eSUN ePLA Matte Filament - 1.75mm 1kg

eSUN ePLA Matte Filament - 1.75mm 1kg - Digitmakers.ca
eSUN ePLA Matte Filament - 1.75mm 1kg - Digitmakers.ca
eSUN ePLA Matte Filament - 1.75mm 1kg - Digitmakers.ca
eSUN ePLA Matte Filament - 1.75mm 1kg - Digitmakers.ca
eSUN ePLA Matte Filament - 1.75mm 1kg - Digitmakers.ca
eSUN ePLA Matte Filament - 1.75mm 1kg - Digitmakers.ca
eSUN ePLA Matte Filament - 1.75mm 1kg - Digitmakers.ca
eSUN ePLA Matte Filament - 1.75mm 1kg - Digitmakers.ca
eSUN ePLA Matte Filament - 1.75mm 1kg - Digitmakers.ca
screen may slightly differ with real color
Color:
Almond Yellow

Product variant with selected options does not exist!

View all options as a list

Price
$24.99

Frequently Bought Together

In stock and ready for shipping

NOTE:

  • eSUN PLA+ is transitioning to cardboard spools. Depending on the stock level, you may receive plastic spools or cardboard spools. The high quality of the filaments remain the same. 
  • This filament requires printing in slow speed 40-50 mm/s and temperature at 205℃ -215℃ to achieve best results. Direct drive is preferred as the material is softer than regular PLA.

Introducing Matte PLA Filament by eSUN

ePLA-Matte is a cost-effective PLA material that is environmentally friendly and easy to print. ePLA-Matte has high rigidity and does not require an enclosure. It has low shrinkage, no warping or cracking, and is suitable for large-size model printing. The support is easy to peel from the surface with a  smooth and flat contact surface. There will be no irritating odor during printing, which is safe and environmentally friendly.

The spool is made by reusing injection moldings of PETG, ABS, PLA production waste and other industrial waste, and the outer box is made of recyclable paper. 

The matte surface is delicate and does not show layer lines. The filament is not easy breakable, which contributes to a smooth printing experience. It can be used for early concept models and rapid prototyping. Low density, ePLA-Matte single-roll consumables are 21% more than other matte PLA product print models. 

Note: ePLA-Matte lines are softer than other lines, so the extruder's tightness adjustment should not to be too tight, in case to affect printing.

Features:

  • Environmental friendly
  • Cost-effective
  • High-speed printing
  • Easy to peel off the support 
  • Excellent printability
  • Hard to break
  • Matte surface effect
  • Low density

 

 3D PRINTING FILAMENT

ePLA-Matte
Density(g/cm3) 1.174
Heat Distortion Temp(℃,0.45MPa) 51
5/10
Melt Flow Index(g/10min) 2.1(190℃/2.16kg)
Tensile Strength(MPa) 34.56
3/10
Elongation at Break(%) 56.1
5/10
Flexural Strength(MPa) 41.21
4/10
Flexural Modulus(MPa) 1119.41
2/10
IZOD Impact Strength(kJ/㎡) 33.15
7/10
Durability 4/10
Printability 9/10
Extruder Temperature(℃) 190 - 230℃
Recommended temperature 215℃
Bed temperature(℃) 45 - 60°C
Fan Speed 100%
Printing Speed 40 - 100mm/s
Heated Bed Optional
Recommended Build Surfaces Glass, PEI, BuildTak, Kapton


Recommended for You

Browsing history

Request a Quotation

Book a Demo