Your cart is empty
Looks like you haven't added anything to your cart yet
|
P2S Combo (With AMS 2 Pro) | ||
|
P2S (No AMS) |
Please Note : This product does not qualify for free shipping.
Get started with 3D printing the right way with this starter kit bundle:
Bambu Lab 3D Printer Starter Kit Bundle
Bambu Lab P2S
The Icon, Redefined.
Highlights
5-inch Refreshed Touchscreen
Cold-Air Cooling
Engineering Filaments Ready
Quick-Swap Nozzle
PMSM Servo Extruder
Silky-Smooth Liveview
Auto Flow Dynamics Calibration
Active Venting Filament Drying
AI Error Detection
The User Experience As Good As A Smartphone.
The P2S features a fully upgraded touchscreen and a powerful processor, running our new intuitive second-generation UI. Enjoy smoother interactions, richer graphics, and clearer step-by-step instructions.
5-inch Touch Screen ｜ 2nd-Gen UI
70% More Extrusion Force & Real-Time Error Detection.
The PMSM servo extruder delivers up to 8.5 kg of maximum extrusion force—70% more than its predecessor—dramatically improves high-flowrate extrusion stability. Our proprietary servo architecture samples resistance and position at 20 kHz, actively detecting filament grinding and clogs in real time.
PMSM Servo Architecture ｜ DynaSense Extruder
Print Smooth At Every Corner, Always.
The P2S uses a high-resolution, high-frequency eddy current sensor to calibrate flow dynamics. Intelligent algorithms actively adjust the flow rate based on these readings, provide precise, consistent extrusion across every layer and corner.
Active Flowrate Compensation ｜ Eddy Current Pressure Sensor
Adaptive Airflow System
Perfect Overhang No Matter the Filament or Temperature.
Unlike traditional cooling systems that recirculate hot air, the P2S’s Adaptive Airflow System draws in cool air directly from outside the chamber. This significantly improves cooling efficiency, letting you confidently print low-temperature filaments with the door closed—without worrying about overhang quality or nozzle clogs.
Cold-Air Intake ｜ Cooling Mode
Adaptive Airflow System
50°C Chamber Ready For Engineering-Grade Filaments.
The P2S features a flap-controlled Adaptive Airflow System that efficiently seals heat within the chamber while actively filtering the internal air through a high-performance carbon filter. This allows you to confidently print demanding engineering filaments prone to warping, all while maintaining clean, safe air quality in your workspace.
Heat Preservation ｜ Carbon Filter
Peace Of Mind, Everytime You Print.
The P2S introduces advanced AI computer vision that actively detects common printing issues such as spaghetti, nozzle blobbing. It also checks your print start settings, ensuring a safe and accurate start to every print job.
AI Error Detection ｜ 2 TOPS NPU
Start Check
Spaghetti
Nozzle Clumping
Purge Chute Jam
30-Second Nozzle Swap.
The P2S features a quick-swap hotend design with a simple one-clip mechanism that releases the entire nozzle and heatsink assembly—no wiring disconnection required. This drastically reduces nozzle change time and eliminates the risk of wiring errors.
Quick Swap Hotend ｜ 1-Clip Design
No-Lag Liveview & High-Quality Timelapse.
Enhanced LED lighting dramatically improves the clarity of your liveview video and timelapses. Paired with a high-frame-rate camera & Dual-band Wi-Fi, you can comfortably monitor your printer remotely and capture beautifully illuminated timelapses perfect for sharing on social media.
"Stage" Lighting ｜ 1080P High-Rate Camera
Reliable for Fiber-Reinforced Material Printing.
P2S's extrusion system and nozzle are crafted from hardened steel, offering exceptional durability and wear resistance. Designed specifically for stable, long-term printing of high-performance fiber-reinforced materials.
Hardened Steel Nozzle ｜ Hardened Steel Extruder Gear
AMS 2 Pro
Multi-Color Printing & Filament Drying, All in One Box.
Experience our most reliable multi-color printing system yet. The AMS 2 Pro features an enhanced design for a better user experience and, crucially, introduces long-awaited filament drying. A pioneering active venting system dries filament 30% faster than sealed heating, maintaining low humidity for superior storage and print quality.
Auto Venting Filament Drying ｜ Multi-Color Printing
Electromagnetic Air Vent
Automated venting facilitates dehumidification during drying and airtight sealing for weeks of quality printing.
Faster Multi-Color Printing
The PMSM feeding motor accelerates filament feeding by 60%, saving an average of 10 minutes for every 100 filament changes.
Formula Race Car
Steering Wheel
P51 Mustang
Over A Million High-Quality Models For You to Print.
MakerWorld
Over a Million Models at Your Fingertips
On MakerWorld, you'll find an endless supply of great models, all ready for your P2S. With seamless integration, you can skip the hassle of figuring out settings or slicing. The perfect print profiles for your specific printer and filaments are already in place. Simply hit print and get started! This kind of effortless printing is standard on MakerWorld, so you'll always have something new to try, and your printer can keep busy!
MakerLab
AI Assisted 3D Modeling Tools, Bring Your Vision to Life
Transform your favorite artwork into a personalized lightbox, turn a beloved photo into a relief sculpture, or create one-of-a-kind PrintMon figurines from a simple prompt. With Bambu Lab MakerLab, you can design and customize without any 3D modeling skills. Create a bookmark with your favorite characters, or an organizer tailored to your desk, with the perfect spot for sticky notes. Whatever you envision, you can create.
Maker's Supply
Go-To Source for Parts that Bring 3D Prints to Life
Maker's Supply provides all the non-3D printed hardware you need for your projects, from motors and LEDs to bolts and magnets. Every pre-tested kit precisely matches the Bill of Materials (BOM) for your chosen MakerWorld project. Just print, assemble, and enjoy!
Perfection, Detail by Detail.
The P2S features numerous refinements that enhance the user experience. While these incremental improvements may not be immediately apparent, they embody the level of perfection Bambu Lab constantly pursues.
Built-in 2-in-1 Buffer (equipped with AMS combo)
Effortlessly switch between your AMS and external filament spools for maximum flexibility.
Flat Base Plate
The smooth, flat surface makes it simple to swipe out all residue, keeping your printer clean.
Integrated Lift Handles
Designed for safe and easy transport, these sturdy handles protect your hands and provide a secure grip when moving the printer.
Shatter-Safe Front Glass
Engineered for safety, the front glass is protected by a film built to resist shattering, protecting you and your workspace.
Unboxing Video
P2S Specs
| Item | Specification | |
| Printing Technology | Fused Deposition Modeling | |
| Body | Build Volume (W*D*H) |
256*256*256 mm³
|
| Chassis |
Plastic and Steel
|
|
|
Outer Frame
|
Plastic and Glass
|
|
| Physical Dimensions | Physical Dimensions |
392*406*478 mm³
|
| Net Weight |
14.9 kg
|
|
| Toolhead | Extruder Gear | Hardened Steel |
| Nozzle | Hardened Steel | |
| Max Nozzle Temperature | 300 °C | |
| Included Nozzle Diameter | 0.4 mm | |
| Supported Nozzle Diameter | 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm | |
|
Filament Cutter
|
Built-in
|
|
| Filament Diameter | 1.75 mm | |
| Extruder Motor | Bambu Lab High-precision Permanent Magnet Synchronous Motor | |
| Heatbed |
Build Plate Material
|
Flexible Steel Plate
|
|
Included Build Plate Type
|
Textured PEI Plate
|
|
| Supported Build Plate Type |
Textured PEI plate, Smooth PEI Plate, Cool Plate SuperTack
|
|
| Max Heatbed Temperature | 110 ℃ | |
| Speed | Max Speed of Toolhead | 600 mm/s |
| Max Acceleration of Toolhead | 20,000 mm/s² | |
|
Max Flow for Hotend
|
40 mm³/s
(Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 ℃ printing temperature)
|
|
|
Filtration
|
Activated Carbon Filter Type
|
Granulated Coconut Shell
|
|
VOC Filtration
|
Supported
|
|
|
Particulate Matter Filtration
|
Supported
|
|
| Cooling | Part Cooling Fan | Closed Loop Control |
| Cooling Fan for Hotend | Closed Loop Control | |
|
Auxiliary Part Cooling Fan
|
Closed Loop Control | |
|
Filament Supported
|
PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF
|
|
| Sensor | Camera |
Built-in; 1920*1080; 30 fps HD
|
| Door Sensor | Supported | |
| Filament Run Out Sensor | Supported | |
| Filament Tangle Sensor | Supported | |
| Filament Odometry | Supported with AMS | |
| Power Loss Recovery | Supported | |
| Electrical Requirements | Voltage | 100-120 VAC / 200-240 VAC, 50/60 Hz |
| Max Power* |
1200 W@220 V / 1000 W@110 V
|
|
|
PLA Steady-State Power
|
200 W@220 V / 200 W@110 V（PLA printing）
|
|
|
Working Temperature
|
|
10 °C–30 °C
|
| Electronics | Touchscreen |
5-inch 854*480 Touchscreen
|
| Storage | Built-in 8 GB EMMC and USB Port | |
| Control Interface | Touchscreen, mobile App, PC App | |
|
Motion Controller
|
Dual-core Cortex-M4 and Single-core Cortex-M7
|
|
|
Application Processor
|
Quad-core 1.5 GHz ARM A7
|
|
| Neural Processing Unit | 2 TOPS | |
| Software | Slicer |
Bambu Studio
Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
|
| Supported Operating System |
MacOS, Windows, Linux
|
|
|
Network Control
|
Ethernet
|
Not Available
|
|
Wireless Network
|
Dual-Band Wi-Fi
|
|
|
Network Kill Switch
|
Not Available
|
|
|
Removable Network Module
|
Not Available
|
|
|
802.1X Network Access Control
|
Not Available
|
|
| Wi-Fi | Operating Frequency |
2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE)
2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC)
|
| Wi-Fi Transmitter Power (EIRP) |
2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)
5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)
5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)
5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
|
|
| Wi-Fi Protocol | IEEE 802.11 a/b/g/n | |
- Choosing a selection results in a full page refresh.