{"id":4701190586499,"title":"3DXMAX GF-10 ABS Filament - Black various sizes","handle":"3dxmax-gf10-abs-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003e3DXMAX® ABS-GF10 Glass Fiber Reinforced ABS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur glass fiber reinforced ABS is very stiff and strong allowing you to create structural parts without the lifting and warping that can happen with unfilled ABS.  We use premium ABS and a special glass fiber chosen to be compatible with ABS and the FDM\/FFF process.  Glass fiber is very abrasive and we strongly recommend using our A2 Hardened Steel Nozzles when printing with glass fiber reinforced materials.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePrint industrial-grade ABS parts with Gearbox™ HT2 High-Temp 3D Printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Attributes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for structural engineering-grade applications\u003c\/li\u003e\n\u003cli\u003eExceptionally stiff and strong - without being brittle\u003c\/li\u003e\n\u003cli\u003eExcellent dimensional stability\u003c\/li\u003e\n\u003cli\u003eVery low shrinkage, warp, and lifting\u003c\/li\u003e\n\u003cli\u003eHigh thermal properties - up to 95\u003cspan\u003e°C\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ein-use applications depending on the mechanical loads applied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eExtruder:\u003c\/span\u003e  230-245°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eBed Temp:\u003c\/span\u003e  95-110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eBed Prep: \u003c\/span\u003e PI Tape, PEI Tape, or ABS\/Acetone Slurry on clean glass works great for us.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHardened Nozzle:\u003c\/span\u003e 0.4mm or larger.  Glass fiber is very abrasive and will quickly wear out a brass nozzle.  We strongly recommend using our A2 Hardened Steel Nozzles \u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLayer Height:\u003c\/span\u003e  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with glass fiber grades.  L\u003cspan\u003eower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-03-26T17:33:48-04:00","created_at":"2020-03-26T17:33:48-04:00","vendor":"3DXMAX","type":"Filaments","tags":["1.75","1.75 mm","1.75mm","2.85","2.85 mm","2.85mm","3dxtech","3mm","750g","abs gf","abs gf-10","black","gf-10","gf10","Special ABS 1.75 mm","Special ABS 3 mm \/ 2.85 mm"],"price":6495,"price_min":6495,"price_max":6495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32859344470147,"title":"1.75mm \/ Black","option1":"1.75mm","option2":"Black","option3":null,"sku":"3DXMAX-FL-ABS-GF-1.75-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14963483082883,"product_id":4701190586499,"position":1,"created_at":"2020-03-26T17:36:18-04:00","updated_at":"2020-07-11T07:49:27-04:00","alt":"3DXMAX GF-10 ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/GF-ABS_Title__84498.1564418399.jpg?v=1594468167","variant_ids":[32859344470147,32859344502915]},"available":true,"name":"3DXMAX GF-10 ABS Filament - Black various sizes - 1.75mm \/ Black","public_title":"1.75mm \/ Black","options":["1.75mm","Black"],"price":6495,"weight":2000,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"3DXMAX GF-10 ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7133370450051,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/GF-ABS_Title__84498.1564418399.jpg?v=1585258578"}}},{"id":32859344502915,"title":"2.85mm \/ Black","option1":"2.85mm","option2":"Black","option3":null,"sku":"3DXMAX-FL-ABS-GF-2.85-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14963483082883,"product_id":4701190586499,"position":1,"created_at":"2020-03-26T17:36:18-04:00","updated_at":"2020-07-11T07:49:27-04:00","alt":"3DXMAX GF-10 ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/GF-ABS_Title__84498.1564418399.jpg?v=1594468167","variant_ids":[32859344470147,32859344502915]},"available":true,"name":"3DXMAX GF-10 ABS Filament - Black various sizes - 2.85mm \/ Black","public_title":"2.85mm \/ Black","options":["2.85mm","Black"],"price":6495,"weight":2000,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"3DXMAX GF-10 ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7133370450051,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/GF-ABS_Title__84498.1564418399.jpg?v=1585258578"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/GF-ABS_Title__84498.1564418399.jpg?v=1594468167"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/GF-ABS_Title__84498.1564418399.jpg?v=1594468167","options":["Size","Color"],"media":[{"alt":"3DXMAX GF-10 ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7133370450051,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/GF-ABS_Title__84498.1564418399.jpg?v=1585258578"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/GF-ABS_Title__84498.1564418399.jpg?v=1585258578","width":1269}],"content":"\u003cp\u003e\u003cstrong\u003e3DXMAX® ABS-GF10 Glass Fiber Reinforced ABS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur glass fiber reinforced ABS is very stiff and strong allowing you to create structural parts without the lifting and warping that can happen with unfilled ABS.  We use premium ABS and a special glass fiber chosen to be compatible with ABS and the FDM\/FFF process.  Glass fiber is very abrasive and we strongly recommend using our A2 Hardened Steel Nozzles when printing with glass fiber reinforced materials.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePrint industrial-grade ABS parts with Gearbox™ HT2 High-Temp 3D Printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Attributes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for structural engineering-grade applications\u003c\/li\u003e\n\u003cli\u003eExceptionally stiff and strong - without being brittle\u003c\/li\u003e\n\u003cli\u003eExcellent dimensional stability\u003c\/li\u003e\n\u003cli\u003eVery low shrinkage, warp, and lifting\u003c\/li\u003e\n\u003cli\u003eHigh thermal properties - up to 95\u003cspan\u003e°C\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ein-use applications depending on the mechanical loads applied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eExtruder:\u003c\/span\u003e  230-245°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eBed Temp:\u003c\/span\u003e  95-110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eBed Prep: \u003c\/span\u003e PI Tape, PEI Tape, or ABS\/Acetone Slurry on clean glass works great for us.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHardened Nozzle:\u003c\/span\u003e 0.4mm or larger.  Glass fiber is very abrasive and will quickly wear out a brass nozzle.  We strongly recommend using our A2 Hardened Steel Nozzles \u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLayer Height:\u003c\/span\u003e  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with glass fiber grades.  L\u003cspan\u003eower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e"}

3DXMAX GF-10 ABS Filament - Black various sizes

Product Description
$64.95 CAD
Maximum quantity available reached.

3DXMAX® ABS-GF10 Glass Fiber Reinforced ABS

Our glass fiber reinforced ABS is very stiff and strong allowing you to create structural parts without the lifting and warping that can happen with unfilled ABS.  We use premium ABS and a special glass fiber chosen to be compatible with ABS and the FDM/FFF process.  Glass fiber is very abrasive and we strongly recommend using our A2 Hardened Steel Nozzles when printing with glass fiber reinforced materials.

Print industrial-grade ABS parts with Gearbox™ HT2 High-Temp 3D Printer.

Product Attributes

  • Ideal for structural engineering-grade applications
  • Exceptionally stiff and strong - without being brittle
  • Excellent dimensional stability
  • Very low shrinkage, warp, and lifting
  • High thermal properties - up to 95°C in-use applications depending on the mechanical loads applied

Recommended Print Conditions:

  • Extruder:  230-245°C
  • Bed Temp:  95-110°C
  • Bed Prep:  PI Tape, PEI Tape, or ABS/Acetone Slurry on clean glass works great for us.
  • Hardened Nozzle: 0.4mm or larger.  Glass fiber is very abrasive and will quickly wear out a brass nozzle.  We strongly recommend using our A2 Hardened Steel Nozzles 
  • Layer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with glass fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.
Sku: 3DXMAX-FL-ABS-GF-1.75-750g-BLK
Vendor: 3DXMAX
Get a free quotation for the product of your interest today. Choose from a wide range of 3D Printers , 3D Scanners, 3D Printing Filaments , 3D Resin & 3D Printing parts today ! Contact us today !

Price Match

 Contact us here!

We match all competitors pricing!

You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you're getting honest value for your money.

Price match for retail store

We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor's store or website (including shipping, handling and fees, if applicable within Canada)

Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.

Price match for online only website

If you find an identical item for less at a Canadian online only website, we will match their price (including shipping, handling and fees, if applicable).

How to price match in-store:

When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor's website.

How to price match on DigitMakers.ca

Please Email : Sales@digitmakers.ca

Please make sure you have the following information before contacting us so that we can assist you as quickly as possible:

  • Your full name and phone number
  • The complete URL (web address) of product page on the competitor's website (Canada Only Accepted) 
  • Details of the product name, brand and model
  • Details of the price difference (including shipping, handling and other fees, if applicable)

 

Our goal is to provide everyday low prices on all of our Items 

Related Products