","new-arrivals","printdry","printdry filament spool holder","printdry pro","spool holder","Spool holder kit","spool kit"],"price":4100,"price_min":4100,"price_max":4100,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43812232069350,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PNTDRY-LRG-DYER","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"PrintDry Large Spool Kit (Double-wall) For Print Dry Filament Dryer Pro\/Pro3","public_title":null,"options":["Default Title"],"price":4100,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"628011798213","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/files\/IMG_2860.png?v=1687881520"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/IMG_2860.png?v=1687881520","options":["Title"],"media":[{"alt":"PrintDry Large Spool Kit (Double-wall) For Print Dry Filament Dryer Pro\/Pro3 - Digitmakers.ca","id":32240183214310,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/IMG_2860.png?v=1687881520"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/files\/IMG_2860.png?v=1687881520","width":2048}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eAdditional Chamber Kit (double-wall) for PrintDry Filament Dryer PRO\/PRO3\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDouble-wall\u003c\/li\u003e\n\u003cli\u003eUsed with the PrintDry Filament Dryer PRO3.\u003c\/li\u003e\n\u003cli\u003eTo dry and feed two more additional spools with max 200mm or 8″ spool outside diameter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDue to the stackable chamber design, you can use multiple additional chamber kits per dryer; however, the temperature and stability decrease as you add more chambers. We don’t recommend using more than two additional chamber kits per dryer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

PrintDry Large Spool Kit (Double-wall) For Print Dry Filament Dryer Pro/Pro3

$41.00 CAD

Additional Chamber Kit (double-wall) for PrintDry Filament Dryer PRO/PRO3 Double-wall Used with the PrintDry Filament Dryer PRO3. To dry and feed two more additional spools with max 200mm or 8″ spool outside diameter. Note: Due to the stackable chamber design, you can use multiple additional chamber kits per dryer; however, the temperature and...


More Info
{"id":7062388244642,"title":"PrintDry Smart Vacuum Filament Container","handle":"printdry-smart-vacuum-filament-container","description":"\u003ch3\u003e\u003cspan data-mce-fragment=\"1\"\u003eOne-Touch Sealing \u0026amp; Auto Re-Sealing -- Smart Filament Storage Solution\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cimg data-mce-fragment=\"1\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/712\/591\/5e6ed35091a210ec3830024cfa27ecfd_original.jpg?ixlib=rb-4.0.2\u0026amp;crop=faces\u0026amp;w=1552\u0026amp;h=873\u0026amp;fit=crop\u0026amp;v=1615567072\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=7aca07c7c7418788f2fd11b6a313f0b5\" alt=\"One-Touch Sealing \u0026amp; Auto Re-Sealing -- Smart Filament Storage Solution\" width=\"487\" height=\"274\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/712\/591\/5e6ed35091a210ec3830024cfa27ecfd_original.jpg?ixlib=rb-4.0.2\u0026amp;crop=faces\u0026amp;w=1552\u0026amp;h=873\u0026amp;fit=crop\u0026amp;v=1615567072\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=7aca07c7c7418788f2fd11b6a313f0b5\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003ePrintDry\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e is proud to announce our newest filament storage solution -- a SMART solution!  With a built-in vacuum pump and a rechargeable battery, this filament container can be vacuum sealed by pushing ONE button.  No more manual pumps. More importantly, we also integrated a re-sealing sensor inside, which constantly monitors the vacuum level and will automatically activate the vacuum pump once the vacuum level drops.   This prevents leakage over an extended period of time.  \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003eStore your filament easily\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003ewithout\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003eworrying about the leaks.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ciframe data-mce-fragment=\"1\" width=\"500\" height=\"300\" src=\"https:\/\/www.youtube.com\/embed\/gvXUXs0wdp0\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/gvXUXs0wdp0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"496\" width=\"461\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/674\/804\/69a8ac48b4207b2576c8e0c53fc439f5_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1622127164\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=b0add0b1d758664ccd2111fa3e13ca21\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eWhy vacuum storage is important for filament?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eExcess moisture in filament leads to defects in 3D printing. If some of your prints look like the pictures below, this may be due to water content built-up in the filament. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"122\" width=\"491\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/429\/763\/be30f7b2a83ad652798dff2779e0c7ca_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613686666\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=d6ae966af4c8ef0580bda8028232c08c\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur Journey\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"216\" width=\"414\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/712\/846\/ab56d123491bddef7e769fdac317f07f_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1615568108\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=001bc09e37553b6a528769eee1f8264c\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur current vacuum filament container uses a hand pump to create a vacuum. It's done manually but it works. However, it doesn't know if there is a leakage which will compromise the seal over time. As the result, the filament will absorb moisture slowly which can affect your print. So we came up with our smart vacuum filament container.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eOne Touch Sealing\/Open\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"381\" width=\"487\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/474\/764\/68f75cfd4e3d1d7fd384e3112b34febf_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620753131\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=76fa1f06d9f8481408c1ac1fc4d04554\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eHold Up To 3 Spools \u003cbr\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cimg height=\"315\" width=\"466\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/696\/573\/9165ccc2d9658dc110526de68a4d8fa2_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1615472692\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=4deaa8e37d8e40dc343e427cc0c14a26\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e Rechargeable Battery\u003c\/h2\u003e\n\u003cp\u003eThe battery last about 2 months if only opening and closing once a day.\u003c\/p\u003e\n\u003cp\u003e\u003cimg data-mce-fragment=\"1\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/432\/917\/7635b26eb939d284e9a9225ac351d032_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620421679\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=4a5640ad6238488de68e47ab4ce56f22\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/432\/917\/7635b26eb939d284e9a9225ac351d032_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620421679\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=4a5640ad6238488de68e47ab4ce56f22\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eAdditional Features:\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/462\/701\/8eaf3b559f2f7a91380b5fdf741fb637_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620676772\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=8f14be9f3d8ecd11c28191342c9b8ea2\" width=\"493\" height=\"542\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/580\/994\/e2822d14628bc7534290b3571bd912c0_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1614717152\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=550061f62f37f2fc005266e3db0c5ef6\" width=\"483\" height=\"516\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eLong-lasting design\u003c\/h3\u003e\n\u003cp class=\"mb2 text-preline\"\u003eExtra thick wall is used.\u003c\/p\u003e\n\u003ch3\u003eReusability and recyclability\u003c\/h3\u003e\n\u003cp class=\"mb2 text-preline\"\u003eThe container body is 100% recyclable.\u003c\/p\u003e\n\u003ch3\u003eEnvironmentally friendly factories\u003c\/h3\u003e\n\u003cp class=\"mb2 text-preline\"\u003eSolar panels are partially providing the power to our factory.\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e","published_at":"2021-09-02T15:32:59-04:00","created_at":"2021-09-02T14:32:46-04:00","vendor":"Printdry","type":"Accessories","tags":["accessories","Box","dryer","Filament","filament dryer","new-arrivals","printdry","vacuum","vacuum container","vacuum seal"],"price":13999,"price_min":13999,"price_max":13999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40788040777890,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRNTDRY-SMRT-VAC-CNTR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PrintDry Smart Vacuum Filament Container","public_title":null,"options":["Default Title"],"price":13999,"weight":7000,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":"628011798176","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/Untitled-2_83540c7a-d2e0-4df4-ad3c-f1d511e65e83.jpg?v=1630610975"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Untitled-2_83540c7a-d2e0-4df4-ad3c-f1d511e65e83.jpg?v=1630610975","options":["Title"],"media":[{"alt":"PrintDry Smart Vacuum Filament Container - Digitmakers.ca","id":23242245406882,"position":1,"preview_image":{"aspect_ratio":1.063,"height":873,"width":928,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Untitled-2_83540c7a-d2e0-4df4-ad3c-f1d511e65e83.jpg?v=1630610975"},"aspect_ratio":1.063,"height":873,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Untitled-2_83540c7a-d2e0-4df4-ad3c-f1d511e65e83.jpg?v=1630610975","width":928}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e\u003cspan data-mce-fragment=\"1\"\u003eOne-Touch Sealing \u0026amp; Auto Re-Sealing -- Smart Filament Storage Solution\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cimg data-mce-fragment=\"1\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/712\/591\/5e6ed35091a210ec3830024cfa27ecfd_original.jpg?ixlib=rb-4.0.2\u0026amp;crop=faces\u0026amp;w=1552\u0026amp;h=873\u0026amp;fit=crop\u0026amp;v=1615567072\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=7aca07c7c7418788f2fd11b6a313f0b5\" alt=\"One-Touch Sealing \u0026amp; Auto Re-Sealing -- Smart Filament Storage Solution\" width=\"487\" height=\"274\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/712\/591\/5e6ed35091a210ec3830024cfa27ecfd_original.jpg?ixlib=rb-4.0.2\u0026amp;crop=faces\u0026amp;w=1552\u0026amp;h=873\u0026amp;fit=crop\u0026amp;v=1615567072\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=7aca07c7c7418788f2fd11b6a313f0b5\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003ePrintDry\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e is proud to announce our newest filament storage solution -- a SMART solution!  With a built-in vacuum pump and a rechargeable battery, this filament container can be vacuum sealed by pushing ONE button.  No more manual pumps. More importantly, we also integrated a re-sealing sensor inside, which constantly monitors the vacuum level and will automatically activate the vacuum pump once the vacuum level drops.   This prevents leakage over an extended period of time.  \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003eStore your filament easily\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003ewithout\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003eworrying about the leaks.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ciframe data-mce-fragment=\"1\" width=\"500\" height=\"300\" src=\"https:\/\/www.youtube.com\/embed\/gvXUXs0wdp0\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/gvXUXs0wdp0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"496\" width=\"461\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/674\/804\/69a8ac48b4207b2576c8e0c53fc439f5_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1622127164\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=b0add0b1d758664ccd2111fa3e13ca21\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eWhy vacuum storage is important for filament?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eExcess moisture in filament leads to defects in 3D printing. If some of your prints look like the pictures below, this may be due to water content built-up in the filament. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"122\" width=\"491\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/429\/763\/be30f7b2a83ad652798dff2779e0c7ca_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613686666\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=d6ae966af4c8ef0580bda8028232c08c\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur Journey\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"216\" width=\"414\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/712\/846\/ab56d123491bddef7e769fdac317f07f_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1615568108\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=001bc09e37553b6a528769eee1f8264c\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur current vacuum filament container uses a hand pump to create a vacuum. It's done manually but it works. However, it doesn't know if there is a leakage which will compromise the seal over time. As the result, the filament will absorb moisture slowly which can affect your print. So we came up with our smart vacuum filament container.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eOne Touch Sealing\/Open\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"381\" width=\"487\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/474\/764\/68f75cfd4e3d1d7fd384e3112b34febf_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620753131\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=76fa1f06d9f8481408c1ac1fc4d04554\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eHold Up To 3 Spools \u003cbr\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cimg height=\"315\" width=\"466\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/696\/573\/9165ccc2d9658dc110526de68a4d8fa2_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1615472692\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=4deaa8e37d8e40dc343e427cc0c14a26\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e Rechargeable Battery\u003c\/h2\u003e\n\u003cp\u003eThe battery last about 2 months if only opening and closing once a day.\u003c\/p\u003e\n\u003cp\u003e\u003cimg data-mce-fragment=\"1\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/432\/917\/7635b26eb939d284e9a9225ac351d032_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620421679\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=4a5640ad6238488de68e47ab4ce56f22\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/432\/917\/7635b26eb939d284e9a9225ac351d032_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620421679\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=4a5640ad6238488de68e47ab4ce56f22\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eAdditional Features:\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/462\/701\/8eaf3b559f2f7a91380b5fdf741fb637_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620676772\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=8f14be9f3d8ecd11c28191342c9b8ea2\" width=\"493\" height=\"542\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/580\/994\/e2822d14628bc7534290b3571bd912c0_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1614717152\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=550061f62f37f2fc005266e3db0c5ef6\" width=\"483\" height=\"516\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eLong-lasting design\u003c\/h3\u003e\n\u003cp class=\"mb2 text-preline\"\u003eExtra thick wall is used.\u003c\/p\u003e\n\u003ch3\u003eReusability and recyclability\u003c\/h3\u003e\n\u003cp class=\"mb2 text-preline\"\u003eThe container body is 100% recyclable.\u003c\/p\u003e\n\u003ch3\u003eEnvironmentally friendly factories\u003c\/h3\u003e\n\u003cp class=\"mb2 text-preline\"\u003eSolar panels are partially providing the power to our factory.\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e"}

PrintDry Smart Vacuum Filament Container

$139.99 CAD

One-Touch Sealing & Auto Re-Sealing -- Smart Filament Storage Solution PrintDry is proud to announce our newest filament storage solution -- a SMART solution!  With a built-in vacuum pump and a rechargeable battery, this filament container can be vacuum sealed by pushing ONE button.  No more manual pumps. More importantly, we also integrate...


More Info
Sold Out
Printdry Vacuum Sealed Filament Container 5 Pack - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services
{"id":1137443274788,"title":"Printdry Vacuum Sealed Filament Container 5 Pack","handle":"printdry-vacuum-sealed-filament-container-package-of-5","description":"\u003ch1\u003e\u003cstrong\u003eThe ultimate filament storage solution for 3D printing.\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eThe water content in a filament can cause various 3D printing problems, from the print being partially failed to the filament completely unprintable. Leaving your filament spools unprotected will make it absorb moisture in the air and reduce its printability. This happens to almost all the filaments. Therefore, it is very important to store your filaments in a dry environment to ensure a longer shelf life.\u003c\/p\u003e\n\u003cp\u003eAfter 2 successful Kickstarter campaigns in 2016 for our filament dryer and in 2017 for our filament container, we are now glad to introduce the \u003cb\u003ePrintDry Vacuum Sealed Filament Container\u003c\/b\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"PrintDry Vacuum Filament Container 3D Printing Canada\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/PrintDry-Vacuum-Filament-Container-3D-Printing-Canada-2.png?v=1534949587\"\u003e\u003c\/p\u003e\n\u003cp\u003eOur PrintDry filament containers keep your stored filament dry and reduce moisture-related printing problems, they will also keep your printing area clean and organized.\u003c\/p\u003e\n\u003ch1 id=\"h:features\"\u003e\u003cspan\u003e5 PACK - Contents of Package:\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e5 x PrintDry Containers\u003c\/b\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e5x Vacuum Sealing Lids with Air Valve\u003c\/b\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e5x Sets of Lid Clamps\u003c\/b\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e1x Hand Pump\u003c\/b\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 id=\"h:features\"\u003eFeatures: \u003c\/h1\u003e\n\u003cp\u003e\u003cb\u003e1)\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eVacuum valve and pump\u003c\/b\u003e: A special valve and a pump are used to suck the air out to create a vacuum seal and this will prevent the moisture in the air from getting into the container. \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"PrintDry Vacuum Filament Container 3D Printing Canada\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/PrintDry-Vacuum-Filament-Container-3D-Printing-Canada-3.png?v=1534949677\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e2) Stronger structure\u003c\/b\u003e\u003cspan\u003e: In order to hold a strong vacuum seal, both the lid and the container itself have been specially designed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"PrintDry Vacuum Filament Container 3D Printing Canada\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/PrintDry-Vacuum-Filament-Container-3D-Printing-Canada-1.png?v=1534949735\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003e3)  Vacuum indicator\u003c\/b\u003e: when completely vacuum sealed, the center of the vacuum valve will collapse inward from its original dome shape.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"PrintDry Vacuum Filament Container 3D Printing Canada\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/PrintDry-Vacuum-Filament-Container-3D-Printing-Canada-4.png?v=1534949779\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1 id=\"h:testing\"\u003eTesting:  \u003c\/h1\u003e\n\u003cp\u003eThe vacuum filament container has been tested with a 750g filament spool inside for 30 days. The graph below shows the changes of the relative humidity (grey line) inside the container and the ambient humidity (red line) as the storage time increases. Five pouches of 15g desiccant are included in the container.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"PrintDry Vacuum Filament Container 3D Printing Canada\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/PrintDry-Vacuum-Filament-Container-3D-Printing-Canada-5.jpg?v=1534949863\"\u003e\u003c\/p\u003e\n\u003ch1 id=\"h:how-to-use\"\u003eHow to use:\u003c\/h1\u003e\n\u003cp\u003eOur new vacuum sealed containers are super easy to use.  \u003c\/p\u003e\n\u003cp\u003e1) Place your filament spool inside the container with some desiccant pouches, put on the lid and align the tabs of the lid and the container, engage the 4 strong clamps.\u003c\/p\u003e\n\u003cp\u003e2) Take the hand plunger and line up the bottom of the hand plunger with the center vacuum valve on the container lid.  Pressing down gently on the hand plunger, simply lift the plunger handle slowly until it reaches the top of the pump, and then push down on the plunger until it reaches the bottom of the pump. Repeat this up and down motion for 5-10 times.\u003c\/p\u003e\n\u003cp\u003e3) To release the vacuum seal, place your index finger on the outside rim of the valve, and press it towards the center.\u003c\/p\u003e\n\u003cp\u003ePlease be aware that too many pumps will end up putting too much pressure on the container walls and lids and will lead to damage of your containers.\u003c\/p\u003e\n\u003ch1 id=\"h:specification\"\u003eSpecification : \u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eContainer overall size: 255(OD) x 115(H) mm (10.5\"OD x 4.5\"H)\u003c\/li\u003e\n\u003cli\u003eFilament spool size (max): 205(OD) x 85(H) mm (8\"OD x 3.3\"H)  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 id=\"h:design-improvements\"\u003eDesign improvements:\u003c\/h1\u003e\n\u003cp\u003e1) A thicker durable plastic to withstand the extreme pressure of on the walls and lid of the containers when vacuum seal is achieved.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2) Accept taller spools of filament than our original container. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/PrintDry-Vacuum-Filament-Container-3D-Printing-Canada-6.png?v=1534952148\" alt=\"PrintDry Vacuum Filament Container 3D Printing Canada\"\u003e\u003c\/p\u003e","published_at":"2017-01-29T12:28:00-05:00","created_at":"2019-02-15T10:54:13-05:00","vendor":"Printdry","type":"Accessories","tags":["container","Filament","filament dryer","new-arrivals","vacuum"],"price":9995,"price_min":9995,"price_max":9995,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":10295980884004,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRNTDRY-FLCNTR-VACSL-5PK","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Printdry Vacuum Sealed Filament Container 5 Pack","public_title":null,"options":["Default Title"],"price":9995,"weight":6000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"628011798114","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/Printdry-Filament-Coantainer.jpg?v=1594465735"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Printdry-Filament-Coantainer.jpg?v=1594465735","options":["Title"],"media":[{"alt":"Printdry Vacuum Sealed Filament Container 5 Pack - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":1471874793603,"position":1,"preview_image":{"aspect_ratio":1.829,"height":2834,"width":5184,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Printdry-Filament-Coantainer.jpg?v=1594465735"},"aspect_ratio":1.829,"height":2834,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Printdry-Filament-Coantainer.jpg?v=1594465735","width":5184}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003e\u003cstrong\u003eThe ultimate filament storage solution for 3D printing.\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eThe water content in a filament can cause various 3D printing problems, from the print being partially failed to the filament completely unprintable. Leaving your filament spools unprotected will make it absorb moisture in the air and reduce its printability. This happens to almost all the filaments. Therefore, it is very important to store your filaments in a dry environment to ensure a longer shelf life.\u003c\/p\u003e\n\u003cp\u003eAfter 2 successful Kickstarter campaigns in 2016 for our filament dryer and in 2017 for our filament container, we are now glad to introduce the \u003cb\u003ePrintDry Vacuum Sealed Filament Container\u003c\/b\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"PrintDry Vacuum Filament Container 3D Printing Canada\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/PrintDry-Vacuum-Filament-Container-3D-Printing-Canada-2.png?v=1534949587\"\u003e\u003c\/p\u003e\n\u003cp\u003eOur PrintDry filament containers keep your stored filament dry and reduce moisture-related printing problems, they will also keep your printing area clean and organized.\u003c\/p\u003e\n\u003ch1 id=\"h:features\"\u003e\u003cspan\u003e5 PACK - Contents of Package:\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e5 x PrintDry Containers\u003c\/b\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e5x Vacuum Sealing Lids with Air Valve\u003c\/b\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e5x Sets of Lid Clamps\u003c\/b\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e1x Hand Pump\u003c\/b\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 id=\"h:features\"\u003eFeatures: \u003c\/h1\u003e\n\u003cp\u003e\u003cb\u003e1)\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eVacuum valve and pump\u003c\/b\u003e: A special valve and a pump are used to suck the air out to create a vacuum seal and this will prevent the moisture in the air from getting into the container. \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"PrintDry Vacuum Filament Container 3D Printing Canada\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/PrintDry-Vacuum-Filament-Container-3D-Printing-Canada-3.png?v=1534949677\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e2) Stronger structure\u003c\/b\u003e\u003cspan\u003e: In order to hold a strong vacuum seal, both the lid and the container itself have been specially designed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"PrintDry Vacuum Filament Container 3D Printing Canada\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/PrintDry-Vacuum-Filament-Container-3D-Printing-Canada-1.png?v=1534949735\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003e3)  Vacuum indicator\u003c\/b\u003e: when completely vacuum sealed, the center of the vacuum valve will collapse inward from its original dome shape.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"PrintDry Vacuum Filament Container 3D Printing Canada\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/PrintDry-Vacuum-Filament-Container-3D-Printing-Canada-4.png?v=1534949779\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1 id=\"h:testing\"\u003eTesting:  \u003c\/h1\u003e\n\u003cp\u003eThe vacuum filament container has been tested with a 750g filament spool inside for 30 days. The graph below shows the changes of the relative humidity (grey line) inside the container and the ambient humidity (red line) as the storage time increases. Five pouches of 15g desiccant are included in the container.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"PrintDry Vacuum Filament Container 3D Printing Canada\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/PrintDry-Vacuum-Filament-Container-3D-Printing-Canada-5.jpg?v=1534949863\"\u003e\u003c\/p\u003e\n\u003ch1 id=\"h:how-to-use\"\u003eHow to use:\u003c\/h1\u003e\n\u003cp\u003eOur new vacuum sealed containers are super easy to use.  \u003c\/p\u003e\n\u003cp\u003e1) Place your filament spool inside the container with some desiccant pouches, put on the lid and align the tabs of the lid and the container, engage the 4 strong clamps.\u003c\/p\u003e\n\u003cp\u003e2) Take the hand plunger and line up the bottom of the hand plunger with the center vacuum valve on the container lid.  Pressing down gently on the hand plunger, simply lift the plunger handle slowly until it reaches the top of the pump, and then push down on the plunger until it reaches the bottom of the pump. Repeat this up and down motion for 5-10 times.\u003c\/p\u003e\n\u003cp\u003e3) To release the vacuum seal, place your index finger on the outside rim of the valve, and press it towards the center.\u003c\/p\u003e\n\u003cp\u003ePlease be aware that too many pumps will end up putting too much pressure on the container walls and lids and will lead to damage of your containers.\u003c\/p\u003e\n\u003ch1 id=\"h:specification\"\u003eSpecification : \u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eContainer overall size: 255(OD) x 115(H) mm (10.5\"OD x 4.5\"H)\u003c\/li\u003e\n\u003cli\u003eFilament spool size (max): 205(OD) x 85(H) mm (8\"OD x 3.3\"H)  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 id=\"h:design-improvements\"\u003eDesign improvements:\u003c\/h1\u003e\n\u003cp\u003e1) A thicker durable plastic to withstand the extreme pressure of on the walls and lid of the containers when vacuum seal is achieved.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2) Accept taller spools of filament than our original container. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/PrintDry-Vacuum-Filament-Container-3D-Printing-Canada-6.png?v=1534952148\" alt=\"PrintDry Vacuum Filament Container 3D Printing Canada\"\u003e\u003c\/p\u003e"}

Printdry Vacuum Sealed Filament Container 5 Pack

$99.95 CAD

The ultimate filament storage solution for 3D printing. The water content in a filament can cause various 3D printing problems, from the print being partially failed to the filament completely unprintable. Leaving your filament spools unprotected will make it absorb moisture in the air and reduce its printability. This happens to almost all the ...


More Info
{"id":7528606662886,"title":"Slice Engineering Filament Drying Desiccant","handle":"slice-engineering-filament-drying-desiccant","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eActivated alumina desiccant is \u003cstrong data-mce-fragment=\"1\"\u003e10x more powerful\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ethan comparable silica gel, and is non-toxic!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCreates enough of a relative humidity (Rh) gradient to absorb both surface moisture and water particles captured inside the filament.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel canister is perfectly sized to fit in the center of your filament spool.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesiccant is infinitely rechargeable in the stainless steel container.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHumidity indicator card included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTo use simply remove the outer shrink wrap and pop off the cap, then insert the canister into the center of your filament spool. Store the spool in an airtight container and watch the humidity drop!\u003c\/p\u003e","published_at":"2021-12-30T10:48:53-05:00","created_at":"2021-12-30T10:29:03-05:00","vendor":"Slice Engineering","type":"Accessories","tags":["activated alumina","filament drying desiccant","filament-dryer","slice engineering"],"price":2599,"price_min":2599,"price_max":2599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42247847215334,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SE-FLDD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Slice Engineering Filament Drying Desiccant","public_title":null,"options":["Default Title"],"price":2599,"weight":1000,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"850035484074","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/DSCF3420copy_540x_d2586a26-75c6-4fd0-ab5c-fea3f6276cd7.jpg?v=1640878174"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/DSCF3420copy_540x_d2586a26-75c6-4fd0-ab5c-fea3f6276cd7.jpg?v=1640878174","options":["Title"],"media":[{"alt":"Slice Engineering Filament Drying Desiccant - Digitmakers.ca","id":29010699387110,"position":1,"preview_image":{"aspect_ratio":1.0,"height":540,"width":540,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/DSCF3420copy_540x_d2586a26-75c6-4fd0-ab5c-fea3f6276cd7.jpg?v=1640878174"},"aspect_ratio":1.0,"height":540,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/DSCF3420copy_540x_d2586a26-75c6-4fd0-ab5c-fea3f6276cd7.jpg?v=1640878174","width":540}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eActivated alumina desiccant is \u003cstrong data-mce-fragment=\"1\"\u003e10x more powerful\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ethan comparable silica gel, and is non-toxic!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCreates enough of a relative humidity (Rh) gradient to absorb both surface moisture and water particles captured inside the filament.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel canister is perfectly sized to fit in the center of your filament spool.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesiccant is infinitely rechargeable in the stainless steel container.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHumidity indicator card included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTo use simply remove the outer shrink wrap and pop off the cap, then insert the canister into the center of your filament spool. Store the spool in an airtight container and watch the humidity drop!\u003c\/p\u003e"}

Slice Engineering Filament Drying Desiccant

$25.99 CAD

Activated alumina desiccant is 10x more powerful than comparable silica gel, and is non-toxic! Creates enough of a relative humidity (Rh) gradient to absorb both surface moisture and water particles captured inside the filament. Stainless steel canister is perfectly sized to fit in the center of your filament spool. Desiccant is infinitely rech...


More Info