- Home
- 3D Printer Parts

Keep your printer running with our wide selection of upgrades.
We provide upgrades for nozzles, heat breaks, heat sinks, extruders and much more. We only source from the best manufacturers in the business. From Bondtech, Micro Swiss, E3D, Duet, Flashforge, Creality, Intamsys, Capricorn and many more.
Digitmakers.ca is your one-stop shop for your 3D printer needs.
Keep 3D Printing, Canada!
3D Printer Parts

J-HEAD MKIV HOTEND FOR REPRAP 3D PRINTERS
$39.99 CAD
J-Head MKIV Hotend is innovative light weight and simple . it works with most reprap extruders. Comes with heater cartridge and Thermostier • Efficient heat transfer by eliminating the thermal conductivity from the hot end. • PTFE tubing (replaceable) connect or join between the PEEK insulator and the Aluminum Nozzle. • Light Weight • Plated ...

3D Printer Extruder Drive Gear for 1.75mm & 3mm – Brass Pulley 5mm
$2.49 CAD
3D Printer Extruder Drive Gear for 1.75mm & 3mm Filament – Brass Pulley 5mm Description Size: 11 mm x 11 mm Inner hole: 5 mm Gear parts: 7 mm Material: Brass Fixed screw holes: the M3 thread, two fixed screw holes, fixed more strong, can better avoid skidding gear. Gear diameter: 11 mm Within the fixed screw: M3, six Angle Package Includ...

3D printer Flexible Helical Coupling Set of 2
$9.99 CAD
Product Weight: 0.014 kg Holes Size: 5 mm / 8 mm 6 mm Length: 25 mm Product Size: 2.4 x 1.7 x 1.9 cm / 0.94 x 0.67 x 0.75 inches

3D printer Heatsink 40*40*11mm heating block
$2.49 CAD
Center hole goods size : 12 mm Screw mounting hole: 3 mm Mounting holes from: 31 mm Fin length: 40 mm ,width: 40 mm, Thickness: 11 mm

Generic MK10 PTFE Tube
$3.50 CAD
MK10 PTFE insert ID2 mm , OD 4 mm The PTFE used inside the MK10 Extruder to provide smooth way to the filament and prevent the filament from deforming before it reaches the nozzle. Approximately 60mm long.

Long Type Linear Ball Bearing Bushing LM8LUU
$4.49 CAD
Long Type Linear Ball Bearing Bushing Model:LM8LUU Size: 8mm(ID)x15mm(OD)x45mm(L) Upgrade your 3D printer and reduce the play in the linear ball bearing . This longer Linear bearing provide more stability and smoothness to your x, y axis.
Micro Swiss All Metal Hotend with SLOTTED Cooling Block for Duplicator 6
Parts

Micro Swiss All Metal Hotend with SLOTTED Cooling Block for Duplicator 6
$75.99 CAD
This is Micro Swiss All Metal Hotend kit for Wanhao Duplicator 6 with the following enhancement : Slotted Clamping system No set screw to ding and damage the thermal tube Significantly better heat transfer (this is a big one!!!) Easier disassembly and adjustments Precise control on bore diameter Micro Swiss All Metal Hotend Kit Feature...

Micro Swiss MK10 SLOTTED Cooling Block
$28.99 CAD
This is redesigned cooling block for Wanhao i3 and Wanhao i3 plus with the following improvements: Slotted Clamping system No set screw to ding and damage thermal tube Significantly better heat transfer Easier disassemble and adjustments Precise control on bore diameter This cooling block will work with original PTFE lined hotend, and w...

Lead Screw with Nut 500mm
$19.99 CAD
Lead Screws with Nut Used for Z axis 3D printer , Upgrade your printer and print longer parts. Lead Screw Diameter: 8mm Screw Pitch: 2mm Lead: 8mm Lead Screw Length: 500mm

3D PRINTER HEATER CARTRIDGE 12V 40W FOR HOTEND
$7.99 CAD
HEATER CARTRIDGE 12V 40W FOR HOTEND Feature Material Stainless Steel, PVC, Nylon Voltage 12V Power 40W Resistance 5 ohm Heater size 6x20mm(D*L) Wire Length 500mm

3D PRINTER HEATER CARTRIDGE 24V 40W FOR HOTEND
$7.99 CAD
HEATER CARTRIDGE 24 V 40W FOR HOTEND Feature Material Stainless Steel, PVC, Nylon Voltage 24 V Power 40W Heater (D*L)Wire Length500mmResistance size6x20mm Heater size 6x20mm(D*L) Wire Length 500mm

3D PRINTER 2004 LCD SMART CONTROLLER DISPLAY
$19.99 CAD
3D PRINTER REPRAP RAMPS 1.4 2004 LCD SMART CONTROLLER DISPLAY ADAPTER The controller includes an SD card reader, rotary encoders and a 20-character x 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using "smart adapter" (included). No need to your computer All further operations, such as calibration, the axis movement can...

3D Printer A4988 Stepper Motor Driver
$5.49 CAD
3D Printer Stepper A4988 Driver for 3D Printer controllers Dimensions: 0.83 in x 0.63 in x 0.47 in (2.1 cm x 1.6 cm x 1.2 cm) Weight: 0.18 oz (5 g) Color: Green + black Material: PCB + plastic Specification: PCB copper clad process upgrade to 2oz; SMT manufacturing Features Voltage: 1.25V; Current: 1.56A

MKS-Gen V1.4 Motherboard
$48.99 CAD
Content MKS-Gen V1.4 motherboard * 1pcs; USB cable * 1pcs Note: Stepper Drivers Sold Separately HERE Works with Arduino IDE 1.5.9 or older Features: The 2560 and ramps1.4 collection on a board to solve the Ramps1.4 combined interface cumbersome, prone problem failures. Replace the motor drive, support for 4988 and 8825 driving. Cir...

3D Printer- MK3 ALU-Heated bed 3.2mm (12V-24V Dual Power)
$34.99 CAD
Do you have 3D Printer Aluminum plate On top of PCB Hot Bed? Now all in one 3d Printer heated bed that combine Aluminum with PCB , offers connivance and light-weight, which contribute for better printing quality. 3d Printer Heated bed with 3.2mm Aluminum Core. Print directly on the heated bed, no need for glass plate. It's a much lighter solu...

Auto-Leveling 4MM Inductive Metal Proximity Sensor hardware
$9.99 CAD
The Metal Proximity Sensor, or non-contact proximity switch contains of generator and shaping amplifier oscillator vibration in the switch after induction head, and produces an alternating magnetic field when the metal body detected. This Inductive Proximity Sensor has high sensitivity, fast frequency response, high repeat positioning accura...

DRV8825 Stepper Motor Driver Carrier- Header Pins Soldered
$5.49 CAD
Comes in Black or Purple colors The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pin-out and interface that are nearly identical to those of our A4988 stepper motor driver board, so it can be used as a higher-performance drop-in replacement for those boa...

Micro Switch Limit Switch for Duplicator i3
$2.50 CAD
One miniature snap-action micro switch with pin plunger.

Micro Switch SS-5GL
$2.50 CAD
Limit Switch for 3d printer

MK2 HEATBED 12-24 volts , Internal Thermistor
$19.99 CAD
LED, Resistor and internal Thermistor Soldered Laminate: FR4 1.6±0.15mm Two layer, 35μm copper,Copper plated holes Power Input: 12Vdc Resistance between 1-2 ohm Dimensions 214mmx 214mm

Optical Endstop (Limit-Switch) for 3D Printers RAMPS 1.4
$2.99 CAD
Optical Endstop Light Control Limit Optical Switch for 3D Printers RAMPS 1.4 with cable . Description: The optical endstop is a reliable endstop / switch solution for any type of 3D printers and other CNC and/ or 3D tools. Compatible with RAMPS 1.4 board Package included: 1x optical endstop 1x 50cm 3pin connecting cable

Thermistor For 3D Printer
$5.00 CAD
100K ohm NTC 3950 1% Thermistors with Cable Wire High Temperature Resistance for 3D Printer Reprap Mendel

Thermocouples 4x30 MM Stainless Steel-Pack of Two
$8.99 CAD
Two Pcs Thermocouples Model Number: K Type Thermocouple Operating Temperature: 0~600 ℃ Wire core material: Nickel - chromium Alloy Probe Diameter: 4mm Probe Length: 30mm Wire core diameter: 0.4mm * 2 Cable Length: 1 M Cable External Shielding: Stainless Steel Braiding Cable Internal Insulation: Fiberglass

Flashforge Creator Pro Controller
$249.99 CAD
Flashforge Creator Pro Latest version controller . Note: Cables are not included.

E3D V6/V6 Lite HotEnd Metal Parts Only - Universal
$64.00 CAD
This Genuine E3D kit is intended for those with some experience who may already have many parts included in the full kit to hand already. This kit requires extra parts such as electronics, wiring, etc to complete its functionality. If you are at all unsure as to whether you should order this or the full kit you should purchase the full kit as i...

E3D V6 Upgrade Kit - Block & Sock
$33.00 CAD
This Genuine E3D Package Contains all you'll need to upgrade your standard E3Dv6 hotend to the new Sock & Thermistor Cartridge Block. V6 cartridge-style heater block Silicone Sock V6 (x3) The new cartridge thermistor Thermistor cable Fixings Silicone Socks: These socks will keep your nozzle clean and free of burnt on blackened plastic. T...

E3D Nozzle Fun Pack
$54.74 CAD
A full collection of E3D-v6 Ecosystem nozzles, set in a laser-cut plywood stand for easy nozzle identification. Print all the things in all the resolutions! Suitable for all 1.75mm E3D Hotends except for Cyclops. We've included the full range of nozzles for those who want to explore the limits of high resolution printing with small nozzles, as w...

E3D Chimera - 2 In, 2 Out Extrusion
$179.99 CAD
The Chimera 2 In, 2 Out - Dual Extrusion System Chimera is a neat and simple way in which to add conventional dual extrusion to your machine in a simple, air cooled package. Nozzles can be individually adjusted in height for an easy setup experience. Each nozzle is individually temperature controllable for ultimate material versatility. Chimera ...

E3D Experimental High-Resolution V6 -0.15 Nozzle 1.75mm
$20.99 CAD
E3D HotEnds (v6, lite6, Chimera and Kraken) use the same standard nozzle format that can be easily changed out in order to tune the printing speed and resolution to best fit your needs. In our latest v6 nozzles, the range of nozzle diameters each have tailored internal and external geometry to match the flow rates and track width associated with...

E3D - V6 Extra Nozzles 1.75/3mm
$15.45 CAD
Genuine E3D HotEnds (v6, lite6, Chimera and Kraken) use the same standard nozzle format that can be easily changed out in order to tune the printing speed and resolution to best fit your needs. In our latest v6 nozzles, the range of nozzle diameters each have tailored internal and external geometry to match the flow rates and track width associa...

GT2 Timing Belt 6 mm width
$6.99 CAD
Belt width is 6mm. Tooth pitch is 2mm. Price for the GT2 timing belt is per meter. For quantity, please enter the number of continuous meters you require (up to 15m continuous length).

PTFE Teflon Tube
$5.50 CAD
Unit of measure: Per meter. Up to 10 meters continuous ID 2 mm x OD 4 mm: Used for 1.75 mm filaments , Bowden and inside the Heat Break. ID 3 mm x OD 4 mm: Used for 1.75 mm Filaments as filaments guide ID 4 mm x OD 6 mm: Used for 2.85 mm / 3 mm Filaments

Micro Swiss Brass Plated Wear Resistant Nozzle MK8 1.75mm
$19.99 CAD
This is an MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are ...

Micro Swiss CNC Machined Lever for Wanhao Duplicator 6 extruder
$25.00 CAD
This is a replacement lever for Wanhao Duplicator 6. Lever is CNC machined from 6061 billet aluminum, with weight reduction features. To match extruder color, this lever is anodized with matte black anodizing. It will replace a stock plastic lever that has tendency to warp over time from heat and force. This is a direct replacement, with no mod...

Micro Swiss nozzle for MK10 All Metal Hotend Variable Diameter
$18.95 CAD
This is an MK10 style nozzle made by Micro Swiss. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE codeposit. This coating is also very hard and abrasion r...

MKS MOSFET Heating Controller HOTBED-MOS+ V1.0
$18.99 CAD
High performance of MOSFET Extra large heat sink , the maximum current can be up to 30A or more. Can use hot bed output signal of Ramp1.4 and MKS series to control . Can use digital signal of 5-24v to control . Usage 1. Connect Power to power source, please note the anode and cathode. 2. Connect Hotbed to heated wire , please note t...

MKS TFT28 v1.2 Touch Screen
$49.00 CAD
Digitmakers.ca is not responsible for board damage that is caused by being wrong connections , please refer to the available online resources for connections and firmware updates. MKS TFT28 Touch Screen MKS-TFT28 is a colorful touch screen LCD, designed by MAKER BASE(MKS) and suitable for many open source 3D Printers. MKS-TFT28 is suitable for...

GT2 Timing Belt 10 mm width
$6.99 CAD
Belt width is 10mm. Tooth pitch is 2mm. Price for the GT2 timing belt is per meter. For quantity, please enter the number of continuous meters you require (up to 15m continuous length).

Aluminum GT2 Timing Pulley - 6mm Belt - 16 Tooth - 5mm Bore
$4.99 CAD
GT2 aluminum timing pulley. Inner diameter: 5mm Outer diameter: 13mm Height: 14mm Teeth: 16 Tooth diameter: 9.5mm Tooth width: 7.3mm Package contents: 1 GT2 aluminum timing pulley with 16 teeth.

Aluminum GT2 Timing Pulley - 10 mm belt - 20 Tooth - 5mm Bore - 2 Grub Screws
$4.99 CAD
GT2 aluminum timing pulley with grub screws Inner diameter: 5mm Outer diameter: Approx. 16mm Height: approx. 19mm Teeth: 20 Tooth diameter: 12.3mm Tooth width: 11mm Package contents: 1 GT2 aluminum timing pulley with 20 teeth and 2 grub screws.

Aluminum GT2 Timing Pulley - 10 mm belt - 16 Tooth - 5mm Bore
$4.99 CAD
GT2 aluminum timing pulley. Inner diameter: 5mm Outer diameter: Approx. 16mm Height: approx. 19mm Teeth: 16 Tooth diameter: 12.3mm Tooth width: 11mm Package contents: 1 GT2 aluminum timing pulley with 16 teeth.

F604ZZ Flange ball Bearing
$3.00 CAD
Two 604ZZ Bearings Inner diameter: 4mm Outer diameter: 12mm Height: 4mm Flange Width: 1mm

Raise3D N2/N2 Plus Borosilicate Glass Build Plate
$71.99 CAD
Borosilicate Glass Heated Bed, used with Raise3D N2 /N2+ 3d printers