Your cart is empty
Looks like you haven't added anything to your cart yet
ESUN PW100 PLA Water Washable Resin 0.5kg - various colors
|
Beige | ||
|
Black | ||
|
Grey | ||
|
White |
Combining the advantages of eSUN’s own PLA polyol, a bio based water washable resin for ordinary consumers contains bio based components, is compatible with color screens, black and white screens, large and small size printers.
Description
PW100 PLA Water Washable Resin has good toughness, low odor, and a smooth printed surface. It can be washed with water, eliminating alcohol cleaning steps, greatly reducing post-processing time, improving printing efficiency and cost-effective.
Sellingpoint
Low odor
Washable
Wide Compatibility
Low Viscosity
High-precision
Balance of strength, toughness and rigidity.
Application
- Education
- Ornament
Parameter Information
| 3D PRINTING PHOTOPOLYMER RESIN Properties Table | |
|---|---|
| 3D PRINTING PHOTOPOLYMER RESIN | PW100 PLA Water Washable Resin |
| Viscosity(mPa·s) | 255-270 |
| Density(g/cm3) | 1.09-1.10 |
| Tensile Strength(MPa) | 45-55 |
| Elongation at Break(%) | 17-30 |
| Flexural Strength(MPa) | 45-55 |
| Impact Strength(J/m) | 950-1050 |
| Tearing Strength(GPa) | / |
| Heat Distortion Temp(℃) | / |
| Hardness(Shore D) | 81 |
| Grades (out of 10) | |
| Strength（S） | 8 |
| Toughness（F） | 8 |
| Forming（P） | 8 |
| Accuracy（S） | 9 |
|
Speed （A） |
7 |
Notes
1. Shake well before printing
2. It is not suitable to wash the resin with water for a long time. It can be cleaned for tens of seconds to one minute. After cleaning, it is better to dry it with a hair dryer in time. When storing, it should not be placed in a humid and high temperature environment
3. The waste water after cleaning should not be discharged directly. It is better to put it in a container under the sun so that the dissolved resin can be completely solidified before discharging.
Print Models
Recommended for You
Browsing history
- Choosing a selection results in a full page refresh.