3DXTECH

Sort by:
{"id":4701190586499,"title":"3DXMAX GF-10 ABS Filament - Black various sizes","handle":"3dxmax-gf10-abs-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003e3DXMAX® ABS-GF10 Glass Fiber Reinforced ABS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur glass fiber reinforced ABS is very stiff and strong allowing you to create structural parts without the lifting and warping that can happen with unfilled ABS.  We use premium ABS and a special glass fiber chosen to be compatible with ABS and the FDM\/FFF process.  Glass fiber is very abrasive and we strongly recommend using our A2 Hardened Steel Nozzles when printing with glass fiber reinforced materials.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePrint industrial-grade ABS parts with Gearbox™ HT2 High-Temp 3D Printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Attributes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for structural engineering-grade applications\u003c\/li\u003e\n\u003cli\u003eExceptionally stiff and strong - without being brittle\u003c\/li\u003e\n\u003cli\u003eExcellent dimensional stability\u003c\/li\u003e\n\u003cli\u003eVery low shrinkage, warp, and lifting\u003c\/li\u003e\n\u003cli\u003eHigh thermal properties - up to 95\u003cspan\u003e°C\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ein-use applications depending on the mechanical loads applied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eExtruder:\u003c\/span\u003e  230-245°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eBed Temp:\u003c\/span\u003e  95-110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eBed Prep: \u003c\/span\u003e PI Tape, PEI Tape, or ABS\/Acetone Slurry on clean glass works great for us.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHardened Nozzle:\u003c\/span\u003e 0.4mm or larger.  Glass fiber is very abrasive and will quickly wear out a brass nozzle.  We strongly recommend using our A2 Hardened Steel Nozzles \u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLayer Height:\u003c\/span\u003e  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with glass fiber grades.  L\u003cspan\u003eower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-03-26T17:33:48-04:00","created_at":"2020-03-26T17:33:48-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxtech","3mm","750g","abs gf","abs gf-10","black","gf-10","gf10","Special ABS 1.75mm","Special ABS 3mm \/ 2.85mm"],"price":6495,"price_min":6495,"price_max":6495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32859344470147,"title":"1.75mm \/ Black","option1":"1.75mm","option2":"Black","option3":null,"sku":"3DXMAX-FL-ABS-GF-1.75-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14963483082883,"product_id":4701190586499,"position":1,"created_at":"2020-03-26T17:36:18-04:00","updated_at":"2020-07-11T07:49:27-04:00","alt":"3DXMAX GF-10 ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/GF-ABS_Title__84498.1564418399.jpg?v=1594468167","variant_ids":[32859344470147,32859344502915]},"available":false,"name":"3DXMAX GF-10 ABS Filament - Black various sizes - 1.75mm \/ Black","public_title":"1.75mm \/ Black","options":["1.75mm","Black"],"price":6495,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"44470147","featured_media":{"alt":"3DXMAX GF-10 ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7133370450051,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/GF-ABS_Title__84498.1564418399.jpg?v=1594468167"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32859344502915,"title":"2.85mm \/ Black","option1":"2.85mm","option2":"Black","option3":null,"sku":"3DXMAX-FL-ABS-GF-2.85-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14963483082883,"product_id":4701190586499,"position":1,"created_at":"2020-03-26T17:36:18-04:00","updated_at":"2020-07-11T07:49:27-04:00","alt":"3DXMAX GF-10 ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/GF-ABS_Title__84498.1564418399.jpg?v=1594468167","variant_ids":[32859344470147,32859344502915]},"available":true,"name":"3DXMAX GF-10 ABS Filament - Black various sizes - 2.85mm \/ Black","public_title":"2.85mm \/ Black","options":["2.85mm","Black"],"price":6495,"weight":1500,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"44502915","featured_media":{"alt":"3DXMAX GF-10 ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7133370450051,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/GF-ABS_Title__84498.1564418399.jpg?v=1594468167"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/GF-ABS_Title__84498.1564418399.jpg?v=1594468167"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/GF-ABS_Title__84498.1564418399.jpg?v=1594468167","options":["Size","Color"],"media":[{"alt":"3DXMAX GF-10 ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7133370450051,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/GF-ABS_Title__84498.1564418399.jpg?v=1594468167"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/GF-ABS_Title__84498.1564418399.jpg?v=1594468167","width":1269}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e3DXMAX® ABS-GF10 Glass Fiber Reinforced ABS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur glass fiber reinforced ABS is very stiff and strong allowing you to create structural parts without the lifting and warping that can happen with unfilled ABS.  We use premium ABS and a special glass fiber chosen to be compatible with ABS and the FDM\/FFF process.  Glass fiber is very abrasive and we strongly recommend using our A2 Hardened Steel Nozzles when printing with glass fiber reinforced materials.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePrint industrial-grade ABS parts with Gearbox™ HT2 High-Temp 3D Printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Attributes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for structural engineering-grade applications\u003c\/li\u003e\n\u003cli\u003eExceptionally stiff and strong - without being brittle\u003c\/li\u003e\n\u003cli\u003eExcellent dimensional stability\u003c\/li\u003e\n\u003cli\u003eVery low shrinkage, warp, and lifting\u003c\/li\u003e\n\u003cli\u003eHigh thermal properties - up to 95\u003cspan\u003e°C\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ein-use applications depending on the mechanical loads applied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eExtruder:\u003c\/span\u003e  230-245°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eBed Temp:\u003c\/span\u003e  95-110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eBed Prep: \u003c\/span\u003e PI Tape, PEI Tape, or ABS\/Acetone Slurry on clean glass works great for us.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHardened Nozzle:\u003c\/span\u003e 0.4mm or larger.  Glass fiber is very abrasive and will quickly wear out a brass nozzle.  We strongly recommend using our A2 Hardened Steel Nozzles \u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLayer Height:\u003c\/span\u003e  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with glass fiber grades.  L\u003cspan\u003eower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e"}
3DXMAX GF-10 ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

3DXMAX GF-10 ABS Filament - Black various sizes

$64.95 CAD

3DXMAX® ABS-GF10 Glass Fiber Reinforced ABS Our glass fiber reinforced ABS is very stiff and strong allowing you to create structural parts without the lifting and warping that can happen with unfilled ABS.  We use premium ABS and a special glass fiber chosen to be compatible with ABS and the FDM/FFF process.  Glass fiber is very abrasive and we...

Size
Color
Black

More Info
{"id":4700981362819,"title":"3DXSTAT ESD ABS Filament - Black various sizes","handle":"3dxstat-esd-abs-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003e3DXSTAT™ ESD-SAFE ABS 3D Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTarget surface resistance: 10^7 to 10^9 Ohm.  Compare to Stratasys® ABS-ESD7 in performance and price and you'll never go back!  M\u003cspan\u003eade using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint industrial-grade ESD-ABS parts with Gearbox™ HT2 High-Temp 3D Printer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3DXSTAT™ ESD ABS is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection and a high level of cleanliness.  Manufactured with consistency in mind - 3DXTech starts with premium ABS and then compounded according to a proprietary formulation of multi-wall carbon nanotubes - giving you a filament with excellent printing characteristics and consistent ESD properties.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBenefits of 3DXSTAT™ include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConsistent and reliable surface resistance\u003c\/li\u003e\n\u003cli\u003eImproved retention of impact \u0026amp; elongation vs. similiar ESD-safe materials\u003c\/li\u003e\n\u003cli\u003eLow particulate contamination\u003c\/li\u003e\n\u003cli\u003eMinimal contribution to outgassing and ionic contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTypical applications include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-con:  HDD Components, Wafer Handling, Jigs, Casings, \u0026amp; Connectors \u003c\/li\u003e\n\u003cli\u003eIndustrial:  Conveying, Metering, and Sensing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTarget conductivity for 3DXSTAT™ ESD ABS:  \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10^7 to 10^9 Ohm surface resistivity on 3DP sample using concentric ring method.\u003c\/li\u003e\n\u003cli\u003eNote:  Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity.  Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry.  Therefore, expect some trial time to understand how this filament works in your specific printer \/ application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eSurface conductivity as a function of extruder temperature:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"esd-abs-resistance.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-4b4qda9b\/product_images\/uploaded_images\/esd-abs-resistance.png\" alt=\"esd-abs-resistance.png\" width=\"400\" height=\"279\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe surface resistance of the printed ESD-safe part will vary depending on the printer's extruder temperature.  For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity.  Therefore, the surface resistance can be 'dialed-in' by adjusting the extruder temperature up or down depending on the reading you receive on your part.  \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003eRecommended Print Conditions:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  220 - 240°C (desktop printers).  3DXSTAT™ ESD ABS is a filled product and has a higher melt viscosity vs. unfilled ABS.  Therefore, it is sometimes necessary to print at higher temperatures to allow the resin to flow properly.  \u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed Temp:  100-110°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  Kapton Polyimide Tape, ABS\/Acetone Slurry \u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-03-26T17:10:18-04:00","created_at":"2020-03-26T17:10:18-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxtech","3mm","750g","abs esd","black","ESD","esd abs","Special ABS 1.75mm","Special ABS 3mm \/ 2.85mm"],"price":15400,"price_min":15400,"price_max":15400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32858923958403,"title":"1.75mm \/ Black","option1":"1.75mm","option2":"Black","option3":null,"sku":"3DSTAT-FL-ABS-ESD-1.75-1kg-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14963227263107,"product_id":4700981362819,"position":1,"created_at":"2020-03-26T17:12:42-04:00","updated_at":"2020-07-11T07:49:25-04:00","alt":"3DXSTAT ESD ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-ABS_175_1kg__21010.1551980904.jpg?v=1594468165","variant_ids":[32858923958403,32858923991171]},"available":true,"name":"3DXSTAT ESD ABS Filament - Black various sizes - 1.75mm \/ Black","public_title":"1.75mm \/ Black","options":["1.75mm","Black"],"price":15400,"weight":1500,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"23958403","featured_media":{"alt":"3DXSTAT ESD ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7133114433667,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-ABS_175_1kg__21010.1551980904.jpg?v=1594468165"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32858923991171,"title":"2.85mm \/ Black","option1":"2.85mm","option2":"Black","option3":null,"sku":"3DSTAT-FL-ABS-ESD-2.85-1kg-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14963227263107,"product_id":4700981362819,"position":1,"created_at":"2020-03-26T17:12:42-04:00","updated_at":"2020-07-11T07:49:25-04:00","alt":"3DXSTAT ESD ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-ABS_175_1kg__21010.1551980904.jpg?v=1594468165","variant_ids":[32858923958403,32858923991171]},"available":true,"name":"3DXSTAT ESD ABS Filament - Black various sizes - 2.85mm \/ Black","public_title":"2.85mm \/ Black","options":["2.85mm","Black"],"price":15400,"weight":1500,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"23991171","featured_media":{"alt":"3DXSTAT ESD ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7133114433667,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-ABS_175_1kg__21010.1551980904.jpg?v=1594468165"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-ABS_175_1kg__21010.1551980904.jpg?v=1594468165"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-ABS_175_1kg__21010.1551980904.jpg?v=1594468165","options":["Size","Color"],"media":[{"alt":"3DXSTAT ESD ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7133114433667,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-ABS_175_1kg__21010.1551980904.jpg?v=1594468165"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-ABS_175_1kg__21010.1551980904.jpg?v=1594468165","width":1269}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e3DXSTAT™ ESD-SAFE ABS 3D Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTarget surface resistance: 10^7 to 10^9 Ohm.  Compare to Stratasys® ABS-ESD7 in performance and price and you'll never go back!  M\u003cspan\u003eade using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint industrial-grade ESD-ABS parts with Gearbox™ HT2 High-Temp 3D Printer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3DXSTAT™ ESD ABS is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection and a high level of cleanliness.  Manufactured with consistency in mind - 3DXTech starts with premium ABS and then compounded according to a proprietary formulation of multi-wall carbon nanotubes - giving you a filament with excellent printing characteristics and consistent ESD properties.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBenefits of 3DXSTAT™ include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConsistent and reliable surface resistance\u003c\/li\u003e\n\u003cli\u003eImproved retention of impact \u0026amp; elongation vs. similiar ESD-safe materials\u003c\/li\u003e\n\u003cli\u003eLow particulate contamination\u003c\/li\u003e\n\u003cli\u003eMinimal contribution to outgassing and ionic contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTypical applications include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-con:  HDD Components, Wafer Handling, Jigs, Casings, \u0026amp; Connectors \u003c\/li\u003e\n\u003cli\u003eIndustrial:  Conveying, Metering, and Sensing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTarget conductivity for 3DXSTAT™ ESD ABS:  \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10^7 to 10^9 Ohm surface resistivity on 3DP sample using concentric ring method.\u003c\/li\u003e\n\u003cli\u003eNote:  Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity.  Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry.  Therefore, expect some trial time to understand how this filament works in your specific printer \/ application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eSurface conductivity as a function of extruder temperature:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"esd-abs-resistance.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-4b4qda9b\/product_images\/uploaded_images\/esd-abs-resistance.png\" alt=\"esd-abs-resistance.png\" width=\"400\" height=\"279\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe surface resistance of the printed ESD-safe part will vary depending on the printer's extruder temperature.  For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity.  Therefore, the surface resistance can be 'dialed-in' by adjusting the extruder temperature up or down depending on the reading you receive on your part.  \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003eRecommended Print Conditions:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  220 - 240°C (desktop printers).  3DXSTAT™ ESD ABS is a filled product and has a higher melt viscosity vs. unfilled ABS.  Therefore, it is sometimes necessary to print at higher temperatures to allow the resin to flow properly.  \u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed Temp:  100-110°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  Kapton Polyimide Tape, ABS\/Acetone Slurry \u003c\/li\u003e\n\u003c\/ul\u003e"}
3DXSTAT ESD ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

3DXSTAT ESD ABS Filament - Black various sizes

$154.00 CAD

3DXSTAT™ ESD-SAFE ABS 3D Filament Target surface resistance: 10^7 to 10^9 Ohm.  Compare to Stratasys® ABS-ESD7 in performance and price and you'll never go back!  Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes. Print industrial-grade ESD-ABS parts with Gea...

Size
Color
Black

More Info
{"id":4701098508419,"title":"3DXSTAT ESD PETG Filament - Black various sizes","handle":"3dxstat-esd-petg-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003e3DXSTAT™ ESD-Safe PETG 3D FILAMENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3DXSTAT™ ESD PETG is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection.  Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.  Target surface resistance:  10^7 to 10^9 Ohm.\u003cspan\u003eat alternative to Zortrax Z-ESD.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBenefits of 3DXSTAT™ ESD-PETG include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Chemical Resistance vs. ABS\u003c\/li\u003e\n\u003cli\u003eAmorphous:  Low and near isotropic shrinkage\u003c\/li\u003e\n\u003cli\u003eLow moisture absorption:  3X lower vs. ABS\u003c\/li\u003e\n\u003cli\u003eVery low odor emitted during printing\u003c\/li\u003e\n\u003cli\u003eSuperior ductility vs. ABS\u003c\/li\u003e\n\u003cli\u003eWide processing range:  230 - 260°C\u003c\/li\u003e\n\u003cli\u003eConsistent surface resistivity\u003c\/li\u003e\n\u003cli\u003eImproved retention of impact \u0026amp; elongation\u003c\/li\u003e\n\u003cli\u003eLow particulate contamination\u003c\/li\u003e\n\u003cli\u003eMinimal contribution to outgassing and ionic contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eChemical Resistance:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTypical applications include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-con:  HDD Components, Wafer Handling, Jigs, Casings, \u0026amp; Connectors \u003c\/li\u003e\n\u003cli\u003eIndustrial:  Conveying, Metering, and Sensing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTarget conductivity for 3DXSTAT™ ESD PETG: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10^7 to 10^9 ohm surface resistivity on 3DP sample using concentric ring test method.  \u003c\/li\u003e\n\u003cli\u003eNote:  Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity.  Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry.  Therefore, expect some trial time to understand how this filament works in your specific printer \/ application.  However, please do not exceed 270°C to reduce the risk of polymer degradation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eSurface conductivity as a function of extruder temperature:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"esd-petg-resistance.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-4b4qda9b\/product_images\/uploaded_images\/esd-petg-resistance.png\" alt=\"esd-petg-resistance.png\" width=\"400\" height=\"279\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe surface resistance of the printed ESD-safe part will vary depending on the printer's extruder temperature.  For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity.  Therefore, the surface resistance can be 'dialed-in' by adjusting the extruder temperature up or down depending on the reading you receive on your part. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRecommended Print Conditions:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  Ideally 230 to 260°C\u003c\/li\u003e\n\u003cli\u003ePlatform Temp:  60 to 90°C\u003c\/li\u003e\n\u003cli\u003ePlatform Prep:  Clean glass w\/ Kapton Tape, PVA-based glue, Hairspray  \u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-03-26T17:23:47-04:00","created_at":"2020-03-26T17:23:47-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxstat","3dxtech","3mm","750g","black","ESD","esd petg","PETG","PETG 1.75mm","PETG 3mm \/ 2.85mm","petg esd","PETG filaments"],"price":12995,"price_min":12995,"price_max":12995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32859164180611,"title":"1.75mm \/ Black","option1":"1.75mm","option2":"Black","option3":null,"sku":"3DSTAT-FL-PETG-ESD-1.75-1kg-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14963365478531,"product_id":4701098508419,"position":1,"created_at":"2020-03-26T17:25:22-04:00","updated_at":"2020-07-11T07:49:26-04:00","alt":"3DXSTAT ESD PETG Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-PETG_175_1kg__51730.1551980966.jpg?v=1594468166","variant_ids":[32859164180611,32859164213379]},"available":true,"name":"3DXSTAT ESD PETG Filament - Black various sizes - 1.75mm \/ Black","public_title":"1.75mm \/ Black","options":["1.75mm","Black"],"price":12995,"weight":1500,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"64180611","featured_media":{"alt":"3DXSTAT ESD PETG Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7133252747395,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-PETG_175_1kg__51730.1551980966.jpg?v=1594468166"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32859164213379,"title":"2.85mm \/ Black","option1":"2.85mm","option2":"Black","option3":null,"sku":"3DSTAT-FL-PETG-ESD-2.85-1kg-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14963365478531,"product_id":4701098508419,"position":1,"created_at":"2020-03-26T17:25:22-04:00","updated_at":"2020-07-11T07:49:26-04:00","alt":"3DXSTAT ESD PETG Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-PETG_175_1kg__51730.1551980966.jpg?v=1594468166","variant_ids":[32859164180611,32859164213379]},"available":false,"name":"3DXSTAT ESD PETG Filament - Black various sizes - 2.85mm \/ Black","public_title":"2.85mm \/ Black","options":["2.85mm","Black"],"price":12995,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"64213379","featured_media":{"alt":"3DXSTAT ESD PETG Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7133252747395,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-PETG_175_1kg__51730.1551980966.jpg?v=1594468166"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-PETG_175_1kg__51730.1551980966.jpg?v=1594468166"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-PETG_175_1kg__51730.1551980966.jpg?v=1594468166","options":["Size","Color"],"media":[{"alt":"3DXSTAT ESD PETG Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7133252747395,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-PETG_175_1kg__51730.1551980966.jpg?v=1594468166"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-PETG_175_1kg__51730.1551980966.jpg?v=1594468166","width":1269}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e3DXSTAT™ ESD-Safe PETG 3D FILAMENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3DXSTAT™ ESD PETG is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection.  Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.  Target surface resistance:  10^7 to 10^9 Ohm.\u003cspan\u003eat alternative to Zortrax Z-ESD.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBenefits of 3DXSTAT™ ESD-PETG include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Chemical Resistance vs. ABS\u003c\/li\u003e\n\u003cli\u003eAmorphous:  Low and near isotropic shrinkage\u003c\/li\u003e\n\u003cli\u003eLow moisture absorption:  3X lower vs. ABS\u003c\/li\u003e\n\u003cli\u003eVery low odor emitted during printing\u003c\/li\u003e\n\u003cli\u003eSuperior ductility vs. ABS\u003c\/li\u003e\n\u003cli\u003eWide processing range:  230 - 260°C\u003c\/li\u003e\n\u003cli\u003eConsistent surface resistivity\u003c\/li\u003e\n\u003cli\u003eImproved retention of impact \u0026amp; elongation\u003c\/li\u003e\n\u003cli\u003eLow particulate contamination\u003c\/li\u003e\n\u003cli\u003eMinimal contribution to outgassing and ionic contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eChemical Resistance:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTypical applications include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-con:  HDD Components, Wafer Handling, Jigs, Casings, \u0026amp; Connectors \u003c\/li\u003e\n\u003cli\u003eIndustrial:  Conveying, Metering, and Sensing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTarget conductivity for 3DXSTAT™ ESD PETG: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10^7 to 10^9 ohm surface resistivity on 3DP sample using concentric ring test method.  \u003c\/li\u003e\n\u003cli\u003eNote:  Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity.  Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry.  Therefore, expect some trial time to understand how this filament works in your specific printer \/ application.  However, please do not exceed 270°C to reduce the risk of polymer degradation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eSurface conductivity as a function of extruder temperature:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"esd-petg-resistance.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-4b4qda9b\/product_images\/uploaded_images\/esd-petg-resistance.png\" alt=\"esd-petg-resistance.png\" width=\"400\" height=\"279\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe surface resistance of the printed ESD-safe part will vary depending on the printer's extruder temperature.  For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity.  Therefore, the surface resistance can be 'dialed-in' by adjusting the extruder temperature up or down depending on the reading you receive on your part. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRecommended Print Conditions:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  Ideally 230 to 260°C\u003c\/li\u003e\n\u003cli\u003ePlatform Temp:  60 to 90°C\u003c\/li\u003e\n\u003cli\u003ePlatform Prep:  Clean glass w\/ Kapton Tape, PVA-based glue, Hairspray  \u003c\/li\u003e\n\u003c\/ul\u003e"}
3DXSTAT ESD PETG Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

3DXSTAT ESD PETG Filament - Black various sizes

$129.95 CAD

3DXSTAT™ ESD-Safe PETG 3D FILAMENT 3DXSTAT™ ESD PETG is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection.  Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.  Target surface resistan...

Size
Color
Black

More Info
Sold Out
3DXSTAT ESD PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services
{"id":4700933357699,"title":"3DXSTAT ESD PLA Filament - Black various sizes","handle":"3dxstat-esd-pla-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003e3DXSTAT™ ESD-SAFE PLA 3D Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3DXSTAT™ ESD PLA is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection.   Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.  Target surface resistance:  10^7 to 10^9 Ohm.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBenefits of 3DXSTAT™ include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for printing without a heated bed - no enclosure required\u003c\/li\u003e\n\u003cli\u003eLow shrink \/ warp - very easy to print\u003c\/li\u003e\n\u003cli\u003eLow odor - ideal for printing in public spaces \/ office environments\u003c\/li\u003e\n\u003cli\u003eConsistent and reliable surface resistance\u003c\/li\u003e\n\u003cli\u003eImproved retention of impact \u0026amp; elongation vs. similiar ESD-safe materials\u003c\/li\u003e\n\u003cli\u003eLow particulate contamination\u003c\/li\u003e\n\u003cli\u003eMinimal contribution to outgassing and ionic contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTypical applications include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-con:  HDD Components, Housings, Wafer Handling, Jigs, Casings, \u0026amp; Connectors \u003c\/li\u003e\n\u003cli\u003eIndustrial:  Fixtures, Conveying, Metering, End-of-arm Tooling, and Sensing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTarget conductivity for 3DXSTAT™ ESD PLA:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpec:  10^6 to 10^9 Ohm surface resistivity on 3DP sample using concentric ring method, target 10^7 Ohm\u003c\/li\u003e\n\u003cli\u003eNote:  Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity.  Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry.  Therefore, expect some trial time to understand how this filament works in your specific printer \/ application. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eSurface conductivity as a function of extruder temperature:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"esd-pla-ultem-resistance-1.original.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-4b4qda9b\/product_images\/uploaded_images\/esd-pla-ultem-resistance-1.original.png\" alt=\"esd-pla-ultem-resistance-1.original.png\" width=\"400\" height=\"279\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe surface resistance of the printed ESD-safe part will vary depending on the printer's extruder temperature.  For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity.  Therefore, the surface resistance can be 'dialed-in' by adjusting the extruder temperature up or down depending on the reading you receive on your part.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRecommended Print Conditions:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder Temp:  Typically 210-220°C.  3DXSTAT™ ESD PLA is a filled product and has a higher melt viscosity vs. unfilled PLA.  Therefore, it is sometimes necessary to print at higher temperatures than your standard PLA to allow the resin to flow properly.  \u003c\/li\u003e\n\u003cli\u003eExtrusion Multiplier:  1.15 - 1.20\u003c\/li\u003e\n\u003cli\u003eExtrusion Speed:  60mm\/s or higher\u003c\/li\u003e\n\u003cli\u003eBed Temp:  23-60°C\u003c\/li\u003e\n\u003cli\u003eFan Speed:  50-100% starting on 2nd layer\u003c\/li\u003e\n\u003cli\u003eBed Prep:  Blue Tape, Hairspray on clean glass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2020-03-26T17:04:51-04:00","created_at":"2020-03-26T17:04:51-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxtech","3mm","750g","black","ESD","esd pla","esd pla filament","Special PLA 1.75mm","Special PLA 3mm \/ 2.85mm"],"price":15400,"price_min":15400,"price_max":15400,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32858809270403,"title":"1.75mm \/ Black","option1":"1.75mm","option2":"Black","option3":null,"sku":"3DSTAT-FL-PLA-ESD-1.75-1kg-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14963158417539,"product_id":4700933357699,"position":1,"created_at":"2020-03-26T17:07:34-04:00","updated_at":"2020-07-11T07:49:25-04:00","alt":"3DXSTAT ESD PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":416,"height":420,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-PLA_175_1kg__93665.1551981245.jpg?v=1594468165","variant_ids":[32858809270403,32858809303171]},"available":false,"name":"3DXSTAT ESD PLA Filament - Black various sizes - 1.75mm \/ Black","public_title":"1.75mm \/ Black","options":["1.75mm","Black"],"price":15400,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"09270403","featured_media":{"alt":"3DXSTAT ESD PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7133045358723,"position":1,"preview_image":{"aspect_ratio":0.99,"height":420,"width":416,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-PLA_175_1kg__93665.1551981245.jpg?v=1594468165"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32858809303171,"title":"2.85mm \/ Black","option1":"2.85mm","option2":"Black","option3":null,"sku":"3DSTAT-FL-PLA-ESD-2.85-1kg-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14963158417539,"product_id":4700933357699,"position":1,"created_at":"2020-03-26T17:07:34-04:00","updated_at":"2020-07-11T07:49:25-04:00","alt":"3DXSTAT ESD PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":416,"height":420,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-PLA_175_1kg__93665.1551981245.jpg?v=1594468165","variant_ids":[32858809270403,32858809303171]},"available":false,"name":"3DXSTAT ESD PLA Filament - Black various sizes - 2.85mm \/ Black","public_title":"2.85mm \/ Black","options":["2.85mm","Black"],"price":15400,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"09303171","featured_media":{"alt":"3DXSTAT ESD PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7133045358723,"position":1,"preview_image":{"aspect_ratio":0.99,"height":420,"width":416,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-PLA_175_1kg__93665.1551981245.jpg?v=1594468165"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-PLA_175_1kg__93665.1551981245.jpg?v=1594468165"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-PLA_175_1kg__93665.1551981245.jpg?v=1594468165","options":["Size","Color"],"media":[{"alt":"3DXSTAT ESD PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7133045358723,"position":1,"preview_image":{"aspect_ratio":0.99,"height":420,"width":416,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-PLA_175_1kg__93665.1551981245.jpg?v=1594468165"},"aspect_ratio":0.99,"height":420,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/ESD-PLA_175_1kg__93665.1551981245.jpg?v=1594468165","width":416}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e3DXSTAT™ ESD-SAFE PLA 3D Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3DXSTAT™ ESD PLA is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection.   Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.  Target surface resistance:  10^7 to 10^9 Ohm.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBenefits of 3DXSTAT™ include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for printing without a heated bed - no enclosure required\u003c\/li\u003e\n\u003cli\u003eLow shrink \/ warp - very easy to print\u003c\/li\u003e\n\u003cli\u003eLow odor - ideal for printing in public spaces \/ office environments\u003c\/li\u003e\n\u003cli\u003eConsistent and reliable surface resistance\u003c\/li\u003e\n\u003cli\u003eImproved retention of impact \u0026amp; elongation vs. similiar ESD-safe materials\u003c\/li\u003e\n\u003cli\u003eLow particulate contamination\u003c\/li\u003e\n\u003cli\u003eMinimal contribution to outgassing and ionic contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTypical applications include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-con:  HDD Components, Housings, Wafer Handling, Jigs, Casings, \u0026amp; Connectors \u003c\/li\u003e\n\u003cli\u003eIndustrial:  Fixtures, Conveying, Metering, End-of-arm Tooling, and Sensing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTarget conductivity for 3DXSTAT™ ESD PLA:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpec:  10^6 to 10^9 Ohm surface resistivity on 3DP sample using concentric ring method, target 10^7 Ohm\u003c\/li\u003e\n\u003cli\u003eNote:  Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity.  Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry.  Therefore, expect some trial time to understand how this filament works in your specific printer \/ application. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eSurface conductivity as a function of extruder temperature:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"esd-pla-ultem-resistance-1.original.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-4b4qda9b\/product_images\/uploaded_images\/esd-pla-ultem-resistance-1.original.png\" alt=\"esd-pla-ultem-resistance-1.original.png\" width=\"400\" height=\"279\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe surface resistance of the printed ESD-safe part will vary depending on the printer's extruder temperature.  For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity.  Therefore, the surface resistance can be 'dialed-in' by adjusting the extruder temperature up or down depending on the reading you receive on your part.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRecommended Print Conditions:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder Temp:  Typically 210-220°C.  3DXSTAT™ ESD PLA is a filled product and has a higher melt viscosity vs. unfilled PLA.  Therefore, it is sometimes necessary to print at higher temperatures than your standard PLA to allow the resin to flow properly.  \u003c\/li\u003e\n\u003cli\u003eExtrusion Multiplier:  1.15 - 1.20\u003c\/li\u003e\n\u003cli\u003eExtrusion Speed:  60mm\/s or higher\u003c\/li\u003e\n\u003cli\u003eBed Temp:  23-60°C\u003c\/li\u003e\n\u003cli\u003eFan Speed:  50-100% starting on 2nd layer\u003c\/li\u003e\n\u003cli\u003eBed Prep:  Blue Tape, Hairspray on clean glass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}
3DXSTAT ESD PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

3DXSTAT ESD PLA Filament - Black various sizes

$154.00 CAD

3DXSTAT™ ESD-SAFE PLA 3D Filament 3DXSTAT™ ESD PLA is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection.   Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.  Target surface resistanc...

Size
Color
Black

More Info
{"id":5747740442786,"title":"AQUATEK X1 Advanced Universal Water Soluble Support Filament, 1.75mm, 500g, Natural","handle":"aquatek-x1-advanced-universal-water-soluble-support-filament-1-75mm-500g-natural","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAquaTek™ X1 Attributes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReadily soluble in warm water\u003c\/li\u003e\n\u003cli\u003eEco-friendly - safe for disposal in house or office drains\u003c\/li\u003e\n\u003cli\u003eIdeal support material for the widest array of materials \u003c\/li\u003e\n\u003cli\u003eLow moisture absorption while exposed during printing (less tacky over time)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAquaTek™ X1 is compatible as a water soluble support for the widest array of materials including PLA, ABS, ASA, PETG, Nylon, and Flexibe grades (TPC, TPU, COPE).  This includes composite variants of these grades such as carbon fiber, glass fiber, and ESD-safe.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFilament Specs:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1.75mm +\/- 0.05mm\u003c\/li\u003e\n\u003cli\u003e2.85mm +\/- 0.05mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eRecommended Print Conditions:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  190-220°C\u003c\/li\u003e\n\u003cli\u003eBed Temp:  60-90°C\u003c\/li\u003e\n\u003cli\u003eChamber Temp:  Up to 120°C if your printer is so equipped\u003c\/li\u003e\n\u003cli\u003eStorage:  AquaTek™ X1 will absorb moisture from ambient humidity, therefore best practice is to store filament in a sealed container between uses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eRecommended Support Removal Techniques:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBreak away excess support material that is easily accessible - reduces dissolution time (more support material = longer time to dissolve)\u003c\/li\u003e\n\u003cli\u003eSubmerge part in warm water.  Hot tap water is typically 100-120°F; 38-49°C, which is generally more than adequate for dissolving AquaTek™ X1  (be safe with hot water!)\u003c\/li\u003e\n\u003cli\u003eAgitating water reduces dissolution time (sonic or mechanical agitation)\u003c\/li\u003e\n\u003cli\u003eHeat or replace warm water as it becomes cool if the support has not been removed\u003c\/li\u003e\n\u003cli\u003eResidue is ecologically safe and can be disposed of in house or office drain - rinse drain thoroughly with fresh warm water to assure waste water evacuates \u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-09-21T17:07:11-04:00","created_at":"2020-09-21T17:07:10-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","3D printer","3D Printer Filament","Dissolvable 1.75mm","epva","epva+ filament","filament","New Arrival","PVA","support filament","support material","water soluble"],"price":13199,"price_min":13199,"price_max":13199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36291532554402,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3DXT-FL-SPT-175-500G-NTRL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"AQUATEK X1 Advanced Universal Water Soluble Support Filament, 1.75mm, 500g, Natural","public_title":null,"options":["Default Title"],"price":13199,"weight":1000,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"11000147","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/aquatek-support-filament-1.jpg?v=1630540839","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/aquatek-support-filament-3.jpg?v=1630540839","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/aquatek-support-filament-2.jpg?v=1630540839"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/aquatek-support-filament-1.jpg?v=1630540839","options":["Title"],"media":[{"alt":null,"id":11514001195170,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/aquatek-support-filament-1.jpg?v=1600723708"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/aquatek-support-filament-1.jpg?v=1600723708","width":1269},{"alt":null,"id":11514001227938,"position":2,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/aquatek-support-filament-3.jpg?v=1600723709"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/aquatek-support-filament-3.jpg?v=1600723709","width":1269},{"alt":null,"id":11514001260706,"position":3,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/aquatek-support-filament-2.jpg?v=1600723709"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/aquatek-support-filament-2.jpg?v=1600723709","width":1269}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAquaTek™ X1 Attributes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReadily soluble in warm water\u003c\/li\u003e\n\u003cli\u003eEco-friendly - safe for disposal in house or office drains\u003c\/li\u003e\n\u003cli\u003eIdeal support material for the widest array of materials \u003c\/li\u003e\n\u003cli\u003eLow moisture absorption while exposed during printing (less tacky over time)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAquaTek™ X1 is compatible as a water soluble support for the widest array of materials including PLA, ABS, ASA, PETG, Nylon, and Flexibe grades (TPC, TPU, COPE).  This includes composite variants of these grades such as carbon fiber, glass fiber, and ESD-safe.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFilament Specs:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1.75mm +\/- 0.05mm\u003c\/li\u003e\n\u003cli\u003e2.85mm +\/- 0.05mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eRecommended Print Conditions:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  190-220°C\u003c\/li\u003e\n\u003cli\u003eBed Temp:  60-90°C\u003c\/li\u003e\n\u003cli\u003eChamber Temp:  Up to 120°C if your printer is so equipped\u003c\/li\u003e\n\u003cli\u003eStorage:  AquaTek™ X1 will absorb moisture from ambient humidity, therefore best practice is to store filament in a sealed container between uses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eRecommended Support Removal Techniques:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBreak away excess support material that is easily accessible - reduces dissolution time (more support material = longer time to dissolve)\u003c\/li\u003e\n\u003cli\u003eSubmerge part in warm water.  Hot tap water is typically 100-120°F; 38-49°C, which is generally more than adequate for dissolving AquaTek™ X1  (be safe with hot water!)\u003c\/li\u003e\n\u003cli\u003eAgitating water reduces dissolution time (sonic or mechanical agitation)\u003c\/li\u003e\n\u003cli\u003eHeat or replace warm water as it becomes cool if the support has not been removed\u003c\/li\u003e\n\u003cli\u003eResidue is ecologically safe and can be disposed of in house or office drain - rinse drain thoroughly with fresh warm water to assure waste water evacuates \u003c\/li\u003e\n\u003c\/ul\u003e"}
AQUATEK X1 Advanced Universal Water Soluble Support Filament, 1.75mm, 500g, Natural

AQUATEK X1 Advanced Universal Water Soluble Support Filament, 1.75mm, 500g, Natural

$131.99 CAD

AquaTek™ X1 Attributes: Readily soluble in warm water Eco-friendly - safe for disposal in house or office drains Ideal support material for the widest array of materials  Low moisture absorption while exposed during printing (less tacky over time) Compatible Materials: AquaTek™ X1 is compatible as a water soluble support for the widest array o...


More Info
{"id":4700657451139,"title":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes","handle":"3dxtech-carbonx-carbon-fiber-abs-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003eCarbonX™ Carbon Fiber Reinforced ABS Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CF-ABS is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.  Made using 15% High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber).  Made in the USA using premium Sabic MG-94 ABS and high modulus carbon fiber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint industrial-grade Carbon Fiber ABS parts with Gearbox™ HT2 High-Temp 3D Printer. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CF grades are abrasive and will quickly wear out a brass nozzle.  We recommend our A2 Hardened Steel Nozzles\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  220-240°C.  CarbonX™ CFR is a filled product and has a higher melt viscosity vs. unfilled resin.  Therefore, it is sometimes necessary to print at higher temperatures to allow the resin to flow properly.  \u003c\/li\u003e\n\u003cli\u003eBed Temp:  100-110°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  3DXTech Kapton Tape, ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eNozzle: We currently recommend minimum 0.4mm orifice. \u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2020-03-26T16:25:57-04:00","created_at":"2020-03-26T16:25:57-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxtech","3mm","750g","abs carbon fiber","ABS Filament","black","Carbon Fiber","carbon fiber filament","carbonx","cf","Special ABS 1.75mm","Special ABS 3mm \/ 2.85mm"],"price":7595,"price_min":7595,"price_max":7595,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32857993969795,"title":"1.75mm \/ Black","option1":"1.75mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-ABS-CF-1.75-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14962625151107,"product_id":4700657451139,"position":1,"created_at":"2020-03-26T16:29:35-04:00","updated_at":"2020-07-11T07:49:21-04:00","alt":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-ABS_175_750g__46307.1551980707.jpg?v=1594468161","variant_ids":[32857993969795,32857994002563]},"available":true,"name":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes - 1.75mm \/ Black","public_title":"1.75mm \/ Black","options":["1.75mm","Black"],"price":7595,"weight":1500,"compare_at_price":null,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":"93969795","featured_media":{"alt":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132511273091,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-ABS_175_750g__46307.1551980707.jpg?v=1594468161"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32857994002563,"title":"2.85mm \/ Black","option1":"2.85mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-ABS-CF-2.85-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14962625151107,"product_id":4700657451139,"position":1,"created_at":"2020-03-26T16:29:35-04:00","updated_at":"2020-07-11T07:49:21-04:00","alt":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-ABS_175_750g__46307.1551980707.jpg?v=1594468161","variant_ids":[32857993969795,32857994002563]},"available":true,"name":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes - 2.85mm \/ Black","public_title":"2.85mm \/ Black","options":["2.85mm","Black"],"price":7595,"weight":1500,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"94002563","featured_media":{"alt":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132511273091,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-ABS_175_750g__46307.1551980707.jpg?v=1594468161"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-ABS_175_750g__46307.1551980707.jpg?v=1594468161","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Carbon_Fiber_Rocket__25420.1438597211.jpg?v=1594468161"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-ABS_175_750g__46307.1551980707.jpg?v=1594468161","options":["Size","Color"],"media":[{"alt":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132511273091,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-ABS_175_750g__46307.1551980707.jpg?v=1594468161"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-ABS_175_750g__46307.1551980707.jpg?v=1594468161","width":1269},{"alt":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132531654787,"position":2,"preview_image":{"aspect_ratio":0.664,"height":1280,"width":850,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Carbon_Fiber_Rocket__25420.1438597211.jpg?v=1594468161"},"aspect_ratio":0.664,"height":1280,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Carbon_Fiber_Rocket__25420.1438597211.jpg?v=1594468161","width":850}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eCarbonX™ Carbon Fiber Reinforced ABS Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CF-ABS is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.  Made using 15% High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber).  Made in the USA using premium Sabic MG-94 ABS and high modulus carbon fiber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint industrial-grade Carbon Fiber ABS parts with Gearbox™ HT2 High-Temp 3D Printer. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CF grades are abrasive and will quickly wear out a brass nozzle.  We recommend our A2 Hardened Steel Nozzles\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  220-240°C.  CarbonX™ CFR is a filled product and has a higher melt viscosity vs. unfilled resin.  Therefore, it is sometimes necessary to print at higher temperatures to allow the resin to flow properly.  \u003c\/li\u003e\n\u003cli\u003eBed Temp:  100-110°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  3DXTech Kapton Tape, ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eNozzle: We currently recommend minimum 0.4mm orifice. \u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}
CARBONX™ Carbon Fiber ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

CARBONX™ Carbon Fiber ABS Filament - Black various sizes

$75.95 CAD

CarbonX™ Carbon Fiber Reinforced ABS Filament CarbonX™ CF-ABS is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.  Made using 15% High-Modulus Carbon Fiber (not carbon powder or mill...

Size
Color
Black

More Info
Sold Out
CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black 1.75mm 500g
{"id":6959067037858,"title":"CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black 1.75mm 500g","handle":"carbonx-carbon-fiber-nylon-gen-3-filament-black-500g","description":"\u003cp\u003e\u003cstrong\u003eGen3 CarbonX™ Carbon Fiber Reinforced Nylon 3D Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGen 3 CarbonX™ CF-Nylon Filament is an advanced semi-aromatic polyamide copolymer reinforced with high-modulus carbon fiber.  This filament is ideal for anyone that desires a structural component with high modulus, improved chemical and thermal resistance, excellent surface quality, and ease of printing.  Tired of nylon that warps?  This is the answer you've been looking for.  Excellent dimensional stability comes from the carbon fiber and the semi-aromatic nylon.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarbon Fiber Printer:  \u003c\/strong\u003ePrint industrial-grade CF-NYLON parts with Gearbox™ HT2 High-Temp 3D Printer.\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Performance + High Temp Resistance: \u003c\/strong\u003e Gen3 CarbonX™ CF-Nylon is a PA6 copolymer made using high-modulus carbon fiber and state-of-the-art compounding and extrusion technology.  Gen3 has higher HDT than our previous grades (147°C at .45MPa) allowing for expanded use in higher-temp applications.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  240-270°C.  CarbonX™ CFR Nylon exhibits improved layer bonding at higher temperatures.  \u003c\/li\u003e\n\u003cli\u003eBed Temp:  80 - 100°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  Polyimide Tape, Clean glass with ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eHardened Nozzle: 0.4mm or larger.  We strongly recommend our A2 Hardened Steel Nozzles\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2021-07-27T11:47:12-04:00","created_at":"2021-07-27T11:31:38-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","3dxtech","3mm","abs cf","cafbon fiber nylon","Carbon Fiber","carbon fiber filament","carbonx","cf","cf nylon","cf pc","newfront","Nylon 1.75 mm","Nylon 1.75mm","nylon carbon fiber","nylon cf","nylon filament","pc cf","Polycarbonate 1.75mm"],"price":6995,"price_min":6995,"price_max":6995,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40483551608994,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3DXTECH-FL-NYL-CF-1.75-500G-BLK","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black 1.75mm 500g","public_title":null,"options":["Default Title"],"price":6995,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"51608994","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/3DXTECH-CarbonX-CY-Nylon-G3.png?v=1630541232"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/3DXTECH-CarbonX-CY-Nylon-G3.png?v=1630541232","options":["Title"],"media":[{"alt":null,"id":22733730054306,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/3DXTECH-CarbonX-CY-Nylon-G3.png?v=1627400651"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/3DXTECH-CarbonX-CY-Nylon-G3.png?v=1627400651","width":1269}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eGen3 CarbonX™ Carbon Fiber Reinforced Nylon 3D Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGen 3 CarbonX™ CF-Nylon Filament is an advanced semi-aromatic polyamide copolymer reinforced with high-modulus carbon fiber.  This filament is ideal for anyone that desires a structural component with high modulus, improved chemical and thermal resistance, excellent surface quality, and ease of printing.  Tired of nylon that warps?  This is the answer you've been looking for.  Excellent dimensional stability comes from the carbon fiber and the semi-aromatic nylon.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarbon Fiber Printer:  \u003c\/strong\u003ePrint industrial-grade CF-NYLON parts with Gearbox™ HT2 High-Temp 3D Printer.\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Performance + High Temp Resistance: \u003c\/strong\u003e Gen3 CarbonX™ CF-Nylon is a PA6 copolymer made using high-modulus carbon fiber and state-of-the-art compounding and extrusion technology.  Gen3 has higher HDT than our previous grades (147°C at .45MPa) allowing for expanded use in higher-temp applications.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  240-270°C.  CarbonX™ CFR Nylon exhibits improved layer bonding at higher temperatures.  \u003c\/li\u003e\n\u003cli\u003eBed Temp:  80 - 100°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  Polyimide Tape, Clean glass with ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eHardened Nozzle: 0.4mm or larger.  We strongly recommend our A2 Hardened Steel Nozzles\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}
CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black 1.75mm 500g

CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black 1.75mm 500g

$69.95 CAD

Gen3 CarbonX™ Carbon Fiber Reinforced Nylon 3D Filament Gen 3 CarbonX™ CF-Nylon Filament is an advanced semi-aromatic polyamide copolymer reinforced with high-modulus carbon fiber.  This filament is ideal for anyone that desires a structural component with high modulus, improved chemical and thermal resistance, excellent surface quality, and eas...


More Info
{"id":4700847112323,"title":"CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black various sizes","handle":"3dxtech-carbonx-carbon-fiber-nylon-gen-3-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003eGen3 CarbonX™ Carbon Fiber Reinforced Nylon 3D Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGen 3 CarbonX™ CF-Nylon Filament is an advanced semi-aromatic polyamide copolymer reinforced with high-modulus carbon fiber.  This filament is ideal for anyone that desires a structural component with high modulus, improved chemical and thermal resistance, excellent surface quality, and ease of printing.  Tired of nylon that warps?  This is the answer you've been looking for.  Excellent dimensional stability comes from the carbon fiber and the semi-aromatic nylon.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarbon Fiber Printer:  \u003c\/strong\u003ePrint industrial-grade CF-NYLON parts with Gearbox™ HT2 High-Temp 3D Printer.\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Performance + High Temp Resistance: \u003c\/strong\u003e Gen3 CarbonX™ CF-Nylon is a PA6 copolymer made using high-modulus carbon fiber and state-of-the-art compounding and extrusion technology.  Gen3 has higher HDT than our previous grades (147°C at .45MPa) allowing for expanded use in higher-temp applications.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  240-270°C.  CarbonX™ CFR Nylon exhibits improved layer bonding at higher temperatures.  \u003c\/li\u003e\n\u003cli\u003eBed Temp:  80 - 100°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  Polyimide Tape, Clean glass with ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eHardened Nozzle: 0.4mm or larger.  We strongly recommend our A2 Hardened Steel Nozzles\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2020-03-26T16:54:21-04:00","created_at":"2020-03-26T16:54:21-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxtech","3mm","750g","abs cf","black","cafbon fiber nylon","Carbon Fiber","carbon fiber filament","carbonx","cf","cf nylon","cf pc","Nylon 1.75 mm","Nylon 1.75mm","Nylon 3 mm \/ 2.85 mm","nylon carbon fiber","nylon cf","nylon filament","pc cf","Polycarbonate 1.75mm","Polycarbonate 2.85 mm"],"price":8995,"price_min":8995,"price_max":8995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32858610598019,"title":"1.75mm \/ Black","option1":"1.75mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-NYL-CF-1.75-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14963022069891,"product_id":4700847112323,"position":1,"created_at":"2020-03-26T16:56:28-04:00","updated_at":"2020-07-11T07:49:24-04:00","alt":"CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-Nylon_175_750g__98809.1551884281.jpg?v=1594468164","variant_ids":[32858610598019,32858610630787]},"available":false,"name":"CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black various sizes - 1.75mm \/ Black","public_title":"1.75mm \/ Black","options":["1.75mm","Black"],"price":8995,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10598019","featured_media":{"alt":"CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132908781699,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-Nylon_175_750g__98809.1551884281.jpg?v=1594468164"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32858610630787,"title":"2.85mm \/ Black","option1":"2.85mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-NYL-CF-2.85-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14963022069891,"product_id":4700847112323,"position":1,"created_at":"2020-03-26T16:56:28-04:00","updated_at":"2020-07-11T07:49:24-04:00","alt":"CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-Nylon_175_750g__98809.1551884281.jpg?v=1594468164","variant_ids":[32858610598019,32858610630787]},"available":true,"name":"CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black various sizes - 2.85mm \/ Black","public_title":"2.85mm \/ Black","options":["2.85mm","Black"],"price":8995,"weight":1500,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10630787","featured_media":{"alt":"CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132908781699,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-Nylon_175_750g__98809.1551884281.jpg?v=1594468164"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-Nylon_175_750g__98809.1551884281.jpg?v=1594468164"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-Nylon_175_750g__98809.1551884281.jpg?v=1594468164","options":["Size","Color"],"media":[{"alt":"CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132908781699,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-Nylon_175_750g__98809.1551884281.jpg?v=1594468164"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-Nylon_175_750g__98809.1551884281.jpg?v=1594468164","width":1269}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eGen3 CarbonX™ Carbon Fiber Reinforced Nylon 3D Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGen 3 CarbonX™ CF-Nylon Filament is an advanced semi-aromatic polyamide copolymer reinforced with high-modulus carbon fiber.  This filament is ideal for anyone that desires a structural component with high modulus, improved chemical and thermal resistance, excellent surface quality, and ease of printing.  Tired of nylon that warps?  This is the answer you've been looking for.  Excellent dimensional stability comes from the carbon fiber and the semi-aromatic nylon.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarbon Fiber Printer:  \u003c\/strong\u003ePrint industrial-grade CF-NYLON parts with Gearbox™ HT2 High-Temp 3D Printer.\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Performance + High Temp Resistance: \u003c\/strong\u003e Gen3 CarbonX™ CF-Nylon is a PA6 copolymer made using high-modulus carbon fiber and state-of-the-art compounding and extrusion technology.  Gen3 has higher HDT than our previous grades (147°C at .45MPa) allowing for expanded use in higher-temp applications.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  240-270°C.  CarbonX™ CFR Nylon exhibits improved layer bonding at higher temperatures.  \u003c\/li\u003e\n\u003cli\u003eBed Temp:  80 - 100°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  Polyimide Tape, Clean glass with ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eHardened Nozzle: 0.4mm or larger.  We strongly recommend our A2 Hardened Steel Nozzles\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}
CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black various sizes

$89.95 CAD

Gen3 CarbonX™ Carbon Fiber Reinforced Nylon 3D Filament Gen 3 CarbonX™ CF-Nylon Filament is an advanced semi-aromatic polyamide copolymer reinforced with high-modulus carbon fiber.  This filament is ideal for anyone that desires a structural component with high modulus, improved chemical and thermal resistance, excellent surface quality, and eas...

Size
Color
Black

More Info
{"id":4700755853443,"title":"CARBONX™ Carbon Fiber PC Filament - Black various sizes","handle":"3dxtech-carbonx-carbon-fiber-pc-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003eCarbonX™ Carbon Fiber Reinforced Polycarbonate (PC) Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CF-PC is a high-performance carbon fiber reinforced PC filament.  This filament is ideal for anyone that desires a structural component with high heat, high stiffness, excellent surface quality, and dimensional stability.  Polycarbonate has a Tg of 147°C and offers some of the highest thermal performance on the 3D market.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint industrial-grade Carbon Fiber PC parts with Gearbox™ HT2 High-Temp 3D Printer. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  280-310°C\u003c\/li\u003e\n\u003cli\u003eBed Temp:  110-120°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  PEI Sheet or tape, Kapton\/PI Tape, Glue stick on clean glass, ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eNozzle: We strongly recommend a 0.4mm orifice or larger using one of our A2 Hardened Nozzles\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2020-03-26T16:42:55-04:00","created_at":"2020-03-26T16:42:55-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxtech","3mm","750g","black","Carbon Fiber","carbon fiber filament","carbonx","cf","cf pc","pc cf","Polycarbonate 1.75mm","Polycarbonate 2.85 mm"],"price":11495,"price_min":11495,"price_max":11495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32858361823363,"title":"1.75mm \/ Black","option1":"1.75mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-PC-CF-1.75-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14962845515907,"product_id":4700755853443,"position":1,"created_at":"2020-03-26T16:43:45-04:00","updated_at":"2020-07-11T07:49:22-04:00","alt":"CARBONX™ Carbon Fiber PC Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PC_175_750g__53266.1553083206.jpg?v=1594468162","variant_ids":[32858361823363,32858361856131]},"available":true,"name":"CARBONX™ Carbon Fiber PC Filament - Black various sizes - 1.75mm \/ Black","public_title":"1.75mm \/ Black","options":["1.75mm","Black"],"price":11495,"weight":1500,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"61823363","featured_media":{"alt":"CARBONX™ Carbon Fiber PC Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132731637891,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PC_175_750g__53266.1553083206.jpg?v=1594468162"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32858361856131,"title":"2.85mm \/ Black","option1":"2.85mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-PC-CF-2.85-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14962845515907,"product_id":4700755853443,"position":1,"created_at":"2020-03-26T16:43:45-04:00","updated_at":"2020-07-11T07:49:22-04:00","alt":"CARBONX™ Carbon Fiber PC Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PC_175_750g__53266.1553083206.jpg?v=1594468162","variant_ids":[32858361823363,32858361856131]},"available":true,"name":"CARBONX™ Carbon Fiber PC Filament - Black various sizes - 2.85mm \/ Black","public_title":"2.85mm \/ Black","options":["2.85mm","Black"],"price":11495,"weight":1500,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"61856131","featured_media":{"alt":"CARBONX™ Carbon Fiber PC Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132731637891,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PC_175_750g__53266.1553083206.jpg?v=1594468162"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PC_175_750g__53266.1553083206.jpg?v=1594468162"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PC_175_750g__53266.1553083206.jpg?v=1594468162","options":["Size","Color"],"media":[{"alt":"CARBONX™ Carbon Fiber PC Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132731637891,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PC_175_750g__53266.1553083206.jpg?v=1594468162"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PC_175_750g__53266.1553083206.jpg?v=1594468162","width":1269}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eCarbonX™ Carbon Fiber Reinforced Polycarbonate (PC) Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CF-PC is a high-performance carbon fiber reinforced PC filament.  This filament is ideal for anyone that desires a structural component with high heat, high stiffness, excellent surface quality, and dimensional stability.  Polycarbonate has a Tg of 147°C and offers some of the highest thermal performance on the 3D market.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint industrial-grade Carbon Fiber PC parts with Gearbox™ HT2 High-Temp 3D Printer. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  280-310°C\u003c\/li\u003e\n\u003cli\u003eBed Temp:  110-120°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  PEI Sheet or tape, Kapton\/PI Tape, Glue stick on clean glass, ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eNozzle: We strongly recommend a 0.4mm orifice or larger using one of our A2 Hardened Nozzles\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}
CARBONX™ Carbon Fiber PC Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

CARBONX™ Carbon Fiber PC Filament - Black various sizes

$114.95 CAD

CarbonX™ Carbon Fiber Reinforced Polycarbonate (PC) Filament CarbonX™ CF-PC is a high-performance carbon fiber reinforced PC filament.  This filament is ideal for anyone that desires a structural component with high heat, high stiffness, excellent surface quality, and dimensional stability.  Polycarbonate has a Tg of 147°C and offers some of the...

Size
Color
Black

More Info
{"id":4700790325379,"title":"CARBONX™ Carbon Fiber PC\/ABS Filament - Black various sizes","handle":"3dxtech-carbonx-carbon-fiber-pc-abs-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003eCarbonX™ Carbon Fiber Reinforced PC\/ABS Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CF-PC\/ABS has been formulated to offer improved thermal resistance and mechanical properties while retaining an ease of printability that makes it ideal for anyone seeking a structural component with high heat, high stiffness, excellent surface quality, and dimensional stability. \u003c\/p\u003e\n\u003cp\u003ePrint industrial-grade Carbon Fiber PC\/ABS parts with Gearbox™ HT2 High-Temp 3D Printer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  280-300°C\u003c\/li\u003e\n\u003cli\u003eBed Temp:  100-120°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  PEI Sheet or tape, Kapton\/PI Tape, Glue stick on clean glass, ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eNozzle: We strongly recommend a 0.4mm orifice or larger using one of our A2 Hardened Nozzle\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2020-03-26T16:47:32-04:00","created_at":"2020-03-26T16:47:32-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxtech","3mm","750g","abs cf","black","Carbon Fiber","carbon fiber filament","carbonx","cf","cf abs","cf pc","pc abs","pc cf","pcabs","Polycarbonate 1.75mm","Polycarbonate 2.85 mm","Special ABS 1.75mm","Special ABS 3mm \/ 2.85mm"],"price":8995,"price_min":8995,"price_max":8995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32858460356739,"title":"1.75mm \/ Black","option1":"1.75mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-PC-ABS-1.75-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14962951127171,"product_id":4700790325379,"position":1,"created_at":"2020-03-26T16:51:03-04:00","updated_at":"2020-07-11T07:49:23-04:00","alt":"CARBONX™ Carbon Fiber PC\/ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PC-ABS_175_750g__43579.1566221329.jpg?v=1594468163","variant_ids":[32858460356739,32858460389507]},"available":false,"name":"CARBONX™ Carbon Fiber PC\/ABS Filament - Black various sizes - 1.75mm \/ Black","public_title":"1.75mm \/ Black","options":["1.75mm","Black"],"price":8995,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"60356739","featured_media":{"alt":"CARBONX™ Carbon Fiber PC\/ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132837478531,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PC-ABS_175_750g__43579.1566221329.jpg?v=1594468163"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32858460389507,"title":"2.85mm \/ Black","option1":"2.85mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-PC-ABS-2.85-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14962951127171,"product_id":4700790325379,"position":1,"created_at":"2020-03-26T16:51:03-04:00","updated_at":"2020-07-11T07:49:23-04:00","alt":"CARBONX™ Carbon Fiber PC\/ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PC-ABS_175_750g__43579.1566221329.jpg?v=1594468163","variant_ids":[32858460356739,32858460389507]},"available":true,"name":"CARBONX™ Carbon Fiber PC\/ABS Filament - Black various sizes - 2.85mm \/ Black","public_title":"2.85mm \/ Black","options":["2.85mm","Black"],"price":8995,"weight":1500,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"60389507","featured_media":{"alt":"CARBONX™ Carbon Fiber PC\/ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132837478531,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PC-ABS_175_750g__43579.1566221329.jpg?v=1594468163"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PC-ABS_175_750g__43579.1566221329.jpg?v=1594468163"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PC-ABS_175_750g__43579.1566221329.jpg?v=1594468163","options":["Size","Color"],"media":[{"alt":"CARBONX™ Carbon Fiber PC\/ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132837478531,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PC-ABS_175_750g__43579.1566221329.jpg?v=1594468163"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PC-ABS_175_750g__43579.1566221329.jpg?v=1594468163","width":1269}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eCarbonX™ Carbon Fiber Reinforced PC\/ABS Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CF-PC\/ABS has been formulated to offer improved thermal resistance and mechanical properties while retaining an ease of printability that makes it ideal for anyone seeking a structural component with high heat, high stiffness, excellent surface quality, and dimensional stability. \u003c\/p\u003e\n\u003cp\u003ePrint industrial-grade Carbon Fiber PC\/ABS parts with Gearbox™ HT2 High-Temp 3D Printer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  280-300°C\u003c\/li\u003e\n\u003cli\u003eBed Temp:  100-120°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  PEI Sheet or tape, Kapton\/PI Tape, Glue stick on clean glass, ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eNozzle: We strongly recommend a 0.4mm orifice or larger using one of our A2 Hardened Nozzle\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}
CARBONX™ Carbon Fiber PC/ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

CARBONX™ Carbon Fiber PC/ABS Filament - Black various sizes

$89.95 CAD

CarbonX™ Carbon Fiber Reinforced PC/ABS Filament CarbonX™ CF-PC/ABS has been formulated to offer improved thermal resistance and mechanical properties while retaining an ease of printability that makes it ideal for anyone seeking a structural component with high heat, high stiffness, excellent surface quality, and dimensional stability.  Print i...

Size
Color
Black

More Info
{"id":4700701130883,"title":"CARBONX™ Carbon Fiber PETG Filament - Black various sizes","handle":"3dxtech-carbonx-carbon-fiber-petg-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003eCarbonX™ CFR Carbon Fiber Reinforced Co-Polyester Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMade in the USA using premium PETG and High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber).  CarbonX™ CF-PETG is an improved CF reinforced 3D printing filament vs. the competition.  This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.  \u003c\/p\u003e\n\u003cp\u003ePrint industrial-grade CF-PETG parts with Gearbox™ HT2 High-Temp 3D Printer. \u003c\/p\u003e\n\u003cp\u003eCarbon fiber reinforced filaments are abrasive and can wear out a brass or aluminum nozzle.  We recommend our A2 Hardened Steel Nozzles\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBenefits of CarbonX™ CF-PETG include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Chemical Resistance vs. ABS\u003c\/li\u003e\n\u003cli\u003eAmorphous:  Low and near isotropic shrinkage\u003c\/li\u003e\n\u003cli\u003eLow moisture absorption:  3X lower vs. ABS\u003c\/li\u003e\n\u003cli\u003eVery low odor emitted during printing\u003c\/li\u003e\n\u003cli\u003eWide processing range:  230 - 270°C \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChemical Resistance:\u003c\/strong\u003e  Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  Ideally 230 to 260°C\u003c\/li\u003e\n\u003cli\u003ePlatform Temp:  70 to 90°C\u003c\/li\u003e\n\u003cli\u003ePlatform Prep:  Clean glass w\/ Kapton Tape, PVA-based glue, Hairspray\u003c\/li\u003e\n\u003cli\u003eNozzle:  We currently recommend minimum 0.40mm orifice.  \u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.2mm with CF Grades.  \u003c\/li\u003e\n\u003cli\u003eCarbon fiber filament is more abrasive than unfilled materials, so extended use will result in more wear on your nozzle. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2020-03-26T16:33:10-04:00","created_at":"2020-03-26T16:33:10-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxtech","3mm","750g","black","Carbon Fiber","carbon fiber filament","carbonx","cf","PETG 1.75mm","PETG 3mm \/ 2.85mm","petg carbon fiber","petg cf"],"price":7595,"price_min":7595,"price_max":7595,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32858167607427,"title":"1.75mm \/ Black","option1":"1.75mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-PETG-CF-1.75-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14962738364547,"product_id":4700701130883,"position":1,"created_at":"2020-03-26T16:36:26-04:00","updated_at":"2020-07-11T07:49:22-04:00","alt":"CARBONX™ Carbon Fiber PETG Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PETG_175_750g__57796.1551980630.jpg?v=1594468162","variant_ids":[32858167607427,32858167640195]},"available":true,"name":"CARBONX™ Carbon Fiber PETG Filament - Black various sizes - 1.75mm \/ Black","public_title":"1.75mm \/ Black","options":["1.75mm","Black"],"price":7595,"weight":1500,"compare_at_price":null,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":"67607427","featured_media":{"alt":"CARBONX™ Carbon Fiber PETG Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132624420995,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PETG_175_750g__57796.1551980630.jpg?v=1594468162"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32858167640195,"title":"2.85mm \/ Black","option1":"2.85mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-PETG-CF-2.85-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14962738364547,"product_id":4700701130883,"position":1,"created_at":"2020-03-26T16:36:26-04:00","updated_at":"2020-07-11T07:49:22-04:00","alt":"CARBONX™ Carbon Fiber PETG Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PETG_175_750g__57796.1551980630.jpg?v=1594468162","variant_ids":[32858167607427,32858167640195]},"available":true,"name":"CARBONX™ Carbon Fiber PETG Filament - Black various sizes - 2.85mm \/ Black","public_title":"2.85mm \/ Black","options":["2.85mm","Black"],"price":7595,"weight":1500,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"67640195","featured_media":{"alt":"CARBONX™ Carbon Fiber PETG Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132624420995,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PETG_175_750g__57796.1551980630.jpg?v=1594468162"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PETG_175_750g__57796.1551980630.jpg?v=1594468162"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PETG_175_750g__57796.1551980630.jpg?v=1594468162","options":["Size","Color"],"media":[{"alt":"CARBONX™ Carbon Fiber PETG Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132624420995,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PETG_175_750g__57796.1551980630.jpg?v=1594468162"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PETG_175_750g__57796.1551980630.jpg?v=1594468162","width":1269}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eCarbonX™ CFR Carbon Fiber Reinforced Co-Polyester Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMade in the USA using premium PETG and High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber).  CarbonX™ CF-PETG is an improved CF reinforced 3D printing filament vs. the competition.  This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.  \u003c\/p\u003e\n\u003cp\u003ePrint industrial-grade CF-PETG parts with Gearbox™ HT2 High-Temp 3D Printer. \u003c\/p\u003e\n\u003cp\u003eCarbon fiber reinforced filaments are abrasive and can wear out a brass or aluminum nozzle.  We recommend our A2 Hardened Steel Nozzles\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBenefits of CarbonX™ CF-PETG include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Chemical Resistance vs. ABS\u003c\/li\u003e\n\u003cli\u003eAmorphous:  Low and near isotropic shrinkage\u003c\/li\u003e\n\u003cli\u003eLow moisture absorption:  3X lower vs. ABS\u003c\/li\u003e\n\u003cli\u003eVery low odor emitted during printing\u003c\/li\u003e\n\u003cli\u003eWide processing range:  230 - 270°C \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChemical Resistance:\u003c\/strong\u003e  Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  Ideally 230 to 260°C\u003c\/li\u003e\n\u003cli\u003ePlatform Temp:  70 to 90°C\u003c\/li\u003e\n\u003cli\u003ePlatform Prep:  Clean glass w\/ Kapton Tape, PVA-based glue, Hairspray\u003c\/li\u003e\n\u003cli\u003eNozzle:  We currently recommend minimum 0.40mm orifice.  \u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.2mm with CF Grades.  \u003c\/li\u003e\n\u003cli\u003eCarbon fiber filament is more abrasive than unfilled materials, so extended use will result in more wear on your nozzle. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}
CARBONX™ Carbon Fiber PETG Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

CARBONX™ Carbon Fiber PETG Filament - Black various sizes

$75.95 CAD

CarbonX™ CFR Carbon Fiber Reinforced Co-Polyester Filament Made in the USA using premium PETG and High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber).  CarbonX™ CF-PETG is an improved CF reinforced 3D printing filament vs. the competition.  This filament is ideal for anyone that desires a structural component with high modulus, ...

Size
Color
Black

More Info
{"id":4700363915395,"title":"CARBONX™ Carbon Fiber PLA Filament - Black various sizes","handle":"3dxtech-carbonx-carbon-fiber-pla-filament-black","description":"\u003ch1 class=\"product-header\"\u003e\n\u003cstrong\u003eCarbonX™ CFR Carbon Fiber Reinforced PLA Filament\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eCarbonX™ CFR-PLA is an improved CF reinforced 3D printing filament vs. the competition.  Made using High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber).  This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.  Made in the USA using premium Natureworks PLA and high modulus carbon fiber.  \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNO heated bed required!  \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CFR PLA is suitable for use in practically any desktop 3D Printer.  Please note - carbon fiber reinforced filaments are abrasive and can wear out a brass or aluminum nozzle.  We recommend our A2 Hardened Steel Nozzles\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  190-220°C.  \u003c\/li\u003e\n\u003cli\u003eBed Temp:  23 - 60°C  (Heated bed NOT necessary)  \u003c\/li\u003e\n\u003cli\u003eBed Prep:  3DXTech Blue Painters Tape, PVA-based Glue, Hairspray on clean glass\u003c\/li\u003e\n\u003cli\u003eNozzle: We strongly recommend a 0.4mm orifice or larger using one of our A2 Hardened Nozzles\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2020-03-26T15:14:31-04:00","created_at":"2020-03-26T15:35:00-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxtech","3mm","750g","black","Carbon Fiber","carbon fiber filament","carbonx","cf","pla cf","Special PLA 1.75mm","Special PLA 3mm \/ 2.85mm"],"price":7595,"price_min":7595,"price_max":7595,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32856696094851,"title":"1.75mm \/ Black","option1":"1.75mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-PLA-CF-1.75-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14961747329155,"product_id":4700363915395,"position":1,"created_at":"2020-03-26T15:35:02-04:00","updated_at":"2020-07-11T07:49:20-04:00","alt":"CARBONX™ Carbon Fiber PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PLA_175_750g__60142.1551980769.jpg?v=1594468160","variant_ids":[32856696094851,32856696127619]},"available":true,"name":"CARBONX™ Carbon Fiber PLA Filament - Black various sizes - 1.75mm \/ Black","public_title":"1.75mm \/ Black","options":["1.75mm","Black"],"price":7595,"weight":1500,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"96094851","featured_media":{"alt":"CARBONX™ Carbon Fiber PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7131632795779,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PLA_175_750g__60142.1551980769.jpg?v=1594468160"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32856696127619,"title":"2.85mm \/ Black","option1":"2.85mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-PLA-CF-2.85-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14961747329155,"product_id":4700363915395,"position":1,"created_at":"2020-03-26T15:35:02-04:00","updated_at":"2020-07-11T07:49:20-04:00","alt":"CARBONX™ Carbon Fiber PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PLA_175_750g__60142.1551980769.jpg?v=1594468160","variant_ids":[32856696094851,32856696127619]},"available":false,"name":"CARBONX™ Carbon Fiber PLA Filament - Black various sizes - 2.85mm \/ Black","public_title":"2.85mm \/ Black","options":["2.85mm","Black"],"price":7595,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"96127619","featured_media":{"alt":"CARBONX™ Carbon Fiber PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7131632795779,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PLA_175_750g__60142.1551980769.jpg?v=1594468160"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PLA_175_750g__60142.1551980769.jpg?v=1594468160"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PLA_175_750g__60142.1551980769.jpg?v=1594468160","options":["Size","Color"],"media":[{"alt":"CARBONX™ Carbon Fiber PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7131632795779,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PLA_175_750g__60142.1551980769.jpg?v=1594468160"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/CF-PLA_175_750g__60142.1551980769.jpg?v=1594468160","width":1269}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1 class=\"product-header\"\u003e\n\u003cstrong\u003eCarbonX™ CFR Carbon Fiber Reinforced PLA Filament\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eCarbonX™ CFR-PLA is an improved CF reinforced 3D printing filament vs. the competition.  Made using High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber).  This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.  Made in the USA using premium Natureworks PLA and high modulus carbon fiber.  \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNO heated bed required!  \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CFR PLA is suitable for use in practically any desktop 3D Printer.  Please note - carbon fiber reinforced filaments are abrasive and can wear out a brass or aluminum nozzle.  We recommend our A2 Hardened Steel Nozzles\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  190-220°C.  \u003c\/li\u003e\n\u003cli\u003eBed Temp:  23 - 60°C  (Heated bed NOT necessary)  \u003c\/li\u003e\n\u003cli\u003eBed Prep:  3DXTech Blue Painters Tape, PVA-based Glue, Hairspray on clean glass\u003c\/li\u003e\n\u003cli\u003eNozzle: We strongly recommend a 0.4mm orifice or larger using one of our A2 Hardened Nozzles\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}
CARBONX™ Carbon Fiber PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

CARBONX™ Carbon Fiber PLA Filament - Black various sizes

$75.95 CAD

CarbonX™ CFR Carbon Fiber Reinforced PLA Filament CarbonX™ CFR-PLA is an improved CF reinforced 3D printing filament vs. the competition.  Made using High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber).  This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensio...

Size
Color
Black

More Info
{"id":6959110586530,"title":"CARBONX™ EZPC (POLYCARBONATE) - 1.75mm 750g","handle":"carbonx-ezpc-polycarbonate-1-75mm-750g","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eezPC™ (Polycarbonate) is a premium Polycarbonate created for ease of printing on the widest array of 3D printers. ezPC™ prints like a dream while offering low warp, excellent mechanical properties, heat resistance, and outstanding impact resistance. Ease of printing and excellent properties – the best of both worlds!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eezPC™ Polycarbonate is an excellent choice for printing parts that would ordinarily fail when using standard materials such as PLA, PETG, or ABS. We consider this an excellent bridge in performance between these lower performance materials and higher priced materials such as Ultem or PEEK.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eBenefits of ezPC Include:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLow warp, high heat resistance, and excellent mechanical properties\u003c\/li\u003e\n\u003cli\u003eEase of use on a wide array of printers, no heated chamber needed!\u003c\/li\u003e\n\u003cli\u003eHigh thermal properties with a Tg of 118°C and HDT of 112°C\u003c\/li\u003e\n\u003cli\u003eSuperior thermal properties vs. PLA, PETG, ABS, and ASA\u003c\/li\u003e\n\u003cli\u003eNo odors or hazardous fumes while printing making it ideal for a home or office environment\u003c\/li\u003e\n\u003cli\u003ePerfect for functional end-use parts as well as prototypes\u003c\/li\u003e\n\u003cli\u003eExcellent adhesion to our \u003ca href=\"https:\/\/www.digitmakers.ca\/products\/aquatek-x1-advanced-universal-water-soluble-support-filament-1-75mm-500g-natural\"\u003eAquaTek™\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eX1 USM Water Soluble Support\u003c\/span\u003e \u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eProduct Data Sheet can be found \u003ca href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/04\/UN_ezPC_v01.pdf\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/04\/UN_ezPC_v01.pdf\"\u003e\u003cstrong\u003eHERE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSafety Data Sheet can be found \u003ca href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/04\/ezPC_SDS_v01.pdf\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/04\/ezPC_SDS_v01.pdf\"\u003e\u003cstrong\u003eHERE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDual Extrusion Printer:\u003c\/strong\u003e\u003cbr\u003eezPC™ Polycarbonate adheres very well to our X1 USM Water Soluble Support. This allows you to print complex engineering-grade applications with complex geometry and wash the supports away in warm water. \u003ca href=\"https:\/\/www.digitmakers.ca\/products\/aquatek-x1-advanced-universal-water-soluble-support-filament-1-75mm-500g-natural\"\u003eAquaTek™ X1\u003c\/a\u003e is bio-safe and can be disposed of in home or office waste disposal drains.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003ePrint settings:\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eExtruder Temp: \u003c\/strong\u003e255-275°C\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBed Temp: \u003c\/strong\u003e90-110°C\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint Speed:\u003c\/strong\u003e 40-60mm\/s\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHeated Chamber: \u003c\/strong\u003eNot required\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFan Speed:\u003c\/strong\u003e Not required\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNozzle Specs: \u003c\/strong\u003eNo special concerns\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBed Adhesion: \u003c\/strong\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/pages\/search-results-page?q=visionminer\" data-mce-href=\"https:\/\/www.digitmakers.ca\/pages\/search-results-page?q=visionminer\"\u003eNano Polymer Adhesive\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eLayer Height: \u003c\/strong\u003eNo special concerns\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDrying Specs: \u003c\/strong\u003e80°C for 4+ hours\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSupports: \u003c\/strong\u003eWorks best with X1 USM Water Soluble Support\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003ePlease note that this material absorbs moisture after opening from the package and may need to be dried for optimal printing. If drying is necessary, please dry at 80°C for a minimum of 4 hours.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2021-07-27T12:25:17-04:00","created_at":"2021-07-27T11:54:09-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","3dxtech","3DXTECH EZPC","750g","black","EZPC","newfront","Polycarbonate 1.75mm","polycarbonate black"],"price":6499,"price_min":6499,"price_max":6499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40483758735522,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3DXTECH-FL-EZPC-1.75-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"CARBONX™ EZPC (POLYCARBONATE) - 1.75mm 750g","public_title":null,"options":["Default Title"],"price":6499,"weight":1500,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"58735522","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/3DXTECHEZPC.png?v=1630541299"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/3DXTECHEZPC.png?v=1630541299","options":["Title"],"media":[{"alt":null,"id":22733944619170,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/3DXTECHEZPC.png?v=1627402423"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/3DXTECHEZPC.png?v=1627402423","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eezPC™ (Polycarbonate) is a premium Polycarbonate created for ease of printing on the widest array of 3D printers. ezPC™ prints like a dream while offering low warp, excellent mechanical properties, heat resistance, and outstanding impact resistance. Ease of printing and excellent properties – the best of both worlds!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eezPC™ Polycarbonate is an excellent choice for printing parts that would ordinarily fail when using standard materials such as PLA, PETG, or ABS. We consider this an excellent bridge in performance between these lower performance materials and higher priced materials such as Ultem or PEEK.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eBenefits of ezPC Include:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLow warp, high heat resistance, and excellent mechanical properties\u003c\/li\u003e\n\u003cli\u003eEase of use on a wide array of printers, no heated chamber needed!\u003c\/li\u003e\n\u003cli\u003eHigh thermal properties with a Tg of 118°C and HDT of 112°C\u003c\/li\u003e\n\u003cli\u003eSuperior thermal properties vs. PLA, PETG, ABS, and ASA\u003c\/li\u003e\n\u003cli\u003eNo odors or hazardous fumes while printing making it ideal for a home or office environment\u003c\/li\u003e\n\u003cli\u003ePerfect for functional end-use parts as well as prototypes\u003c\/li\u003e\n\u003cli\u003eExcellent adhesion to our \u003ca href=\"https:\/\/www.digitmakers.ca\/products\/aquatek-x1-advanced-universal-water-soluble-support-filament-1-75mm-500g-natural\"\u003eAquaTek™\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eX1 USM Water Soluble Support\u003c\/span\u003e \u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eProduct Data Sheet can be found \u003ca href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/04\/UN_ezPC_v01.pdf\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/04\/UN_ezPC_v01.pdf\"\u003e\u003cstrong\u003eHERE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSafety Data Sheet can be found \u003ca href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/04\/ezPC_SDS_v01.pdf\" data-mce-href=\"https:\/\/www.3dxtech.com\/wp-content\/uploads\/2021\/04\/ezPC_SDS_v01.pdf\"\u003e\u003cstrong\u003eHERE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDual Extrusion Printer:\u003c\/strong\u003e\u003cbr\u003eezPC™ Polycarbonate adheres very well to our X1 USM Water Soluble Support. This allows you to print complex engineering-grade applications with complex geometry and wash the supports away in warm water. \u003ca href=\"https:\/\/www.digitmakers.ca\/products\/aquatek-x1-advanced-universal-water-soluble-support-filament-1-75mm-500g-natural\"\u003eAquaTek™ X1\u003c\/a\u003e is bio-safe and can be disposed of in home or office waste disposal drains.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003ePrint settings:\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eExtruder Temp: \u003c\/strong\u003e255-275°C\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBed Temp: \u003c\/strong\u003e90-110°C\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint Speed:\u003c\/strong\u003e 40-60mm\/s\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHeated Chamber: \u003c\/strong\u003eNot required\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFan Speed:\u003c\/strong\u003e Not required\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNozzle Specs: \u003c\/strong\u003eNo special concerns\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBed Adhesion: \u003c\/strong\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/pages\/search-results-page?q=visionminer\" data-mce-href=\"https:\/\/www.digitmakers.ca\/pages\/search-results-page?q=visionminer\"\u003eNano Polymer Adhesive\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eLayer Height: \u003c\/strong\u003eNo special concerns\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDrying Specs: \u003c\/strong\u003e80°C for 4+ hours\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSupports: \u003c\/strong\u003eWorks best with X1 USM Water Soluble Support\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003ePlease note that this material absorbs moisture after opening from the package and may need to be dried for optimal printing. If drying is necessary, please dry at 80°C for a minimum of 4 hours.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e"}
CARBONX™ EZPC (POLYCARBONATE) - 1.75mm 750g

CARBONX™ EZPC (POLYCARBONATE) - 1.75mm 750g

$64.99 CAD

ezPC™ (Polycarbonate) is a premium Polycarbonate created for ease of printing on the widest array of 3D printers. ezPC™ prints like a dream while offering low warp, excellent mechanical properties, heat resistance, and outstanding impact resistance. Ease of printing and excellent properties – the best of both worlds! ezPC™ Polycarbonate is an ex...


More Info