{"id":4460896452739,"title":"Clear - 1.75mm Taulman Tech-G Filament - 1 kg","handle":"clear-taulman-tech-g-3d-printing-filament","description":"\u003cp\u003eTech-G was specifically designed to address two specific problems with PLA and ABS filaments. In case of PLA, it was brittle nature which severely limited functional testing and ABS was limited in its tensile strength. Hence, Taulman launched a new high-strength PETG which had much higher tensile strength than ABS and more elongation than a typical PLA filament.\u003c\/p\u003e\n\u003cp\u003eIt comes in natural color and is widely used in designing jewelry. It is available in 1.75mm, and 2.85mm diameters and the spool weighs 1kg.\u003c\/p\u003e\n\u003cp\u003eIt is FDA approved for both food and drink contact and is soluble in Tetrahydrofuran like most of our printing filaments available on this website.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications \u003c\/h4\u003e\n\u003ctable width=\"100%\" class=\"table-hover table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacture Part ID\u003c\/td\u003e\n\u003ctd\u003etegc1\/tegc3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHS Code\u003c\/td\u003e\n\u003ctd\u003e3916.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThermal\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrinting Temperature\u003c\/td\u003e\n\u003ctd\u003e235C-242C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd\u003e217C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg Glass transition\u003c\/td\u003e\n\u003ctd\u003e77C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePyrolysis - Thermal degradation\u003c\/td\u003e\n\u003ctd\u003e294C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNon-Destructive Evaluation\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint-Bed Temp\u003c\/td\u003e\n\u003ctd\u003e68C Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temp (Enclosure)\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePhysical\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Diameter (3mm Maximum Dia)\u003c\/td\u003e\n\u003ctd\u003e1.75mm\/2.85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight \/spool\u003c\/td\u003e\n\u003ctd\u003e1kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Length\/spool (In Feet)\u003c\/td\u003e\n\u003ctd\u003e700\/520\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage - in\/in\u003c\/td\u003e\n\u003ctd\u003e0.0029\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolvent\/Glue\u003c\/td\u003e\n\u003ctd\u003eTetrahydrofuran\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Stress \"PSI\" when 3D Printed\u003c\/td\u003e\n\u003ctd\u003e5.900\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Elongation when 3D Printed\u003c\/td\u003e\n\u003ctd\u003e3.00%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModulus \"PSI\" when 3D Printed\u003c\/td\u003e\n\u003ctd\u003e63839\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOptical\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpacity\u003c\/td\u003e\n\u003ctd\u003e90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReflectivity\u003c\/td\u003e\n\u003ctd\u003eTBD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApprovals\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA - Direct Food Contact\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA Direct Drink Contact\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUL Flammability\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUL 94 HB\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUL 94 V2 at 1.5 mm thickness\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeatures\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface texture\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLiving Hinge\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse of Taps for threads\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCNC finish tooling\u003c\/td\u003e\n\u003ctd\u003eCarbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCNC Coolant\u003c\/td\u003e\n\u003ctd\u003eForced Air Only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse in 3D Forging\u003c\/td\u003e\n\u003ctd\u003egood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrinted Prosthesis\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRobotic Assemblies\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJewelry Printing\u003c\/td\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFumes\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLenticulated overlays.\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDye type\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDye Uptake (Saturation)\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecifications are subject to change\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2020-01-18T10:44:02-05:00","created_at":"2020-01-18T12:34:39-05:00","vendor":"Digitmakers.ca","type":"","tags":["1.75","1.75 mm","1.75mm","3D Filament","3D Printer Filament","Filament"],"price":3899,"price_min":3899,"price_max":3899,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31752251572355,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TMN-FL-1.75MM-1KG-Clear","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Clear - 1.75mm Taulman Tech-G Filament - 1 kg","public_title":null,"options":["Default Title"],"price":3899,"weight":1000,"compare_at_price":null,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":"688295584797"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Capture_97095f70-c284-4b09-84f0-6cf9fc2de1d2.jpg?v=1579368907"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Capture_97095f70-c284-4b09-84f0-6cf9fc2de1d2.jpg?v=1579368907","options":["Title"],"media":[{"alt":"Clear - 1.75mm Taulman Tech-G Filament - 1 kg","id":6134906847363,"position":1,"preview_image":{"aspect_ratio":1.354,"height":847,"width":1147,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Capture_97095f70-c284-4b09-84f0-6cf9fc2de1d2.jpg?v=1579368907"},"aspect_ratio":1.354,"height":847,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Capture_97095f70-c284-4b09-84f0-6cf9fc2de1d2.jpg?v=1579368907","width":1147}],"content":"\u003cp\u003eTech-G was specifically designed to address two specific problems with PLA and ABS filaments. In case of PLA, it was brittle nature which severely limited functional testing and ABS was limited in its tensile strength. Hence, Taulman launched a new high-strength PETG which had much higher tensile strength than ABS and more elongation than a typical PLA filament.\u003c\/p\u003e\n\u003cp\u003eIt comes in natural color and is widely used in designing jewelry. It is available in 1.75mm, and 2.85mm diameters and the spool weighs 1kg.\u003c\/p\u003e\n\u003cp\u003eIt is FDA approved for both food and drink contact and is soluble in Tetrahydrofuran like most of our printing filaments available on this website.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications \u003c\/h4\u003e\n\u003ctable width=\"100%\" class=\"table-hover table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacture Part ID\u003c\/td\u003e\n\u003ctd\u003etegc1\/tegc3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHS Code\u003c\/td\u003e\n\u003ctd\u003e3916.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThermal\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrinting Temperature\u003c\/td\u003e\n\u003ctd\u003e235C-242C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd\u003e217C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg Glass transition\u003c\/td\u003e\n\u003ctd\u003e77C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePyrolysis - Thermal degradation\u003c\/td\u003e\n\u003ctd\u003e294C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNon-Destructive Evaluation\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint-Bed Temp\u003c\/td\u003e\n\u003ctd\u003e68C Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temp (Enclosure)\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePhysical\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Diameter (3mm Maximum Dia)\u003c\/td\u003e\n\u003ctd\u003e1.75mm\/2.85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight \/spool\u003c\/td\u003e\n\u003ctd\u003e1kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Length\/spool (In Feet)\u003c\/td\u003e\n\u003ctd\u003e700\/520\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage - in\/in\u003c\/td\u003e\n\u003ctd\u003e0.0029\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolvent\/Glue\u003c\/td\u003e\n\u003ctd\u003eTetrahydrofuran\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Stress \"PSI\" when 3D Printed\u003c\/td\u003e\n\u003ctd\u003e5.900\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Elongation when 3D Printed\u003c\/td\u003e\n\u003ctd\u003e3.00%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModulus \"PSI\" when 3D Printed\u003c\/td\u003e\n\u003ctd\u003e63839\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOptical\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpacity\u003c\/td\u003e\n\u003ctd\u003e90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReflectivity\u003c\/td\u003e\n\u003ctd\u003eTBD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApprovals\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA - Direct Food Contact\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA Direct Drink Contact\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUL Flammability\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUL 94 HB\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUL 94 V2 at 1.5 mm thickness\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeatures\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface texture\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLiving Hinge\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse of Taps for threads\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCNC finish tooling\u003c\/td\u003e\n\u003ctd\u003eCarbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCNC Coolant\u003c\/td\u003e\n\u003ctd\u003eForced Air Only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse in 3D Forging\u003c\/td\u003e\n\u003ctd\u003egood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrinted Prosthesis\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRobotic Assemblies\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJewelry Printing\u003c\/td\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFumes\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLenticulated overlays.\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDye type\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDye Uptake (Saturation)\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecifications are subject to change\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}

{"id":4460862046339,"title":"Push-Fit connector 4 mm","handle":"push-fit-connector-4-mm","description":"\u003cp\u003ePush-fit Connector in brass for 4 or 6 mm tube.\u003c\/p\u003e\n\u003cp\u003e4 mm assembles in 8.0 mm pocket with a minimum depth of 5 mm.\u003c\/p\u003e\n\u003cp\u003e6 mm assembles in 13.4 mm pocket with a minimum depth of 6 mm.\u003c\/p\u003e","published_at":"2020-01-18T10:44:02-05:00","created_at":"2020-01-18T11:52:50-05:00","vendor":"Digitmakers.ca","type":"","tags":[],"price":270,"price_min":270,"price_max":270,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31751962919043,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Push-Fit connector 4 mm","public_title":null,"options":["Default Title"],"price":270,"weight":500,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Pushfit-connector-4mm.jpg?v=1579366370"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Pushfit-connector-4mm.jpg?v=1579366370","options":["Title"],"media":[{"alt":"Push-Fit connector 4 mm","id":6134681993347,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Pushfit-connector-4mm.jpg?v=1579366370"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Pushfit-connector-4mm.jpg?v=1579366370","width":400}],"content":"\u003cp\u003ePush-fit Connector in brass for 4 or 6 mm tube.\u003c\/p\u003e\n\u003cp\u003e4 mm assembles in 8.0 mm pocket with a minimum depth of 5 mm.\u003c\/p\u003e\n\u003cp\u003e6 mm assembles in 13.4 mm pocket with a minimum depth of 6 mm.\u003c\/p\u003e"}

{"id":4460748636291,"title":"SLS X-Carriage kit for Prusa i3 MK3S","handle":"sls-x-carriage-kit-for-prusa-i3-mk3s","description":"\u003ch4\u003eHigh Temperature X-Carriage\u003c\/h4\u003e\n\u003cp\u003eA X-Carriage kit is required to install our Bondtech Upgrade Kit for Prusa i3 MK3S.\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eThis SLS version is for users that work with enclosed chambers to heat the air inside up to 100°C\u003c\/b\u003e. The FFF version, made of HT-PLA would deform in such conditions.\u003c\/p\u003e\n\u003ch4\u003eContents Of The Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSLS X-Carriage Front\u003c\/li\u003e\n\u003cli\u003eSLS X-Carriage Rear\u003c\/li\u003e\n\u003cli\u003e5x M3x10 Screws\u003c\/li\u003e\n\u003cli\u003e5x M3 square nut\u003c\/li\u003e\n\u003cli\u003e1x M3 nut\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-01-18T10:44:02-05:00","created_at":"2020-01-18T10:48:32-05:00","vendor":"Digitmakers.ca","type":"","tags":["3D parts","3d printer parts reprap","Bondetch","bondtech","i3 MK3S","MK3","MK3s","parts","SLS X-Carriage kit"],"price":4899,"price_min":4899,"price_max":4899,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31751384105091,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"15058","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SLS X-Carriage kit for Prusa i3 MK3S","public_title":null,"options":["Default Title"],"price":4899,"weight":2000,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350011410743"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/SLS-X-CARRIAGE-KIT-PRUSA-1200x800-0466.jpg?v=1579362512","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/SLS-X-CARRIAGE-KIT-PRUSA-1200x800-0470.jpg?v=1579362512","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/SLS-X-CARRIAGE-KIT-PRUSA-1200x800-0471.jpg?v=1579362512","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/SLS-X-CARRIAGE-KIT-PRUSA-1200x800-0474.jpg?v=1579362512"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/SLS-X-CARRIAGE-KIT-PRUSA-1200x800-0466.jpg?v=1579362512","options":["Title"],"media":[{"alt":"SLS X-Carriage kit for Prusa i3 MK3S","id":6134256402563,"position":1,"preview_image":{"aspect_ratio":1.5,"height":800,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/SLS-X-CARRIAGE-KIT-PRUSA-1200x800-0466.jpg?v=1579362512"},"aspect_ratio":1.5,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/SLS-X-CARRIAGE-KIT-PRUSA-1200x800-0466.jpg?v=1579362512","width":1200},{"alt":"SLS X-Carriage kit for Prusa i3 MK3S","id":6134256468099,"position":2,"preview_image":{"aspect_ratio":1.5,"height":800,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/SLS-X-CARRIAGE-KIT-PRUSA-1200x800-0470.jpg?v=1579362512"},"aspect_ratio":1.5,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/SLS-X-CARRIAGE-KIT-PRUSA-1200x800-0470.jpg?v=1579362512","width":1200},{"alt":"SLS X-Carriage kit for Prusa i3 MK3S","id":6134256500867,"position":3,"preview_image":{"aspect_ratio":1.5,"height":800,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/SLS-X-CARRIAGE-KIT-PRUSA-1200x800-0471.jpg?v=1579362512"},"aspect_ratio":1.5,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/SLS-X-CARRIAGE-KIT-PRUSA-1200x800-0471.jpg?v=1579362512","width":1200},{"alt":"SLS X-Carriage kit for Prusa i3 MK3S","id":6134256566403,"position":4,"preview_image":{"aspect_ratio":1.5,"height":800,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/SLS-X-CARRIAGE-KIT-PRUSA-1200x800-0474.jpg?v=1579362512"},"aspect_ratio":1.5,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/SLS-X-CARRIAGE-KIT-PRUSA-1200x800-0474.jpg?v=1579362512","width":1200}],"content":"\u003ch4\u003eHigh Temperature X-Carriage\u003c\/h4\u003e\n\u003cp\u003eA X-Carriage kit is required to install our Bondtech Upgrade Kit for Prusa i3 MK3S.\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eThis SLS version is for users that work with enclosed chambers to heat the air inside up to 100°C\u003c\/b\u003e. The FFF version, made of HT-PLA would deform in such conditions.\u003c\/p\u003e\n\u003ch4\u003eContents Of The Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSLS X-Carriage Front\u003c\/li\u003e\n\u003cli\u003eSLS X-Carriage Rear\u003c\/li\u003e\n\u003cli\u003e5x M3x10 Screws\u003c\/li\u003e\n\u003cli\u003e5x M3 square nut\u003c\/li\u003e\n\u003cli\u003e1x M3 nut\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":4459608834179,"title":"Nema 17 Motor Slim Power 0.9 degree","handle":"nema-17-motor-slim-power-0-9-degree","description":"\u003cdiv class=\"product-short-description\"\u003e\n\u003cp\u003eNema 17 High resolution 0.9 degree pancake stepper motor. Perfect fit for our BMG \/ Prusa extruder upgrades.\u003c\/p\u003e\n\u003cp\u003eDelivers with 1000 mm long cable with Dupont 4-pin connector to a JST-PH6 6-pin connector.\u003c\/p\u003e\n\u003cp\u003eFor common ratings, specifications and dimensions please see below or in the datasheet.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2020-01-17T18:07:20-05:00","created_at":"2020-01-17T18:07:55-05:00","vendor":"Digitmakers.ca","type":"","tags":["3D parts","3d printer parts reprap","Bondetch","bondtech","motor","nema 17","parts"],"price":1899,"price_min":1899,"price_max":1899,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31744574161027,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"13005","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Nema 17 Motor Slim Power 0.9 degree","public_title":null,"options":["Default Title"],"price":1899,"weight":0,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350011410712"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/13005.jpg?v=1579302475"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/13005.jpg?v=1579302475","options":["Title"],"media":[{"alt":"Nema 17 Motor Slim Power 0.9 degree","id":6128582426755,"position":1,"preview_image":{"aspect_ratio":1.0,"height":360,"width":360,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/13005.jpg?v=1579302475"},"aspect_ratio":1.0,"height":360,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/13005.jpg?v=1579302475","width":360}],"content":"\u003cdiv class=\"product-short-description\"\u003e\n\u003cp\u003eNema 17 High resolution 0.9 degree pancake stepper motor. Perfect fit for our BMG \/ Prusa extruder upgrades.\u003c\/p\u003e\n\u003cp\u003eDelivers with 1000 mm long cable with Dupont 4-pin connector to a JST-PH6 6-pin connector.\u003c\/p\u003e\n\u003cp\u003eFor common ratings, specifications and dimensions please see below or in the datasheet.\u003c\/p\u003e\n\u003c\/div\u003e"}

{"id":4459597725827,"title":"BMG-X2-M Extruder For Mosquito","handle":"bmg-x2-m-extruder","description":"\u003cp\u003eThe Bondtech BMG-X2 is the best and lightest performing extruder on the market that combines low weight with dual high feeding capacity.\u003c\/p\u003e\n\u003ch3\u003eDedicated For Mosquito Hotends\u003c\/h3\u003e\n\u003cp\u003eThis extruder is available in a single version, to use Mosquito hotends. The same version is also compatible with Mosquito Magnum.\u003c\/p\u003e\n\u003ch3\u003eSLS 3D Printed Housing in PA\u003c\/h3\u003e\n\u003cp\u003eThe housing parts are professionally SLS printed in nylon for maximum strength and precision.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFor 1.75mm Filaments only\u003c\/b\u003e\u003c\/p\u003e","published_at":"2020-01-17T17:43:42-05:00","created_at":"2020-01-17T17:57:57-05:00","vendor":"Digitmakers.ca","type":"","tags":[],"price":17699,"price_min":17699,"price_max":17699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31744528875651,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EXT-BMGX2-M","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BMG-X2-M Extruder For Mosquito","public_title":null,"options":["Default Title"],"price":17699,"weight":2000,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350011410668"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-M-5702-1200x800.jpg?v=1579301877","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-Mosquito-Fit-0057-1200x800.jpg?v=1579301877","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-Mosquito-Fit-0060-1200x800.jpg?v=1579301877","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-Mosquito-Fit-0085-1200x800.jpg?v=1579301877","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-Mosquito-Fit-0086-1200x800.jpg?v=1579301877","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-Mosquito-Fit-0087-1200x800.jpg?v=1579301877"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-M-5702-1200x800.jpg?v=1579301877","options":["Title"],"media":[{"alt":"BMG-X2-M Extruder For Mosquito","id":6128517185667,"position":1,"preview_image":{"aspect_ratio":1.5,"height":800,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-M-5702-1200x800.jpg?v=1579301877"},"aspect_ratio":1.5,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-M-5702-1200x800.jpg?v=1579301877","width":1200},{"alt":"BMG-X2-M Extruder For Mosquito","id":6128517218435,"position":2,"preview_image":{"aspect_ratio":1.5,"height":800,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-Mosquito-Fit-0057-1200x800.jpg?v=1579301877"},"aspect_ratio":1.5,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-Mosquito-Fit-0057-1200x800.jpg?v=1579301877","width":1200},{"alt":"BMG-X2-M Extruder For Mosquito","id":6128517251203,"position":3,"preview_image":{"aspect_ratio":1.5,"height":800,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-Mosquito-Fit-0060-1200x800.jpg?v=1579301877"},"aspect_ratio":1.5,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-Mosquito-Fit-0060-1200x800.jpg?v=1579301877","width":1200},{"alt":"BMG-X2-M Extruder For Mosquito","id":6128517283971,"position":4,"preview_image":{"aspect_ratio":1.5,"height":800,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-Mosquito-Fit-0085-1200x800.jpg?v=1579301877"},"aspect_ratio":1.5,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-Mosquito-Fit-0085-1200x800.jpg?v=1579301877","width":1200},{"alt":"BMG-X2-M Extruder For Mosquito","id":6128517316739,"position":5,"preview_image":{"aspect_ratio":1.5,"height":800,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-Mosquito-Fit-0086-1200x800.jpg?v=1579301877"},"aspect_ratio":1.5,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-Mosquito-Fit-0086-1200x800.jpg?v=1579301877","width":1200},{"alt":"BMG-X2-M Extruder For Mosquito","id":6128517349507,"position":6,"preview_image":{"aspect_ratio":1.5,"height":800,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-Mosquito-Fit-0087-1200x800.jpg?v=1579301877"},"aspect_ratio":1.5,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMGx2-Mosquito-Fit-0087-1200x800.jpg?v=1579301877","width":1200}],"content":"\u003cp\u003eThe Bondtech BMG-X2 is the best and lightest performing extruder on the market that combines low weight with dual high feeding capacity.\u003c\/p\u003e\n\u003ch3\u003eDedicated For Mosquito Hotends\u003c\/h3\u003e\n\u003cp\u003eThis extruder is available in a single version, to use Mosquito hotends. The same version is also compatible with Mosquito Magnum.\u003c\/p\u003e\n\u003ch3\u003eSLS 3D Printed Housing in PA\u003c\/h3\u003e\n\u003cp\u003eThe housing parts are professionally SLS printed in nylon for maximum strength and precision.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFor 1.75mm Filaments only\u003c\/b\u003e\u003c\/p\u003e"}

{"id":4459583242371,"title":"Prusa i3 MK3S \/ MK2.5S Mosquito","handle":"prusa-i3-mk3s-mk2-5s-mosquito","description":"\u003cp\u003eA lightweight high-resolution extruder upgrade for the popular Prusa i3 MK3S and MK2.5S 3D printers with optimized design to use Mosquito and Mosquito Magnum hotends.\u003c\/p\u003e\n\u003ch4\u003eUpgrade Your Prusa\u003c\/h4\u003e\n\u003cp\u003eUpgrade your Prusa with a Bondtech Mini Geared extruder featuring higher gear ratio – 3:1 – that allows for extra push force and higher resolution.\u003c\/p\u003e\n\u003ch4\u003ePrint Faster Or With Higher Quality\u003c\/h4\u003e\n\u003cp\u003eThis lightweight extruder will allow your 3D printer to print faster or to achieve even better surface quality.\u003c\/p\u003e\n\u003ch4\u003eReduce 3D Printing Issues\u003c\/h4\u003e\n\u003cp\u003eDecrease the risk of heat creep to avoid clogs and improve filament feeding by avoiding slipping and deformation that cause under and over extrusion issues\u003c\/p\u003e","published_at":"2020-01-17T17:43:42-05:00","created_at":"2020-01-17T17:47:44-05:00","vendor":"Digitmakers.ca","type":"","tags":["3D parts","3d printer parts reprap","Assembled Prusa","extruder","extruder gear","Extrusion","i3 MK3S","MK2.5","MK2.5s","MK3","MK3s","parts","Prusa"],"price":18199,"price_min":18199,"price_max":18199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31744341966979,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EXT-KIT-69","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Prusa i3 MK3S \/ MK2.5S Mosquito","public_title":null,"options":["Default Title"],"price":18199,"weight":2000,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7350011410675"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMG-MK3S-6565.jpg?v=1579301264","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Product-Mosquito-1200x800.jpg?v=1579301264","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ProductPic-6550-1200x800.jpg?v=1579301264","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ProductPic-6579-1200x1200.jpg?v=1579301264","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ProductPic-6581-1200x800.jpg?v=1579301264","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ProductPic-6582-1200x800.jpg?v=1579301264"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMG-MK3S-6565.jpg?v=1579301264","options":["Title"],"media":[{"alt":"Prusa i3 MK3S \/ MK2.5S Mosquito","id":6128438083715,"position":1,"preview_image":{"aspect_ratio":1.5,"height":800,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMG-MK3S-6565.jpg?v=1579301264"},"aspect_ratio":1.5,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/BMG-MK3S-6565.jpg?v=1579301264","width":1200},{"alt":"Prusa i3 MK3S \/ MK2.5S Mosquito","id":6128438116483,"position":2,"preview_image":{"aspect_ratio":1.5,"height":800,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Product-Mosquito-1200x800.jpg?v=1579301264"},"aspect_ratio":1.5,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Product-Mosquito-1200x800.jpg?v=1579301264","width":1200},{"alt":"Prusa i3 MK3S \/ MK2.5S Mosquito","id":6128438149251,"position":3,"preview_image":{"aspect_ratio":1.5,"height":800,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ProductPic-6550-1200x800.jpg?v=1579301264"},"aspect_ratio":1.5,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ProductPic-6550-1200x800.jpg?v=1579301264","width":1200},{"alt":"Prusa i3 MK3S \/ MK2.5S Mosquito","id":6128438182019,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ProductPic-6579-1200x1200.jpg?v=1579301264"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ProductPic-6579-1200x1200.jpg?v=1579301264","width":1200},{"alt":"Prusa i3 MK3S \/ MK2.5S Mosquito","id":6128438214787,"position":5,"preview_image":{"aspect_ratio":1.5,"height":800,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ProductPic-6581-1200x800.jpg?v=1579301264"},"aspect_ratio":1.5,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ProductPic-6581-1200x800.jpg?v=1579301264","width":1200},{"alt":"Prusa i3 MK3S \/ MK2.5S Mosquito","id":6128438247555,"position":6,"preview_image":{"aspect_ratio":1.5,"height":800,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ProductPic-6582-1200x800.jpg?v=1579301264"},"aspect_ratio":1.5,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ProductPic-6582-1200x800.jpg?v=1579301264","width":1200}],"content":"\u003cp\u003eA lightweight high-resolution extruder upgrade for the popular Prusa i3 MK3S and MK2.5S 3D printers with optimized design to use Mosquito and Mosquito Magnum hotends.\u003c\/p\u003e\n\u003ch4\u003eUpgrade Your Prusa\u003c\/h4\u003e\n\u003cp\u003eUpgrade your Prusa with a Bondtech Mini Geared extruder featuring higher gear ratio – 3:1 – that allows for extra push force and higher resolution.\u003c\/p\u003e\n\u003ch4\u003ePrint Faster Or With Higher Quality\u003c\/h4\u003e\n\u003cp\u003eThis lightweight extruder will allow your 3D printer to print faster or to achieve even better surface quality.\u003c\/p\u003e\n\u003ch4\u003eReduce 3D Printing Issues\u003c\/h4\u003e\n\u003cp\u003eDecrease the risk of heat creep to avoid clogs and improve filament feeding by avoiding slipping and deformation that cause under and over extrusion issues\u003c\/p\u003e"}

{"id":4424928755843,"title":"Flashforge Creator 3 Complete Extruder Hot End Assembly","handle":"flashforge-creator-3-complete-extruder-hot-end-assembly","description":"Complete hot end assembly including fan duct , hot end , heater cartridge \u0026amp; thermistor.","published_at":"2020-01-04T10:30:33-05:00","created_at":"2020-01-04T11:23:49-05:00","vendor":"Digitmakers.ca","type":"","tags":["3DPRINTER EXTRUDER","creator","creator 3","creator3","extruder","extruder gear","Flashforge","Flashforge Canada"],"price":8999,"price_min":8999,"price_max":8999,"available":true,"price_varies":false,"compare_at_price":13000,"compare_at_price_min":13000,"compare_at_price_max":13000,"compare_at_price_varies":false,"variants":[{"id":31561787441283,"title":"Right","option1":"Right","option2":null,"option3":null,"sku":"FF-EXTR-HTE-RIGHT-V0.1","requires_shipping":true,"taxable":true,"featured_image":{"id":13751496736899,"product_id":4424928755843,"position":1,"created_at":"2020-01-04T11:23:49-05:00","updated_at":"2020-01-04T12:35:22-05:00","alt":null,"width":2770,"height":2333,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/extruder_1.jpg?v=1578159322","variant_ids":[31561787441283]},"available":true,"name":"Flashforge Creator 3 Complete Extruder Hot End Assembly - Right","public_title":"Right","options":["Right"],"price":8999,"weight":1000,"compare_at_price":13000,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"15000044","featured_media":{"alt":"Flashforge Creator 3 Complete Extruder Hot End Assembly","id":5921188675715,"position":1,"preview_image":{"aspect_ratio":1.187,"height":2333,"width":2770,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/extruder_1.jpg?v=1578155029"}}},{"id":31561787474051,"title":"left","option1":"left","option2":null,"option3":null,"sku":"FF-EXTR-HTE-LEFT-V0.1","requires_shipping":true,"taxable":true,"featured_image":{"id":13751496802435,"product_id":4424928755843,"position":2,"created_at":"2020-01-04T11:23:49-05:00","updated_at":"2020-01-04T12:35:22-05:00","alt":null,"width":3792,"height":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/extruder_2.jpg?v=1578159322","variant_ids":[31561787474051]},"available":true,"name":"Flashforge Creator 3 Complete Extruder Hot End Assembly - left","public_title":"left","options":["left"],"price":8999,"weight":1000,"compare_at_price":13000,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"15000045","featured_media":{"alt":"Flashforge Creator 3 Complete Extruder Hot End Assembly","id":5921188741251,"position":2,"preview_image":{"aspect_ratio":1.254,"height":3024,"width":3792,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/extruder_2.jpg?v=1578155029"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/extruder_1.jpg?v=1578159322","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/extruder_2.jpg?v=1578159322","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/extruder_3.jpg?v=1578159322"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/extruder_1.jpg?v=1578159322","options":["Title"],"media":[{"alt":"Flashforge Creator 3 Complete Extruder Hot End Assembly","id":5921188675715,"position":1,"preview_image":{"aspect_ratio":1.187,"height":2333,"width":2770,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/extruder_1.jpg?v=1578155029"},"aspect_ratio":1.187,"height":2333,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/extruder_1.jpg?v=1578155029","width":2770},{"alt":"Flashforge Creator 3 Complete Extruder Hot End Assembly","id":5921188741251,"position":2,"preview_image":{"aspect_ratio":1.254,"height":3024,"width":3792,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/extruder_2.jpg?v=1578155029"},"aspect_ratio":1.254,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/extruder_2.jpg?v=1578155029","width":3792},{"alt":"Flashforge Creator 3 Complete Extruder Hot End Assembly","id":5921973141635,"position":3,"preview_image":{"aspect_ratio":1.099,"height":1901,"width":2090,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/extruder_3.jpg?v=1578159322"},"aspect_ratio":1.099,"height":1901,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/extruder_3.jpg?v=1578159322","width":2090}],"content":"Complete hot end assembly including fan duct , hot end , heater cartridge \u0026amp; thermistor."}

{"id":4406819520643,"title":"Extruder Breakout Board For Creatror 3","handle":"extruder-breakout-board-3d-printing-canada","description":"\u003cdiv class=\"rte\" itemprop=\"description\"\u003e\n\u003cdiv class=\"description ui-tabs ui-widget ui-widget-content ui-corner-all\" id=\"tabs\" itemprop=\"description\"\u003e\n\u003cdiv id=\"tabs-1\" aria-labelledby=\"ui-id-1\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\" role=\"tabpanel\" aria-expanded=\"true\" aria-hidden=\"false\"\u003e\n\u003cp\u003eFlashforge Creator 3 Extruder Board. Original spare part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"prod_sku_vend\"\u003e\u003c\/div\u003e","published_at":"2019-12-26T12:24:33-05:00","created_at":"2019-12-26T12:28:54-05:00","vendor":"Digitmakers.ca","type":"","tags":[],"price":2999,"price_min":2999,"price_max":2999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31460015603843,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FF-EXTRBRD-CREATOR3-V0.9","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Extruder Breakout Board For Creatror 3","public_title":null,"options":["Default Title"],"price":2999,"weight":500,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"15000043"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/P_20191226_121712_SRES_01.jpg?v=1577381334"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/P_20191226_121712_SRES_01.jpg?v=1577381334","options":["Title"],"media":[{"alt":"Extruder Breakout Board For Creatror 3","id":5851572830339,"position":1,"preview_image":{"aspect_ratio":1.068,"height":3917,"width":4182,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/P_20191226_121712_SRES_01.jpg?v=1577381334"},"aspect_ratio":1.068,"height":3917,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/P_20191226_121712_SRES_01.jpg?v=1577381334","width":4182}],"content":"\u003cdiv class=\"rte\" itemprop=\"description\"\u003e\n\u003cdiv class=\"description ui-tabs ui-widget ui-widget-content ui-corner-all\" id=\"tabs\" itemprop=\"description\"\u003e\n\u003cdiv id=\"tabs-1\" aria-labelledby=\"ui-id-1\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\" role=\"tabpanel\" aria-expanded=\"true\" aria-hidden=\"false\"\u003e\n\u003cp\u003eFlashforge Creator 3 Extruder Board. Original spare part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"prod_sku_vend\"\u003e\u003c\/div\u003e"}

{"id":4406717808771,"title":"0.4mm Nozzle For Flashforge Guider 2 High Temperature Hotend","handle":"nozzle-for-flashforge-guider-2-high-temperature-hotend-3d-printing-canada-filaments-ca-3d-scanner-3d-parts-canada","description":"\u003cp\u003eNozzle for New high temp. \u003ca href=\"https:\/\/www.digitmakers.ca\/products\/flashforge-guider-2-high-temperature-hotend-3d-printing-canada-filaments-ca-3d-scanners-3d-parts-canada?variant=11936924434468\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFlashforge Guider 2 High Temperature Hotend\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e0.4mm\u003c\/p\u003e\n\u003cp\u003eMaximum temperature is 300 °C. Upholding filament such as Nylon(PA),PC\u003c\/p\u003e\n\u003cp\u003eSupported material: PLA, ABS, Nylon, TPU, TPE, Wood, and PC.\u003c\/p\u003e","published_at":"2019-12-26T10:57:54-05:00","created_at":"2019-12-26T11:06:32-05:00","vendor":"Flashforge","type":"Parts","tags":["extruder","Flashforge","Flashforge Guider II","fullmetal","High temperature","hotend","mechanical","new-arrivals","nozzle"],"price":1999,"price_min":1999,"price_max":1999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31459100229763,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FF-NOZ-EX004-Guider-2-High-Hotend","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"0.4mm Nozzle For Flashforge Guider 2 High Temperature Hotend","public_title":null,"options":["Default Title"],"price":1999,"weight":500,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"15000054"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/LRM_EXPORT_20191226_112732.jpg?v=1578691513"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/LRM_EXPORT_20191226_112732.jpg?v=1578691513","options":["Title"],"media":[{"alt":"0.4mm nozzle for flashforge guider 2 3d printer available in canada, 3d printing canada ","id":5851312062595,"position":1,"preview_image":{"aspect_ratio":1.001,"height":1970,"width":1971,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/LRM_EXPORT_20191226_112732.jpg?v=1577378418"},"aspect_ratio":1.001,"height":1970,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/LRM_EXPORT_20191226_112732.jpg?v=1577378418","width":1971}],"content":"\u003cp\u003eNozzle for New high temp. \u003ca href=\"https:\/\/www.digitmakers.ca\/products\/flashforge-guider-2-high-temperature-hotend-3d-printing-canada-filaments-ca-3d-scanners-3d-parts-canada?variant=11936924434468\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFlashforge Guider 2 High Temperature Hotend\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e0.4mm\u003c\/p\u003e\n\u003cp\u003eMaximum temperature is 300 °C. Upholding filament such as Nylon(PA),PC\u003c\/p\u003e\n\u003cp\u003eSupported material: PLA, ABS, Nylon, TPU, TPE, Wood, and PC.\u003c\/p\u003e"}

{"id":4403760365699,"title":"Nozzle Torque Wrench™: 1.5 Nm","handle":"nozzle-torque-wrench-1-5-nm-3d-parts-3d-printing-canada","description":"\u003cul data-rte-list=\"default\"\u003e\n\u003cli\u003e\n\u003cp class=\"\"\u003eSpecifically designed for changing nozzles\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"\"\u003e1.5 Nm torque provides correct seal to prevent leaking plastic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"\"\u003ePerfect tool for one-handed nozzle change when paired with \u003ca href=\"https:\/\/www.sliceengineering.com\/shop\/https:\/\/www.sliceengineering.com\/shop\/the-mosquito-hotend\" target=\"_blank\" rel=\"noopener noreferrer\" aria-describedby=\"a11y-new-window-message\"\u003eThe Mosquito Hotend\u003c\/a\u003e™\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"\"\u003eFits \u003ca href=\"https:\/\/www.sliceengineering.com\/shop\/hardened-nozzle\" target=\"_blank\" rel=\"noopener noreferrer\" aria-describedby=\"a11y-new-window-message\"\u003eVanadium Nozzles\u003c\/a\u003e™ natively, with just enough wiggle room for that baked on plastic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"\"\u003eFits other style nozzles with off-the-shelf adapters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAnnoying nozzle changes getting you down? Use the Nozzle Torque Wrench™ to wrench away your leaky nozzle woes. The rotary slip mechanism is set to 1.5 Nm, the exact torque you need to get that nice seal when tightening your nozzles, and uses a standard 1\/4” drive.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDesigned to fit the Slice Engineering™ Vanadium Nozzles™ without an adapter, as our nozzles have a 6 mm hex (that’s a little under 1\/4” for those that don’t speak Metric), with a little wiggle room for that stubborn adhered plastic.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Nozzle Torque Wrench™ will fit any other nozzles when used in combination with a hex-to-square drive adapter and appropriately sized socket.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMade in Taiwan, packaged in USA. \u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-12-24T16:09:28-05:00","created_at":"2019-12-24T17:53:30-05:00","vendor":"Slice Engineering","type":"","tags":["3D parts","3d printer parts reprap","nozzle","nozzle torque wrench","parts","slice engineering"],"price":3299,"price_min":3299,"price_max":3299,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31432886059139,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SEN-NTW-1.5NM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Nozzle Torque Wrench™: 1.5 Nm","public_title":null,"options":["Default Title"],"price":3299,"weight":600,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"0850005423300"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/slice_1.jpg?v=1577228010","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/slice_2.jpg?v=1577228010","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/slice_3.jpg?v=1577228010"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/slice_1.jpg?v=1577228010","options":["Title"],"media":[{"alt":"Nozzle Torque Wrench™: 1.5 Nm","id":5836488278147,"position":1,"preview_image":{"aspect_ratio":0.667,"height":2048,"width":1365,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/slice_1.jpg?v=1577228010"},"aspect_ratio":0.667,"height":2048,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/slice_1.jpg?v=1577228010","width":1365},{"alt":"Nozzle Torque Wrench™: 1.5 Nm","id":5836488310915,"position":2,"preview_image":{"aspect_ratio":0.667,"height":2048,"width":1365,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/slice_2.jpg?v=1577228010"},"aspect_ratio":0.667,"height":2048,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/slice_2.jpg?v=1577228010","width":1365},{"alt":"Nozzle Torque Wrench™: 1.5 Nm","id":5836488343683,"position":3,"preview_image":{"aspect_ratio":0.667,"height":2048,"width":1365,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/slice_3.jpg?v=1577228010"},"aspect_ratio":0.667,"height":2048,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/slice_3.jpg?v=1577228010","width":1365}],"content":"\u003cul data-rte-list=\"default\"\u003e\n\u003cli\u003e\n\u003cp class=\"\"\u003eSpecifically designed for changing nozzles\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"\"\u003e1.5 Nm torque provides correct seal to prevent leaking plastic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"\"\u003ePerfect tool for one-handed nozzle change when paired with \u003ca href=\"https:\/\/www.sliceengineering.com\/shop\/https:\/\/www.sliceengineering.com\/shop\/the-mosquito-hotend\" target=\"_blank\" rel=\"noopener noreferrer\" aria-describedby=\"a11y-new-window-message\"\u003eThe Mosquito Hotend\u003c\/a\u003e™\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"\"\u003eFits \u003ca href=\"https:\/\/www.sliceengineering.com\/shop\/hardened-nozzle\" target=\"_blank\" rel=\"noopener noreferrer\" aria-describedby=\"a11y-new-window-message\"\u003eVanadium Nozzles\u003c\/a\u003e™ natively, with just enough wiggle room for that baked on plastic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"\"\u003eFits other style nozzles with off-the-shelf adapters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAnnoying nozzle changes getting you down? Use the Nozzle Torque Wrench™ to wrench away your leaky nozzle woes. The rotary slip mechanism is set to 1.5 Nm, the exact torque you need to get that nice seal when tightening your nozzles, and uses a standard 1\/4” drive.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDesigned to fit the Slice Engineering™ Vanadium Nozzles™ without an adapter, as our nozzles have a 6 mm hex (that’s a little under 1\/4” for those that don’t speak Metric), with a little wiggle room for that stubborn adhered plastic.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Nozzle Torque Wrench™ will fit any other nozzles when used in combination with a hex-to-square drive adapter and appropriately sized socket.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMade in Taiwan, packaged in USA. \u003c\/span\u003e\u003c\/p\u003e"}

{"id":4396021219459,"title":"ESun PETG ReFilament 1.75 mm 1kg Spool","handle":"esun-petg-refilament-3d-filament-3d-printer","description":"\u003cp\u003eMade by E-Sun\u003c\/p\u003e\n\u003cp\u003ePolyester PETG premium Refilament . It is a rigid, tough, high performance material offering excellent clarity, light transmission and high gloss.\u003c\/p\u003e\n\u003cp\u003eThe usage of PETG is comparable to the Taulman brand \"T-Glase\" filament line.\u003c\/p\u003e\n\u003cp\u003ePETG material very easy to print with and comes out great in a wide temperature range.This PETG filament is characterized by consistent quality, high dimensional accuracy and has been extensively tested on a variety of printers; yielding very strong and precise prints.\u003c\/p\u003e\n\u003cp\u003ePETG is hydrophobic and is less prone to any moisture related issues.\u003c\/p\u003e\n\u003cp class=\"p0\"\u003eOdorless; Little shrinkage rate; \u003cspan class=\"st\"\u003ehydrophobic -- does\u003c\/span\u003e not absorb water and as such clog the extruders; Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; High transparency; Good gloss; Recyclable.\u003c\/p\u003e\n\u003ch4 class=\"p0\"\u003e\u003cstrong\u003ePrint Settings\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli class=\"p0\"\u003eWeight :1.33 KG\u003c\/li\u003e\n\u003cli class=\"p0\"\u003eNet Weight :1 KG (2.2 lb)\u003c\/li\u003e\n\u003cli class=\"p0\"\u003eFilament Diameter: 1.75 mm\u003c\/li\u003e\n\u003cli class=\"p0\"\u003eTolerance :0.05 mm\u003c\/li\u003e\n\u003cli class=\"p0\"\u003ePrint temperature: 235~255℃\u003c\/li\u003e\n\u003cli class=\"p0\"\u003ePlate temperature: 80~90℃ or without heated\u003c\/li\u003e\n\u003cli class=\"p0\"\u003ePrinting speed: 30~60mm\/s\u003c\/li\u003e\n\u003cli class=\"p0\"\u003eMoving speed: 30~60mm\/\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2019-12-19T13:23:48-05:00","created_at":"2019-12-19T13:23:48-05:00","vendor":"ESUN","type":"Filaments","tags":["1.75mm","Filament","new-arrivals","PETG","PETG 1.75 mm","Refill"],"price":2499,"price_min":2499,"price_max":2499,"available":true,"price_varies":false,"compare_at_price":2899,"compare_at_price_min":2899,"compare_at_price_max":2899,"compare_at_price_varies":false,"variants":[{"id":31380676509827,"title":"Solid Black","option1":"Solid Black","option2":null,"option3":null,"sku":"PETG001-refill-1.75mm-Solid--Black","requires_shipping":true,"taxable":true,"featured_image":{"id":13632157384835,"product_id":4396021219459,"position":1,"created_at":"2019-12-19T13:44:55-05:00","updated_at":"2019-12-24T00:38:58-05:00","alt":"ESun PETG ReFilament 1.75 mm 1kg Spool - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_1.jpg?v=1577165938","variant_ids":[31380676509827]},"available":true,"name":"ESun PETG ReFilament 1.75 mm 1kg Spool - Solid Black","public_title":"Solid Black","options":["Solid Black"],"price":2499,"weight":2000,"compare_at_price":2899,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":"11000009","featured_media":{"alt":"ESun PETG ReFilament 1.75 mm 1kg Spool - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5801849192579,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_1.jpg?v=1576781095"}}},{"id":31380676542595,"title":"Solid White","option1":"Solid White","option2":null,"option3":null,"sku":"PETG001-refill-1.75mm-Solid-White","requires_shipping":true,"taxable":true,"featured_image":{"id":13632157745283,"product_id":4396021219459,"position":2,"created_at":"2019-12-19T13:45:14-05:00","updated_at":"2019-12-24T00:38:58-05:00","alt":"ESun PETG ReFilament 1.75 mm 1kg Spool - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_3.jpg?v=1577165938","variant_ids":[31380676542595]},"available":true,"name":"ESun PETG ReFilament 1.75 mm 1kg Spool - Solid White","public_title":"Solid White","options":["Solid White"],"price":2499,"weight":2000,"compare_at_price":2899,"inventory_quantity":37,"inventory_management":"shopify","inventory_policy":"deny","barcode":"11000010","featured_media":{"alt":"ESun PETG ReFilament 1.75 mm 1kg Spool - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5801849553027,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_3.jpg?v=1576781114"}}},{"id":31380676640899,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"PETG001-refill-1.75mm-Solid-Blue","requires_shipping":true,"taxable":true,"featured_image":{"id":13632157843587,"product_id":4396021219459,"position":3,"created_at":"2019-12-19T13:45:34-05:00","updated_at":"2019-12-24T00:38:58-05:00","alt":"ESun PETG ReFilament 1.75 mm 1kg Spool - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_2.jpg?v=1577165938","variant_ids":[31380676640899]},"available":true,"name":"ESun PETG ReFilament 1.75 mm 1kg Spool - Blue","public_title":"Blue","options":["Blue"],"price":2499,"weight":2000,"compare_at_price":2899,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"11000011","featured_media":{"alt":"ESun PETG ReFilament 1.75 mm 1kg Spool - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5801849651331,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_2.jpg?v=1576781134"}}},{"id":31380676804739,"title":"Natural","option1":"Natural","option2":null,"option3":null,"sku":"PETG001-refill-1.75mm-Natural","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ESun PETG ReFilament 1.75 mm 1kg Spool - Natural","public_title":"Natural","options":["Natural"],"price":2499,"weight":2000,"compare_at_price":2899,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"11000012"},{"id":31380676837507,"title":"Solid Grey","option1":"Solid Grey","option2":null,"option3":null,"sku":"PETG001-refill-1.75mm-Solid-Grey","requires_shipping":true,"taxable":true,"featured_image":{"id":13632158105731,"product_id":4396021219459,"position":4,"created_at":"2019-12-19T13:45:57-05:00","updated_at":"2019-12-24T00:38:58-05:00","alt":"ESun PETG ReFilament 1.75 mm 1kg Spool - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":892,"height":847,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_4.jpg?v=1577165938","variant_ids":[31380676837507]},"available":true,"name":"ESun PETG ReFilament 1.75 mm 1kg Spool - Solid Grey","public_title":"Solid Grey","options":["Solid Grey"],"price":2499,"weight":2000,"compare_at_price":2899,"inventory_quantity":40,"inventory_management":"shopify","inventory_policy":"deny","barcode":"11000013","featured_media":{"alt":"ESun PETG ReFilament 1.75 mm 1kg Spool - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5801849913475,"position":4,"preview_image":{"aspect_ratio":1.053,"height":847,"width":892,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_4.jpg?v=1576781157"}}},{"id":31380676870275,"title":"Green","option1":"Green","option2":null,"option3":null,"sku":"PETG001-refill-1.75mm-Solid-Green","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ESun PETG ReFilament 1.75 mm 1kg Spool - Green","public_title":"Green","options":["Green"],"price":2499,"weight":2000,"compare_at_price":2899,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"11000014"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_1.jpg?v=1577165938","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_3.jpg?v=1577165938","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_2.jpg?v=1577165938","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_4.jpg?v=1577165938"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_1.jpg?v=1577165938","options":["Color"],"media":[{"alt":"ESun PETG ReFilament 1.75 mm 1kg Spool - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5801849192579,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_1.jpg?v=1576781095"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_1.jpg?v=1576781095","width":1000},{"alt":"ESun PETG ReFilament 1.75 mm 1kg Spool - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5801849553027,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_3.jpg?v=1576781114"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_3.jpg?v=1576781114","width":1000},{"alt":"ESun PETG ReFilament 1.75 mm 1kg Spool - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5801849651331,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_2.jpg?v=1576781134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_2.jpg?v=1576781134","width":1000},{"alt":"ESun PETG ReFilament 1.75 mm 1kg Spool - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5801849913475,"position":4,"preview_image":{"aspect_ratio":1.053,"height":847,"width":892,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_4.jpg?v=1576781157"},"aspect_ratio":1.053,"height":847,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/refill_4.jpg?v=1576781157","width":892}],"content":"\u003cp\u003eMade by E-Sun\u003c\/p\u003e\n\u003cp\u003ePolyester PETG premium Refilament . It is a rigid, tough, high performance material offering excellent clarity, light transmission and high gloss.\u003c\/p\u003e\n\u003cp\u003eThe usage of PETG is comparable to the Taulman brand \"T-Glase\" filament line.\u003c\/p\u003e\n\u003cp\u003ePETG material very easy to print with and comes out great in a wide temperature range.This PETG filament is characterized by consistent quality, high dimensional accuracy and has been extensively tested on a variety of printers; yielding very strong and precise prints.\u003c\/p\u003e\n\u003cp\u003ePETG is hydrophobic and is less prone to any moisture related issues.\u003c\/p\u003e\n\u003cp class=\"p0\"\u003eOdorless; Little shrinkage rate; \u003cspan class=\"st\"\u003ehydrophobic -- does\u003c\/span\u003e not absorb water and as such clog the extruders; Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; High transparency; Good gloss; Recyclable.\u003c\/p\u003e\n\u003ch4 class=\"p0\"\u003e\u003cstrong\u003ePrint Settings\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli class=\"p0\"\u003eWeight :1.33 KG\u003c\/li\u003e\n\u003cli class=\"p0\"\u003eNet Weight :1 KG (2.2 lb)\u003c\/li\u003e\n\u003cli class=\"p0\"\u003eFilament Diameter: 1.75 mm\u003c\/li\u003e\n\u003cli class=\"p0\"\u003eTolerance :0.05 mm\u003c\/li\u003e\n\u003cli class=\"p0\"\u003ePrint temperature: 235~255℃\u003c\/li\u003e\n\u003cli class=\"p0\"\u003ePlate temperature: 80~90℃ or without heated\u003c\/li\u003e\n\u003cli class=\"p0\"\u003ePrinting speed: 30~60mm\/s\u003c\/li\u003e\n\u003cli class=\"p0\"\u003eMoving speed: 30~60mm\/\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":4393972269187,"title":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors)","handle":"esun-standard-pla-3d-filament-3d-printer","description":"\u003cp\u003e\u003cspan\u003eStandard ESUN PLA for everyday use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e15 different colors \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eSpecification：\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e- 1.75 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Made from 100% virgin PLA resin\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eCharacteristics：\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eNon harmful, non-toxic, and environment friendly; Good material toughness, good strength; Suitable for complex models; Low material shrinkage rate, uniform diameter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003ePacking：\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e- \u003c\/span\u003eNET WEIGHT PER SPOOL: 1 KG (2.2 LB)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e-  Vacuum sealed with silica gel \u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-12-18T16:34:48-05:00","created_at":"2019-12-18T16:41:38-05:00","vendor":"ESUN","type":"","tags":["1.75","1.75 mm","1.75mm","3D Filament","3D Printer Filament","esun","Filament","New","New Arrival","new-arrivals","PLA Filament","Standard PLA 1.75 mm"],"price":1699,"price_min":1699,"price_max":1699,"available":true,"price_varies":false,"compare_at_price":1999,"compare_at_price_min":1999,"compare_at_price_max":1999,"compare_at_price_varies":false,"variants":[{"id":31370578460803,"title":"black","option1":"black","option2":null,"option3":null,"sku":"ESUN-PLA-1.75-1000-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":13625485426819,"product_id":4393972269187,"position":16,"created_at":"2019-12-18T16:42:14-05:00","updated_at":"2019-12-24T00:38:59-05:00","alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/black_a389d454-6fe0-4196-b77d-dd3af03a9966.jpg?v=1577165939","variant_ids":[31370578460803]},"available":true,"name":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - black","public_title":"black","options":["black"],"price":1699,"weight":1300,"compare_at_price":1999,"inventory_quantity":30,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572257061","featured_media":{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795177234563,"position":16,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/black_a389d454-6fe0-4196-b77d-dd3af03a9966.jpg?v=1576705334"}}},{"id":31370578493571,"title":"grey","option1":"grey","option2":null,"option3":null,"sku":"ESUN-PLA-1.75-1000-GRY","requires_shipping":true,"taxable":true,"featured_image":{"id":13625486540931,"product_id":4393972269187,"position":17,"created_at":"2019-12-18T16:42:31-05:00","updated_at":"2019-12-24T00:38:59-05:00","alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/grey_aa3a4f7d-598b-42cf-a81b-187e13f02440.jpg?v=1577165939","variant_ids":[31370578493571]},"available":true,"name":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - grey","public_title":"grey","options":["grey"],"price":1699,"weight":1300,"compare_at_price":1999,"inventory_quantity":28,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572257108","featured_media":{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795178348675,"position":17,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/grey_aa3a4f7d-598b-42cf-a81b-187e13f02440.jpg?v=1576705351"}}},{"id":31370578526339,"title":"white","option1":"white","option2":null,"option3":null,"sku":"ESUN-PLA-1.75-1000-WHT","requires_shipping":true,"taxable":true,"featured_image":{"id":13625487294595,"product_id":4393972269187,"position":18,"created_at":"2019-12-18T16:42:44-05:00","updated_at":"2019-12-24T00:38:59-05:00","alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/white_ec4d43f7-c843-46de-b40a-aac56d46da15.jpg?v=1577165939","variant_ids":[31370578526339]},"available":true,"name":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - white","public_title":"white","options":["white"],"price":1699,"weight":1300,"compare_at_price":1999,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572257078","featured_media":{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795179102339,"position":18,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/white_ec4d43f7-c843-46de-b40a-aac56d46da15.jpg?v=1576705364"}}},{"id":31370578559107,"title":"silver","option1":"silver","option2":null,"option3":null,"sku":"ESUN-PLA-1.75-1000-SLV","requires_shipping":true,"taxable":true,"featured_image":{"id":13625488801923,"product_id":4393972269187,"position":19,"created_at":"2019-12-18T16:43:03-05:00","updated_at":"2019-12-24T00:38:59-05:00","alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/silver_9c8c74b7-4329-41ba-bb36-df77e276ecce.jpg?v=1577165939","variant_ids":[31370578559107]},"available":true,"name":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - silver","public_title":"silver","options":["silver"],"price":1699,"weight":1300,"compare_at_price":1999,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572257214","featured_media":{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795180609667,"position":19,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/silver_9c8c74b7-4329-41ba-bb36-df77e276ecce.jpg?v=1576705383"}}},{"id":31370578591875,"title":"blue","option1":"blue","option2":null,"option3":null,"sku":"ESUN-PLA-1.75-1000-BLU","requires_shipping":true,"taxable":true,"featured_image":{"id":13625480708227,"product_id":4393972269187,"position":2,"created_at":"2019-12-18T16:41:38-05:00","updated_at":"2019-12-24T00:38:59-05:00","alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/blue_3a8794b9-2b02-4bda-b143-4d71deb1d97a.jpg?v=1577165939","variant_ids":[31370578591875]},"available":true,"name":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - blue","public_title":"blue","options":["blue"],"price":1699,"weight":1300,"compare_at_price":1999,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572257092","featured_media":{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795172515971,"position":2,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/blue_3a8794b9-2b02-4bda-b143-4d71deb1d97a.jpg?v=1576705298"}}},{"id":31370578624643,"title":"fire engine red","option1":"fire engine red","option2":null,"option3":null,"sku":"ESUN-PLA-1.75-1000-FER","requires_shipping":true,"taxable":true,"featured_image":{"id":13625480806531,"product_id":4393972269187,"position":4,"created_at":"2019-12-18T16:41:38-05:00","updated_at":"2019-12-24T00:38:59-05:00","alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/fire_engine_red.jpg?v=1577165939","variant_ids":[31370578624643]},"available":true,"name":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - fire engine red","public_title":"fire engine red","options":["fire engine red"],"price":1699,"weight":1300,"compare_at_price":1999,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572257085","featured_media":{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795172614275,"position":4,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/fire_engine_red.jpg?v=1576705298"}}},{"id":31370578657411,"title":"yellow","option1":"yellow","option2":null,"option3":null,"sku":"ESUN-PLA-1.75-1000-YLW","requires_shipping":true,"taxable":true,"featured_image":{"id":13625491390595,"product_id":4393972269187,"position":20,"created_at":"2019-12-18T16:43:33-05:00","updated_at":"2019-12-24T00:38:59-05:00","alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/yellow_2643a20c-1292-4d13-ae99-4a9f02a89b19.jpg?v=1577165939","variant_ids":[31370578657411]},"available":true,"name":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - yellow","public_title":"yellow","options":["yellow"],"price":1699,"weight":1300,"compare_at_price":1999,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572257788","featured_media":{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795183198339,"position":20,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/yellow_2643a20c-1292-4d13-ae99-4a9f02a89b19.jpg?v=1576705413"}}},{"id":31370578690179,"title":"orange","option1":"orange","option2":null,"option3":null,"sku":"ESUN-PLA-1.75-1000-ORG","requires_shipping":true,"taxable":true,"featured_image":{"id":13625480970371,"product_id":4393972269187,"position":8,"created_at":"2019-12-18T16:41:38-05:00","updated_at":"2019-12-24T00:38:59-05:00","alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/orange_a5cf9f8f-e760-4866-9255-f61196e60da5.jpg?v=1577165939","variant_ids":[31370578690179]},"available":true,"name":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - orange","public_title":"orange","options":["orange"],"price":1699,"weight":1300,"compare_at_price":1999,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572257160","featured_media":{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795172778115,"position":8,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/orange_a5cf9f8f-e760-4866-9255-f61196e60da5.jpg?v=1576705298"}}},{"id":31370578722947,"title":"light blue","option1":"light blue","option2":null,"option3":null,"sku":"ESUN-PLA-1.75-1000-LTBLU","requires_shipping":true,"taxable":true,"featured_image":{"id":13625480937603,"product_id":4393972269187,"position":7,"created_at":"2019-12-18T16:41:38-05:00","updated_at":"2019-12-24T00:38:59-05:00","alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/light_blue.jpg?v=1577165939","variant_ids":[31370578722947]},"available":true,"name":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - light blue","public_title":"light blue","options":["light blue"],"price":1699,"weight":1300,"compare_at_price":1999,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572257146","featured_media":{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795172745347,"position":7,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/light_blue.jpg?v=1576705298"}}},{"id":31370578755715,"title":"purple","option1":"purple","option2":null,"option3":null,"sku":"ESUN-PLA-1.75-1000-PRPL","requires_shipping":true,"taxable":true,"featured_image":{"id":13625481298051,"product_id":4393972269187,"position":11,"created_at":"2019-12-18T16:41:38-05:00","updated_at":"2019-12-24T00:38:59-05:00","alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/purple.jpg?v=1577165939","variant_ids":[31370578755715]},"available":true,"name":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - purple","public_title":"purple","options":["purple"],"price":1699,"weight":1300,"compare_at_price":1999,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572257153","featured_media":{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795173105795,"position":11,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/purple.jpg?v=1576705298"}}},{"id":31370578788483,"title":"red","option1":"red","option2":null,"option3":null,"sku":"ESUN-PLA-1.75-1000-RED","requires_shipping":true,"taxable":true,"featured_image":{"id":13625493061763,"product_id":4393972269187,"position":21,"created_at":"2019-12-18T16:43:59-05:00","updated_at":"2019-12-24T00:38:59-05:00","alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/red_727ff0ff-cbb7-4672-a64e-4f48b688145d.jpg?v=1577165939","variant_ids":[31370578788483]},"available":true,"name":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - red","public_title":"red","options":["red"],"price":1699,"weight":1300,"compare_at_price":1999,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572257160","featured_media":{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795184869507,"position":21,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/red_727ff0ff-cbb7-4672-a64e-4f48b688145d.jpg?v=1576705439"}}},{"id":31370578821251,"title":"green","option1":"green","option2":null,"option3":null,"sku":"ESUN-PLA-1.75-1000-GRN","requires_shipping":true,"taxable":true,"featured_image":{"id":13625480839299,"product_id":4393972269187,"position":5,"created_at":"2019-12-18T16:41:38-05:00","updated_at":"2019-12-24T00:38:59-05:00","alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/green_69c65116-6dde-4b69-9f03-b9b704098103.jpg?v=1577165939","variant_ids":[31370578821251]},"available":true,"name":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - green","public_title":"green","options":["green"],"price":1699,"weight":1300,"compare_at_price":1999,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572257177","featured_media":{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795172647043,"position":5,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/green_69c65116-6dde-4b69-9f03-b9b704098103.jpg?v=1576705298"}}},{"id":31370578854019,"title":"peak green","option1":"peak green","option2":null,"option3":null,"sku":"ESUN-PLA-1.75-1000-PKGRN","requires_shipping":true,"taxable":true,"featured_image":{"id":13625481068675,"product_id":4393972269187,"position":9,"created_at":"2019-12-18T16:41:38-05:00","updated_at":"2019-12-24T00:38:59-05:00","alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/peak_green.jpg?v=1577165939","variant_ids":[31370578854019]},"available":true,"name":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - peak green","public_title":"peak green","options":["peak green"],"price":1699,"weight":1300,"compare_at_price":1999,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572257184","featured_media":{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795172876419,"position":9,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/peak_green.jpg?v=1576705298"}}},{"id":31370578886787,"title":"pink","option1":"pink","option2":null,"option3":null,"sku":"ESUN-PLA-1.75-1000-PNK","requires_shipping":true,"taxable":true,"featured_image":{"id":13625481199747,"product_id":4393972269187,"position":10,"created_at":"2019-12-18T16:41:38-05:00","updated_at":"2019-12-24T00:38:59-05:00","alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/pink_f190c60a-10e2-4622-b2f0-579777a5f2e3.jpg?v=1577165939","variant_ids":[31370578886787]},"available":true,"name":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - pink","public_title":"pink","options":["pink"],"price":1699,"weight":1300,"compare_at_price":1999,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572257191","featured_media":{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795173007491,"position":10,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/pink_f190c60a-10e2-4622-b2f0-579777a5f2e3.jpg?v=1576705298"}}},{"id":31370578919555,"title":"brown","option1":"brown","option2":null,"option3":null,"sku":"ESUN-PLA-1.75-1000-BRN","requires_shipping":true,"taxable":true,"featured_image":{"id":13625480740995,"product_id":4393972269187,"position":3,"created_at":"2019-12-18T16:41:38-05:00","updated_at":"2019-12-24T00:38:59-05:00","alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/brown_ac8f703b-11f4-48ac-bad5-bb55fd5a1966.jpg?v=1577165939","variant_ids":[31370578919555]},"available":true,"name":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - brown","public_title":"brown","options":["brown"],"price":1699,"weight":1300,"compare_at_price":1999,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572257207","featured_media":{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795172548739,"position":3,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/brown_ac8f703b-11f4-48ac-bad5-bb55fd5a1966.jpg?v=1576705298"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/black_c6eab9d7-94f7-48e9-b371-203271ec04bb.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/blue_3a8794b9-2b02-4bda-b143-4d71deb1d97a.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/brown_ac8f703b-11f4-48ac-bad5-bb55fd5a1966.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/fire_engine_red.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/green_69c65116-6dde-4b69-9f03-b9b704098103.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/grey_8ad18616-9726-477c-a2a0-39fee22c2d27.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/light_blue.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/orange_a5cf9f8f-e760-4866-9255-f61196e60da5.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/peak_green.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/pink_f190c60a-10e2-4622-b2f0-579777a5f2e3.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/purple.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/red_01694935-29b3-41b3-bbb6-3d3930414bc4.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/silver_9aee3619-087a-40ab-84d5-995f7efe4d2f.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/white_ee8752df-93a5-4ab5-9618-935b90850995.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/yellow_2c6eab28-60ca-405d-a76c-8789f87b8138.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/black_a389d454-6fe0-4196-b77d-dd3af03a9966.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/grey_aa3a4f7d-598b-42cf-a81b-187e13f02440.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/white_ec4d43f7-c843-46de-b40a-aac56d46da15.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/silver_9c8c74b7-4329-41ba-bb36-df77e276ecce.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/yellow_2643a20c-1292-4d13-ae99-4a9f02a89b19.jpg?v=1577165939","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/red_727ff0ff-cbb7-4672-a64e-4f48b688145d.jpg?v=1577165939"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/black_c6eab9d7-94f7-48e9-b371-203271ec04bb.jpg?v=1577165939","options":["Color"],"media":[{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795172483203,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/black_c6eab9d7-94f7-48e9-b371-203271ec04bb.jpg?v=1576705298"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/black_c6eab9d7-94f7-48e9-b371-203271ec04bb.jpg?v=1576705298","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795172515971,"position":2,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/blue_3a8794b9-2b02-4bda-b143-4d71deb1d97a.jpg?v=1576705298"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/blue_3a8794b9-2b02-4bda-b143-4d71deb1d97a.jpg?v=1576705298","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795172548739,"position":3,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/brown_ac8f703b-11f4-48ac-bad5-bb55fd5a1966.jpg?v=1576705298"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/brown_ac8f703b-11f4-48ac-bad5-bb55fd5a1966.jpg?v=1576705298","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795172614275,"position":4,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/fire_engine_red.jpg?v=1576705298"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/fire_engine_red.jpg?v=1576705298","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795172647043,"position":5,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/green_69c65116-6dde-4b69-9f03-b9b704098103.jpg?v=1576705298"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/green_69c65116-6dde-4b69-9f03-b9b704098103.jpg?v=1576705298","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795172679811,"position":6,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/grey_8ad18616-9726-477c-a2a0-39fee22c2d27.jpg?v=1576705298"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/grey_8ad18616-9726-477c-a2a0-39fee22c2d27.jpg?v=1576705298","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795172745347,"position":7,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/light_blue.jpg?v=1576705298"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/light_blue.jpg?v=1576705298","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795172778115,"position":8,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/orange_a5cf9f8f-e760-4866-9255-f61196e60da5.jpg?v=1576705298"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/orange_a5cf9f8f-e760-4866-9255-f61196e60da5.jpg?v=1576705298","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795172876419,"position":9,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/peak_green.jpg?v=1576705298"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/peak_green.jpg?v=1576705298","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795173007491,"position":10,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/pink_f190c60a-10e2-4622-b2f0-579777a5f2e3.jpg?v=1576705298"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/pink_f190c60a-10e2-4622-b2f0-579777a5f2e3.jpg?v=1576705298","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795173105795,"position":11,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/purple.jpg?v=1576705298"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/purple.jpg?v=1576705298","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795173138563,"position":12,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/red_01694935-29b3-41b3-bbb6-3d3930414bc4.jpg?v=1576705298"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/red_01694935-29b3-41b3-bbb6-3d3930414bc4.jpg?v=1576705298","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795173171331,"position":13,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/silver_9aee3619-087a-40ab-84d5-995f7efe4d2f.jpg?v=1576705298"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/silver_9aee3619-087a-40ab-84d5-995f7efe4d2f.jpg?v=1576705298","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795173236867,"position":14,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/white_ee8752df-93a5-4ab5-9618-935b90850995.jpg?v=1576705298"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/white_ee8752df-93a5-4ab5-9618-935b90850995.jpg?v=1576705298","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795173269635,"position":15,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/yellow_2c6eab28-60ca-405d-a76c-8789f87b8138.jpg?v=1576705298"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/yellow_2c6eab28-60ca-405d-a76c-8789f87b8138.jpg?v=1576705298","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795177234563,"position":16,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/black_a389d454-6fe0-4196-b77d-dd3af03a9966.jpg?v=1576705334"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/black_a389d454-6fe0-4196-b77d-dd3af03a9966.jpg?v=1576705334","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795178348675,"position":17,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/grey_aa3a4f7d-598b-42cf-a81b-187e13f02440.jpg?v=1576705351"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/grey_aa3a4f7d-598b-42cf-a81b-187e13f02440.jpg?v=1576705351","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795179102339,"position":18,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/white_ec4d43f7-c843-46de-b40a-aac56d46da15.jpg?v=1576705364"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/white_ec4d43f7-c843-46de-b40a-aac56d46da15.jpg?v=1576705364","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795180609667,"position":19,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/silver_9c8c74b7-4329-41ba-bb36-df77e276ecce.jpg?v=1576705383"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/silver_9c8c74b7-4329-41ba-bb36-df77e276ecce.jpg?v=1576705383","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795183198339,"position":20,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/yellow_2643a20c-1292-4d13-ae99-4a9f02a89b19.jpg?v=1576705413"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/yellow_2643a20c-1292-4d13-ae99-4a9f02a89b19.jpg?v=1576705413","width":650},{"alt":"ESUN Standard 1.75 mm PLA 1kg with Silica Gel (Various Colors) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":5795184869507,"position":21,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/red_727ff0ff-cbb7-4672-a64e-4f48b688145d.jpg?v=1576705439"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/red_727ff0ff-cbb7-4672-a64e-4f48b688145d.jpg?v=1576705439","width":650}],"content":"\u003cp\u003e\u003cspan\u003eStandard ESUN PLA for everyday use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e15 different colors \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eSpecification：\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e- 1.75 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Made from 100% virgin PLA resin\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eCharacteristics：\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eNon harmful, non-toxic, and environment friendly; Good material toughness, good strength; Suitable for complex models; Low material shrinkage rate, uniform diameter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003ePacking：\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e- \u003c\/span\u003eNET WEIGHT PER SPOOL: 1 KG (2.2 LB)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e-  Vacuum sealed with silica gel \u003c\/span\u003e\u003c\/p\u003e"}