PolyDissolve S1 (1.75mm, 750g) Natural

PolyDissolve™ is a family of dissolvable support filaments. This family offers support solution for our portfolio of filaments. It enables a greater design freedom.

PolyDissolve™ S1 is a water dissolvable support for PLA, TPU, PVB and Nylon based filaments from our portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.

Nozzle Temperature:
215˚C – 225˚C

Printing Speed:
20mm/s – 40mm/s

Bed Temperature:
25˚C – 60˚C

Bed Surface:
Glass with glue, blue tape

Cooling Fan:
ON

Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters

Works With 

PLA based material from Polymaker’s portfolio + +

PETG based material from Polymaker’s portfolio +

ABS based material from Polymaker’s portfolio – –

PC based material from Polymaker’s portfolio – –

PVB based material from Polymaker’s portfolio + +

TPU based material from Polymaker’s portfolio + +

Nylon based material from Polymaker’s portfolio + +

+ + support the model very well
+ generally support the model depending on its geometry
– generally doesn’t support the model depending on its geometry
– – do not support the model

Drying Settings:
80˚C for 12h

Recommended Support Materials:
N/A

Other:
It is highly recommended to use the PolyBox™ when printing with PolyDissolve™ S1 and to store it in the resealable bag.

TDS:
DOWNLOAD

SDS:
DOWNLOAD