PolySupport Removable Support Filament - Pearl White - 1.75mm

PolySupport™ is a material designed to overcome of the problems in a desktop FDM/FFF 3D . which is printing: support. PolySupport™ generates support structures that can be easily removed by hand.

PolySupport™ can be used with PLA , TPU and PolyMaker PC Materials

 works just like your regular 3D printing filaments and it is not sensetive to heat and moisture . 

PolySupport™ very easy to remove after printing so you don't have to worry about removing support printed with PLA same material as the printed parts , or dissolving the support in liquid to dissolve. 

 PolySupport™ can be used as an alternative to PLA ,as well as support for single extruder , or in dual extruder setup. 

\

PLA based material from Polymaker’s portfolio + +

PETG based material from Polymaker’s portfolio –

ABS based material from Polymaker’s portfolio –

PC based material from Polymaker’s portfolio +

PVB based material from Polymaker’s portfolio +

TPU based material from Polymaker’s portfolio +

Nylon based material from Polymaker’s portfolio – –

+ + support the model very well
+ generally support the model depending on its geometry
– generally doesn’t support the model depending on its geometry
– – do not support the model

Technical Specifications 

Nozzle Temperature:
220˚C – 230˚C

Printing Speed:
20mm/s – 40mm/s

Bed Temperature:
25˚C – 60˚C

Bed Surface:
Glass with glue, blue tape, BuilTak®

Cooling Fan:
ON

Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters