- Home
- Printdry
Printdry

PrintDry Filament Dryer PRO
$147.00
It’s the ultimate filament dryer you need for quality 3D printing! Outside Dimension: 340mm (L) x 285mm (W) x 350mm (H) Weight 8 lbs Digital Display Easily adjust the temperature with 5 presets (35ºC, 45ºC, 55ºC, 65ºC, and 75ºC). Built-in timer with a maximum time of 48 hours. Double-wall Structure Spool Adapter Included 2...

PrintDry Filament Dryer PRO3
$181.00
Easily adjust the temperature with 6 presets (35ºC, 45ºC, 55ºC, 65ºC, 75ºC, and 85ºC). Built-in timer with a maximum time of 48 hours. Note: The temperature readings are directly measured at the tip of the temperature sensor, located about 15 mm away from the hot air vent. The temperature distribution inside the dryer is NOT uniform. The temp...

PrintDry Filament Spool Holder (3-5Kg)
$36.00
Designed to provide smooth and consistent filament feeding for 3D Printing, especially for flexible filament. The Large Spool Holder can handle spools of up to 5kg filament. 5Kg eSUN spool holder will fit without the bushing, as show in the photo below. Using PrintDry's patent pending spool adapters, the filament spool is held securely on the h...

PrintDry Large Spool Kit (Double-wall) For Print Dry Filament Dryer Pro/Pro3
$31.00
Additional Chamber Kit (double-wall) for PrintDry Filament Dryer PRO/PRO3 Double-wall Used with the PrintDry Filament Dryer PRO3. To dry and feed two more additional spools with max 200mm or 8″ spool outside diameter. Note: Due to the stackable chamber design, you can use multiple additional chamber kits per dryer; however, the temperature and...

PrintDry Smart Vacuum Filament Container
$103.00
One-Touch Sealing & Auto Re-Sealing -- Smart Filament Storage Solution PrintDry is proud to announce our newest filament storage solution -- a SMART solution! With a built-in vacuum pump and a rechargeable battery, this filament container can be vacuum sealed by pushing ONE button. No more manual pumps. More importantly, we also integrate...

Printdry Vacuum Sealed Filament Container 5 Pack
$74.00
The ultimate filament storage solution for 3D printing. The water content in a filament can cause various 3D printing problems, from the print being partially failed to the filament completely unprintable. Leaving your filament spools unprotected will make it absorb moisture in the air and reduce its printability. This happens to almost all the ...