- Home
- Adhesive & Lubricants
Adhesive & Lubricants

Prusa Lubricant Applicator Set (5g)
$8.99 CAD
Universal lubricant with applicator for printer maintenance. Your printer should be after a certain period of time cleaned and greased in order to work properly. More information including pictures is in the online service manual. No need to apply this lubricant during the first assembly of the kit, all parts are greased by the manufacturer.

GD900 Thermal Grease Paste
$4.99 CAD
GD Brand GD900 thermal grease. It contains tiny particles of metal oxide as the main raw materials for filling the gap between the heating source and heat sink device. Its has outstanding performance on heat break and blocks. Product features:RoHS environmental protection requirements. High thermal conductivity, effective insulation, high temper...

Slice Engineering Boron Nitride Paste
$14.99 CAD
Thermal paste for improving conduction Acts as a release agent Use the included applicator to coat the cartridge heater hole in your 3D printer heat block. Insert the cartridge heater while the paste is still wet, then let dry. The boron nitride boosts dissipation of heat from the hot section of the cartridge heater, improving its life. Retails...

Dimafix Glue (90 ml)
$24.99 CAD
Dimafix Pen (90ml) is a new product based on the Dimafix Spray formula. The Dimafix Pen maintains the same adhesion properties of Dimafix Spray format but in dabber liquid bottle format. It has been known to last as much as 100 uses (your mileage may vary depending on bed size). It is water soluble so it is easy to clean. It works on a wider ran...

Visionminer - Nano Polymer Adhesive Sample - 10mL
$8.99 CAD
Visionminer Nano Polymer Adhesive Sample Bottle - 10mL Designed for PEEK, Ultem™, PPSU, and other high-performance FDM polymers, this build plate glue works for nearly every filament - Nylon, ABS, PLA, PETG, PEI, PSU, and every filament we've tested so far.Not only that, but it works on multiple build surfaces as well: Borosilicate glass, cerami...

Vision Miner - Nano Polymer Adhesive - Various Sizes
$26.99 CAD
Vision Miner Nano Polymer Adhesive Designed for PEEK, Ultem™, PPSU, and other high-performance FDM polymers, this build plate glue works for nearly every filament - Nylon, ABS, PLA, PETG, PEI, PSU, and every filament we've tested so far.Not only that, but it works on multiple build surfaces as well: Borosilicate glass, ceramic glass, PCB board, ...