Your cart is empty
Looks like you haven't added anything to your cart yet
|
120ML | ||
|
50ML |
No More Warping With EXTREME LOCK
Optimal Adhesion - Ideal for exotic and standard materials ensuring stable prints.
Print with peace of mind - provides reliable bonding with no surprises.
Durable protection- shields the build plate from residue and damage.
Made in Canada
Application Steps
| Step | Action | Description |
|---|---|---|
| 1 | SHAKE THE PRODUCT | Shake the bottle well before use. |
| 2 | PREPARE THE SURFACE | Ensure it is clean and residue-free. |
| 3 | APPLY THE ADHESIVE | Gently squeeze the bottle to release the product, then spread a thin layer with a brush. Rinse the brush with water or isopropyl alcohol. |
| 4 | LET IT DRY | Wait a few minutes for optimal drying. |
| 5 | CALIBRATE THE FIRST LAYER | Adjust the height for a perfect application. |
| 6 | START PRINTING | The adhesive will keep your part securely in place. |
| 7 | REMOVE THE PART | Carefully detach the part after printing. |
| 8 | CLEAN THE BUILD PLATE | Use water or isopropyl alcohol to remove any residue. |
⚠️ For high-temperature filaments, we always recommend using a brim to help prevent any potential issues.
Compatibility Guide
Build Plate Compatibility
✅ Compatible with Xtreme Lock
- Build Plates
- Kapton Tape
- Flexible Plates
- Whambam
- PEI
- BuildTak™
- Fiberglass
- Carbon Fiber
- Garolite
- PCB FR4
- Borosilicate Glass
- Ceramic Glass
- And so much more!
Filament Compatibility
✅ Compatible with various materials
❌ Does not work with Polypropylene
Composites:
- Carbon Fiber Filled Filaments
- Glass Fiber Filled Filaments
- Stone Filled Filaments
- Glitter Filled Filaments
Material Compatibility
| Type | Compatible Materials |
|---|---|
| Ambient Temperature | PLA (Polylactic Acid), PETG (Polyethylene Terephthalate Glycol-Modified), SimuBone, HIPS (High Impact Polystyrene), ABS (Acrylonitrile Butadiene Styrene), ASA (Acrylonitrile Styrene Acrylate), PCTG (Polycyclohexylenedimethylene Terephthalate Glycol), TPU (Thermoplastic Polyurethane), PC/ABS (Polycarbonate/Acrylonitrile Butadiene Styrene), PVA (Polyvinyl Alcohol), TPE (Thermoplastic Elastomer), Flexible Filaments (e.g., Flex PLA) |
| High Temperature | PC (Polycarbonate), Nylon 6 (Polyamide 6), Nylon 12 (Polyamide 12), PPA (Polyphthalamide), PPE/PS (Polyphenylene Ether/Polystyrene), PVDF (Polyvinylidene Fluoride), PPS (Polyphenylene Sulfide), PSU (Polysulfone), PES (Polyethersulfone), PPSU (Polyphenylsulfone), PEEK (Polyether Ether Ketone), PEKK (Polyether Ketone Ketone), PEI (Polyetherimide), TPI (Thermoplastic Polyimide) |
Printing Guidelines
| Category | Guidelines |
|---|---|
| Low-Temperature Materials | Printing conditions: Below 300°C - Wait until the build plate has cooled before removing the part. - With materials like PLA or PETG, the part often releases on its own after cooling. - If it sticks: Apply a little water or isopropyl alcohol around the base to help with removal. - Ensure the first layer is perfectly calibrated. - If it’s too close, materials like ABS and PETG can cause chips or cracks on glass surfaces, even without adhesive. |
| High-Temperature Materials | Printing conditions: Above 300°C - Remove the part immediately after printing while the build plate and part are still hot. - Why? High-temperature materials contract very quickly when cooling, which can cause cracks on glass surfaces in less than 60 seconds. - Caution: Handle the part carefully to minimize stress from cooling. - Use durable print surfaces designed to withstand high-temperature materials to reduce the risk of cracking. |
⚠️ Important Warnings ⚠️
1️⃣ Verify that the surface is cold before application. Do not apply when it’s hot.
2️⃣ Avoid multiple applications on the same area with the applicator.
3️⃣ Ensure your first layer is perfect. If it's too close, you risk damaging the surface. With our adhesive, a very low Z adjustment is not necessary.
4️⃣ ABS adheres extremely well with our adhesive. Please apply a thin layer; otherwise, you may have difficulty removing it.
The Ultimate Adhesion Solution
- Ideal for PEEK, PEI, PEKK, and other high-temperature materials
- Effortless cleaning and easy reapplication
- Adapted for common materials like PLA, ABS, and PETG
- Durable formula for multiple prints without reapplication
- Prevents warping and ensures perfect adhesion
- Impeccable adhesion, without the mess of glue sticks or sprays
- Works on various surfaces: glass, carbon, PEI, etc.
- Made from safe, odor-free ingredients
Why Choose Xtreme Lock?
By choosing Xtreme Lock, you opt for a solution that combines performance, ease of use, and durability. Whether you are printing industrial prototypes, functional parts, or complex creations, this adhesive offers a smooth experience and results that meet your expectations. Transform your 3D printing projects with flawless adhesion, for successful prints every time.
No reviews yet.
- Choosing a selection results in a full page refresh.