{"id":7927610245350,"title":"E3D Revo™ Creality Assembly - 1.75mm 12V\/24V","handle":"copy-of-e3d-revo-micro-single-nozzle-hotend-kit-1-75mm-24v","description":"\u003cp\u003eUpgrade your Creality 3D printer to Revo so you can change nozzles cold without special tools and hot tightening hassles.\u003c\/p\u003e\n\u003cp\u003eNo extra mounts or adapters needed: Pre-drilled M3 clearance holes match Creality’s X carriage mounting pattern for easy installation.\u003c\/p\u003e\n\u003cp\u003eNo firmware tweaks: This kit includes a special Revo HeaterCore with a 100K NTC thermistor, which has the same response as the stock Creality thermistor.\u003c\/p\u003e\n\u003cp\u003eIncludes solderless, crimp-less, butt splice connectors for easy connection. Wire the HeaterCore into your Creality 3D printer without undoing your entire cable bundle\u003c\/p\u003e\n\u003cp\u003eDetailed [upgrade guides] created by us help you get 3D printing quickly\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCreality mounting holes.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConvenient M3 clearance holes correspond to Creality’s X carriage mounting pattern, so you can get up and running quickly without extra mounts or adaptors. Just reuse the existing M3 bolts!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy nozzle swaps.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA variety of Revo Nozzles enhance the capabilities of your 3D printer without a difficult nozzle changing processes. Every Revo Nozzle can be changed by hand. No tools, no hot tightening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple, hassle-free connection.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWe’ve included some solderless, crimpless, butt splice connectors for easy connection to help you get up and running quickly without having to undo your entire wiring bundle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter reliability.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRevo Nozzles are factory sealed, so there’s much less chance of nozzle leaks, and no hot tightening needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter efficiency.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe included Revo HeaterCore makes your 3D printer heat up faster and more efficiently than the stock HotEnd. Start 3D printing right away without annoying firmware adjustments: we’ve integrated a 100K NTC thermistor into this special HeaterCore. This thermistor has the same response as the stock HotEnd, so no firmware tweaks are needed. Better safety. Thanks to built-in PTC behaviour of the heaterCore, Revo CR will add an extra failsafe against thermal runaways to your Creality 3D printer – providing an extra layer of protection if thermal runaway protection is disabled in firmware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Revo CR compatible with my Creality printer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease see our compatibility\u003ca title=\"Revo CR compatibility list\" href=\"https:\/\/e3d-online.zendesk.com\/hc\/en-us\/articles\/5704294571549-Revo-CR-compatibility-list\" target=\"_blank\"\u003e \u003c\/a\u003eguide for the most up-to-date information.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- Revo CR can be used with other Creality printers using the NTC thermistor. However, you may need to modify the mount and or Z sensor.\u003c\/p\u003e\n\u003cp\u003e- You may need to adjust the Z height when changing nozzles.\u003c\/p\u003e\n\u003cp\u003e- Please check whether your specific printer runs 12V or 24V before purchasing and assembling.\u003c\/p\u003e\n\u003cp\u003eUpgrade your Creality 3D printer to Revo so you can change nozzles cold without special tools and hot tightening hassles.\u003c\/p\u003e\n\u003cp\u003eNo extra mounts or adapters needed: Pre-drilled M3 clearance holes match Creality’s X carriage mounting pattern for easy installation.\u003c\/p\u003e\n\u003cp\u003eNo firmware tweaks: This kit includes a special Revo HeaterCore with a 100K NTC thermistor, which has the same response as the stock Creality thermistor.\u003c\/p\u003e\n\u003cp\u003eIncludes solderless, crimp-less, butt splice connectors for easy connection. Wire the HeaterCore into your Creality 3D printer without undoing your entire cable bundle\u003c\/p\u003e\n\u003cp\u003eDetailed [upgrade guides] created by us help you get 3D printing quickly\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCreality mounting holes.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConvenient M3 clearance holes correspond to Creality’s X carriage mounting pattern, so you can get up and running quickly without extra mounts or adaptors. Just reuse the existing M3 bolts!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy nozzle swaps.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA variety of Revo Nozzles enhance the capabilities of your 3D printer without a difficult nozzle changing processes. Every Revo Nozzle can be changed by hand. No tools, no hot tightening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple, hassle-free connection.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWe’ve included some solderless, crimpless, butt splice connectors for easy connection to help you get up and running quickly without having to undo your entire wiring bundle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter reliability.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRevo Nozzles are factory sealed, so there’s much less chance of nozzle leaks, and no hot tightening needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter efficiency.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe included Revo HeaterCore makes your 3D printer heat up faster and more efficiently than the stock HotEnd. Start 3D printing right away without annoying firmware adjustments: we’ve integrated a 100K NTC thermistor into this special HeaterCore. This thermistor has the same response as the stock HotEnd, so no firmware tweaks are needed. Better safety. Thanks to built-in PTC behaviour of the heaterCore, Revo CR will add an extra failsafe against thermal runaways to your Creality 3D printer – providing an extra layer of protection if thermal runaway protection is disabled in firmware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Revo CR compatible with my Creality printer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease see our compatibility\u003ca title=\"E3D Revo CR compatibility list\" href=\"https:\/\/e3d-online.zendesk.com\/hc\/en-us\/articles\/5704294571549-Revo-CR-compatibility-list\" target=\"_blank\"\u003e \u003c\/a\u003eguide for the most up-to-date information.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- Revo CR can be used with other Creality printers using the NTC thermistor. However, you may need to modify the mount and or Z sensor.\u003c\/p\u003e\n\u003cp\u003e- You may need to adjust the Z height when changing nozzles.\u003c\/p\u003e\n\u003cp\u003e- Please check whether your specific printer runs 12V or 24V before purchasing and assembling.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMax temp: 300°C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNozzle: RapidChange Revo \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSolder and Crimping free wiring\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eTemperature sensor: Creality specific\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMounting type: Creality M3\u003cbr\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 x  Revo CR heatsink \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 x Collet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 x Collet clip \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 x Revo HeaterCore 12V or 24V\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 x Revo HeaterCore spring \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 x Extension cable kit \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4 x butt splice connector \u003c\/p\u003e\n\u003cp\u003eSingle nozzle kit:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e 1 x 0.40mm brass Revo Nozzle \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/e3d-online.zendesk.com\/hc\/en-us\/sections\/6157566251549-Revo-CR\"\u003eRevo CR documentation here\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2022-08-18T13:51:24-04:00","created_at":"2022-08-18T11:24:46-04:00","vendor":"E3D","type":"Parts","tags":["3D printer hotend","assembly","cr revo","Creality","e3D","e3d revo cr assembly","Hotend","hotend assembly","newfront","revo"],"price":12999,"price_min":12999,"price_max":12999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43238534938854,"title":"12V","option1":"12V","option2":null,"option3":null,"sku":"E3D-PT-REVO-CR-175-12V-AS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E3D Revo™ Creality Assembly - 1.75mm 12V\/24V - 12V","public_title":"12V","options":["12V"],"price":12999,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8000029712","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43238534971622,"title":"24V","option1":"24V","option2":null,"option3":null,"sku":"E3D-PT-REVO-CR-175-24V-AS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E3D Revo™ Creality Assembly - 1.75mm 12V\/24V - 24V","public_title":"24V","options":["24V"],"price":12999,"weight":1000,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8000028012","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CR-White2_600x600_22ce4894-75ee-41ae-a4ff-34f0a8288f03.png?v=1660837899","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CRWhite-4_600x600_7550f6a6-1fb1-40c9-90b8-207de3c05663.png?v=1660837914","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CRWhite3_600x600_58690574-0961-4a9b-a254-487df07b5f34.png?v=1660837921","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Creality-White1_600x600_51aee199-1c52-47fe-8bfc-81e7585b3ee1.png?v=1660837933","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/P1620579_600x600_98236de0-e919-4e24-bb65-4c3e4bb26e59.png?v=1660837941"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CR-White2_600x600_22ce4894-75ee-41ae-a4ff-34f0a8288f03.png?v=1660837899","options":["Voltage"],"media":[{"alt":null,"id":30753246904550,"position":1,"preview_image":{"aspect_ratio":1.5,"height":400,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CR-White2_600x600_22ce4894-75ee-41ae-a4ff-34f0a8288f03.png?v=1660837899"},"aspect_ratio":1.5,"height":400,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CR-White2_600x600_22ce4894-75ee-41ae-a4ff-34f0a8288f03.png?v=1660837899","width":600},{"alt":null,"id":30753247494374,"position":2,"preview_image":{"aspect_ratio":1.5,"height":400,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CRWhite-4_600x600_7550f6a6-1fb1-40c9-90b8-207de3c05663.png?v=1660837914"},"aspect_ratio":1.5,"height":400,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CRWhite-4_600x600_7550f6a6-1fb1-40c9-90b8-207de3c05663.png?v=1660837914","width":600},{"alt":null,"id":30753247822054,"position":3,"preview_image":{"aspect_ratio":1.5,"height":400,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CRWhite3_600x600_58690574-0961-4a9b-a254-487df07b5f34.png?v=1660837921"},"aspect_ratio":1.5,"height":400,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CRWhite3_600x600_58690574-0961-4a9b-a254-487df07b5f34.png?v=1660837921","width":600},{"alt":null,"id":30753248411878,"position":4,"preview_image":{"aspect_ratio":1.5,"height":400,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Creality-White1_600x600_51aee199-1c52-47fe-8bfc-81e7585b3ee1.png?v=1660837933"},"aspect_ratio":1.5,"height":400,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Creality-White1_600x600_51aee199-1c52-47fe-8bfc-81e7585b3ee1.png?v=1660837933","width":600},{"alt":null,"id":30753248968934,"position":5,"preview_image":{"aspect_ratio":1.33,"height":451,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/P1620579_600x600_98236de0-e919-4e24-bb65-4c3e4bb26e59.png?v=1660837941"},"aspect_ratio":1.33,"height":451,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/P1620579_600x600_98236de0-e919-4e24-bb65-4c3e4bb26e59.png?v=1660837941","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eUpgrade your Creality 3D printer to Revo so you can change nozzles cold without special tools and hot tightening hassles.\u003c\/p\u003e\n\u003cp\u003eNo extra mounts or adapters needed: Pre-drilled M3 clearance holes match Creality’s X carriage mounting pattern for easy installation.\u003c\/p\u003e\n\u003cp\u003eNo firmware tweaks: This kit includes a special Revo HeaterCore with a 100K NTC thermistor, which has the same response as the stock Creality thermistor.\u003c\/p\u003e\n\u003cp\u003eIncludes solderless, crimp-less, butt splice connectors for easy connection. Wire the HeaterCore into your Creality 3D printer without undoing your entire cable bundle\u003c\/p\u003e\n\u003cp\u003eDetailed [upgrade guides] created by us help you get 3D printing quickly\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCreality mounting holes.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConvenient M3 clearance holes correspond to Creality’s X carriage mounting pattern, so you can get up and running quickly without extra mounts or adaptors. Just reuse the existing M3 bolts!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy nozzle swaps.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA variety of Revo Nozzles enhance the capabilities of your 3D printer without a difficult nozzle changing processes. Every Revo Nozzle can be changed by hand. No tools, no hot tightening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple, hassle-free connection.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWe’ve included some solderless, crimpless, butt splice connectors for easy connection to help you get up and running quickly without having to undo your entire wiring bundle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter reliability.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRevo Nozzles are factory sealed, so there’s much less chance of nozzle leaks, and no hot tightening needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter efficiency.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe included Revo HeaterCore makes your 3D printer heat up faster and more efficiently than the stock HotEnd. Start 3D printing right away without annoying firmware adjustments: we’ve integrated a 100K NTC thermistor into this special HeaterCore. This thermistor has the same response as the stock HotEnd, so no firmware tweaks are needed. Better safety. Thanks to built-in PTC behaviour of the heaterCore, Revo CR will add an extra failsafe against thermal runaways to your Creality 3D printer – providing an extra layer of protection if thermal runaway protection is disabled in firmware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Revo CR compatible with my Creality printer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease see our compatibility\u003ca title=\"Revo CR compatibility list\" href=\"https:\/\/e3d-online.zendesk.com\/hc\/en-us\/articles\/5704294571549-Revo-CR-compatibility-list\" target=\"_blank\"\u003e \u003c\/a\u003eguide for the most up-to-date information.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- Revo CR can be used with other Creality printers using the NTC thermistor. However, you may need to modify the mount and or Z sensor.\u003c\/p\u003e\n\u003cp\u003e- You may need to adjust the Z height when changing nozzles.\u003c\/p\u003e\n\u003cp\u003e- Please check whether your specific printer runs 12V or 24V before purchasing and assembling.\u003c\/p\u003e\n\u003cp\u003eUpgrade your Creality 3D printer to Revo so you can change nozzles cold without special tools and hot tightening hassles.\u003c\/p\u003e\n\u003cp\u003eNo extra mounts or adapters needed: Pre-drilled M3 clearance holes match Creality’s X carriage mounting pattern for easy installation.\u003c\/p\u003e\n\u003cp\u003eNo firmware tweaks: This kit includes a special Revo HeaterCore with a 100K NTC thermistor, which has the same response as the stock Creality thermistor.\u003c\/p\u003e\n\u003cp\u003eIncludes solderless, crimp-less, butt splice connectors for easy connection. Wire the HeaterCore into your Creality 3D printer without undoing your entire cable bundle\u003c\/p\u003e\n\u003cp\u003eDetailed [upgrade guides] created by us help you get 3D printing quickly\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCreality mounting holes.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConvenient M3 clearance holes correspond to Creality’s X carriage mounting pattern, so you can get up and running quickly without extra mounts or adaptors. Just reuse the existing M3 bolts!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy nozzle swaps.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA variety of Revo Nozzles enhance the capabilities of your 3D printer without a difficult nozzle changing processes. Every Revo Nozzle can be changed by hand. No tools, no hot tightening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple, hassle-free connection.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWe’ve included some solderless, crimpless, butt splice connectors for easy connection to help you get up and running quickly without having to undo your entire wiring bundle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter reliability.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRevo Nozzles are factory sealed, so there’s much less chance of nozzle leaks, and no hot tightening needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter efficiency.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe included Revo HeaterCore makes your 3D printer heat up faster and more efficiently than the stock HotEnd. Start 3D printing right away without annoying firmware adjustments: we’ve integrated a 100K NTC thermistor into this special HeaterCore. This thermistor has the same response as the stock HotEnd, so no firmware tweaks are needed. Better safety. Thanks to built-in PTC behaviour of the heaterCore, Revo CR will add an extra failsafe against thermal runaways to your Creality 3D printer – providing an extra layer of protection if thermal runaway protection is disabled in firmware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Revo CR compatible with my Creality printer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease see our compatibility\u003ca title=\"E3D Revo CR compatibility list\" href=\"https:\/\/e3d-online.zendesk.com\/hc\/en-us\/articles\/5704294571549-Revo-CR-compatibility-list\" target=\"_blank\"\u003e \u003c\/a\u003eguide for the most up-to-date information.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- Revo CR can be used with other Creality printers using the NTC thermistor. However, you may need to modify the mount and or Z sensor.\u003c\/p\u003e\n\u003cp\u003e- You may need to adjust the Z height when changing nozzles.\u003c\/p\u003e\n\u003cp\u003e- Please check whether your specific printer runs 12V or 24V before purchasing and assembling.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMax temp: 300°C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNozzle: RapidChange Revo \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSolder and Crimping free wiring\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eTemperature sensor: Creality specific\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMounting type: Creality M3\u003cbr\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 x  Revo CR heatsink \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 x Collet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 x Collet clip \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 x Revo HeaterCore 12V or 24V\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 x Revo HeaterCore spring \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 x Extension cable kit \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4 x butt splice connector \u003c\/p\u003e\n\u003cp\u003eSingle nozzle kit:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e 1 x 0.40mm brass Revo Nozzle \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/e3d-online.zendesk.com\/hc\/en-us\/sections\/6157566251549-Revo-CR\"\u003eRevo CR documentation here\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}

E3D Revo™ Creality Assembly - 1.75mm 12V/24V

Product Description
$129.99 CAD
Maximum quantity available reached.

Upgrade your Creality 3D printer to Revo so you can change nozzles cold without special tools and hot tightening hassles.

No extra mounts or adapters needed: Pre-drilled M3 clearance holes match Creality’s X carriage mounting pattern for easy installation.

No firmware tweaks: This kit includes a special Revo HeaterCore with a 100K NTC thermistor, which has the same response as the stock Creality thermistor.

Includes solderless, crimp-less, butt splice connectors for easy connection. Wire the HeaterCore into your Creality 3D printer without undoing your entire cable bundle

Detailed [upgrade guides] created by us help you get 3D printing quickly

Creality mounting holes. Convenient M3 clearance holes correspond to Creality’s X carriage mounting pattern, so you can get up and running quickly without extra mounts or adaptors. Just reuse the existing M3 bolts!

Easy nozzle swaps. A variety of Revo Nozzles enhance the capabilities of your 3D printer without a difficult nozzle changing processes. Every Revo Nozzle can be changed by hand. No tools, no hot tightening.

Simple, hassle-free connection. We’ve included some solderless, crimpless, butt splice connectors for easy connection to help you get up and running quickly without having to undo your entire wiring bundle.

Better reliability. Revo Nozzles are factory sealed, so there’s much less chance of nozzle leaks, and no hot tightening needed.

Better efficiency. The included Revo HeaterCore makes your 3D printer heat up faster and more efficiently than the stock HotEnd. Start 3D printing right away without annoying firmware adjustments: we’ve integrated a 100K NTC thermistor into this special HeaterCore. This thermistor has the same response as the stock HotEnd, so no firmware tweaks are needed. Better safety. Thanks to built-in PTC behaviour of the heaterCore, Revo CR will add an extra failsafe against thermal runaways to your Creality 3D printer – providing an extra layer of protection if thermal runaway protection is disabled in firmware.

Is Revo CR compatible with my Creality printer?

Please see our compatibility guide for the most up-to-date information.

 

Please note:

- Revo CR can be used with other Creality printers using the NTC thermistor. However, you may need to modify the mount and or Z sensor.

- You may need to adjust the Z height when changing nozzles.

- Please check whether your specific printer runs 12V or 24V before purchasing and assembling.

Upgrade your Creality 3D printer to Revo so you can change nozzles cold without special tools and hot tightening hassles.

No extra mounts or adapters needed: Pre-drilled M3 clearance holes match Creality’s X carriage mounting pattern for easy installation.

No firmware tweaks: This kit includes a special Revo HeaterCore with a 100K NTC thermistor, which has the same response as the stock Creality thermistor.

Includes solderless, crimp-less, butt splice connectors for easy connection. Wire the HeaterCore into your Creality 3D printer without undoing your entire cable bundle

Detailed [upgrade guides] created by us help you get 3D printing quickly

Creality mounting holes. Convenient M3 clearance holes correspond to Creality’s X carriage mounting pattern, so you can get up and running quickly without extra mounts or adaptors. Just reuse the existing M3 bolts!

Easy nozzle swaps. A variety of Revo Nozzles enhance the capabilities of your 3D printer without a difficult nozzle changing processes. Every Revo Nozzle can be changed by hand. No tools, no hot tightening.

Simple, hassle-free connection. We’ve included some solderless, crimpless, butt splice connectors for easy connection to help you get up and running quickly without having to undo your entire wiring bundle.

Better reliability. Revo Nozzles are factory sealed, so there’s much less chance of nozzle leaks, and no hot tightening needed.

Better efficiency. The included Revo HeaterCore makes your 3D printer heat up faster and more efficiently than the stock HotEnd. Start 3D printing right away without annoying firmware adjustments: we’ve integrated a 100K NTC thermistor into this special HeaterCore. This thermistor has the same response as the stock HotEnd, so no firmware tweaks are needed. Better safety. Thanks to built-in PTC behaviour of the heaterCore, Revo CR will add an extra failsafe against thermal runaways to your Creality 3D printer – providing an extra layer of protection if thermal runaway protection is disabled in firmware.

Is Revo CR compatible with my Creality printer?

Please see our compatibility guide for the most up-to-date information.

 

Please note:

- Revo CR can be used with other Creality printers using the NTC thermistor. However, you may need to modify the mount and or Z sensor.

- You may need to adjust the Z height when changing nozzles.

- Please check whether your specific printer runs 12V or 24V before purchasing and assembling.

 

Key features:

- Max temp: 300°C

- Nozzle: RapidChange Revo 

- Solder and Crimping free wiring

- Temperature sensor: Creality specific

- Mounting type: Creality M3

 

Kit includes:

- 1 x  Revo CR heatsink 

- 1 x Collet

- 1 x Collet clip 

- 1 x Revo HeaterCore 12V or 24V

- 1 x Revo HeaterCore spring 

- 1 x Extension cable kit 

- 4 x butt splice connector 

Single nozzle kit:

- 1 x 0.40mm brass Revo Nozzle 

 

Revo CR documentation here

      Price Match

       Contact us here!

      We match all competitors pricing!

      You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you're getting honest value for your money.

      Price match for retail store

      We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor's store or website (including shipping, handling and fees, if applicable within Canada)

      Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.

      Price match for online only website

      If you find an identical item for less at a Canadian online only website, we will match their price (including shipping, handling and fees, if applicable).

      How to price match in-store:

      When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor's website.

      How to price match on DigitMakers.ca

      Please Email : Sales@digitmakers.ca

      Please make sure you have the following information before contacting us so that we can assist you as quickly as possible:

      • Your full name and phone number
      • The complete URL (web address) of product page on the competitor's website (Canada Only Accepted) 
      • Details of the product name, brand and model
      • Details of the price difference (including shipping, handling and other fees, if applicable)

       

      Our goal is to provide everyday low prices on all of our Items 

      Sku: E3D-PT-REVO-CR-175-12V-AS
      Vendor: E3D
      Get a free quotation for the product of your interest today. Choose from a wide range of 3D Printers , 3D Scanners, 3D Printing Filaments , 3D Resin & 3D Printing parts today ! Contact us today !

      Price Match

       Contact us here!

      We match all competitors pricing!

      You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you're getting honest value for your money.

      Price match for retail store

      We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor's store or website (including shipping, handling and fees, if applicable within Canada)

      Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.

      Price match for online only website

      If you find an identical item for less at a Canadian online only website, we will match their price (including shipping, handling and fees, if applicable).

      How to price match in-store:

      When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor's website.

      How to price match on DigitMakers.ca

      Please Email : Sales@digitmakers.ca

      Please make sure you have the following information before contacting us so that we can assist you as quickly as possible:

      • Your full name and phone number
      • The complete URL (web address) of product page on the competitor's website (Canada Only Accepted) 
      • Details of the product name, brand and model
      • Details of the price difference (including shipping, handling and other fees, if applicable)

       

      Our goal is to provide everyday low prices on all of our Items 

      Related Products