Your cart is empty
Looks like you haven't added anything to your cart yet
D3D PLA Tough Refill - Bambu Lab Spool Compatible - 1.75mm 1kg - Various Colors
|
Black | ||
|
Blue | ||
|
Grey | ||
|
Red | ||
|
Silver | ||
|
White |
PLA Tough
BAMBU LAB REUSABLE SPOOL COMPATIBLE
Good Liquidity
A low shrinkage and not easy to wrap the edges. The Black PLA+ filament model comes out with excellent printing effect.
Good toughness
Made of high-quality raw materials, the filament has strong toughness and is not prone to brittleness and other problems. 
Wide Compatibility
PLA Tough filament 1.75mm works for most FDM 3D printers & 3D pens. It is compatible with the reusable spool for the Bambu Lab AMS.
High precision
Keep the stable tolerance in +/-0.02mm, no clogging and ensure the great 3D printing effect.
Environment friendly
All raw material are imported from Thailand and USA. Raw materials are high quality and 100% pure.
Parameter Information
Parameter Information
| Property | Unit | Test Standard | Typical value |
|---|---|---|---|
| Density | g/cm³ | ASTM D-792 | 1.22-1.23 |
| Melt finger(190℃, 2160g) | G/10min | ASTM D-1238 | 4.12 |
| Melting point | ℃ | DSC | 170-190 |
| Vicat softening point(A/120) | ℃ | ASTM D-648 | 55 |
| Tensile Strength | MPa | ASTM D-638 | 61 |
| Elongation at break | Break | ASTM D-638 | 22 |
| Bending strength | MPa | ASTM D-790 | 73 |
| Impact strength | kJ/M2 | ASTM D-256 | 8.8 |
| Water absorption | % | ASTM D-570 | <0.6 |
| printing temperature | ℃ | DSC | 200-220 |
Recommended for You
Browsing history
- Choosing a selection results in a full page refresh.