Flashforge Creator 3 Firmware Update

Flashforge Creator 3 Firmware Update

This is a quick guide for updating the Flashforge Creator 3

With every new printer on the market, companies rush to procure a new model for the market. Many times they can't get all the bugs fixed, and so they release firmware updates to improve performance and reliability of their products. Some updates are small improvements for USB flash storage or optimizing Wifi connections. Firmware updates also allow old hardware to possibly run new features such as cloud printing and monitoring.

Follow the instructions to update your Creator 3.

  1. Download the firmware file to the USB-drive and unzip to root directory.(You can format the USB-drive to FAT32 first). Confirm all the files in the root directory of USB-drive.
    Download the file from this Google Drive link: https://drive.google.com/open?id=1vSLUo-L6GkAvpPCUYOZ8MkSrCBvWTOHy
  2. Insert the USB drive, and then power on the printer.
  3. There should be three beep sounds,and then it will show the firmware updated is finished.
  4. Wait for around 10 seconds,then power off the printer. Remove the USB-drive, then power on again to check through the menu.
  5. Format USB drive to avoid updating erroneous printers.

Once you're done, your printer is ready for new features! Happy printing!

Previous Post Next Post

  • service Department
Comments 1
  • Adolph Smith
    Adolph Smith

    Hi please help. After update my printer not homing anymore. It keeps on bumping the two heads on the sides off my x access . I do not know how to fix this issue. The creator 3 do not have a limit stop at x so how do i fix this. I tried everything. No success . Please help.

Leave a comment
Your Name:*
Email Address:*
Message: *
* Required Fields