Taulman

Sort by:
Sale
T-Glase PETT-Clear-1.75mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services
T-Glase PETT-Clear-1.75mm

Filaments

$38.99 CAD $47.99 CAD
{"id":8058625291,"title":"T-Glase PETT-Clear-1.75mm","handle":"t-glass-pett-clear-1-75mm","description":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003eTaulman 3D \"T-Glase\" is an industrial high strength PETT material.\u003c\/p\u003e\n\u003cp\u003eT-Glase (or Tough Glass) (Tee-Glass) = was developed specifically by taulman3D to provide three major features to 3D Printing.  Low shrinkage, Higher strength than ABS and aesthetics beyond ABS and PLA due to it's enhanced optical properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePotential uses:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAs a replacement for any parts currently printed using ABS t-glase is 100% bonding layer to layer and parts will never \"split\" apart or \"de-laminate\" even in very large prints.\u003c\/li\u003e\n\u003cli\u003eGlass like qualities\u003c\/li\u003e\n\u003cli\u003eLight Pipe capable\u003c\/li\u003e\n\u003cli\u003eGlass clear when used with clear epoxies\u003c\/li\u003e\n\u003cli\u003eCrystal like reflections of the surface\u003c\/li\u003e\n\u003cli\u003eRed, Green, Blue and Black are translucent\u003c\/li\u003e\n\u003cli\u003eNow in Opaque White for a white that has a super gloss surface\u003c\/li\u003e\n\u003cli\u003e\"Non-shattering\" parts upon over-stress\u003c\/li\u003e\n\u003cli\u003eArchitectural Components\u003c\/li\u003e\n\u003cli\u003eJewelry\u003c\/li\u003e\n\u003cli\u003eGaming pc's\u003c\/li\u003e\n\u003cli\u003eLight catching designs of any type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTaulman t-glase is derived from the strongest PETT polymer combination available in the market. As t-glase is part of the Taulman3D family you can be sure that t-glase is a strong material! Where Taulman’s 618 and 645 nylons are somewhat bendable, t-glase is a fairly stiff material. When it comes to stiffness\/bend-ability, t-glase is more similar to ABS and PLA, rather than to Taulman’s 618 and 645 nylon filaments.\u003c\/p\u003e\n\u003cp\u003eT-Glase has excellent bridging features and has very little to zero warpage, which makes it an excellent material for printing large objects. Like Taulman 618 and 645, t-glase prints without any odors or fumes.\u003c\/p\u003e\n\u003cp\u003eTaulman t-glase is FDA approved, as t-glase is specifically made of FDA approved polymers for direct food contact\/containers.  This includes cups and other liquid storage parts as well as utensils\u003c\/p\u003e\n\u003cp\u003eT-glase is recyclable. While t-glase is not biodegradable like PLA, it is however 100% reclaimable in a compatible home filament extruder\/maker.\u003c\/p\u003e\n\u003cp\u003eTaulman3D t-glase’s clarity supports industry’s requirements for non-destructive evaluation of 3D Printed parts\u003c\/p\u003e\n\u003cp\u003eT-glase’s very low shrinkage makes printing large flat surfaces a breeze.  And it easily prints to acrylic, glass, Kapton and other platforms\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\"\u003e\u003cimg class=\"size-full wp-image-6634\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\" alt=\"tualman-material-selections\" width=\"834\" height=\"672\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003etualman-material-selections\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\u003ca href=\"http:\/\/taulman3d.com\/t-glase-optics.html\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #2a2a2a; font-size: xx-large;\"\u003eHacking t-glase to look more like glass!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"15%\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-filament-Weight_icon.png?10482698017282975306\" alt=\"3d filament net weight\" data-pin-nopin=\"true\"\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG (1.1 LB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-printing-temperature-guideline_pico.jpg?17244370916201715492\" alt=\"3d printing temperature guideline\"\u003e Printing\u003cbr\u003e Temperature:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e238°C - 245°C\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eWill print down to 230C and up to about 248C\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eT-glase prints easily to acrylic, glass, Kapton and other platforms\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNozzle = any size\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003ePrint speed = ABS speeds - slower for high detailed prints\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eRetraction = .5mm\/.1mm nozzle or for a .5mm nozzle = 2.5mm\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003ePrint bed = Glass heated to 45C with coat of PVA\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNOTE:  It is best \"NOT\" to let the bed cool to ambient, but only down to 35C in end of g-code, This will reduce glass breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003c\/div\u003e","published_at":"2019-09-06T16:53:22-04:00","created_at":"2017-01-29T12:28:29-05:00","vendor":"Taulman","type":"Filaments","tags":["1.75 mm","1.75mm","3D Printer Filament","ASA\/PET 1.75 mm","Clear","CoPolymer","Filament","Natural","PETT","PLA","t-glase","T-Glass","Taulman","woo_import_1"],"price":3899,"price_min":3899,"price_max":3899,"available":true,"price_varies":false,"compare_at_price":4799,"compare_at_price_min":4799,"compare_at_price_max":4799,"compare_at_price_varies":false,"variants":[{"id":26393931019,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TAUL-FL-PETT-TGLASE-1.75MM-CLR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"T-Glase PETT-Clear-1.75mm","public_title":null,"options":["Default Title"],"price":3899,"weight":2000,"compare_at_price":4799,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"688295584094","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/tglase-clear.png?v=1598471183"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/tglase-clear.png?v=1598471183","options":["Title"],"media":[{"alt":"T-Glase PETT-Clear-1.75mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":94742741028,"position":1,"preview_image":{"aspect_ratio":1.709,"height":468,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/tglase-clear.png?v=1568829411"},"aspect_ratio":1.709,"height":468,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/tglase-clear.png?v=1568829411","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003eTaulman 3D \"T-Glase\" is an industrial high strength PETT material.\u003c\/p\u003e\n\u003cp\u003eT-Glase (or Tough Glass) (Tee-Glass) = was developed specifically by taulman3D to provide three major features to 3D Printing.  Low shrinkage, Higher strength than ABS and aesthetics beyond ABS and PLA due to it's enhanced optical properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePotential uses:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAs a replacement for any parts currently printed using ABS t-glase is 100% bonding layer to layer and parts will never \"split\" apart or \"de-laminate\" even in very large prints.\u003c\/li\u003e\n\u003cli\u003eGlass like qualities\u003c\/li\u003e\n\u003cli\u003eLight Pipe capable\u003c\/li\u003e\n\u003cli\u003eGlass clear when used with clear epoxies\u003c\/li\u003e\n\u003cli\u003eCrystal like reflections of the surface\u003c\/li\u003e\n\u003cli\u003eRed, Green, Blue and Black are translucent\u003c\/li\u003e\n\u003cli\u003eNow in Opaque White for a white that has a super gloss surface\u003c\/li\u003e\n\u003cli\u003e\"Non-shattering\" parts upon over-stress\u003c\/li\u003e\n\u003cli\u003eArchitectural Components\u003c\/li\u003e\n\u003cli\u003eJewelry\u003c\/li\u003e\n\u003cli\u003eGaming pc's\u003c\/li\u003e\n\u003cli\u003eLight catching designs of any type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTaulman t-glase is derived from the strongest PETT polymer combination available in the market. As t-glase is part of the Taulman3D family you can be sure that t-glase is a strong material! Where Taulman’s 618 and 645 nylons are somewhat bendable, t-glase is a fairly stiff material. When it comes to stiffness\/bend-ability, t-glase is more similar to ABS and PLA, rather than to Taulman’s 618 and 645 nylon filaments.\u003c\/p\u003e\n\u003cp\u003eT-Glase has excellent bridging features and has very little to zero warpage, which makes it an excellent material for printing large objects. Like Taulman 618 and 645, t-glase prints without any odors or fumes.\u003c\/p\u003e\n\u003cp\u003eTaulman t-glase is FDA approved, as t-glase is specifically made of FDA approved polymers for direct food contact\/containers.  This includes cups and other liquid storage parts as well as utensils\u003c\/p\u003e\n\u003cp\u003eT-glase is recyclable. While t-glase is not biodegradable like PLA, it is however 100% reclaimable in a compatible home filament extruder\/maker.\u003c\/p\u003e\n\u003cp\u003eTaulman3D t-glase’s clarity supports industry’s requirements for non-destructive evaluation of 3D Printed parts\u003c\/p\u003e\n\u003cp\u003eT-glase’s very low shrinkage makes printing large flat surfaces a breeze.  And it easily prints to acrylic, glass, Kapton and other platforms\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\"\u003e\u003cimg class=\"size-full wp-image-6634\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\" alt=\"tualman-material-selections\" width=\"834\" height=\"672\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003etualman-material-selections\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\u003ca href=\"http:\/\/taulman3d.com\/t-glase-optics.html\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #2a2a2a; font-size: xx-large;\"\u003eHacking t-glase to look more like glass!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"15%\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-filament-Weight_icon.png?10482698017282975306\" alt=\"3d filament net weight\" data-pin-nopin=\"true\"\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG (1.1 LB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-printing-temperature-guideline_pico.jpg?17244370916201715492\" alt=\"3d printing temperature guideline\"\u003e Printing\u003cbr\u003e Temperature:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e238°C - 245°C\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eWill print down to 230C and up to about 248C\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eT-glase prints easily to acrylic, glass, Kapton and other platforms\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNozzle = any size\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003ePrint speed = ABS speeds - slower for high detailed prints\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eRetraction = .5mm\/.1mm nozzle or for a .5mm nozzle = 2.5mm\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003ePrint bed = Glass heated to 45C with coat of PVA\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNOTE:  It is best \"NOT\" to let the bed cool to ambient, but only down to 35C in end of g-code, This will reduce glass breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003c\/div\u003e"}
T-Glase PETT-Clear-1.75mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

T-Glase PETT-Clear-1.75mm

$38.99 CAD

Taulman 3D "T-Glase" is an industrial high strength PETT material. T-Glase (or Tough Glass) (Tee-Glass) = was developed specifically by taulman3D to provide three major features to 3D Printing.  Low shrinkage, Higher strength than ABS and aesthetics beyond ABS and PLA due to it's enhanced optical properties. Potential uses: As a replacement fo...


More Info
Sale
Taulman Alloy 910 Natural 1.75mm 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services
Taulman Alloy 910 Natural 1.75mm 1lb

Filaments

$39.99 CAD $48.00 CAD
{"id":8058625995,"title":"Taulman Alloy 910 Natural 1.75mm 1lb","handle":"alloy-910-clear-1-75mm","description":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eAlloy 910 is a substantial advancement in 3D Printing materials technology from taulman3D. Designed to be extremely strong without any composite fillers, for use in high temperature and high durability applications such as industrial parts and robotics. It is a high quality filament designed to be easy to print with.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eWith a combined tensile strength higher than the strongest co-polyesters, the durability of Nylons, a shrinkage factor that rivals the t-glase, a vast range of chemical resistance and a 95C working range, you now have one solution easily printable at 245C.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e:  Alloy 910 is the only Nylon based polymer that makes support removal easier than most using ABS!\u003c\/p\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e8,100 Tensile Strength\u003c\/li\u003e\n\u003cli\u003e32% Elongation\u003c\/li\u003e\n\u003cli\u003eFDA CFR177.1500\u003c\/li\u003e\n\u003cli\u003eSuper low shrinkage\u003c\/li\u003e\n\u003cli\u003eEasy support removal\u003c\/li\u003e\n\u003cli\u003eChemicals resistance of Nylons\u003c\/li\u003e\n\u003cli\u003ePrinting Temp.:\u003cspan style=\"text-align: center; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; float: none; display: inline !important; white-space: normal; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e250°C - 255°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle = any size\u003c\/li\u003e\n\u003cli\u003ePrint speed = ABS speeds\u003c\/li\u003e\n\u003cli\u003eRetraction = 1mm\/.1mm nozzle or for a .5mm nozzle = 5mm\u003c\/li\u003e\n\u003cli\u003ePrint bed = Glass heated to 45C with coat of PVA. Can be printed without a heated bed on a sheet of BuildTak with a coat of PVA.\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"product-description rte\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-29T12:28:34-05:00","created_at":"2017-01-29T12:28:34-05:00","vendor":"Taulman","type":"Filaments","tags":["1.75mm","3D Printer Filament","Alloy910","Filament","Nylon","Nylon 1.75 mm","Taulman"],"price":3999,"price_min":3999,"price_max":3999,"available":true,"price_varies":false,"compare_at_price":4800,"compare_at_price_min":4800,"compare_at_price_max":4800,"compare_at_price_varies":false,"variants":[{"id":26393931723,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TAUL-FL-ALY910-1.75MM-NTRL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taulman Alloy 910 Natural 1.75mm 1lb","public_title":null,"options":["Default Title"],"price":3999,"weight":2000,"compare_at_price":4800,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"688295584292","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-910-natural-1.75mm-1lb.png?v=1594464431"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-910-natural-1.75mm-1lb.png?v=1594464431","options":["Title"],"media":[{"alt":"Taulman Alloy 910 Natural 1.75mm 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":94742872100,"position":1,"preview_image":{"aspect_ratio":0.99,"height":197,"width":195,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-910-natural-1.75mm-1lb.png?v=1568829411"},"aspect_ratio":0.99,"height":197,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-910-natural-1.75mm-1lb.png?v=1568829411","width":195}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eAlloy 910 is a substantial advancement in 3D Printing materials technology from taulman3D. Designed to be extremely strong without any composite fillers, for use in high temperature and high durability applications such as industrial parts and robotics. It is a high quality filament designed to be easy to print with.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eWith a combined tensile strength higher than the strongest co-polyesters, the durability of Nylons, a shrinkage factor that rivals the t-glase, a vast range of chemical resistance and a 95C working range, you now have one solution easily printable at 245C.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e:  Alloy 910 is the only Nylon based polymer that makes support removal easier than most using ABS!\u003c\/p\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e8,100 Tensile Strength\u003c\/li\u003e\n\u003cli\u003e32% Elongation\u003c\/li\u003e\n\u003cli\u003eFDA CFR177.1500\u003c\/li\u003e\n\u003cli\u003eSuper low shrinkage\u003c\/li\u003e\n\u003cli\u003eEasy support removal\u003c\/li\u003e\n\u003cli\u003eChemicals resistance of Nylons\u003c\/li\u003e\n\u003cli\u003ePrinting Temp.:\u003cspan style=\"text-align: center; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; float: none; display: inline !important; white-space: normal; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e250°C - 255°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle = any size\u003c\/li\u003e\n\u003cli\u003ePrint speed = ABS speeds\u003c\/li\u003e\n\u003cli\u003eRetraction = 1mm\/.1mm nozzle or for a .5mm nozzle = 5mm\u003c\/li\u003e\n\u003cli\u003ePrint bed = Glass heated to 45C with coat of PVA. Can be printed without a heated bed on a sheet of BuildTak with a coat of PVA.\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"product-description rte\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}
Taulman Alloy 910 Natural 1.75mm 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

Taulman Alloy 910 Natural 1.75mm 1lb

$39.99 CAD

Alloy 910 is a substantial advancement in 3D Printing materials technology from taulman3D. Designed to be extremely strong without any composite fillers, for use in high temperature and high durability applications such as industrial parts and robotics. It is a high quality filament designed to be easy to print with. With a combined tensile st...


More Info
Sale
Taulman Alloy 910-Black- 2.85mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services
Taulman Alloy 910-Black- 2.85mm

Filaments

$39.99 CAD $48.00 CAD
{"id":9286683851,"title":"Taulman Alloy 910-Black- 2.85mm","handle":"alloy-910-black-2-85mm","description":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eAlloy 910 is a substantial advancement in 3D Printing materials technology from taulman3D. Designed to be extremely strong without any composite fillers, for use in high temperature and high durability applications such as industrial parts and robotics. It is a high quality filament designed to be easy to print with.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eWith a combined tensile strength higher than the strongest co-polyesters, the durability of Nylons, a shrinkage factor that rivals the t-glase, a vast range of chemical resistance and a 95C working range, you now have one solution easily printable at 245C.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e:  Alloy 910 is the only Nylon based polymer that makes support removal easier than most using ABS!\u003c\/p\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cstyle id=\"mceDefaultStyles\" type=\"text\/css\"\u003e\u003c!--\n.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;width: 100px;height: 100px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\nbody {min-height: 150px}\n.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cscript id=\"mce_1\" src=\"https:\/\/digitmakers.ca\/wp-includes\/js\/tinymce\/plugins\/wpembed\/..\/..\/..\/wp-embed.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e8,100 Tensile Strength\u003c\/li\u003e\n\u003cli\u003e32% Elongation\u003c\/li\u003e\n\u003cli\u003eFDA CFR177.1500\u003c\/li\u003e\n\u003cli\u003eSuper low shrinkage\u003c\/li\u003e\n\u003cli\u003eEasy support removal\u003c\/li\u003e\n\u003cli\u003eChemicals resistance of Nylons\u003c\/li\u003e\n\u003cli\u003ePrinting Temp.:\u003cspan style=\"text-align: center; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; float: none; display: inline !important; white-space: normal; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e250°C - 255°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle = any size\u003c\/li\u003e\n\u003cli\u003ePrint speed = ABS speeds\u003c\/li\u003e\n\u003cli\u003eRetraction = 1mm\/.1mm nozzle or for a .5mm nozzle = 5mm\u003c\/li\u003e\n\u003cli\u003ePrint bed = Glass heated to 45C with coat of PVA. Can be printed without a heated bed on a sheet of BuildTak with a coat of PVA.\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"attachment_6634\" class=\"wp-caption alignleft\" style=\"width: 844px;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-29T12:28:33-05:00","created_at":"2017-06-28T11:17:11-04:00","vendor":"Taulman","type":"Filaments","tags":["2.85","2.85mm","230","3D Printer Filament","3mm","Alloy910","Filament","Nylon","Nylon 3 mm \/ 2.85 mm","Taulman"],"price":3999,"price_min":3999,"price_max":3999,"available":true,"price_varies":false,"compare_at_price":4800,"compare_at_price_min":4800,"compare_at_price_max":4800,"compare_at_price_varies":false,"variants":[{"id":33414384331,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FL0012-Alloy910-Black-2.85mm","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taulman Alloy 910-Black- 2.85mm","public_title":null,"options":["Default Title"],"price":3999,"weight":1000,"compare_at_price":4800,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"688295584957","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Alloy_910_Black_4d676fe4-4942-491d-a2a7-4e3d54c126a6.png?v=1594464490"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Alloy_910_Black_4d676fe4-4942-491d-a2a7-4e3d54c126a6.png?v=1594464490","options":["Title"],"media":[{"alt":"Taulman Alloy 910-Black- 2.85mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":262556221571,"position":1,"preview_image":{"aspect_ratio":1.01,"height":204,"width":206,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Alloy_910_Black_4d676fe4-4942-491d-a2a7-4e3d54c126a6.png?v=1568961387"},"aspect_ratio":1.01,"height":204,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Alloy_910_Black_4d676fe4-4942-491d-a2a7-4e3d54c126a6.png?v=1568961387","width":206}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eAlloy 910 is a substantial advancement in 3D Printing materials technology from taulman3D. Designed to be extremely strong without any composite fillers, for use in high temperature and high durability applications such as industrial parts and robotics. It is a high quality filament designed to be easy to print with.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eWith a combined tensile strength higher than the strongest co-polyesters, the durability of Nylons, a shrinkage factor that rivals the t-glase, a vast range of chemical resistance and a 95C working range, you now have one solution easily printable at 245C.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e:  Alloy 910 is the only Nylon based polymer that makes support removal easier than most using ABS!\u003c\/p\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cstyle id=\"mceDefaultStyles\" type=\"text\/css\"\u003e\u003c!--\n.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;width: 100px;height: 100px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\nbody {min-height: 150px}\n.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cscript id=\"mce_1\" src=\"https:\/\/digitmakers.ca\/wp-includes\/js\/tinymce\/plugins\/wpembed\/..\/..\/..\/wp-embed.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e8,100 Tensile Strength\u003c\/li\u003e\n\u003cli\u003e32% Elongation\u003c\/li\u003e\n\u003cli\u003eFDA CFR177.1500\u003c\/li\u003e\n\u003cli\u003eSuper low shrinkage\u003c\/li\u003e\n\u003cli\u003eEasy support removal\u003c\/li\u003e\n\u003cli\u003eChemicals resistance of Nylons\u003c\/li\u003e\n\u003cli\u003ePrinting Temp.:\u003cspan style=\"text-align: center; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; float: none; display: inline !important; white-space: normal; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e250°C - 255°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle = any size\u003c\/li\u003e\n\u003cli\u003ePrint speed = ABS speeds\u003c\/li\u003e\n\u003cli\u003eRetraction = 1mm\/.1mm nozzle or for a .5mm nozzle = 5mm\u003c\/li\u003e\n\u003cli\u003ePrint bed = Glass heated to 45C with coat of PVA. Can be printed without a heated bed on a sheet of BuildTak with a coat of PVA.\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"attachment_6634\" class=\"wp-caption alignleft\" style=\"width: 844px;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Taulman Alloy 910-Black- 2.85mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

Taulman Alloy 910-Black- 2.85mm

$39.99 CAD

Alloy 910 is a substantial advancement in 3D Printing materials technology from taulman3D. Designed to be extremely strong without any composite fillers, for use in high temperature and high durability applications such as industrial parts and robotics. It is a high quality filament designed to be easy to print with. With a combined tensile s...


More Info
Sale
Taulman Alloy 910-Black-1.75mm 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services
Taulman Alloy 910-Black-1.75mm 1lb

Filaments

$39.99 CAD $48.00 CAD
{"id":9286619019,"title":"Taulman Alloy 910-Black-1.75mm 1lb","handle":"alloy-910-black-1-75mm","description":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eAlloy 910 is a substantial advancement in 3D Printing materials technology from taulman3D. Designed to be extremely strong without any composite fillers, for use in high temperature and high durability applications such as industrial parts and robotics. It is a high quality filament designed to be easy to print with.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eWith a combined tensile strength higher than the strongest co-polyesters, the durability of Nylons, a shrinkage factor that rivals the t-glase, a vast range of chemical resistance and a 95C working range, you now have one solution easily printable at 245C.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e:  Alloy 910 is the only Nylon based polymer that makes support removal easier than most using ABS!\u003c\/p\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e8,100 Tensile Strength\u003c\/li\u003e\n\u003cli\u003e32% Elongation\u003c\/li\u003e\n\u003cli\u003eFDA CFR177.1500\u003c\/li\u003e\n\u003cli\u003eSuper low shrinkage\u003c\/li\u003e\n\u003cli\u003eEasy support removal\u003c\/li\u003e\n\u003cli\u003eChemicals resistance of Nylons\u003c\/li\u003e\n\u003cli\u003ePrinting Temp.:\u003cspan style=\"text-align: center; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; float: none; display: inline !important; white-space: normal; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e250°C - 255°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle = any size\u003c\/li\u003e\n\u003cli\u003ePrint speed = ABS speeds\u003c\/li\u003e\n\u003cli\u003eRetraction = 1mm\/.1mm nozzle or for a .5mm nozzle = 5mm\u003c\/li\u003e\n\u003cli\u003ePrint bed = Glass heated to 45C with coat of PVA. Can be printed without a heated bed on a sheet of BuildTak with a coat of PVA.\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"attachment_6634\" class=\"wp-caption alignleft\" style=\"width: 844px;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"product-description rte\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-29T12:28:34-05:00","created_at":"2017-06-28T11:12:07-04:00","vendor":"Taulman","type":"Filaments","tags":["1.75mm","3D Printer Filament","Alloy910","Balck","Filament","Nylon","Nylon 1.75 mm","Taulman"],"price":3999,"price_min":3999,"price_max":3999,"available":true,"price_varies":false,"compare_at_price":4800,"compare_at_price_min":4800,"compare_at_price_max":4800,"compare_at_price_varies":false,"variants":[{"id":33414160907,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TAUL-FL-ALY910-1.75MM-BLK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taulman Alloy 910-Black-1.75mm 1lb","public_title":null,"options":["Default Title"],"price":3999,"weight":1500,"compare_at_price":4800,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":"688295584940","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Alloy_910_Black.png?v=1594464489"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Alloy_910_Black.png?v=1594464489","options":["Title"],"media":[{"alt":"Taulman Alloy 910-Black-1.75mm 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":262556188803,"position":1,"preview_image":{"aspect_ratio":1.01,"height":204,"width":206,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Alloy_910_Black.png?v=1568961387"},"aspect_ratio":1.01,"height":204,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Alloy_910_Black.png?v=1568961387","width":206}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eAlloy 910 is a substantial advancement in 3D Printing materials technology from taulman3D. Designed to be extremely strong without any composite fillers, for use in high temperature and high durability applications such as industrial parts and robotics. It is a high quality filament designed to be easy to print with.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eWith a combined tensile strength higher than the strongest co-polyesters, the durability of Nylons, a shrinkage factor that rivals the t-glase, a vast range of chemical resistance and a 95C working range, you now have one solution easily printable at 245C.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e:  Alloy 910 is the only Nylon based polymer that makes support removal easier than most using ABS!\u003c\/p\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e8,100 Tensile Strength\u003c\/li\u003e\n\u003cli\u003e32% Elongation\u003c\/li\u003e\n\u003cli\u003eFDA CFR177.1500\u003c\/li\u003e\n\u003cli\u003eSuper low shrinkage\u003c\/li\u003e\n\u003cli\u003eEasy support removal\u003c\/li\u003e\n\u003cli\u003eChemicals resistance of Nylons\u003c\/li\u003e\n\u003cli\u003ePrinting Temp.:\u003cspan style=\"text-align: center; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; float: none; display: inline !important; white-space: normal; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e250°C - 255°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle = any size\u003c\/li\u003e\n\u003cli\u003ePrint speed = ABS speeds\u003c\/li\u003e\n\u003cli\u003eRetraction = 1mm\/.1mm nozzle or for a .5mm nozzle = 5mm\u003c\/li\u003e\n\u003cli\u003ePrint bed = Glass heated to 45C with coat of PVA. Can be printed without a heated bed on a sheet of BuildTak with a coat of PVA.\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"attachment_6634\" class=\"wp-caption alignleft\" style=\"width: 844px;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"product-description rte\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}
Taulman Alloy 910-Black-1.75mm 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

Taulman Alloy 910-Black-1.75mm 1lb

$39.99 CAD

Alloy 910 is a substantial advancement in 3D Printing materials technology from taulman3D. Designed to be extremely strong without any composite fillers, for use in high temperature and high durability applications such as industrial parts and robotics. It is a high quality filament designed to be easy to print with. With a combined tensile st...


More Info
Sale
Taulman Alloy 910-Clear- 2.85mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services
Taulman Alloy 910-Clear- 2.85mm

Filaments

$39.99 CAD $48.00 CAD
{"id":8058625739,"title":"Taulman Alloy 910-Clear- 2.85mm","handle":"alloy-910-clear-2-85mm","description":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eAlloy 910 is a substantial advancement in 3D Printing materials technology from taulman3D. Designed to be extremely strong without any composite fillers, for use in high temperature and high durability applications such as industrial parts and robotics. It is a high quality filament designed to be easy to print with.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eWith a combined tensile strength higher than the strongest co-polyesters, the durability of Nylons, a shrinkage factor that rivals the t-glase, a vast range of chemical resistance and a 95C working range, you now have one solution easily printable at 245C.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e:  Alloy 910 is the only Nylon based polymer that makes support removal easier than most using ABS!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cstyle id=\"mceDefaultStyles\" type=\"text\/css\"\u003e\u003c!--\n.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;width: 100px;height: 100px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\nbody {min-height: 150px}\n.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e\n p {\n margin-top: 0;\n }\n\n html, body {\n cursor: text;\n }\n\n body {\n font-family: \"Helvetica Neue\", Helvetica, Arial, sans-serif;\n font-size: 15px;\n line-height: 1.5;\n }\n\n h1, h2, h3, h4, h5, h6, p {\n margin: 0 0 1em 0;\n line-height: 1.4;\n }\n\n table {\n width: 100%;\n }\n\n table, td, th {\n border: 1px dashed #CCC;\n }\n\n.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\n\u003cscript id=\"mce_1\" src=\"https:\/\/digitmakers.ca\/wp-includes\/js\/tinymce\/plugins\/wpembed\/..\/..\/..\/wp-embed.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e\n\u003c\/p\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e8,100 Tensile Strength\u003c\/li\u003e\n\u003cli\u003e32% Elongation\u003c\/li\u003e\n\u003cli\u003eFDA CFR177.1500\u003c\/li\u003e\n\u003cli\u003eSuper low shrinkage\u003c\/li\u003e\n\u003cli\u003eEasy support removal\u003c\/li\u003e\n\u003cli\u003eChemicals resistance of Nylons\u003c\/li\u003e\n\u003cli\u003ePrinting Temp.:\u003cspan style=\"text-align: center; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; float: none; display: inline !important; white-space: normal; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e250°C - 255°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle = any size\u003c\/li\u003e\n\u003cli\u003ePrint speed = ABS speeds\u003c\/li\u003e\n\u003cli\u003eRetraction = 1mm\/.1mm nozzle or for a .5mm nozzle = 5mm\u003c\/li\u003e\n\u003cli\u003ePrint bed = Glass heated to 45C with coat of PVA. Can be printed without a heated bed on a sheet of BuildTak with a coat of PVA.\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-29T12:28:33-05:00","created_at":"2017-01-29T12:28:33-05:00","vendor":"Taulman","type":"Filaments","tags":["2.85","2.85mm","230","3D Printer Filament","3mm","Alloy910","Filament","Nylon","Nylon 3 mm \/ 2.85 mm","Taulman"],"price":3999,"price_min":3999,"price_max":3999,"available":true,"price_varies":false,"compare_at_price":4800,"compare_at_price_min":4800,"compare_at_price_max":4800,"compare_at_price_varies":false,"variants":[{"id":26393931467,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FL0012-Alloy910-2.85mm","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taulman Alloy 910-Clear- 2.85mm","public_title":null,"options":["Default Title"],"price":3999,"weight":1000,"compare_at_price":4800,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001194","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-3d-printing-alloy-910.jpg?v=1594464430"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-3d-printing-alloy-910.jpg?v=1594464430","options":["Title"],"media":[{"alt":"Taulman Alloy 910-Clear- 2.85mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":94742839332,"position":1,"preview_image":{"aspect_ratio":1.141,"height":555,"width":633,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-3d-printing-alloy-910.jpg?v=1568829411"},"aspect_ratio":1.141,"height":555,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-3d-printing-alloy-910.jpg?v=1568829411","width":633}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eAlloy 910 is a substantial advancement in 3D Printing materials technology from taulman3D. Designed to be extremely strong without any composite fillers, for use in high temperature and high durability applications such as industrial parts and robotics. It is a high quality filament designed to be easy to print with.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eWith a combined tensile strength higher than the strongest co-polyesters, the durability of Nylons, a shrinkage factor that rivals the t-glase, a vast range of chemical resistance and a 95C working range, you now have one solution easily printable at 245C.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e:  Alloy 910 is the only Nylon based polymer that makes support removal easier than most using ABS!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cstyle id=\"mceDefaultStyles\" type=\"text\/css\"\u003e\u003c!--\n.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;width: 100px;height: 100px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\nbody {min-height: 150px}\n.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e\n p {\n margin-top: 0;\n }\n\n html, body {\n cursor: text;\n }\n\n body {\n font-family: \"Helvetica Neue\", Helvetica, Arial, sans-serif;\n font-size: 15px;\n line-height: 1.5;\n }\n\n h1, h2, h3, h4, h5, h6, p {\n margin: 0 0 1em 0;\n line-height: 1.4;\n }\n\n table {\n width: 100%;\n }\n\n table, td, th {\n border: 1px dashed #CCC;\n }\n\n.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\n\u003cscript id=\"mce_1\" src=\"https:\/\/digitmakers.ca\/wp-includes\/js\/tinymce\/plugins\/wpembed\/..\/..\/..\/wp-embed.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e\n\u003c\/p\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e8,100 Tensile Strength\u003c\/li\u003e\n\u003cli\u003e32% Elongation\u003c\/li\u003e\n\u003cli\u003eFDA CFR177.1500\u003c\/li\u003e\n\u003cli\u003eSuper low shrinkage\u003c\/li\u003e\n\u003cli\u003eEasy support removal\u003c\/li\u003e\n\u003cli\u003eChemicals resistance of Nylons\u003c\/li\u003e\n\u003cli\u003ePrinting Temp.:\u003cspan style=\"text-align: center; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; float: none; display: inline !important; white-space: normal; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e250°C - 255°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle = any size\u003c\/li\u003e\n\u003cli\u003ePrint speed = ABS speeds\u003c\/li\u003e\n\u003cli\u003eRetraction = 1mm\/.1mm nozzle or for a .5mm nozzle = 5mm\u003c\/li\u003e\n\u003cli\u003ePrint bed = Glass heated to 45C with coat of PVA. Can be printed without a heated bed on a sheet of BuildTak with a coat of PVA.\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Taulman Alloy 910-Clear- 2.85mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

Taulman Alloy 910-Clear- 2.85mm

$39.99 CAD

Alloy 910 is a substantial advancement in 3D Printing materials technology from taulman3D. Designed to be extremely strong without any composite fillers, for use in high temperature and high durability applications such as industrial parts and robotics. It is a high quality filament designed to be easy to print with. With a combined tensile s...


More Info
Sold Out
Taulman Alloy 910-Natural- 2.85mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services
Taulman Alloy 910-Natural- 2.85mm

Filaments

$39.99 CAD
{"id":1597631987748,"title":"Taulman Alloy 910-Natural- 2.85mm","handle":"taulman-alloy-910-natural-2-85mm","description":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eAlloy 910 is a substantial advancement in 3D Printing materials technology from taulman3D. Designed to be extremely strong without any composite fillers, for use in high temperature and high durability applications such as industrial parts and robotics. It is a high quality filament designed to be easy to print with.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eWith a combined tensile strength higher than the strongest co-polyesters, the durability of Nylons, a shrinkage factor that rivals the t-glase, a vast range of chemical resistance and a 95C working range, you now have one solution easily printable at 245C.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e:  Alloy 910 is the only Nylon based polymer that makes support removal easier than most using ABS!\u003c\/p\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cstyle id=\"mceDefaultStyles\" type=\"text\/css\"\u003e\u003c!--\n.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;width: 100px;height: 100px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\nbody {min-height: 150px}\n.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cscript id=\"mce_1\" src=\"https:\/\/digitmakers.ca\/wp-includes\/js\/tinymce\/plugins\/wpembed\/..\/..\/..\/wp-embed.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e8,100 Tensile Strength\u003c\/li\u003e\n\u003cli\u003e32% Elongation\u003c\/li\u003e\n\u003cli\u003eFDA CFR177.1500\u003c\/li\u003e\n\u003cli\u003eSuper low shrinkage\u003c\/li\u003e\n\u003cli\u003eEasy support removal\u003c\/li\u003e\n\u003cli\u003eChemicals resistance of Nylons\u003c\/li\u003e\n\u003cli\u003ePrinting Temp.:\u003cspan style=\"text-align: center; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; float: none; display: inline !important; white-space: normal; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e250°C - 255°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle = any size\u003c\/li\u003e\n\u003cli\u003ePrint speed = ABS speeds\u003c\/li\u003e\n\u003cli\u003eRetraction = 1mm\/.1mm nozzle or for a .5mm nozzle = 5mm\u003c\/li\u003e\n\u003cli\u003ePrint bed = Glass heated to 45C with coat of PVA. Can be printed without a heated bed on a sheet of BuildTak with a coat of PVA.\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"attachment_6634\" class=\"wp-caption alignleft\" style=\"width: 844px;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-09-09T15:53:35-04:00","created_at":"2019-09-09T15:53:35-04:00","vendor":"Taulman","type":"Filaments","tags":["2.85","2.85mm","3D Printer Filament","3mm","Alloy910","Filament","Natural","Nylon","Nylon 3 mm \/ 2.85 mm","Taulman"],"price":3999,"price_min":3999,"price_max":3999,"available":false,"price_varies":false,"compare_at_price":4800,"compare_at_price_min":4800,"compare_at_price_max":4800,"compare_at_price_varies":false,"variants":[{"id":12274968166436,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FL0012-Alloy910-Natural-2.85mm","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Taulman Alloy 910-Natural- 2.85mm","public_title":null,"options":["Default Title"],"price":3999,"weight":1000,"compare_at_price":4800,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"688295584308","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Alloy_910_Black_8c89ec60-5895-4432-a6cf-2629ded387ce.png?v=1594465831"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Alloy_910_Black_8c89ec60-5895-4432-a6cf-2629ded387ce.png?v=1594465831","options":["Title"],"media":[{"alt":"Taulman Alloy 910-Natural- 2.85mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":1962527654019,"position":1,"preview_image":{"aspect_ratio":1.01,"height":204,"width":206,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Alloy_910_Black_8c89ec60-5895-4432-a6cf-2629ded387ce.png?v=1569345643"},"aspect_ratio":1.01,"height":204,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Alloy_910_Black_8c89ec60-5895-4432-a6cf-2629ded387ce.png?v=1569345643","width":206}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eAlloy 910 is a substantial advancement in 3D Printing materials technology from taulman3D. Designed to be extremely strong without any composite fillers, for use in high temperature and high durability applications such as industrial parts and robotics. It is a high quality filament designed to be easy to print with.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003eWith a combined tensile strength higher than the strongest co-polyesters, the durability of Nylons, a shrinkage factor that rivals the t-glase, a vast range of chemical resistance and a 95C working range, you now have one solution easily printable at 245C.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 15px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e:  Alloy 910 is the only Nylon based polymer that makes support removal easier than most using ABS!\u003c\/p\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cstyle id=\"mceDefaultStyles\" type=\"text\/css\"\u003e\u003c!--\n.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;width: 100px;height: 100px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\nbody {min-height: 150px}\n.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e.mce-content-body div.mce-resizehandle {position: absolute;border: 1px solid black;box-sizing: box-sizing;background: #FFF;width: 7px;height: 7px;z-index: 10000}.mce-content-body .mce-resizehandle:hover {background: #000}.mce-content-body img[data-mce-selected],.mce-content-body hr[data-mce-selected] {outline: 1px solid black;resize: none}.mce-content-body .mce-clonedresizable {position: absolute;outline: 1px dashed black;opacity: .5;filter: alpha(opacity=50);z-index: 10000}.mce-content-body .mce-resize-helper {background: #555;background: rgba(0,0,0,0.75);border-radius: 3px;border: 1px;color: white;display: none;font-family: sans-serif;font-size: 12px;white-space: nowrap;line-height: 14px;margin: 5px 10px;padding: 5px;position: absolute;z-index: 10001}\n.mce-visual-caret {position: absolute;background-color: black;background-color: currentcolor;}.mce-visual-caret-hidden {display: none;}*[data-mce-caret] {position: absolute;left: -1000px;right: auto;top: 0;margin: 0;padding: 0;}\n.mce-content-body .mce-offscreen-selection {position: absolute;left: -9999999999px;max-width: 1000000px;}.mce-content-body *[contentEditable=false] {cursor: default;}.mce-content-body *[contentEditable=true] {cursor: text;}\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cscript id=\"mce_1\" src=\"https:\/\/digitmakers.ca\/wp-includes\/js\/tinymce\/plugins\/wpembed\/..\/..\/..\/wp-embed.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cul style=\"margin: 0px 0px 30px 35px; padding: 0px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; white-space: normal; box-sizing: border-box; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e\n\u003cli\u003e8,100 Tensile Strength\u003c\/li\u003e\n\u003cli\u003e32% Elongation\u003c\/li\u003e\n\u003cli\u003eFDA CFR177.1500\u003c\/li\u003e\n\u003cli\u003eSuper low shrinkage\u003c\/li\u003e\n\u003cli\u003eEasy support removal\u003c\/li\u003e\n\u003cli\u003eChemicals resistance of Nylons\u003c\/li\u003e\n\u003cli\u003ePrinting Temp.:\u003cspan style=\"text-align: center; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; word-spacing: 0px; float: none; display: inline !important; white-space: normal; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\"\u003e250°C - 255°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNozzle = any size\u003c\/li\u003e\n\u003cli\u003ePrint speed = ABS speeds\u003c\/li\u003e\n\u003cli\u003eRetraction = 1mm\/.1mm nozzle or for a .5mm nozzle = 5mm\u003c\/li\u003e\n\u003cli\u003ePrint bed = Glass heated to 45C with coat of PVA. Can be printed without a heated bed on a sheet of BuildTak with a coat of PVA.\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"attachment_6634\" class=\"wp-caption alignleft\" style=\"width: 844px;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Taulman Alloy 910-Natural- 2.85mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

Taulman Alloy 910-Natural- 2.85mm

$39.99 CAD

Alloy 910 is a substantial advancement in 3D Printing materials technology from taulman3D. Designed to be extremely strong without any composite fillers, for use in high temperature and high durability applications such as industrial parts and robotics. It is a high quality filament designed to be easy to print with. With a combined tensile s...


More Info
Sale
Taulman Nylon 230 - 1.75mm - 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services
Taulman Nylon 230 - 1.75mm - 1lb

Filaments

$29.99 CAD $39.99 CAD
{"id":8058624779,"title":"Taulman Nylon 230 - 1.75mm - 1lb","handle":"nylon-230-filament-1-75mm","description":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cp\u003eYou can print high strength nylon like PLA ,\u003cstrong\u003e Heated bed is not required\u003c\/strong\u003e  . A great high strength alternative to PLA and ABS.\u003c\/p\u003e\n\u003cp\u003eNylon 230 is the first nylon  developed by Taulman3D that can to be printed at 230°C or a lower temperature than regular 3D Printing Nylon.\u003c\/p\u003e\n\u003cp\u003eWith the release of Nylon 230, taulman3D is providing owners of PLA only or PLA and ABS only 3D Printers to add a high strength Nylon to their list of material choices.\u003c\/p\u003e\n\u003cp\u003eIn addition, Nylon 230 prints on Blue tape, and even better on \"built-tak\" type surfaces as well as print bed treated with various PVA glues\/glue sticks.\u003c\/p\u003e\n\u003cp\u003eNylon 230 is not quite as strong as some of the other taulman3d nylon material (618, 645, Bridge) but is still a very durable, strong and chemically resistant material, enabling you to print engineering grade functional parts using a simple PLA 3D printer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 1lb (0.45kg)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Temperature: \u003c\/strong\u003e230C-238C\u003cbr\u003e \u003cstrong\u003eRetraction:\u003c\/strong\u003e .4mm nozzle = 4mm\u003cbr\u003e \u003cstrong\u003ePrint bed:\u003cbr\u003e \u003c\/strong\u003eHot = Glass heated to 45C with coat of  glue stick\u003cbr\u003e Cold = Blue tape\u003cbr\u003e Cold = BuildTak with coat of glue stick\u003c\/p\u003e\n\u003cdiv id=\"attachment_6634\" class=\"wp-caption alignleft\" style=\"width: 844px;\"\u003e\u003ca data-fancybox=\"\" href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\"\u003e\u003cimg data-role=\"meteor\" data-title=\"tualman-material-selections\" data-info=\"tualman-material-selections\" data-effect=\"bar3\" class=\"size-full wp-image-6634\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\" alt=\"tualman-material-selections\" width=\"834\" height=\"672\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-29T12:28:24-05:00","created_at":"2017-01-29T12:28:24-05:00","vendor":"Taulman","type":"Filaments","tags":["1.75mm","230","3D Printer Filament","Filament","Nylon","Nylon 1.75 mm","PLA","Taulman","woo_import_1"],"price":2999,"price_min":2999,"price_max":2999,"available":true,"price_varies":false,"compare_at_price":3999,"compare_at_price_min":3999,"compare_at_price_max":3999,"compare_at_price_varies":false,"variants":[{"id":26393927755,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TAUL-FL-NYL230-1.75MM-NTRL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taulman Nylon 230 - 1.75mm - 1lb","public_title":null,"options":["Default Title"],"price":2999,"weight":2000,"compare_at_price":3999,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001200","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-nylon-230-1.75mm.jpg?v=1594464426"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-nylon-230-1.75mm.jpg?v=1594464426","options":["Title"],"media":[{"alt":"Taulman Nylon 230 - 1.75mm - 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":94742609956,"position":1,"preview_image":{"aspect_ratio":0.987,"height":228,"width":225,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-nylon-230-1.75mm.jpg?v=1568829411"},"aspect_ratio":0.987,"height":228,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-nylon-230-1.75mm.jpg?v=1568829411","width":225}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cp\u003eYou can print high strength nylon like PLA ,\u003cstrong\u003e Heated bed is not required\u003c\/strong\u003e  . A great high strength alternative to PLA and ABS.\u003c\/p\u003e\n\u003cp\u003eNylon 230 is the first nylon  developed by Taulman3D that can to be printed at 230°C or a lower temperature than regular 3D Printing Nylon.\u003c\/p\u003e\n\u003cp\u003eWith the release of Nylon 230, taulman3D is providing owners of PLA only or PLA and ABS only 3D Printers to add a high strength Nylon to their list of material choices.\u003c\/p\u003e\n\u003cp\u003eIn addition, Nylon 230 prints on Blue tape, and even better on \"built-tak\" type surfaces as well as print bed treated with various PVA glues\/glue sticks.\u003c\/p\u003e\n\u003cp\u003eNylon 230 is not quite as strong as some of the other taulman3d nylon material (618, 645, Bridge) but is still a very durable, strong and chemically resistant material, enabling you to print engineering grade functional parts using a simple PLA 3D printer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 1lb (0.45kg)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Temperature: \u003c\/strong\u003e230C-238C\u003cbr\u003e \u003cstrong\u003eRetraction:\u003c\/strong\u003e .4mm nozzle = 4mm\u003cbr\u003e \u003cstrong\u003ePrint bed:\u003cbr\u003e \u003c\/strong\u003eHot = Glass heated to 45C with coat of  glue stick\u003cbr\u003e Cold = Blue tape\u003cbr\u003e Cold = BuildTak with coat of glue stick\u003c\/p\u003e\n\u003cdiv id=\"attachment_6634\" class=\"wp-caption alignleft\" style=\"width: 844px;\"\u003e\u003ca data-fancybox=\"\" href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\"\u003e\u003cimg data-role=\"meteor\" data-title=\"tualman-material-selections\" data-info=\"tualman-material-selections\" data-effect=\"bar3\" class=\"size-full wp-image-6634\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\" alt=\"tualman-material-selections\" width=\"834\" height=\"672\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Taulman Nylon 230 - 1.75mm - 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

Taulman Nylon 230 - 1.75mm - 1lb

$29.99 CAD

You can print high strength nylon like PLA , Heated bed is not required  . A great high strength alternative to PLA and ABS. Nylon 230 is the first nylon  developed by Taulman3D that can to be printed at 230°C or a lower temperature than regular 3D Printing Nylon. With the release of Nylon 230, taulman3D is providing owners of PLA only or PLA ...


More Info
Sale
Taulman Nylon 230 Filament -2.85 mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services
Taulman Nylon 230 Filament -2.85 mm

Filaments

$29.99 CAD $39.99 CAD
{"id":8058624971,"title":"Taulman Nylon 230 Filament -2.85 mm","handle":"nylon-230-filament-2-85-mm","description":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cp\u003eYou can print high strength nylon like PLA ,\u003cstrong\u003e Heted bed is not required\u003c\/strong\u003e  . A great high strength alternative to PLA and ABS.\u003c\/p\u003e\n\u003cp\u003eNylon 230 is the first nylon  developed by Taulman3D that can to be printed at 230°C or a lower temperature than regular 3D Printing Nylon.\u003c\/p\u003e\n\u003cp\u003eWith the release of Nylon 230, taulman3D is providing owners of PLA only or PLA and ABS only 3D Printers to add a high strength Nylon to their list of material choices.\u003c\/p\u003e\n\u003cp\u003eIn addition, Nylon 230 prints on Blue tape, and even better on \"built-tak\" type surfaces as well as print bed treated with various PVA glues\/glue sticks.\u003c\/p\u003e\n\u003cp\u003eNylon 230 is not quite as strong as some of the other taulman3d nylon material (618, 645, Bridge) but is still a very durable, strong and chemically resistant material, enabling you to print engineering grade functional parts using a simple PLA 3D printer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 1lb (0.45kg)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Temperature: \u003c\/strong\u003e230°C (225 - 235°C)\u003cbr\u003e \u003cstrong\u003eRetraction:\u003c\/strong\u003e .4mm nozzle = 4mm\u003cbr\u003e \u003cstrong\u003ePrint bed:\u003cbr\u003e \u003c\/strong\u003eHot = Glass heated to 45C with coat of  glue stick\u003cbr\u003e Cold = Blue tape\u003cbr\u003e Cold = BuildTak with coat of glue stick\u003c\/p\u003e\n\u003cdiv id=\"attachment_6634\" class=\"wp-caption alignleft\" style=\"width: 844px;\"\u003e\u003ca data-fancybox=\"\" href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\"\u003e\u003cimg data-role=\"meteor\" data-title=\"tualman-material-selections\" data-info=\"tualman-material-selections\" data-effect=\"bar3\" class=\"size-full wp-image-6634\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\" alt=\"tualman-material-selections\" width=\"834\" height=\"672\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-29T12:28:25-05:00","created_at":"2017-01-29T12:28:25-05:00","vendor":"Taulman","type":"Filaments","tags":["2.85mm","230","3D Printer Filament","3mm","Filament","Nylon","Nylon 3 mm \/ 2.85 mm","PLA","Taulman","woo_import_1"],"price":2999,"price_min":2999,"price_max":2999,"available":true,"price_varies":false,"compare_at_price":3999,"compare_at_price_min":3999,"compare_at_price_max":3999,"compare_at_price_varies":false,"variants":[{"id":26393930699,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FL0012-Nylon-Taul-230-2.85mm","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taulman Nylon 230 Filament -2.85 mm","public_title":null,"options":["Default Title"],"price":2999,"weight":1000,"compare_at_price":3999,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"688295584315","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Nylon-230-2.85.png?v=1594464427"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Nylon-230-2.85.png?v=1594464427","options":["Title"],"media":[{"alt":"Taulman Nylon 230 Filament -2.85 mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":94742642724,"position":1,"preview_image":{"aspect_ratio":1.103,"height":600,"width":662,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Nylon-230-2.85.png?v=1568829411"},"aspect_ratio":1.103,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Nylon-230-2.85.png?v=1568829411","width":662}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cp\u003eYou can print high strength nylon like PLA ,\u003cstrong\u003e Heted bed is not required\u003c\/strong\u003e  . A great high strength alternative to PLA and ABS.\u003c\/p\u003e\n\u003cp\u003eNylon 230 is the first nylon  developed by Taulman3D that can to be printed at 230°C or a lower temperature than regular 3D Printing Nylon.\u003c\/p\u003e\n\u003cp\u003eWith the release of Nylon 230, taulman3D is providing owners of PLA only or PLA and ABS only 3D Printers to add a high strength Nylon to their list of material choices.\u003c\/p\u003e\n\u003cp\u003eIn addition, Nylon 230 prints on Blue tape, and even better on \"built-tak\" type surfaces as well as print bed treated with various PVA glues\/glue sticks.\u003c\/p\u003e\n\u003cp\u003eNylon 230 is not quite as strong as some of the other taulman3d nylon material (618, 645, Bridge) but is still a very durable, strong and chemically resistant material, enabling you to print engineering grade functional parts using a simple PLA 3D printer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 1lb (0.45kg)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Temperature: \u003c\/strong\u003e230°C (225 - 235°C)\u003cbr\u003e \u003cstrong\u003eRetraction:\u003c\/strong\u003e .4mm nozzle = 4mm\u003cbr\u003e \u003cstrong\u003ePrint bed:\u003cbr\u003e \u003c\/strong\u003eHot = Glass heated to 45C with coat of  glue stick\u003cbr\u003e Cold = Blue tape\u003cbr\u003e Cold = BuildTak with coat of glue stick\u003c\/p\u003e\n\u003cdiv id=\"attachment_6634\" class=\"wp-caption alignleft\" style=\"width: 844px;\"\u003e\u003ca data-fancybox=\"\" href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\"\u003e\u003cimg data-role=\"meteor\" data-title=\"tualman-material-selections\" data-info=\"tualman-material-selections\" data-effect=\"bar3\" class=\"size-full wp-image-6634\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\" alt=\"tualman-material-selections\" width=\"834\" height=\"672\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Taulman Nylon 230 Filament -2.85 mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

Taulman Nylon 230 Filament -2.85 mm

$29.99 CAD

You can print high strength nylon like PLA , Heted bed is not required  . A great high strength alternative to PLA and ABS. Nylon 230 is the first nylon  developed by Taulman3D that can to be printed at 230°C or a lower temperature than regular 3D Printing Nylon. With the release of Nylon 230, taulman3D is providing owners of PLA only or PLA a...


More Info
{"id":9027491851,"title":"Taulman Nylon 645 Filament - Natural - 1.75mm","handle":"nylon-645-filament-natural-1-75mm","description":"\u003cp\u003eTaulman 3D \"645\" is a high strength nylon co-polymer that is specifically engineered for 3D printing applications where excellent surface bonding, reduced water absorption, tear resistance and \u003cstrong\u003etransparency\u003c\/strong\u003e are combined into an easy-to-print line.\u003c\/p\u003e\n\u003cp\u003eTaulman 645 comes from the same manufacturer as Taulman 618, it has all of the same remarkable characteristics when it comes to strength and durability. \u003cstrong\u003eTaulman 645 Nylon has comparable warping properties as Taulman 618, but is different in that it is stronger, has improved surface bonding, and is more clear\/translucent.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNylon 645 prints as a bright natural with a clear translucent surface.\u003c\/li\u003e\n\u003cli\u003eVery high strength\u003c\/li\u003e\n\u003cli\u003eExtreme durability\u003c\/li\u003e\n\u003cli\u003eExcellent bridging performance\u003c\/li\u003e\n\u003cli\u003eSuperior surface texture\u003c\/li\u003e\n\u003cli\u003eMaximum bonding during a thermal (3D Printing) transition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE To industrial users - Nylon 645 is the equivalent of a non-filled Nylon 6,6\u003cbr\u003ehaving almost identical Chemical resistance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"taulman nylon 645 3d printer Digitmakers\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/taulman-nylon-645-3d-printer-filament-Canada.jpg?v=1487042141\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan size=\"5\"\u003eNylon 645 Features:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e6\u003c\/span\u003e\u003cspan\u003e45\u003c\/span\u003e\u003cspan size=\"3\"\u003e is currently being used by CNC shops around the world to support quick turn prototypes for Pre-Pilot and Pilot runs as well as some limited production runs.  As global supply compresses and just-in-time becomes just-a-little-late, more and more CNC shops are jumping in to fill quick turn needs.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e645 is machinable with similar settings and cutting speeds as used in Cast Nylon blocks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan size=\"3\"\u003eThermal properties are slightly higher than Nylon 6,6 and Nylon 6,12.  \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGeneral FAQ\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWhat are the major differences to me if I print in 645 ?    \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003eThere is almost no \u003c\/span\u003eDe-lamination\u003cspan size=\"3\"\u003e. The bonding of thread-to-thread at the correct temperature is very impressive. Of course, even injection molded parts are subject to splitting at right angle transitions, but compared to ABS and PLA we know you will be impressed. 645 gives off no odor as compared to ABS. Residual odors come from the humidity (water) that boils or steams off during printing.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWhat makes 645 different from standard nylon?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003eStandard nylons have been tried in the past and failed due to very high temperatures and the lack of compression in RepRap type printers.  The greatest amount of the strength and bonding of the nylons comes from the compression used in injection molding processes with dies.  Of course RepRap type printers print with no compression at all, thus reducing bonding significantly.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e   645 uses a modification to the standard material chain resulting in a new co-polymer to dramatically enhance bonding. To accomplish this improved bonding and thermal uniformity during the 3D Printing process, both the new co-polymer and manufacturing method are unique to 645.  The resistance to chemical degradation was also a top priority for 645 as the ability to 3D Print molds as well as operate in harsh environments was at the top of the list of material performance requirements.   The final requirement for 645 was surface finish.  As a material that can be used to print parts that in turn would be supplied directly to the end user\/customer, 645 was to be instantly recognizable as a superior polymer.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Can I still print in High Resolution?  \u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003eAbsolutely.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eI want to print parts in 645, what is the best printer to buy?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    taulman is hardware neutral. This includes complete assemblies\/Printers and sub-assemblies\/Hot-Ends, extruders, etc..  As a \"filament\", 645 is designed to be used by all RepRap style\/type 3D Printers.  There are several great Forums and IRC Channels dedicated to helping new users.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e What setting will I need to change in my skinning software?  \u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e.    Most testers found they only needed to make sure their idler tension was tight so the material didn't slip.  Otherwise, it's install and print!  Users with direct drive 1.75mm extruders found that a small increase in retraction distance helped to eliminate trailing threads.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e  Can I still use bridging?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    Yes, in fact several testers report excellent results with bridging.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Can I print parts that have a smooth color luster?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    Definitely!  645 delivers a beautiful printed finish.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e How do I get prints to stick to my platform?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e        The best bonding is to coat clean glass with PVA (Elmers Glue All) and heat the glass to 45-50C.  This creates a significant \"tak\" that should hold all prints in place.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAre there fumes and odors?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    The taulman polyamide materials give off almost no odor as compared to ABS.  Most residual odors come from the humidity (water) that boils or steams off during printing and 645 had no measurable \u003c\/span\u003e\u003ca href=\"http:\/\/www.instructables.com\/id\/Is-3D-Printing-Safe-or-DIY-Testing-for-HCN-from-\/\"\u003eHCN\u003c\/a\u003e\u003cspan size=\"3\"\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    When printing with ABS, Nylon, PLA or any material, we are changing the state of elements with temperature, so make sure you vent all fumes and odors.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIs 645 FDA Approved?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    No, as FDA approval is a very expensive undertaking.  645 is inert to the body and contains zero organics.  645 is also \"indigestible\" and will pass through the system.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e What is the most \"visible\" printing difference I'll notice when printing with 645?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    Shine or sheen from the translucent surface.  This looks much different than PLA surfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e Will 645 foul my nozzle if I leave the heater on?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    No! ...We've left our heaters on for over 8 hours after a print with no issues at all.  We also commonly move back and forth from ABS to 645 with no issues at all.  We just purge about 50mm's and start printing.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Is there any chemical that I should \"not\" use with 645?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e   Yes, any strong acids or Chlorine's\/Bromine's can be a problem.  They will break down the bonding of threads and weaken the printed part.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e What will be the biggest differences in my part from being printed in ABS and then 645?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e1. Strength.   You will be amazed at the strength properties of 645.  Some testers have reported 80%-100% fill is as strong as injection molded parts.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e2. Weight....645 is lighter than ABS and PLA.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e3. Pliability - A major advantage with 645 is the pliability that some of us have desired for a long time.  From stretch in bands, to elasticity in support components. Pliability means that multi-part assemblies are more likely to work as designed with minimal filing, cutting and sanding.  Springs can be completely compressed and return to a printed state.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e4. Slippery Surface - 645 can eliminate collars, U-joints, washers, separate raceways and ball joints by using the materials slippery properties.  Ball bearings that require no lubrication are easily printed. And most important, threaded holes that won't delaminate under pressure.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Will retraction work?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e   Yes!  At most, you may have to increase your retraction distance an additional 2mm - 3mm.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Your Color Page mentions RIT Dyes, are there other dyes I can use?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e  You can use any dye that is \"acid based\".  Most textile dyes and some paper dyes are acid based.  These are very light acids on the same pH level as vinegar.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e  Can I glue my 645 parts together?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e  taulman3D now offers a Nylon Glue called \"ComPlete\"\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCan I just use plain Nylon trimmer line?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e  Trimmer line does \"look\" like and contain nylon, however, trimmer line or weed-whacker line also contains various additives that are destructive and or dangerous for your 3D Printer.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003eFirst, it has fiberglass to strengthen it, as without fiberglass, the ends will fray\/split and cause trimmer jams. Next, nylon on it's own is too flexible in a thin line, so fiberglass hardens it for cutting. Fiberglass will foul your nozzle because it requires a higher temp to melt along with the nylon. The higher temp will actually boil the nylon and other additives giving off a smell. The additives are there to reduce the bulk % of nylon as nylon is more expensive than the additives. These additives are usually calcium based and can clog or foul your nozzle\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTORAGE: \u003c\/strong\u003eOne large resealable bag with slider + an extra desiccant pack are \u003cstrong\u003eincluded\u003c\/strong\u003e with every spool. The bag and extra desiccant are a great way to safely store your filament spool when not in use. It keeps your filament bone dry \u0026amp; free from any dust or dirt particles, so it's always ready for your next print.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable with=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"15%\"\u003e \u003cimg alt=\"3d filament net weight\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-filament-Weight_icon.png?10482698017282975306\"\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG\u003cspan\u003e (1.1 LB)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\"\u003e\n\u003ch3\u003e\n\u003cimg alt=\"3d printing temperature guideline\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-printing-temperature-guideline_pico.jpg?17244370916201715492\"\u003e Printing\u003cbr\u003eTemperature:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e250°C - 265°C\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNozzle = any size\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003cli\u003e618 will not print\/stick to glass or aluminum print tables. The best table material for a new user is a flat piece of unfinished poplar wood or blue painters tape. For perfect adhesion, Taulman 3D recommends using Garolite (LE).\u003c\/li\u003e\n\u003cli\u003e645 is an industrial line and as such is designed to print in greater layer heights than you usually print.  There is no need to print fine layers unless you need high vertical resolution.  We suggest 60% OF NOZZLE DIA.\u003c\/li\u003e\n\u003cli\u003eTaulman 645 has a slightly higher viscosity than other printing materials.  As the layer height exceeds 50% of the nozzle dia, printing speed should be adjusted downward ~10% - 20%\u003c\/li\u003e\n\u003cli\u003eRetraction: due to a slightly higher viscosity, the retraction distance may need to be lengthened\u003c\/li\u003e\n\u003cli\u003eExcessive bubbles in the printed thread are an indication of a higher than required print temperature. Reducing Print temperature below 238C will result in less thread opacity due to recombination with the atmosphere, however this will also reduce bonding in layers exceeding 25% of nozzle diameter\u003c\/li\u003e\n\u003cli\u003eShrinkage is equal to ABS and can be controlled using garolite (LE) as a print table cover\/plate\u003c\/li\u003e\n\u003cli\u003eHeated beds help just as they do for printing with ABS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","published_at":"2017-01-29T12:28:34-05:00","created_at":"2017-06-01T15:15:30-04:00","vendor":"Taulman","type":"Filaments","tags":["1.75mm","3D Printer Filament","645","Filament","Nylon","Nylon 1.75 mm","Nylon 645","Taulman"],"price":3999,"price_min":3999,"price_max":3999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31762165899,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TAUL-FL-NYL645-1.75MM-NTRL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taulman Nylon 645 Filament - Natural - 1.75mm","public_title":null,"options":["Default Title"],"price":3999,"weight":2000,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"688295584209","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Nylon_645.png?v=1594464486"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Nylon_645.png?v=1594464486","options":["Title"],"media":[{"alt":"Taulman Nylon 645 Filament - Natural - 1.75mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":261423464579,"position":1,"preview_image":{"aspect_ratio":1.155,"height":148,"width":171,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Nylon_645.png?v=1568960151"},"aspect_ratio":1.155,"height":148,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Nylon_645.png?v=1568960151","width":171}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eTaulman 3D \"645\" is a high strength nylon co-polymer that is specifically engineered for 3D printing applications where excellent surface bonding, reduced water absorption, tear resistance and \u003cstrong\u003etransparency\u003c\/strong\u003e are combined into an easy-to-print line.\u003c\/p\u003e\n\u003cp\u003eTaulman 645 comes from the same manufacturer as Taulman 618, it has all of the same remarkable characteristics when it comes to strength and durability. \u003cstrong\u003eTaulman 645 Nylon has comparable warping properties as Taulman 618, but is different in that it is stronger, has improved surface bonding, and is more clear\/translucent.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNylon 645 prints as a bright natural with a clear translucent surface.\u003c\/li\u003e\n\u003cli\u003eVery high strength\u003c\/li\u003e\n\u003cli\u003eExtreme durability\u003c\/li\u003e\n\u003cli\u003eExcellent bridging performance\u003c\/li\u003e\n\u003cli\u003eSuperior surface texture\u003c\/li\u003e\n\u003cli\u003eMaximum bonding during a thermal (3D Printing) transition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE To industrial users - Nylon 645 is the equivalent of a non-filled Nylon 6,6\u003cbr\u003ehaving almost identical Chemical resistance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"taulman nylon 645 3d printer Digitmakers\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/taulman-nylon-645-3d-printer-filament-Canada.jpg?v=1487042141\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan size=\"5\"\u003eNylon 645 Features:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e6\u003c\/span\u003e\u003cspan\u003e45\u003c\/span\u003e\u003cspan size=\"3\"\u003e is currently being used by CNC shops around the world to support quick turn prototypes for Pre-Pilot and Pilot runs as well as some limited production runs.  As global supply compresses and just-in-time becomes just-a-little-late, more and more CNC shops are jumping in to fill quick turn needs.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e645 is machinable with similar settings and cutting speeds as used in Cast Nylon blocks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan size=\"3\"\u003eThermal properties are slightly higher than Nylon 6,6 and Nylon 6,12.  \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGeneral FAQ\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWhat are the major differences to me if I print in 645 ?    \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003eThere is almost no \u003c\/span\u003eDe-lamination\u003cspan size=\"3\"\u003e. The bonding of thread-to-thread at the correct temperature is very impressive. Of course, even injection molded parts are subject to splitting at right angle transitions, but compared to ABS and PLA we know you will be impressed. 645 gives off no odor as compared to ABS. Residual odors come from the humidity (water) that boils or steams off during printing.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWhat makes 645 different from standard nylon?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003eStandard nylons have been tried in the past and failed due to very high temperatures and the lack of compression in RepRap type printers.  The greatest amount of the strength and bonding of the nylons comes from the compression used in injection molding processes with dies.  Of course RepRap type printers print with no compression at all, thus reducing bonding significantly.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e   645 uses a modification to the standard material chain resulting in a new co-polymer to dramatically enhance bonding. To accomplish this improved bonding and thermal uniformity during the 3D Printing process, both the new co-polymer and manufacturing method are unique to 645.  The resistance to chemical degradation was also a top priority for 645 as the ability to 3D Print molds as well as operate in harsh environments was at the top of the list of material performance requirements.   The final requirement for 645 was surface finish.  As a material that can be used to print parts that in turn would be supplied directly to the end user\/customer, 645 was to be instantly recognizable as a superior polymer.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Can I still print in High Resolution?  \u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003eAbsolutely.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eI want to print parts in 645, what is the best printer to buy?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    taulman is hardware neutral. This includes complete assemblies\/Printers and sub-assemblies\/Hot-Ends, extruders, etc..  As a \"filament\", 645 is designed to be used by all RepRap style\/type 3D Printers.  There are several great Forums and IRC Channels dedicated to helping new users.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e What setting will I need to change in my skinning software?  \u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e.    Most testers found they only needed to make sure their idler tension was tight so the material didn't slip.  Otherwise, it's install and print!  Users with direct drive 1.75mm extruders found that a small increase in retraction distance helped to eliminate trailing threads.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e  Can I still use bridging?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    Yes, in fact several testers report excellent results with bridging.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Can I print parts that have a smooth color luster?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    Definitely!  645 delivers a beautiful printed finish.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e How do I get prints to stick to my platform?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e        The best bonding is to coat clean glass with PVA (Elmers Glue All) and heat the glass to 45-50C.  This creates a significant \"tak\" that should hold all prints in place.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAre there fumes and odors?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    The taulman polyamide materials give off almost no odor as compared to ABS.  Most residual odors come from the humidity (water) that boils or steams off during printing and 645 had no measurable \u003c\/span\u003e\u003ca href=\"http:\/\/www.instructables.com\/id\/Is-3D-Printing-Safe-or-DIY-Testing-for-HCN-from-\/\"\u003eHCN\u003c\/a\u003e\u003cspan size=\"3\"\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    When printing with ABS, Nylon, PLA or any material, we are changing the state of elements with temperature, so make sure you vent all fumes and odors.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIs 645 FDA Approved?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    No, as FDA approval is a very expensive undertaking.  645 is inert to the body and contains zero organics.  645 is also \"indigestible\" and will pass through the system.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e What is the most \"visible\" printing difference I'll notice when printing with 645?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    Shine or sheen from the translucent surface.  This looks much different than PLA surfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e Will 645 foul my nozzle if I leave the heater on?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e    No! ...We've left our heaters on for over 8 hours after a print with no issues at all.  We also commonly move back and forth from ABS to 645 with no issues at all.  We just purge about 50mm's and start printing.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Is there any chemical that I should \"not\" use with 645?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e   Yes, any strong acids or Chlorine's\/Bromine's can be a problem.  They will break down the bonding of threads and weaken the printed part.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e What will be the biggest differences in my part from being printed in ABS and then 645?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e1. Strength.   You will be amazed at the strength properties of 645.  Some testers have reported 80%-100% fill is as strong as injection molded parts.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e2. Weight....645 is lighter than ABS and PLA.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e3. Pliability - A major advantage with 645 is the pliability that some of us have desired for a long time.  From stretch in bands, to elasticity in support components. Pliability means that multi-part assemblies are more likely to work as designed with minimal filing, cutting and sanding.  Springs can be completely compressed and return to a printed state.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e4. Slippery Surface - 645 can eliminate collars, U-joints, washers, separate raceways and ball joints by using the materials slippery properties.  Ball bearings that require no lubrication are easily printed. And most important, threaded holes that won't delaminate under pressure.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Will retraction work?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e   Yes!  At most, you may have to increase your retraction distance an additional 2mm - 3mm.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Your Color Page mentions RIT Dyes, are there other dyes I can use?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e  You can use any dye that is \"acid based\".  Most textile dyes and some paper dyes are acid based.  These are very light acids on the same pH level as vinegar.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e  Can I glue my 645 parts together?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e  taulman3D now offers a Nylon Glue called \"ComPlete\"\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCan I just use plain Nylon trimmer line?\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003e  Trimmer line does \"look\" like and contain nylon, however, trimmer line or weed-whacker line also contains various additives that are destructive and or dangerous for your 3D Printer.\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\"\u003eFirst, it has fiberglass to strengthen it, as without fiberglass, the ends will fray\/split and cause trimmer jams. Next, nylon on it's own is too flexible in a thin line, so fiberglass hardens it for cutting. Fiberglass will foul your nozzle because it requires a higher temp to melt along with the nylon. The higher temp will actually boil the nylon and other additives giving off a smell. The additives are there to reduce the bulk % of nylon as nylon is more expensive than the additives. These additives are usually calcium based and can clog or foul your nozzle\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTORAGE: \u003c\/strong\u003eOne large resealable bag with slider + an extra desiccant pack are \u003cstrong\u003eincluded\u003c\/strong\u003e with every spool. The bag and extra desiccant are a great way to safely store your filament spool when not in use. It keeps your filament bone dry \u0026amp; free from any dust or dirt particles, so it's always ready for your next print.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable with=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"15%\"\u003e \u003cimg alt=\"3d filament net weight\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-filament-Weight_icon.png?10482698017282975306\"\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG\u003cspan\u003e (1.1 LB)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\"\u003e\n\u003ch3\u003e\n\u003cimg alt=\"3d printing temperature guideline\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-printing-temperature-guideline_pico.jpg?17244370916201715492\"\u003e Printing\u003cbr\u003eTemperature:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e250°C - 265°C\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNozzle = any size\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003cli\u003e618 will not print\/stick to glass or aluminum print tables. The best table material for a new user is a flat piece of unfinished poplar wood or blue painters tape. For perfect adhesion, Taulman 3D recommends using Garolite (LE).\u003c\/li\u003e\n\u003cli\u003e645 is an industrial line and as such is designed to print in greater layer heights than you usually print.  There is no need to print fine layers unless you need high vertical resolution.  We suggest 60% OF NOZZLE DIA.\u003c\/li\u003e\n\u003cli\u003eTaulman 645 has a slightly higher viscosity than other printing materials.  As the layer height exceeds 50% of the nozzle dia, printing speed should be adjusted downward ~10% - 20%\u003c\/li\u003e\n\u003cli\u003eRetraction: due to a slightly higher viscosity, the retraction distance may need to be lengthened\u003c\/li\u003e\n\u003cli\u003eExcessive bubbles in the printed thread are an indication of a higher than required print temperature. Reducing Print temperature below 238C will result in less thread opacity due to recombination with the atmosphere, however this will also reduce bonding in layers exceeding 25% of nozzle diameter\u003c\/li\u003e\n\u003cli\u003eShrinkage is equal to ABS and can be controlled using garolite (LE) as a print table cover\/plate\u003c\/li\u003e\n\u003cli\u003eHeated beds help just as they do for printing with ABS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e"}
Taulman Nylon 645 Filament - Natural - 1.75mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

Taulman Nylon 645 Filament - Natural - 1.75mm

$39.99 CAD

Taulman 3D "645" is a high strength nylon co-polymer that is specifically engineered for 3D printing applications where excellent surface bonding, reduced water absorption, tear resistance and transparency are combined into an easy-to-print line. Taulman 645 comes from the same manufacturer as Taulman 618, it has all of the same remarkable chara...


More Info
{"id":9027637003,"title":"Taulman Nylon 680 - 1.75mm-FDA Material","handle":"nylon-680-filament-natural-1-75mm","description":"\u003cp\u003eTaulman3D Nylon 680 FDA Nylon is a high grade pure polymer that is FDA approved for indirect food contact! Taulman 680 was designed to print in the same temperature range as other taulman nylons. It is less pliable and more transparent than the Taulman 645 as it is intended to support many medical uses as well as non-destructive visual inspection of printed parts.\u003c\/p\u003e\n\u003cp\u003eThe polymer is a pure polymer that is FDA approved.  There are no additives u\u003cspan\u003esed in the chemical manufacturing or extrusion processes.  Nylon 680 uses taulman3D's processes to accommodate it's use in FFM style\/type 3D Printers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNylon 680 is designed to be dishwasher safe, so that it can survive boiling water and steam\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOne other feature worth noting of this material is that its clarity allows for the relative ease of non-destructive evaluation of parts printed in Nylon 680 using a light table. Due to its clarity, users can see if a part has good adhesion on the inside of a part, where the infill meets the perimeter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost Process capability:\u003c\/strong\u003e\u003cbr\u003eNylon 680 is compatible with Ethylene oxide and Flash Steam post processing.\u003cbr\u003eNote ; Nylon is hygroscopic and any water based processing will require a longer dry time.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/taulman-nylon-680-3d-printer-filament-Canada.jpg?v=1487043298\" alt=\"taulman 680 nylon 3d printer filament Canada\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/taulman-nylon-680-3d-printer-filament-Canada-2.jpg?v=1487043324\" alt=\"taulman 680 nylon 3d printer filament Canada\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSTORAGE: \u003c\/strong\u003eOne large resealable bag with slider + an extra desiccant pack are \u003cstrong\u003eincluded\u003c\/strong\u003e with every spool. The bag and extra desiccant are a great way to safely store your filament spool when not in use. It keeps your filament bone dry \u0026amp; free from any dust or dirt particles, so it's always ready for your next print.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable with=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"15%\"\u003e \u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG\u003cspan\u003e (1.1 LB)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\"\u003e\n\u003ch3\u003e\n\u003cimg alt=\"3d printing temperature guideline\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-printing-temperature-guideline_pico.jpg?17244370916201715492\"\u003e Printing\u003cbr\u003eTemperature:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e250°C - 255°C\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003ePrint bed = Glass heated to 45C with coat of PVA.\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","published_at":"2017-01-29T12:28:34-05:00","created_at":"2017-06-01T15:30:03-04:00","vendor":"Taulman","type":"Filaments","tags":["1.75mm","3D Printer Filament","680","Business","FDA","Filament","Nylon","Nylon 1.75 mm","Nylon 680","Taulman"],"price":6499,"price_min":6499,"price_max":6499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31762803531,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FL0012-Nylon 680-1.75mm","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taulman Nylon 680 - 1.75mm-FDA Material","public_title":null,"options":["Default Title"],"price":6499,"weight":800,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"688295584339","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Nylon680.png?v=1594464486"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Nylon680.png?v=1594464486","options":["Title"],"media":[{"alt":"Taulman Nylon 680 - 1.75mm-FDA Material - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":261423825027,"position":1,"preview_image":{"aspect_ratio":1.093,"height":162,"width":177,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Nylon680.png?v=1568960151"},"aspect_ratio":1.093,"height":162,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Nylon680.png?v=1568960151","width":177}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eTaulman3D Nylon 680 FDA Nylon is a high grade pure polymer that is FDA approved for indirect food contact! Taulman 680 was designed to print in the same temperature range as other taulman nylons. It is less pliable and more transparent than the Taulman 645 as it is intended to support many medical uses as well as non-destructive visual inspection of printed parts.\u003c\/p\u003e\n\u003cp\u003eThe polymer is a pure polymer that is FDA approved.  There are no additives u\u003cspan\u003esed in the chemical manufacturing or extrusion processes.  Nylon 680 uses taulman3D's processes to accommodate it's use in FFM style\/type 3D Printers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNylon 680 is designed to be dishwasher safe, so that it can survive boiling water and steam\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOne other feature worth noting of this material is that its clarity allows for the relative ease of non-destructive evaluation of parts printed in Nylon 680 using a light table. Due to its clarity, users can see if a part has good adhesion on the inside of a part, where the infill meets the perimeter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost Process capability:\u003c\/strong\u003e\u003cbr\u003eNylon 680 is compatible with Ethylene oxide and Flash Steam post processing.\u003cbr\u003eNote ; Nylon is hygroscopic and any water based processing will require a longer dry time.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/taulman-nylon-680-3d-printer-filament-Canada.jpg?v=1487043298\" alt=\"taulman 680 nylon 3d printer filament Canada\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/taulman-nylon-680-3d-printer-filament-Canada-2.jpg?v=1487043324\" alt=\"taulman 680 nylon 3d printer filament Canada\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSTORAGE: \u003c\/strong\u003eOne large resealable bag with slider + an extra desiccant pack are \u003cstrong\u003eincluded\u003c\/strong\u003e with every spool. The bag and extra desiccant are a great way to safely store your filament spool when not in use. It keeps your filament bone dry \u0026amp; free from any dust or dirt particles, so it's always ready for your next print.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable with=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"15%\"\u003e \u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG\u003cspan\u003e (1.1 LB)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\"\u003e\n\u003ch3\u003e\n\u003cimg alt=\"3d printing temperature guideline\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-printing-temperature-guideline_pico.jpg?17244370916201715492\"\u003e Printing\u003cbr\u003eTemperature:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e250°C - 255°C\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003ePrint bed = Glass heated to 45C with coat of PVA.\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e"}
Taulman Nylon 680 - 1.75mm-FDA Material - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

Taulman Nylon 680 - 1.75mm-FDA Material

$64.99 CAD

Taulman3D Nylon 680 FDA Nylon is a high grade pure polymer that is FDA approved for indirect food contact! Taulman 680 was designed to print in the same temperature range as other taulman nylons. It is less pliable and more transparent than the Taulman 645 as it is intended to support many medical uses as well as non-destructive visual inspectio...


More Info
{"id":9027676811,"title":"Taulman Nylon 680 Filament -2.85 mm FDA Material","handle":"nylon-680-filament-2-85-mm-fda-material","description":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cp\u003eTaulman3D Nylon 680 FDA Nylon is a high grade pure polymer that is FDA approved for indirect food contact! Taulman 680 was designed to print in the same temperature range as other taulman nylons. It is less pliable and more transparent than the Taulman 645 as it is intended to support many medical uses as well as non-destructive visual inspection of printed parts.\u003c\/p\u003e\n\u003cp\u003eThe polymer is a pure polymer that is FDA approved.  There are no additives u\u003cspan\u003esed in the chemical manufacturing or extrusion processes.  Nylon 680 uses taulman3D's processes to accommodate it's use in FFM style\/type 3D Printers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNylon 680 is designed to be dishwasher safe, so that it can survive boiling water and steam\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOne other feature worth noting of this material is that its clarity allows for the relative ease of non-destructive evaluation of parts printed in Nylon 680 using a light table. Due to its clarity, users can see if a part has good adhesion on the inside of a part, where the infill meets the perimeter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost Process capability:\u003c\/strong\u003e\u003cbr\u003eNylon 680 is compatible with Ethylene oxide and Flash Steam post processing.\u003cbr\u003eNote ; Nylon is hygroscopic and any water based processing will require a longer dry time.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/taulman-nylon-680-3d-printer-filament-Canada.jpg?v=1487043298\" alt=\"taulman 680 nylon 3d printer filament Canada\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/taulman-nylon-680-3d-printer-filament-Canada-2.jpg?v=1487043324\" alt=\"taulman 680 nylon 3d printer filament Canada\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSTORAGE: \u003c\/strong\u003eOne large resealable bag with slider + an extra desiccant pack are \u003cstrong\u003eincluded\u003c\/strong\u003e with every spool. The bag and extra desiccant are a great way to safely store your filament spool when not in use. It keeps your filament bone dry \u0026amp; free from any dust or dirt particles, so it's always ready for your next print.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable with=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"15%\"\u003e \u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG\u003cspan\u003e (1.1 LB)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\"\u003e\n\u003ch3\u003e\n\u003cimg alt=\"3d printing temperature guideline\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-printing-temperature-guideline_pico.jpg?17244370916201715492\"\u003e Printing\u003cbr\u003eTemperature:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e250°C - 255°C\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003ePrint bed = Glass heated to 45C with coat of PVA.\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-29T12:28:25-05:00","created_at":"2017-06-01T15:36:20-04:00","vendor":"Taulman","type":"Filaments","tags":["2.85mm","3D Printer Filament","3mm","680","Filament","Nylon","Nylon 3 mm \/ 2.85 mm","Nylon 680","PLA","Taulman"],"price":6499,"price_min":6499,"price_max":6499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31763063371,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FL0012-Nylon-Taul-680-2.85mm","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taulman Nylon 680 Filament -2.85 mm FDA Material","public_title":null,"options":["Default Title"],"price":6499,"weight":1000,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10000998","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Nylon680_be4adc80-f3e9-41ed-a797-ecc80db5943a.png?v=1594464487"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Nylon680_be4adc80-f3e9-41ed-a797-ecc80db5943a.png?v=1594464487","options":["Title"],"media":[{"alt":"Taulman Nylon 680 Filament -2.85 mm FDA Material - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":261423956099,"position":1,"preview_image":{"aspect_ratio":1.093,"height":162,"width":177,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Nylon680_be4adc80-f3e9-41ed-a797-ecc80db5943a.png?v=1568960151"},"aspect_ratio":1.093,"height":162,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Nylon680_be4adc80-f3e9-41ed-a797-ecc80db5943a.png?v=1568960151","width":177}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cdiv class=\"product-description rte\"\u003e\n\u003cp\u003eTaulman3D Nylon 680 FDA Nylon is a high grade pure polymer that is FDA approved for indirect food contact! Taulman 680 was designed to print in the same temperature range as other taulman nylons. It is less pliable and more transparent than the Taulman 645 as it is intended to support many medical uses as well as non-destructive visual inspection of printed parts.\u003c\/p\u003e\n\u003cp\u003eThe polymer is a pure polymer that is FDA approved.  There are no additives u\u003cspan\u003esed in the chemical manufacturing or extrusion processes.  Nylon 680 uses taulman3D's processes to accommodate it's use in FFM style\/type 3D Printers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNylon 680 is designed to be dishwasher safe, so that it can survive boiling water and steam\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOne other feature worth noting of this material is that its clarity allows for the relative ease of non-destructive evaluation of parts printed in Nylon 680 using a light table. Due to its clarity, users can see if a part has good adhesion on the inside of a part, where the infill meets the perimeter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost Process capability:\u003c\/strong\u003e\u003cbr\u003eNylon 680 is compatible with Ethylene oxide and Flash Steam post processing.\u003cbr\u003eNote ; Nylon is hygroscopic and any water based processing will require a longer dry time.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/taulman-nylon-680-3d-printer-filament-Canada.jpg?v=1487043298\" alt=\"taulman 680 nylon 3d printer filament Canada\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/taulman-nylon-680-3d-printer-filament-Canada-2.jpg?v=1487043324\" alt=\"taulman 680 nylon 3d printer filament Canada\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSTORAGE: \u003c\/strong\u003eOne large resealable bag with slider + an extra desiccant pack are \u003cstrong\u003eincluded\u003c\/strong\u003e with every spool. The bag and extra desiccant are a great way to safely store your filament spool when not in use. It keeps your filament bone dry \u0026amp; free from any dust or dirt particles, so it's always ready for your next print.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable with=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"15%\"\u003e \u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG\u003cspan\u003e (1.1 LB)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\"\u003e\n\u003ch3\u003e\n\u003cimg alt=\"3d printing temperature guideline\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-printing-temperature-guideline_pico.jpg?17244370916201715492\"\u003e Printing\u003cbr\u003eTemperature:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e250°C - 255°C\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003ePrint bed = Glass heated to 45C with coat of PVA.\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Taulman Nylon 680 Filament -2.85 mm FDA Material - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

Taulman Nylon 680 Filament -2.85 mm FDA Material

$64.99 CAD

Taulman3D Nylon 680 FDA Nylon is a high grade pure polymer that is FDA approved for indirect food contact! Taulman 680 was designed to print in the same temperature range as other taulman nylons. It is less pliable and more transparent than the Taulman 645 as it is intended to support many medical uses as well as non-destructive visual inspect...


More Info
Sold Out
Taulman Nylon Bridge 1.75mm - Pinkish Natural - 1kg
{"id":5808751313058,"title":"Taulman Nylon Bridge 1.75mm - Pinkish Natural - 1kg","handle":"taulman-nylon-bridge-1-75mm-pinkish-natural","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\" data-mce-style=\"font-size: x-large;\"\u003e\u003cstrong\u003eClearance:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe filament is under the clearance section just because the filament is having discoloration. It was supposed to be natural in color but it is pinkish natural in color. Otherwise everything would be fine about the filament.\u003c\/p\u003e\n\u003ch6\u003e\n\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003eBridge Nylon:\u003c\/span\u003e\n\u003c\/h6\u003e\n\u003cp\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003e\u003cbr\u003eDubbed \"\u003c\/span\u003e\u003cstrong\u003eBridge\u003c\/strong\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003e\" by our local St Louis testers as bridging the strength of nylon 645 together with the price of current ABS and PLA thermoplastics, allows any user the flexibility to determine the best choice in material for their printing needs.\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003eFrom our customers, we have logged and prioritized the most sought after features of a high strength printing material.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003e\u003cstrong\u003eAdherence to the Printing platform:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003eFirst, was the adherence to the Printing platform. Those that follow the use of nylon in posts, blogs and 3DP discussion rooms know of using garolite (LE) as a print surface. While this works well for all of taulman3D nylons, garolite is not always easy to acquire and even so, requires a properly cut section that fits each user's unit. Our thanks goes out to our chemical company for helping to change this requirement. The surface properties of most nylons is extremely slippery making adherence to the printing platform difficult. Our chemical company was able to make minor adjustments, to reduce the surface effect just slightly, thus allowing for the use of most PVA glues, either full strength or diluted. Initial testing shows that in some cases, the PVA was better with Bridge than garolite is with 618. Thus, some dilution was used. The specific PVA used in our labs is a very low cost \"ELMER'S Glue-All\" White PVA.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReduced water up-take:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003eNext was Reduced water up-take from local humidity. While it is not possible to eliminate the water uptake by nylon, it is possible to localize it to the surface through final processing changes. Therefore when printing, rather than water creating a subtle popping that can effect the surface finish, Bridge will hold the water to the outer portion resulting in a slight steam when wet. The result of this is that Bridge needs little or no drying in the winter and just needs to be warmed in the summer months. This is a manufacturing process that our extrusion house developed and added to our existing taulman3D processes.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReduced Shrinkage:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003eWe found that the same process that reduces water uptake also helps to reduce shrinkage. While nylon will always have a slightly higher amount than ABS, we were able to reduce it to an in\/in value less than our current nylons. These changes also led to a slight reduction in stringing as the extruded threads are a thicker melt.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNon-destructive evaluation:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003eNon-destructive evaluation of 3D Printed parts is a function of the transparency of Bridge. Like nylon 645, this transparency allows for visual inspection of printed parts. This is a combined request from our industrial and clinical customers. As noted early on, parts can be printed \"too fast\" for some polymers. While the outside of the part may look acceptable, a part printed too fast will not have internal fill material that actually adheres to the inside of the perimeter. With Bridge and nylon 645, Non-destructive evaluation is a simple visual verification.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCertified measure of strength:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003eWith this combination of advancements, taulman3D proceeded with a limited test run. From this initial test run, we printed test samples to be sent out to the St Louis test labs. A fully accredited testing facility supporting the central US. The lab reported a Tensile Stress PSI of 4,800 for Bridge when 3D printed.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/bb_480x480.png?v=1598037300\" alt=\"\" style=\"font-size: medium; display: block; margin-left: auto; margin-right: auto;\" data-mce-style=\"font-size: medium; display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/div\u003e","published_at":"2020-10-08T16:30:00-04:00","created_at":"2020-10-08T16:24:16-04:00","vendor":"Taulman","type":"Filaments","tags":["1.75mm","3D Printer Filament","Bridge","clearance filament","Filament","new-arrivals","Nylon","Nylon 1.75 mm","nylon bridge","Taulman","taulman filament"],"price":2499,"price_min":2499,"price_max":2499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36543643222178,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TAUL-FL-NYLBDG-1.75MM-1KG-PNKNTRL","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Taulman Nylon Bridge 1.75mm - Pinkish Natural - 1kg","public_title":null,"options":["Default Title"],"price":2499,"weight":1000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"688295584049","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/WhatsAppImage2020-10-08at4.31.41PM_2.jpg?v=1604091201","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/WhatsAppImage2020-10-08at4.31.41PM.jpg?v=1604091201","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/WhatsAppImage2020-10-08at4.31.41PM_1.jpg?v=1602189191"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/WhatsAppImage2020-10-08at4.31.41PM_2.jpg?v=1604091201","options":["Title"],"media":[{"alt":null,"id":11815635484834,"position":1,"preview_image":{"aspect_ratio":0.75,"height":1024,"width":768,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/WhatsAppImage2020-10-08at4.31.41PM_2.jpg?v=1602189190"},"aspect_ratio":0.75,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/WhatsAppImage2020-10-08at4.31.41PM_2.jpg?v=1602189190","width":768},{"alt":null,"id":11815635452066,"position":2,"preview_image":{"aspect_ratio":0.75,"height":1024,"width":768,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/WhatsAppImage2020-10-08at4.31.41PM.jpg?v=1602189190"},"aspect_ratio":0.75,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/WhatsAppImage2020-10-08at4.31.41PM.jpg?v=1602189190","width":768},{"alt":null,"id":11815635517602,"position":3,"preview_image":{"aspect_ratio":0.75,"height":1024,"width":768,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/WhatsAppImage2020-10-08at4.31.41PM_1.jpg?v=1602189191"},"aspect_ratio":0.75,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/WhatsAppImage2020-10-08at4.31.41PM_1.jpg?v=1602189191","width":768}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\" data-mce-style=\"font-size: x-large;\"\u003e\u003cstrong\u003eClearance:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe filament is under the clearance section just because the filament is having discoloration. It was supposed to be natural in color but it is pinkish natural in color. Otherwise everything would be fine about the filament.\u003c\/p\u003e\n\u003ch6\u003e\n\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003eBridge Nylon:\u003c\/span\u003e\n\u003c\/h6\u003e\n\u003cp\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003e\u003cbr\u003eDubbed \"\u003c\/span\u003e\u003cstrong\u003eBridge\u003c\/strong\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003e\" by our local St Louis testers as bridging the strength of nylon 645 together with the price of current ABS and PLA thermoplastics, allows any user the flexibility to determine the best choice in material for their printing needs.\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003eFrom our customers, we have logged and prioritized the most sought after features of a high strength printing material.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003e\u003cstrong\u003eAdherence to the Printing platform:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003eFirst, was the adherence to the Printing platform. Those that follow the use of nylon in posts, blogs and 3DP discussion rooms know of using garolite (LE) as a print surface. While this works well for all of taulman3D nylons, garolite is not always easy to acquire and even so, requires a properly cut section that fits each user's unit. Our thanks goes out to our chemical company for helping to change this requirement. The surface properties of most nylons is extremely slippery making adherence to the printing platform difficult. Our chemical company was able to make minor adjustments, to reduce the surface effect just slightly, thus allowing for the use of most PVA glues, either full strength or diluted. Initial testing shows that in some cases, the PVA was better with Bridge than garolite is with 618. Thus, some dilution was used. The specific PVA used in our labs is a very low cost \"ELMER'S Glue-All\" White PVA.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReduced water up-take:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003eNext was Reduced water up-take from local humidity. While it is not possible to eliminate the water uptake by nylon, it is possible to localize it to the surface through final processing changes. Therefore when printing, rather than water creating a subtle popping that can effect the surface finish, Bridge will hold the water to the outer portion resulting in a slight steam when wet. The result of this is that Bridge needs little or no drying in the winter and just needs to be warmed in the summer months. This is a manufacturing process that our extrusion house developed and added to our existing taulman3D processes.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReduced Shrinkage:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003eWe found that the same process that reduces water uptake also helps to reduce shrinkage. While nylon will always have a slightly higher amount than ABS, we were able to reduce it to an in\/in value less than our current nylons. These changes also led to a slight reduction in stringing as the extruded threads are a thicker melt.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNon-destructive evaluation:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003eNon-destructive evaluation of 3D Printed parts is a function of the transparency of Bridge. Like nylon 645, this transparency allows for visual inspection of printed parts. This is a combined request from our industrial and clinical customers. As noted early on, parts can be printed \"too fast\" for some polymers. While the outside of the part may look acceptable, a part printed too fast will not have internal fill material that actually adheres to the inside of the perimeter. With Bridge and nylon 645, Non-destructive evaluation is a simple visual verification.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCertified measure of strength:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\" data-mce-style=\"font-size: medium;\"\u003eWith this combination of advancements, taulman3D proceeded with a limited test run. From this initial test run, we printed test samples to be sent out to the St Louis test labs. A fully accredited testing facility supporting the central US. The lab reported a Tensile Stress PSI of 4,800 for Bridge when 3D printed.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/bb_480x480.png?v=1598037300\" alt=\"\" style=\"font-size: medium; display: block; margin-left: auto; margin-right: auto;\" data-mce-style=\"font-size: medium; display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/div\u003e"}
Taulman Nylon Bridge 1.75mm - Pinkish Natural - 1kg

Taulman Nylon Bridge 1.75mm - Pinkish Natural - 1kg

$24.99 CAD

Clearance: The filament is under the clearance section just because the filament is having discoloration. It was supposed to be natural in color but it is pinkish natural in color. Otherwise everything would be fine about the filament. Bridge Nylon: Dubbed "Bridge" by our local St Louis testers as bridging the strength of nylon 645 together wi...


More Info
{"id":546435072036,"title":"Taulman Nylon Bridge Black 1.75mm 1lb","handle":"nylon-bridge-3d-printer-filament-1-75-mm-black","description":"\u003cp\u003e\u003cspan\u003eDubbed \"\u003c\/span\u003e\u003cstrong\u003eBridge\u003c\/strong\u003e\u003cspan\u003e\" by our local St Louis testers as bridging the strength of nylon 645 together with the price of current ABS and PLA thermoplastics, allows any user the flexibility to determine the best choice in material for their printing needs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFrom our customers, we have logged and prioritized the most sought after features of a high strength printing material. These were in order:\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eA Lab certified measure of tensile strength.\u003cbr\u003eBetter Adherence to the Printing platform.\u003cbr\u003ePrice\u003cbr\u003eReduced water up-take from local humidity\u003cbr\u003eNon-destructive evaluation (Opacity)\u003cbr\u003eReduced Shrinkage\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003eBase Reference:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eStarting with our strongest base polymer used for a percentage of nylon 645, we began working all of these requests.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAdherence to the Printing platform:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eFirst, was the adherence to the Printing platform. Those that follow the use of nylon in posts, blogs and 3DP discussion rooms know of using garolite (LE) as a print surface. While this works well for all of taulman3D nylons, garolite is not always easy to acquire and even so, requires a properly cut section that fits each user's unit. Our thanks goes out to our chemical company for helping to change this requirement. The surface properties of most nylons is extremely slippery making adherence to the printing platform difficult. Our chemical company was able to make minor adjustments, to reduce the surface effect just slightly, thus allowing for the use of most PVA glues, either full strength or diluted. Initial testing shows that in some cases, the PVA was better with Bridge than garolite is with 618. Thus, some dilution was used. The specific PVA used in our labs is a very low cost \"ELMER'S Glue-All\" White PVA.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReduced water up-take:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eNext was Reduced water up-take from local humidity. While it is not possible to eliminate the water uptake by nylon, it is possible to localize it to the surface through final processing changes. Therefore when printing, rather than water creating a subtle popping that can effect the surface finish, Bridge will hold the water to the outer portion resulting in a slight steam when wet. The result of this is that Bridge needs little or no drying in the winter and just needs to be warmed in the summer months. This is a manufacturing process that our extrusion house developed and added to our existing taulman3D processes.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReduced Shrinkage:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eWe found that the same process that reduces water uptake also helps to reduce shrinkage. While nylon will always have a slightly higher amount than ABS, we were able to reduce it to an in\/in value less than our current nylons. These changes also led to a slight reduction in stringing as the extruded threads are a thicker melt.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNon-destructive evaluation:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eNon-destructive evaluation of 3D Printed parts is a function of the transparency of Bridge. Like nylon 645, this transparency allows for visual inspection of printed parts. This is a combined request from our industrial and clinical customers. As noted early on, parts can be printed \"too fast\" for some polymers. While the outside of the part may look acceptable, a part printed too fast will not have internal fill material that actually adheres to the inside of the perimeter. With Bridge and nylon 645, Non-destructive evaluation is a simple visual verification.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCertified measure of strength:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eWith this combination of advancements, taulman3D proceeded with a limited test run. From this initial test run, we printed test samples to be sent out to the St Louis test labs. A fully accredited testing facility supporting the central US. The lab reported a Tensile Stress PSI of 4,800 for Bridge when 3D printed. See below.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"500\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/6r6DqLoRoCA\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\"\u003e\n\u003ch3\u003e Printing\u003cbr\u003eTemperature:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e250°C - 265°C\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNozzle = any size\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrint speed = 80% of ABS speeds\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRetraction = 1mm\/.1mm nozzle or for a .5mm nozzle = 5mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrint bed = Glass heated to 45C with coat of PVA.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2017-01-29T12:28:34-05:00","created_at":"2018-03-15T17:35:51-04:00","vendor":"Taulman","type":"Filaments","tags":["1.75mm","3D Printer Filament","Bridge","Filament","new-arrivals","Nylon","Nylon 1.75 mm","Taulman"],"price":2799,"price_min":2799,"price_max":2799,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7103616614436,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FL0012-Bridge-1.75mm- black","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taulman Nylon Bridge Black 1.75mm 1lb","public_title":null,"options":["Default Title"],"price":2799,"weight":800,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"688295584889","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-bridge-black-1.75mm-1lb.jpg?v=1594469253"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-bridge-black-1.75mm-1lb.jpg?v=1594469253","options":["Title"],"media":[{"alt":"Taulman Nylon Bridge Black 1.75mm 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":798269800579,"position":1,"preview_image":{"aspect_ratio":0.929,"height":198,"width":184,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-bridge-black-1.75mm-1lb.jpg?v=1569071245"},"aspect_ratio":0.929,"height":198,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-bridge-black-1.75mm-1lb.jpg?v=1569071245","width":184}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eDubbed \"\u003c\/span\u003e\u003cstrong\u003eBridge\u003c\/strong\u003e\u003cspan\u003e\" by our local St Louis testers as bridging the strength of nylon 645 together with the price of current ABS and PLA thermoplastics, allows any user the flexibility to determine the best choice in material for their printing needs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFrom our customers, we have logged and prioritized the most sought after features of a high strength printing material. These were in order:\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eA Lab certified measure of tensile strength.\u003cbr\u003eBetter Adherence to the Printing platform.\u003cbr\u003ePrice\u003cbr\u003eReduced water up-take from local humidity\u003cbr\u003eNon-destructive evaluation (Opacity)\u003cbr\u003eReduced Shrinkage\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003eBase Reference:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eStarting with our strongest base polymer used for a percentage of nylon 645, we began working all of these requests.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAdherence to the Printing platform:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eFirst, was the adherence to the Printing platform. Those that follow the use of nylon in posts, blogs and 3DP discussion rooms know of using garolite (LE) as a print surface. While this works well for all of taulman3D nylons, garolite is not always easy to acquire and even so, requires a properly cut section that fits each user's unit. Our thanks goes out to our chemical company for helping to change this requirement. The surface properties of most nylons is extremely slippery making adherence to the printing platform difficult. Our chemical company was able to make minor adjustments, to reduce the surface effect just slightly, thus allowing for the use of most PVA glues, either full strength or diluted. Initial testing shows that in some cases, the PVA was better with Bridge than garolite is with 618. Thus, some dilution was used. The specific PVA used in our labs is a very low cost \"ELMER'S Glue-All\" White PVA.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReduced water up-take:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eNext was Reduced water up-take from local humidity. While it is not possible to eliminate the water uptake by nylon, it is possible to localize it to the surface through final processing changes. Therefore when printing, rather than water creating a subtle popping that can effect the surface finish, Bridge will hold the water to the outer portion resulting in a slight steam when wet. The result of this is that Bridge needs little or no drying in the winter and just needs to be warmed in the summer months. This is a manufacturing process that our extrusion house developed and added to our existing taulman3D processes.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReduced Shrinkage:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eWe found that the same process that reduces water uptake also helps to reduce shrinkage. While nylon will always have a slightly higher amount than ABS, we were able to reduce it to an in\/in value less than our current nylons. These changes also led to a slight reduction in stringing as the extruded threads are a thicker melt.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNon-destructive evaluation:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eNon-destructive evaluation of 3D Printed parts is a function of the transparency of Bridge. Like nylon 645, this transparency allows for visual inspection of printed parts. This is a combined request from our industrial and clinical customers. As noted early on, parts can be printed \"too fast\" for some polymers. While the outside of the part may look acceptable, a part printed too fast will not have internal fill material that actually adheres to the inside of the perimeter. With Bridge and nylon 645, Non-destructive evaluation is a simple visual verification.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCertified measure of strength:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eWith this combination of advancements, taulman3D proceeded with a limited test run. From this initial test run, we printed test samples to be sent out to the St Louis test labs. A fully accredited testing facility supporting the central US. The lab reported a Tensile Stress PSI of 4,800 for Bridge when 3D printed. See below.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"500\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/6r6DqLoRoCA\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\"\u003e\n\u003ch3\u003e Printing\u003cbr\u003eTemperature:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e250°C - 265°C\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNozzle = any size\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrint speed = 80% of ABS speeds\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRetraction = 1mm\/.1mm nozzle or for a .5mm nozzle = 5mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrint bed = Glass heated to 45C with coat of PVA.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFor ALL Nylon based materials, users should turn \"OFF\" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}
Taulman Nylon Bridge Black 1.75mm 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

Taulman Nylon Bridge Black 1.75mm 1lb

$27.99 CAD

Dubbed "Bridge" by our local St Louis testers as bridging the strength of nylon 645 together with the price of current ABS and PLA thermoplastics, allows any user the flexibility to determine the best choice in material for their printing needs.From our customers, we have logged and prioritized the most sought after features of a high strength p...


More Info
{"id":5622739501218,"title":"Taulman Nylon Bridge filament 1.75mm - various colors","handle":"taulman-nylon-bridge-1-75mm-1kg-various-colors","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eBridge Nylon\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003e\u003cbr\u003eDubbed \"\u003c\/span\u003e\u003cstrong\u003eBridge\u003c\/strong\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003e\" by our local St Louis testers as bridging the strength of nylon 645 together with the price of current ABS and PLA thermoplastics, allows any user the flexibility to determine the best choice in material for their printing needs.\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003eFrom our customers, we have logged and prioritized the most sought after features of a high strength printing material.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003e\u003cstrong\u003eAdherence to the Printing platform:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003eFirst, was the adherence to the Printing platform. Those that follow the use of nylon in posts, blogs and 3DP discussion rooms know of using garolite (LE) as a print surface. While this works well for all of taulman3D nylons, garolite is not always easy to acquire and even so, requires a properly cut section that fits each user's unit. Our thanks goes out to our chemical company for helping to change this requirement. The surface properties of most nylons is extremely slippery making adherence to the printing platform difficult. Our chemical company was able to make minor adjustments, to reduce the surface effect just slightly, thus allowing for the use of most PVA glues, either full strength or diluted. Initial testing shows that in some cases, the PVA was better with Bridge than garolite is with 618. Thus, some dilution was used. The specific PVA used in our labs is a very low cost \"ELMER'S Glue-All\" White PVA.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReduced water up-take:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003eNext was Reduced water up-take from local humidity. While it is not possible to eliminate the water uptake by nylon, it is possible to localize it to the surface through final processing changes. Therefore when printing, rather than water creating a subtle popping that can effect the surface finish, Bridge will hold the water to the outer portion resulting in a slight steam when wet. The result of this is that Bridge needs little or no drying in the winter and just needs to be warmed in the summer months. This is a manufacturing process that our extrusion house developed and added to our existing taulman3D processes.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReduced Shrinkage:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003eWe found that the same process that reduces water uptake also helps to reduce shrinkage. While nylon will always have a slightly higher amount than ABS, we were able to reduce it to an in\/in value less than our current nylons. These changes also led to a slight reduction in stringing as the extruded threads are a thicker melt.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNon-destructive evaluation:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003eNon-destructive evaluation of 3D Printed parts is a function of the transparency of Bridge. Like nylon 645, this transparency allows for visual inspection of printed parts. This is a combined request from our industrial and clinical customers. As noted early on, parts can be printed \"too fast\" for some polymers. While the outside of the part may look acceptable, a part printed too fast will not have internal fill material that actually adheres to the inside of the perimeter. With Bridge and nylon 645, Non-destructive evaluation is a simple visual verification.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCertified measure of strength:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003eWith this combination of advancements, taulman3D proceeded with a limited test run. From this initial test run, we printed test samples to be sent out to the St Louis test labs. A fully accredited testing facility supporting the central US. The lab reported a Tensile Stress PSI of 4,800 for Bridge when 3D printed.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/bb_480x480.png?v=1598037300\" alt=\"\" style=\"font-size: medium; display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/div\u003e","published_at":"2020-08-21T15:20:10-04:00","created_at":"2020-08-21T15:12:00-04:00","vendor":"Taulman","type":"Filaments","tags":["1.75mm","3D Printer Filament","Bridge","Filament","new-arrivals","Nylon","Nylon 1.75 mm","nylon bridge","Taulman","taulman filament"],"price":2499,"price_min":2499,"price_max":4795,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35799895441570,"title":"Black - 1kg","option1":"Black - 1kg","option2":null,"option3":null,"sku":"TAUL-FL-NYLBDG-1.75MM-1KG-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":18734347518114,"product_id":5622739501218,"position":1,"created_at":"2020-08-21T15:16:56-04:00","updated_at":"2020-08-21T15:16:56-04:00","alt":null,"width":800,"height":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/1kg-bridge-black-2_orig.jpg?v=1598037416","variant_ids":[35799895441570]},"available":true,"name":"Taulman Nylon Bridge filament 1.75mm - various colors - Black - 1kg","public_title":"Black - 1kg","options":["Black - 1kg"],"price":4795,"weight":2000,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"688295584889","featured_media":{"alt":null,"id":10909011574946,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/1kg-bridge-black-2_orig.jpg?v=1598037416"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":35799895474338,"title":"Natural - 1kg","option1":"Natural - 1kg","option2":null,"option3":null,"sku":"TAUL-FL-NYLBDG-1.75MM-1KG-NTRL","requires_shipping":true,"taxable":true,"featured_image":{"id":18734347485346,"product_id":5622739501218,"position":2,"created_at":"2020-08-21T15:16:55-04:00","updated_at":"2020-08-21T15:16:56-04:00","alt":null,"width":800,"height":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/1kg-bridge-nat-2_orig.jpg?v=1598037416","variant_ids":[35799895474338]},"available":true,"name":"Taulman Nylon Bridge filament 1.75mm - various colors - Natural - 1kg","public_title":"Natural - 1kg","options":["Natural - 1kg"],"price":4795,"weight":2000,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":null,"id":10909011607714,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/1kg-bridge-nat-2_orig.jpg?v=1598037415"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":36471498473634,"title":"Natural - 0.5kg","option1":"Natural - 0.5kg","option2":null,"option3":null,"sku":"TAUL-FL-NYLBDG-1.75MM-0.5KG-NTRL","requires_shipping":true,"taxable":true,"featured_image":{"id":19548820701346,"product_id":5622739501218,"position":3,"created_at":"2020-10-02T17:58:44-04:00","updated_at":"2020-10-02T17:58:44-04:00","alt":null,"width":800,"height":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-nylon-bridge.jpg?v=1601675924","variant_ids":[36471498473634]},"available":true,"name":"Taulman Nylon Bridge filament 1.75mm - various colors - Natural - 0.5kg","public_title":"Natural - 0.5kg","options":["Natural - 0.5kg"],"price":2499,"weight":2000,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":null,"id":11724045811874,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-nylon-bridge.jpg?v=1601675924"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/1kg-bridge-black-2_orig.jpg?v=1598037416","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/1kg-bridge-nat-2_orig.jpg?v=1598037416","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-nylon-bridge.jpg?v=1601675924"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/1kg-bridge-black-2_orig.jpg?v=1598037416","options":["Color"],"media":[{"alt":null,"id":10909011574946,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/1kg-bridge-black-2_orig.jpg?v=1598037416"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/1kg-bridge-black-2_orig.jpg?v=1598037416","width":800},{"alt":null,"id":10909011607714,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/1kg-bridge-nat-2_orig.jpg?v=1598037415"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/1kg-bridge-nat-2_orig.jpg?v=1598037415","width":800},{"alt":null,"id":11724045811874,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-nylon-bridge.jpg?v=1601675924"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/taulman-nylon-bridge.jpg?v=1601675924","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eBridge Nylon\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003e\u003cbr\u003eDubbed \"\u003c\/span\u003e\u003cstrong\u003eBridge\u003c\/strong\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003e\" by our local St Louis testers as bridging the strength of nylon 645 together with the price of current ABS and PLA thermoplastics, allows any user the flexibility to determine the best choice in material for their printing needs.\u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003eFrom our customers, we have logged and prioritized the most sought after features of a high strength printing material.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003e\u003cstrong\u003eAdherence to the Printing platform:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003eFirst, was the adherence to the Printing platform. Those that follow the use of nylon in posts, blogs and 3DP discussion rooms know of using garolite (LE) as a print surface. While this works well for all of taulman3D nylons, garolite is not always easy to acquire and even so, requires a properly cut section that fits each user's unit. Our thanks goes out to our chemical company for helping to change this requirement. The surface properties of most nylons is extremely slippery making adherence to the printing platform difficult. Our chemical company was able to make minor adjustments, to reduce the surface effect just slightly, thus allowing for the use of most PVA glues, either full strength or diluted. Initial testing shows that in some cases, the PVA was better with Bridge than garolite is with 618. Thus, some dilution was used. The specific PVA used in our labs is a very low cost \"ELMER'S Glue-All\" White PVA.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReduced water up-take:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003eNext was Reduced water up-take from local humidity. While it is not possible to eliminate the water uptake by nylon, it is possible to localize it to the surface through final processing changes. Therefore when printing, rather than water creating a subtle popping that can effect the surface finish, Bridge will hold the water to the outer portion resulting in a slight steam when wet. The result of this is that Bridge needs little or no drying in the winter and just needs to be warmed in the summer months. This is a manufacturing process that our extrusion house developed and added to our existing taulman3D processes.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReduced Shrinkage:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003eWe found that the same process that reduces water uptake also helps to reduce shrinkage. While nylon will always have a slightly higher amount than ABS, we were able to reduce it to an in\/in value less than our current nylons. These changes also led to a slight reduction in stringing as the extruded threads are a thicker melt.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNon-destructive evaluation:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003eNon-destructive evaluation of 3D Printed parts is a function of the transparency of Bridge. Like nylon 645, this transparency allows for visual inspection of printed parts. This is a combined request from our industrial and clinical customers. As noted early on, parts can be printed \"too fast\" for some polymers. While the outside of the part may look acceptable, a part printed too fast will not have internal fill material that actually adheres to the inside of the perimeter. With Bridge and nylon 645, Non-destructive evaluation is a simple visual verification.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCertified measure of strength:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan size=\"3\" style=\"font-size: medium;\"\u003eWith this combination of advancements, taulman3D proceeded with a limited test run. From this initial test run, we printed test samples to be sent out to the St Louis test labs. A fully accredited testing facility supporting the central US. The lab reported a Tensile Stress PSI of 4,800 for Bridge when 3D printed.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/bb_480x480.png?v=1598037300\" alt=\"\" style=\"font-size: medium; display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/div\u003e"}
Taulman Nylon Bridge filament 1.75mm - various colors

Taulman Nylon Bridge filament 1.75mm - various colors

$47.95 CAD

Bridge NylonDubbed "Bridge" by our local St Louis testers as bridging the strength of nylon 645 together with the price of current ABS and PLA thermoplastics, allows any user the flexibility to determine the best choice in material for their printing needs.  From our customers, we have logged and prioritized the most sought after features of a h...

Color
Black - 1kg
Natural - 1kg
Natural - 0.5kg

More Info
Sale
Taulman PCTPE - Natural - 2.85 mm 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services
Taulman PCTPE - Natural - 2.85 mm 1lb

Filaments

$32.99 CAD $42.99 CAD
{"id":8058625227,"title":"Taulman PCTPE - Natural - 2.85 mm 1lb","handle":"pctpe-filament-natural-2-85-mm","description":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cspan style=\"font-family: Arial;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003ePCTPE stands for \"Plasticized Copolyamide TPE\" or a chemical co-polymer of highly flexible nylon and TPE (thermoplastic elastomer) .  The material  has many unique characteristics that enable any user to print a highly flexible part combined with the added durability of our nylon polymers.  This combination of polymers was developed specifically to allow anyone using current FFF 3D Printers to print parts from durable prosthesis to complete cosplay wearable outfits, cell phone enclosures as well as highly flexible utility\/industrial parts.  The flexibility of PCTPE means that the end parts will have the smooth lustrous texture of nylon, the added flexibility offered by a rubber like TPE, yet maintain the high durability and non-delaminating benefits of all taulman3D Printing materials.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003e\u003cstrong\u003eThe list of features includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProven performance = Tested worldwide by the 3D Printing community - summer of 2014.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003ePrints on bowdens or direct drive extruder. = From 1.75mm \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003ePrint temperature = 235C - 242C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eLow shrinkage = prints on glass with a 50% water\/PVA glaze heated to 40C \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuper Layer to layer bonding that allows for single perimeter walls to be folded along thread axis.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003eTakes on any acid based color dye (RITT) very fast = 5 min @ 140F\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eTakes on acid based antimicrobial coatings for footwear and prosthetic.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003eColor = Bright White\/reflective Nylon surface\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eTensile PSI = 5,043\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eModulus PSI = 10,954\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eElongation @ Break = 497%+\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications : \u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 770px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; margin-bottom: 1em; word-spacing: 0px; white-space: normal; border-collapse: collapse; box-sizing: border-box; border-spacing: 0px; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIAMETER:\u003c\/strong\u003e1.75 MM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL DIAMETER :\u003c\/strong\u003e12.6 CM (4.96 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL WIDTH : \u003c\/strong\u003e7 CM (2.75 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL HUB HOLE:\u003c\/strong\u003e1.9 CM (0.74 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG (1 LB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSHIPPING WEIGHT:\u003c\/strong\u003e0.6 KG (1.32 LB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOLOR \u003c\/strong\u003eNATURAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMANUFACTURER \u003c\/strong\u003eTaulman 3D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOUNTRY \u003c\/strong\u003eU.S.A\u003cstrong\u003eVACUUM PACKED\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eNO  Bag \u003cstrong\u003eDESICCANT\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSuper layer to layer Bonding\u003c\/strong\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e- PCTPE ensures that you do not need to use an enclosure just to get excellent layer bonding of parts from 100mm to 1,000mm+.  With PCTPE the layer bonding will allow you to print single perimeter walls and bend or fold  along the printed axis without delamination or separation\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWearable Texture\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e- As nylon is known to be a comfortable material to the touch, we made sure that the 3D Printed texture of PCTPE was just as smooth to the touch as any wearable nylon.  This lustrous texture is key to making new wearable objects that flow with body movements.  In addition to the lustrous texture, the flexibility of PCTPE is more accommodating for complex wearable designs.\u003c\/p\u003e\n\u003cdiv class=\"mceTemp\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\"\u003e\u003cimg class=\"size-full wp-image-6634\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\" alt=\"tualman-material-selections\" width=\"834\" height=\"672\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003etualman-material-selections\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2017-01-29T12:28:28-05:00","created_at":"2017-01-29T12:28:28-05:00","vendor":"Taulman","type":"Filaments","tags":["2.85","230","3D Printer Filament","3mm","Filament","Flexible Filaments 3 mm \/ 2.85 mm","Natural","Nylon","PCTPE","PLA","Taulman"],"price":3299,"price_min":3299,"price_max":3299,"available":true,"price_varies":false,"compare_at_price":4299,"compare_at_price_min":4299,"compare_at_price_max":4299,"compare_at_price_varies":false,"variants":[{"id":26393930955,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FL0012-PCTPE-Taul -2.85","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taulman PCTPE - Natural - 2.85 mm 1lb","public_title":null,"options":["Default Title"],"price":3299,"weight":800,"compare_at_price":4299,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001197","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/pctpe_46e044a4-ebb8-4b78-a914-071dcfd11fb8.png?v=1594464428"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/pctpe_46e044a4-ebb8-4b78-a914-071dcfd11fb8.png?v=1594464428","options":["Title"],"media":[{"alt":"Taulman PCTPE - Natural - 2.85 mm 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":94742708260,"position":1,"preview_image":{"aspect_ratio":1.037,"height":600,"width":622,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/pctpe_46e044a4-ebb8-4b78-a914-071dcfd11fb8.png?v=1568829411"},"aspect_ratio":1.037,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/pctpe_46e044a4-ebb8-4b78-a914-071dcfd11fb8.png?v=1568829411","width":622}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cspan style=\"font-family: Arial;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003ePCTPE stands for \"Plasticized Copolyamide TPE\" or a chemical co-polymer of highly flexible nylon and TPE (thermoplastic elastomer) .  The material  has many unique characteristics that enable any user to print a highly flexible part combined with the added durability of our nylon polymers.  This combination of polymers was developed specifically to allow anyone using current FFF 3D Printers to print parts from durable prosthesis to complete cosplay wearable outfits, cell phone enclosures as well as highly flexible utility\/industrial parts.  The flexibility of PCTPE means that the end parts will have the smooth lustrous texture of nylon, the added flexibility offered by a rubber like TPE, yet maintain the high durability and non-delaminating benefits of all taulman3D Printing materials.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003e\u003cstrong\u003eThe list of features includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProven performance = Tested worldwide by the 3D Printing community - summer of 2014.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003ePrints on bowdens or direct drive extruder. = From 1.75mm \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003ePrint temperature = 235C - 242C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eLow shrinkage = prints on glass with a 50% water\/PVA glaze heated to 40C \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuper Layer to layer bonding that allows for single perimeter walls to be folded along thread axis.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003eTakes on any acid based color dye (RITT) very fast = 5 min @ 140F\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eTakes on acid based antimicrobial coatings for footwear and prosthetic.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003eColor = Bright White\/reflective Nylon surface\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eTensile PSI = 5,043\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eModulus PSI = 10,954\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eElongation @ Break = 497%+\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications : \u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 770px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; margin-bottom: 1em; word-spacing: 0px; white-space: normal; border-collapse: collapse; box-sizing: border-box; border-spacing: 0px; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIAMETER:\u003c\/strong\u003e1.75 MM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL DIAMETER :\u003c\/strong\u003e12.6 CM (4.96 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL WIDTH : \u003c\/strong\u003e7 CM (2.75 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL HUB HOLE:\u003c\/strong\u003e1.9 CM (0.74 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG (1 LB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSHIPPING WEIGHT:\u003c\/strong\u003e0.6 KG (1.32 LB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOLOR \u003c\/strong\u003eNATURAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMANUFACTURER \u003c\/strong\u003eTaulman 3D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOUNTRY \u003c\/strong\u003eU.S.A\u003cstrong\u003eVACUUM PACKED\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eNO  Bag \u003cstrong\u003eDESICCANT\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSuper layer to layer Bonding\u003c\/strong\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e- PCTPE ensures that you do not need to use an enclosure just to get excellent layer bonding of parts from 100mm to 1,000mm+.  With PCTPE the layer bonding will allow you to print single perimeter walls and bend or fold  along the printed axis without delamination or separation\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWearable Texture\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e- As nylon is known to be a comfortable material to the touch, we made sure that the 3D Printed texture of PCTPE was just as smooth to the touch as any wearable nylon.  This lustrous texture is key to making new wearable objects that flow with body movements.  In addition to the lustrous texture, the flexibility of PCTPE is more accommodating for complex wearable designs.\u003c\/p\u003e\n\u003cdiv class=\"mceTemp\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\"\u003e\u003cimg class=\"size-full wp-image-6634\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\" alt=\"tualman-material-selections\" width=\"834\" height=\"672\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003etualman-material-selections\u003c\/p\u003e\n\u003c\/div\u003e"}
Taulman PCTPE - Natural - 2.85 mm 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

Taulman PCTPE - Natural - 2.85 mm 1lb

$32.99 CAD

  PCTPE stands for "Plasticized Copolyamide TPE" or a chemical co-polymer of highly flexible nylon and TPE (thermoplastic elastomer) .  The material  has many unique characteristics that enable any user to print a highly flexible part combined with the added durability of our nylon polymers.  This combination of polymers was developed specifica...


More Info
Sale
Taulman PCTPE Filament - NATURAL-1.75mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services
Taulman PCTPE Filament - NATURAL-1.75mm

Filaments

$32.99 CAD $42.99 CAD
{"id":8058625163,"title":"Taulman PCTPE Filament - NATURAL-1.75mm","handle":"pctpe-filament-natural-1-75mm","description":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cspan style=\"font-family: Arial;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003ePCTPE stands for \"Plasticized Copolyamide TPE\" or a chemical co-polymer of highly flexible nylon and TPE (thermoplastic elastomer) .  The material  has many unique characteristics that enable any user to print a highly flexible part combined with the added durability of our nylon polymers.  This combination of polymers was developed specifically to allow anyone using current FFF 3D Printers to print parts from durable prosthesis to complete cosplay wearable outfits, cell phone enclosures as well as highly flexible utility\/industrial parts.  The flexibility of PCTPE means that the end parts will have the smooth lustrous texture of nylon, the added flexibility offered by a rubber like TPE, yet maintain the high durability and non-delaminating benefits of all taulman3D Printing materials.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003e\u003cstrong\u003eThe list of features includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProven performance = Tested worldwide by the 3D Printing community - summer of 2014.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003ePrints on bowdens or direct drive extruder. = From 1.75mm \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003ePrint temperature = 235C - 242C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eLow shrinkage = prints on glass with a 50% water\/PVA glaze heated to 40C \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuper Layer to layer bonding that allows for single perimeter walls to be folded along thread axis.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003eTakes on any acid based color dye (RITT) very fast = 5 min @ 140F\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eTakes on acid based antimicrobial coatings for footwear and prosthetic.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003eColor = Bright White\/reflective Nylon surface\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eTensile PSI = 5,043\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eModulus PSI = 10,954\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eElongation @ Break = 497%+\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications : \u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 770px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; margin-bottom: 1em; word-spacing: 0px; white-space: normal; border-collapse: collapse; box-sizing: border-box; border-spacing: 0px; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIAMETER:\u003c\/strong\u003e1.75 MM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL DIAMETER :\u003c\/strong\u003e12.6 CM (4.96 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL WIDTH : \u003c\/strong\u003e7 CM (2.75 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL HUB HOLE:\u003c\/strong\u003e1.9 CM (0.74 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG (1 LB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSHIPPING WEIGHT:\u003c\/strong\u003e0.6 KG (1.32 LB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOLOR \u003c\/strong\u003eNATURAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMANUFACTURER \u003c\/strong\u003eTaulman 3D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOUNTRY \u003c\/strong\u003eU.S.A\u003cstrong\u003eVACUUM PACKED\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eNO  Bag \u003cstrong\u003eDESICCANT\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSuper layer to layer Bonding\u003c\/strong\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e- PCTPE ensures that you do not need to use an enclosure just to get excellent layer bonding of parts from 100mm to 1,000mm+.  With PCTPE the layer bonding will allow you to print single perimeter walls and bend or fold  along the printed axis without delamination or separation\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWearable Texture\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e- As nylon is known to be a comfortable material to the touch, we made sure that the 3D Printed texture of PCTPE was just as smooth to the touch as any wearable nylon.  This lustrous texture is key to making new wearable objects that flow with body movements.  In addition to the lustrous texture, the flexibility of PCTPE is more accommodating for complex wearable designs.\u003c\/p\u003e\n\u003cdiv class=\"mceTemp\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\"\u003e\u003cimg class=\"size-full wp-image-6634\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\" alt=\"tualman-material-selections\" width=\"834\" height=\"672\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003etualman-material-selections\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2017-01-29T12:28:27-05:00","created_at":"2017-01-29T12:28:27-05:00","vendor":"Taulman","type":"Filaments","tags":["1.75","1.75mm","230","3D Printer Filament","Filament","Flexible Filaments 1.75 mm","Natural","Nylon","PCTPE","PLA","Taulman"],"price":3299,"price_min":3299,"price_max":3299,"available":true,"price_varies":false,"compare_at_price":4299,"compare_at_price_min":4299,"compare_at_price_max":4299,"compare_at_price_varies":false,"variants":[{"id":26393930891,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FL0012-PCTPE-Taul -1.75","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taulman PCTPE Filament - NATURAL-1.75mm","public_title":null,"options":["Default Title"],"price":3299,"weight":800,"compare_at_price":4299,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"688295584254","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/pctpe.png?v=1594464427"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/pctpe.png?v=1594464427","options":["Title"],"media":[{"alt":"Taulman PCTPE Filament - NATURAL-1.75mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":94742675492,"position":1,"preview_image":{"aspect_ratio":1.037,"height":600,"width":622,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/pctpe.png?v=1568829411"},"aspect_ratio":1.037,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/pctpe.png?v=1568829411","width":622}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cspan style=\"font-family: Arial;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003ePCTPE stands for \"Plasticized Copolyamide TPE\" or a chemical co-polymer of highly flexible nylon and TPE (thermoplastic elastomer) .  The material  has many unique characteristics that enable any user to print a highly flexible part combined with the added durability of our nylon polymers.  This combination of polymers was developed specifically to allow anyone using current FFF 3D Printers to print parts from durable prosthesis to complete cosplay wearable outfits, cell phone enclosures as well as highly flexible utility\/industrial parts.  The flexibility of PCTPE means that the end parts will have the smooth lustrous texture of nylon, the added flexibility offered by a rubber like TPE, yet maintain the high durability and non-delaminating benefits of all taulman3D Printing materials.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003e\u003cstrong\u003eThe list of features includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProven performance = Tested worldwide by the 3D Printing community - summer of 2014.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003ePrints on bowdens or direct drive extruder. = From 1.75mm \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003ePrint temperature = 235C - 242C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eLow shrinkage = prints on glass with a 50% water\/PVA glaze heated to 40C \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuper Layer to layer bonding that allows for single perimeter walls to be folded along thread axis.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003eTakes on any acid based color dye (RITT) very fast = 5 min @ 140F\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eTakes on acid based antimicrobial coatings for footwear and prosthetic.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003eColor = Bright White\/reflective Nylon surface\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eTensile PSI = 5,043\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eModulus PSI = 10,954\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eElongation @ Break = 497%+\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications : \u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 770px; color: #4c4c4c; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Arial, 'Helvetica Neue', Helvetica, sans-serif; font-size: 13px; font-style: normal; font-weight: normal; margin-bottom: 1em; word-spacing: 0px; white-space: normal; border-collapse: collapse; box-sizing: border-box; border-spacing: 0px; orphans: 2; widows: 2; background-color: #ffffff; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIAMETER:\u003c\/strong\u003e1.75 MM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL DIAMETER :\u003c\/strong\u003e12.6 CM (4.96 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL WIDTH : \u003c\/strong\u003e7 CM (2.75 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL HUB HOLE:\u003c\/strong\u003e1.9 CM (0.74 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG (1 LB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSHIPPING WEIGHT:\u003c\/strong\u003e0.6 KG (1.32 LB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOLOR \u003c\/strong\u003eNATURAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMANUFACTURER \u003c\/strong\u003eTaulman 3D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOUNTRY \u003c\/strong\u003eU.S.A\u003cstrong\u003eVACUUM PACKED\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eNO  Bag \u003cstrong\u003eDESICCANT\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSuper layer to layer Bonding\u003c\/strong\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e- PCTPE ensures that you do not need to use an enclosure just to get excellent layer bonding of parts from 100mm to 1,000mm+.  With PCTPE the layer bonding will allow you to print single perimeter walls and bend or fold  along the printed axis without delamination or separation\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWearable Texture\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e- As nylon is known to be a comfortable material to the touch, we made sure that the 3D Printed texture of PCTPE was just as smooth to the touch as any wearable nylon.  This lustrous texture is key to making new wearable objects that flow with body movements.  In addition to the lustrous texture, the flexibility of PCTPE is more accommodating for complex wearable designs.\u003c\/p\u003e\n\u003cdiv class=\"mceTemp\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\"\u003e\u003cimg class=\"size-full wp-image-6634\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\" alt=\"tualman-material-selections\" width=\"834\" height=\"672\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003etualman-material-selections\u003c\/p\u003e\n\u003c\/div\u003e"}
Taulman PCTPE Filament - NATURAL-1.75mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

Taulman PCTPE Filament - NATURAL-1.75mm

$32.99 CAD

  PCTPE stands for "Plasticized Copolyamide TPE" or a chemical co-polymer of highly flexible nylon and TPE (thermoplastic elastomer) .  The material  has many unique characteristics that enable any user to print a highly flexible part combined with the added durability of our nylon polymers.  This combination of polymers was developed specifica...


More Info
Sale
Taulman T-Glase PETT-Blue-1.75mm 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services
Taulman T-Glase PETT-Blue-1.75mm 1lb

Filaments

$38.99 CAD $47.99 CAD
{"id":8053881547,"title":"Taulman T-Glase PETT-Blue-1.75mm 1lb","handle":"t-glass-pett-blue-1-75mm","description":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003eTaulman 3D \"T-Glase\" is an industrial high strength PETT material.\u003c\/p\u003e\n\u003cp\u003eT-Glase (or Tough Glass) (Tee-Glass) = was developed specifically by taulman3D to provide three major features to 3D Printing.  Low shrinkage, Higher strength than ABS and aesthetics beyond ABS and PLA due to it's enhanced optical properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePotential uses:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAs a replacement for any parts currently printed using ABS t-glase is 100% bonding layer to layer and parts will never \"split\" apart or \"de-laminate\" even in very large prints.\u003c\/li\u003e\n\u003cli\u003eGlass like qualities\u003c\/li\u003e\n\u003cli\u003eLight Pipe capable\u003c\/li\u003e\n\u003cli\u003eGlass clear when used with clear epoxies\u003c\/li\u003e\n\u003cli\u003eCrystal like reflections of the surface\u003c\/li\u003e\n\u003cli\u003eRed, Green, Blue and Black are translucent\u003c\/li\u003e\n\u003cli\u003eNow in Opaque White for a white that has a super gloss surface\u003c\/li\u003e\n\u003cli\u003e\"Non-shattering\" parts upon over-stress\u003c\/li\u003e\n\u003cli\u003eArchitectural Components\u003c\/li\u003e\n\u003cli\u003eJewelry\u003c\/li\u003e\n\u003cli\u003eGaming pc's\u003c\/li\u003e\n\u003cli\u003eLight catching designs of any type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTaulman t-glase is derived from the strongest PETT polymer combination available in the market. As t-glase is part of the Taulman3D family you can be sure that t-glase is a strong material! Where Taulman’s 618 and 645 nylons are somewhat bendable, t-glase is a fairly stiff material. When it comes to stiffness\/bend-ability, t-glase is more similar to ABS and PLA, rather than to Taulman’s 618 and 645 nylon filaments.\u003c\/p\u003e\n\u003cp\u003eT-Glase has excellent bridging features and has very little to zero warpage, which makes it an excellent material for printing large objects. Like Taulman 618 and 645, t-glase prints without any odors or fumes.\u003c\/p\u003e\n\u003cp\u003eTaulman t-glase is FDA approved, as t-glase is specifically made of FDA approved polymers for direct food contact\/containers.  This includes cups and other liquid storage parts as well as utensils\u003c\/p\u003e\n\u003cp\u003eT-glase is recyclable. While t-glase is not biodegradable like PLA, it is however 100% reclaimable in a compatible home filament extruder\/maker.\u003c\/p\u003e\n\u003cp\u003eTaulman3D t-glase’s clarity supports industry’s requirements for non-destructive evaluation of 3D Printed parts\u003c\/p\u003e\n\u003cp\u003eT-glase’s very low shrinkage makes printing large flat surfaces a breeze.  And it easily prints to acrylic, glass, Kapton and other platforms\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\"\u003e\u003cimg class=\"size-full wp-image-6634\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\" alt=\"tualman-material-selections\" width=\"834\" height=\"672\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003etualman-material-selections\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\u003ca href=\"http:\/\/taulman3d.com\/t-glase-optics.html\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #2a2a2a; font-size: xx-large;\"\u003eHacking t-glase to look more like glass!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"15%\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-filament-Weight_icon.png?10482698017282975306\" alt=\"3d filament net weight\" data-pin-nopin=\"true\"\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG (1.1 LB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-printing-temperature-guideline_pico.jpg?17244370916201715492\" alt=\"3d printing temperature guideline\"\u003e Printing\u003cbr\u003e Temperature:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e238°C - 245°C\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eWill print down to 230C and up to about 248C\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eT-glase prints easily to acrylic, glass, Kapton and other platforms\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNozzle = any size\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003ePrint speed = ABS speeds - slower for high detailed prints\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eRetraction = .5mm\/.1mm nozzle or for a .5mm nozzle = 2.5mm\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003ePrint bed = Glass heated to 45C with coat of PVA\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNOTE:  It is best \"NOT\" to let the bed cool to ambient, but only down to 35C in end of g-code, This will reduce glass breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003c\/div\u003e","published_at":"2017-01-28T12:33:15-05:00","created_at":"2017-01-28T12:33:15-05:00","vendor":"Taulman","type":"Filaments","tags":["1.75 mm","1.75mm","3D Printer Filament","ASA\/PET 1.75 mm","Clear","CoPolymer","Filament","Natural","PETT","PLA","T-Glass","Taulman","woo_import_1"],"price":3899,"price_min":3899,"price_max":3899,"available":true,"price_varies":false,"compare_at_price":4799,"compare_at_price_min":4799,"compare_at_price_max":4799,"compare_at_price_varies":false,"variants":[{"id":26354887371,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TAUL-FL-PETT-TGLASE-1.75MM-BLU","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taulman T-Glase PETT-Blue-1.75mm 1lb","public_title":null,"options":["Default Title"],"price":3899,"weight":1500,"compare_at_price":4799,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"688295584117","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/tglase-blue.png?v=1598471131"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/tglase-blue.png?v=1598471131","options":["Title"],"media":[{"alt":"Taulman T-Glase PETT-Blue-1.75mm 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":94662459428,"position":1,"preview_image":{"aspect_ratio":1.79,"height":447,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/tglase-blue.png?v=1568829354"},"aspect_ratio":1.79,"height":447,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/tglase-blue.png?v=1568829354","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003eTaulman 3D \"T-Glase\" is an industrial high strength PETT material.\u003c\/p\u003e\n\u003cp\u003eT-Glase (or Tough Glass) (Tee-Glass) = was developed specifically by taulman3D to provide three major features to 3D Printing.  Low shrinkage, Higher strength than ABS and aesthetics beyond ABS and PLA due to it's enhanced optical properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePotential uses:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAs a replacement for any parts currently printed using ABS t-glase is 100% bonding layer to layer and parts will never \"split\" apart or \"de-laminate\" even in very large prints.\u003c\/li\u003e\n\u003cli\u003eGlass like qualities\u003c\/li\u003e\n\u003cli\u003eLight Pipe capable\u003c\/li\u003e\n\u003cli\u003eGlass clear when used with clear epoxies\u003c\/li\u003e\n\u003cli\u003eCrystal like reflections of the surface\u003c\/li\u003e\n\u003cli\u003eRed, Green, Blue and Black are translucent\u003c\/li\u003e\n\u003cli\u003eNow in Opaque White for a white that has a super gloss surface\u003c\/li\u003e\n\u003cli\u003e\"Non-shattering\" parts upon over-stress\u003c\/li\u003e\n\u003cli\u003eArchitectural Components\u003c\/li\u003e\n\u003cli\u003eJewelry\u003c\/li\u003e\n\u003cli\u003eGaming pc's\u003c\/li\u003e\n\u003cli\u003eLight catching designs of any type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTaulman t-glase is derived from the strongest PETT polymer combination available in the market. As t-glase is part of the Taulman3D family you can be sure that t-glase is a strong material! Where Taulman’s 618 and 645 nylons are somewhat bendable, t-glase is a fairly stiff material. When it comes to stiffness\/bend-ability, t-glase is more similar to ABS and PLA, rather than to Taulman’s 618 and 645 nylon filaments.\u003c\/p\u003e\n\u003cp\u003eT-Glase has excellent bridging features and has very little to zero warpage, which makes it an excellent material for printing large objects. Like Taulman 618 and 645, t-glase prints without any odors or fumes.\u003c\/p\u003e\n\u003cp\u003eTaulman t-glase is FDA approved, as t-glase is specifically made of FDA approved polymers for direct food contact\/containers.  This includes cups and other liquid storage parts as well as utensils\u003c\/p\u003e\n\u003cp\u003eT-glase is recyclable. While t-glase is not biodegradable like PLA, it is however 100% reclaimable in a compatible home filament extruder\/maker.\u003c\/p\u003e\n\u003cp\u003eTaulman3D t-glase’s clarity supports industry’s requirements for non-destructive evaluation of 3D Printed parts\u003c\/p\u003e\n\u003cp\u003eT-glase’s very low shrinkage makes printing large flat surfaces a breeze.  And it easily prints to acrylic, glass, Kapton and other platforms\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\"\u003e\u003cimg class=\"size-full wp-image-6634\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\" alt=\"tualman-material-selections\" width=\"834\" height=\"672\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003etualman-material-selections\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\u003ca href=\"http:\/\/taulman3d.com\/t-glase-optics.html\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #2a2a2a; font-size: xx-large;\"\u003eHacking t-glase to look more like glass!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"15%\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-filament-Weight_icon.png?10482698017282975306\" alt=\"3d filament net weight\" data-pin-nopin=\"true\"\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG (1.1 LB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-printing-temperature-guideline_pico.jpg?17244370916201715492\" alt=\"3d printing temperature guideline\"\u003e Printing\u003cbr\u003e Temperature:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e238°C - 245°C\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eWill print down to 230C and up to about 248C\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eT-glase prints easily to acrylic, glass, Kapton and other platforms\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNozzle = any size\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003ePrint speed = ABS speeds - slower for high detailed prints\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eRetraction = .5mm\/.1mm nozzle or for a .5mm nozzle = 2.5mm\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003ePrint bed = Glass heated to 45C with coat of PVA\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNOTE:  It is best \"NOT\" to let the bed cool to ambient, but only down to 35C in end of g-code, This will reduce glass breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003c\/div\u003e"}
Taulman T-Glase PETT-Blue-1.75mm 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

Taulman T-Glase PETT-Blue-1.75mm 1lb

$38.99 CAD

Taulman 3D "T-Glase" is an industrial high strength PETT material. T-Glase (or Tough Glass) (Tee-Glass) = was developed specifically by taulman3D to provide three major features to 3D Printing.  Low shrinkage, Higher strength than ABS and aesthetics beyond ABS and PLA due to it's enhanced optical properties. Potential uses: As a replacement fo...


More Info
Sale
Taulman T-Glass PETT-Blue-2.85mm 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services
Taulman T-Glass PETT-Blue-2.85mm 1lb

Filaments

$38.99 CAD $47.99 CAD
{"id":8058625547,"title":"Taulman T-Glass PETT-Blue-2.85mm 1lb","handle":"t-glass-pett-blue-2-85mm","description":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003eTaulman 3D \"T-Glase\" is an industrial high strength PETT material.\u003c\/p\u003e\n\u003cp\u003eT-Glase (or Tough Glass) (Tee-Glass) = was developed specifically by taulman3D to provide three major features to 3D Printing.  Low shrinkage, Higher strength than ABS and aesthetics beyond ABS and PLA due to it's enhanced optical properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePotential uses:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAs a replacement for any parts currently printed using ABS t-glase is 100% bonding layer to layer and parts will never \"split\" apart or \"de-laminate\" even in very large prints.\u003c\/li\u003e\n\u003cli\u003eGlass like qualities\u003c\/li\u003e\n\u003cli\u003eLight Pipe capable\u003c\/li\u003e\n\u003cli\u003eGlass clear when used with clear epoxies\u003c\/li\u003e\n\u003cli\u003eCrystal like reflections of the surface\u003c\/li\u003e\n\u003cli\u003eRed, Green, Blue and Black are translucent\u003c\/li\u003e\n\u003cli\u003eNow in Opaque White for a white that has a super gloss surface\u003c\/li\u003e\n\u003cli\u003e\"Non-shattering\" parts upon over-stress\u003c\/li\u003e\n\u003cli\u003eArchitectural Components\u003c\/li\u003e\n\u003cli\u003eJewelry\u003c\/li\u003e\n\u003cli\u003eGaming pc's\u003c\/li\u003e\n\u003cli\u003eLight catching designs of any type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTaulman t-glase is derived from the strongest PETT polymer combination available in the market. As t-glase is part of the Taulman3D family you can be sure that t-glase is a strong material! Where Taulman’s 618 and 645 nylons are somewhat bendable, t-glase is a fairly stiff material. When it comes to stiffness\/bend-ability, t-glase is more similar to ABS and PLA, rather than to Taulman’s 618 and 645 nylon filaments.\u003c\/p\u003e\n\u003cp\u003eT-Glase has excellent bridging features and has very little to zero warpage, which makes it an excellent material for printing large objects. Like Taulman 618 and 645, t-glase prints without any odors or fumes.\u003c\/p\u003e\n\u003cp\u003eTaulman t-glase is FDA approved, as t-glase is specifically made of FDA approved polymers for direct food contact\/containers.  This includes cups and other liquid storage parts as well as utensils\u003c\/p\u003e\n\u003cp\u003eT-glase is recyclable. While t-glase is not biodegradable like PLA, it is however 100% reclaimable in a compatible home filament extruder\/maker.\u003c\/p\u003e\n\u003cp\u003eTaulman3D t-glase’s clarity supports industry’s requirements for non-destructive evaluation of 3D Printed parts\u003c\/p\u003e\n\u003cp\u003eT-glase’s very low shrinkage makes printing large flat surfaces a breeze.  And it easily prints to acrylic, glass, Kapton and other platforms\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\"\u003e\u003cimg class=\"size-full wp-image-6634\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\" alt=\"tualman-material-selections\" width=\"834\" height=\"672\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003etualman-material-selections\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\u003ca href=\"http:\/\/taulman3d.com\/t-glase-optics.html\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #2a2a2a; font-size: xx-large;\"\u003eHacking t-glase to look more like glass!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"15%\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-filament-Weight_icon.png?10482698017282975306\" alt=\"3d filament net weight\" data-pin-nopin=\"true\"\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG (1.1 LB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-printing-temperature-guideline_pico.jpg?17244370916201715492\" alt=\"3d printing temperature guideline\"\u003e Printing\u003cbr\u003e Temperature:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e238°C - 245°C\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eWill print down to 230C and up to about 248C\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eT-glase prints easily to acrylic, glass, Kapton and other platforms\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNozzle = any size\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003ePrint speed = ABS speeds - slower for high detailed prints\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eRetraction = .5mm\/.1mm nozzle or for a .5mm nozzle = 2.5mm\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003ePrint bed = Glass heated to 45C with coat of PVA\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNOTE:  It is best \"NOT\" to let the bed cool to ambient, but only down to 35C in end of g-code, This will reduce glass breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003c\/div\u003e","published_at":"2017-01-29T12:28:31-05:00","created_at":"2017-01-29T12:28:31-05:00","vendor":"Taulman","type":"Filaments","tags":["2.85","2.85mm","3 mm","3D Printer Filament","3mm","ASA\/PET 3 mm \/ 2.85 mm","Clear","CoPolymer","Filament","Natural","PETT","PLA","T-Glass","Taulman","woo_import_1"],"price":3899,"price_min":3899,"price_max":3899,"available":true,"price_varies":false,"compare_at_price":4799,"compare_at_price_min":4799,"compare_at_price_max":4799,"compare_at_price_varies":false,"variants":[{"id":26393931275,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FL0012-TGBluer-Taul -2.85","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taulman T-Glass PETT-Blue-2.85mm 1lb","public_title":null,"options":["Default Title"],"price":3899,"weight":800,"compare_at_price":4799,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001195","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/tglase-blue_001f7b77-d447-41b2-b85d-3d205cd99ad3.png?v=1594464430"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/tglase-blue_001f7b77-d447-41b2-b85d-3d205cd99ad3.png?v=1594464430","options":["Title"],"media":[{"alt":"Taulman T-Glass PETT-Blue-2.85mm 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":94742806564,"position":1,"preview_image":{"aspect_ratio":1.79,"height":447,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/tglase-blue_001f7b77-d447-41b2-b85d-3d205cd99ad3.png?v=1568829411"},"aspect_ratio":1.79,"height":447,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/tglase-blue_001f7b77-d447-41b2-b85d-3d205cd99ad3.png?v=1568829411","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003eTaulman 3D \"T-Glase\" is an industrial high strength PETT material.\u003c\/p\u003e\n\u003cp\u003eT-Glase (or Tough Glass) (Tee-Glass) = was developed specifically by taulman3D to provide three major features to 3D Printing.  Low shrinkage, Higher strength than ABS and aesthetics beyond ABS and PLA due to it's enhanced optical properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePotential uses:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAs a replacement for any parts currently printed using ABS t-glase is 100% bonding layer to layer and parts will never \"split\" apart or \"de-laminate\" even in very large prints.\u003c\/li\u003e\n\u003cli\u003eGlass like qualities\u003c\/li\u003e\n\u003cli\u003eLight Pipe capable\u003c\/li\u003e\n\u003cli\u003eGlass clear when used with clear epoxies\u003c\/li\u003e\n\u003cli\u003eCrystal like reflections of the surface\u003c\/li\u003e\n\u003cli\u003eRed, Green, Blue and Black are translucent\u003c\/li\u003e\n\u003cli\u003eNow in Opaque White for a white that has a super gloss surface\u003c\/li\u003e\n\u003cli\u003e\"Non-shattering\" parts upon over-stress\u003c\/li\u003e\n\u003cli\u003eArchitectural Components\u003c\/li\u003e\n\u003cli\u003eJewelry\u003c\/li\u003e\n\u003cli\u003eGaming pc's\u003c\/li\u003e\n\u003cli\u003eLight catching designs of any type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTaulman t-glase is derived from the strongest PETT polymer combination available in the market. As t-glase is part of the Taulman3D family you can be sure that t-glase is a strong material! Where Taulman’s 618 and 645 nylons are somewhat bendable, t-glase is a fairly stiff material. When it comes to stiffness\/bend-ability, t-glase is more similar to ABS and PLA, rather than to Taulman’s 618 and 645 nylon filaments.\u003c\/p\u003e\n\u003cp\u003eT-Glase has excellent bridging features and has very little to zero warpage, which makes it an excellent material for printing large objects. Like Taulman 618 and 645, t-glase prints without any odors or fumes.\u003c\/p\u003e\n\u003cp\u003eTaulman t-glase is FDA approved, as t-glase is specifically made of FDA approved polymers for direct food contact\/containers.  This includes cups and other liquid storage parts as well as utensils\u003c\/p\u003e\n\u003cp\u003eT-glase is recyclable. While t-glase is not biodegradable like PLA, it is however 100% reclaimable in a compatible home filament extruder\/maker.\u003c\/p\u003e\n\u003cp\u003eTaulman3D t-glase’s clarity supports industry’s requirements for non-destructive evaluation of 3D Printed parts\u003c\/p\u003e\n\u003cp\u003eT-glase’s very low shrinkage makes printing large flat surfaces a breeze.  And it easily prints to acrylic, glass, Kapton and other platforms\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\"\u003e\u003cimg class=\"size-full wp-image-6634\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\" alt=\"tualman-material-selections\" width=\"834\" height=\"672\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003etualman-material-selections\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\u003ca href=\"http:\/\/taulman3d.com\/t-glase-optics.html\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #2a2a2a; font-size: xx-large;\"\u003eHacking t-glase to look more like glass!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"15%\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-filament-Weight_icon.png?10482698017282975306\" alt=\"3d filament net weight\" data-pin-nopin=\"true\"\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG (1.1 LB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-printing-temperature-guideline_pico.jpg?17244370916201715492\" alt=\"3d printing temperature guideline\"\u003e Printing\u003cbr\u003e Temperature:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e238°C - 245°C\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eWill print down to 230C and up to about 248C\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eT-glase prints easily to acrylic, glass, Kapton and other platforms\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNozzle = any size\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003ePrint speed = ABS speeds - slower for high detailed prints\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eRetraction = .5mm\/.1mm nozzle or for a .5mm nozzle = 2.5mm\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003ePrint bed = Glass heated to 45C with coat of PVA\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNOTE:  It is best \"NOT\" to let the bed cool to ambient, but only down to 35C in end of g-code, This will reduce glass breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003c\/div\u003e"}
Taulman T-Glass PETT-Blue-2.85mm 1lb - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

Taulman T-Glass PETT-Blue-2.85mm 1lb

$38.99 CAD

Taulman 3D "T-Glase" is an industrial high strength PETT material. T-Glase (or Tough Glass) (Tee-Glass) = was developed specifically by taulman3D to provide three major features to 3D Printing.  Low shrinkage, Higher strength than ABS and aesthetics beyond ABS and PLA due to it's enhanced optical properties. Potential uses: As a replacement fo...


More Info
Sold Out
Taulman T-Glass PETT-Clear-2.85mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services
Taulman T-Glass PETT-Clear-2.85mm

Filaments

$38.99 CAD
{"id":8058625355,"title":"Taulman T-Glass PETT-Clear-2.85mm","handle":"t-glass-pett-clear-2-85mm","description":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003eTaulman 3D \"T-Glase\" is an industrial high strength PETT material.\u003c\/p\u003e\n\u003cp\u003eT-Glase (or Tough Glass) (Tee-Glass) = was developed specifically by taulman3D to provide three major features to 3D Printing.  Low shrinkage, Higher strength than ABS and aesthetics beyond ABS and PLA due to it's enhanced optical properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePotential uses:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAs a replacement for any parts currently printed using ABS t-glase is 100% bonding layer to layer and parts will never \"split\" apart or \"de-laminate\" even in very large prints.\u003c\/li\u003e\n\u003cli\u003eGlass like qualities\u003c\/li\u003e\n\u003cli\u003eLight Pipe capable\u003c\/li\u003e\n\u003cli\u003eGlass clear when used with clear epoxies\u003c\/li\u003e\n\u003cli\u003eCrystal like reflections of the surface\u003c\/li\u003e\n\u003cli\u003eRed, Green, Blue and Black are translucent\u003c\/li\u003e\n\u003cli\u003eNow in Opaque White for a white that has a super gloss surface\u003c\/li\u003e\n\u003cli\u003e\"Non-shattering\" parts upon over-stress\u003c\/li\u003e\n\u003cli\u003eArchitectural Components\u003c\/li\u003e\n\u003cli\u003eJewelry\u003c\/li\u003e\n\u003cli\u003eGaming pc's\u003c\/li\u003e\n\u003cli\u003eLight catching designs of any type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTaulman t-glase is derived from the strongest PETT polymer combination available in the market. As t-glase is part of the Taulman3D family you can be sure that t-glase is a strong material! Where Taulman’s 618 and 645 nylons are somewhat bendable, t-glase is a fairly stiff material. When it comes to stiffness\/bend-ability, t-glase is more similar to ABS and PLA, rather than to Taulman’s 618 and 645 nylon filaments.\u003c\/p\u003e\n\u003cp\u003eT-Glase has excellent bridging features and has very little to zero warpage, which makes it an excellent material for printing large objects. Like Taulman 618 and 645, t-glase prints without any odors or fumes.\u003c\/p\u003e\n\u003cp\u003eTaulman t-glase is FDA approved, as t-glase is specifically made of FDA approved polymers for direct food contact\/containers.  This includes cups and other liquid storage parts as well as utensils\u003c\/p\u003e\n\u003cp\u003eT-glase is recyclable. While t-glase is not biodegradable like PLA, it is however 100% reclaimable in a compatible home filament extruder\/maker.\u003c\/p\u003e\n\u003cp\u003eTaulman3D t-glase’s clarity supports industry’s requirements for non-destructive evaluation of 3D Printed parts\u003c\/p\u003e\n\u003cp\u003eT-glase’s very low shrinkage makes printing large flat surfaces a breeze.  And it easily prints to acrylic, glass, Kapton and other platforms\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\"\u003e\u003cimg class=\"size-full wp-image-6634\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\" alt=\"tualman-material-selections\" width=\"834\" height=\"672\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003etualman-material-selections\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\u003ca href=\"http:\/\/taulman3d.com\/t-glase-optics.html\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #2a2a2a; font-size: xx-large;\"\u003eHacking t-glase to look more like glass!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"15%\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-filament-Weight_icon.png?10482698017282975306\" alt=\"3d filament net weight\" data-pin-nopin=\"true\"\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG (1.1 LB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-printing-temperature-guideline_pico.jpg?17244370916201715492\" alt=\"3d printing temperature guideline\"\u003e Printing\u003cbr\u003e Temperature:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e238°C - 245°C\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eWill print down to 230C and up to about 248C\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eT-glase prints easily to acrylic, glass, Kapton and other platforms\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNozzle = any size\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003ePrint speed = ABS speeds - slower for high detailed prints\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eRetraction = .5mm\/.1mm nozzle or for a .5mm nozzle = 2.5mm\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003ePrint bed = Glass heated to 45C with coat of PVA\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNOTE:  It is best \"NOT\" to let the bed cool to ambient, but only down to 35C in end of g-code, This will reduce glass breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003c\/div\u003e","published_at":"2017-01-29T12:28:30-05:00","created_at":"2017-01-29T12:28:30-05:00","vendor":"Taulman","type":"Filaments","tags":["2.85 mm","2.85mm","3 mm","3mm","ASA\/PET 3 mm \/ 2.85 mm","Clear","CoPolymer","Natural","PETT","T-Glass","Taulman"],"price":3899,"price_min":3899,"price_max":3899,"available":false,"price_varies":false,"compare_at_price":4799,"compare_at_price_min":4799,"compare_at_price_max":4799,"compare_at_price_varies":false,"variants":[{"id":26393931083,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FL0012-TGClear-Taul -2.85","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Taulman T-Glass PETT-Clear-2.85mm","public_title":null,"options":["Default Title"],"price":3899,"weight":1000,"compare_at_price":4799,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"688295584148","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/tglase-clear_4926c767-ad34-4e8b-b39a-e1c604a49bd1.png?v=1594464429"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/tglase-clear_4926c767-ad34-4e8b-b39a-e1c604a49bd1.png?v=1594464429","options":["Title"],"media":[{"alt":"Taulman T-Glass PETT-Clear-2.85mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":94742773796,"position":1,"preview_image":{"aspect_ratio":1.709,"height":468,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/tglase-clear_4926c767-ad34-4e8b-b39a-e1c604a49bd1.png?v=1568829411"},"aspect_ratio":1.709,"height":468,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/tglase-clear_4926c767-ad34-4e8b-b39a-e1c604a49bd1.png?v=1568829411","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003eTaulman 3D \"T-Glase\" is an industrial high strength PETT material.\u003c\/p\u003e\n\u003cp\u003eT-Glase (or Tough Glass) (Tee-Glass) = was developed specifically by taulman3D to provide three major features to 3D Printing.  Low shrinkage, Higher strength than ABS and aesthetics beyond ABS and PLA due to it's enhanced optical properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePotential uses:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAs a replacement for any parts currently printed using ABS t-glase is 100% bonding layer to layer and parts will never \"split\" apart or \"de-laminate\" even in very large prints.\u003c\/li\u003e\n\u003cli\u003eGlass like qualities\u003c\/li\u003e\n\u003cli\u003eLight Pipe capable\u003c\/li\u003e\n\u003cli\u003eGlass clear when used with clear epoxies\u003c\/li\u003e\n\u003cli\u003eCrystal like reflections of the surface\u003c\/li\u003e\n\u003cli\u003eRed, Green, Blue and Black are translucent\u003c\/li\u003e\n\u003cli\u003eNow in Opaque White for a white that has a super gloss surface\u003c\/li\u003e\n\u003cli\u003e\"Non-shattering\" parts upon over-stress\u003c\/li\u003e\n\u003cli\u003eArchitectural Components\u003c\/li\u003e\n\u003cli\u003eJewelry\u003c\/li\u003e\n\u003cli\u003eGaming pc's\u003c\/li\u003e\n\u003cli\u003eLight catching designs of any type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTaulman t-glase is derived from the strongest PETT polymer combination available in the market. As t-glase is part of the Taulman3D family you can be sure that t-glase is a strong material! Where Taulman’s 618 and 645 nylons are somewhat bendable, t-glase is a fairly stiff material. When it comes to stiffness\/bend-ability, t-glase is more similar to ABS and PLA, rather than to Taulman’s 618 and 645 nylon filaments.\u003c\/p\u003e\n\u003cp\u003eT-Glase has excellent bridging features and has very little to zero warpage, which makes it an excellent material for printing large objects. Like Taulman 618 and 645, t-glase prints without any odors or fumes.\u003c\/p\u003e\n\u003cp\u003eTaulman t-glase is FDA approved, as t-glase is specifically made of FDA approved polymers for direct food contact\/containers.  This includes cups and other liquid storage parts as well as utensils\u003c\/p\u003e\n\u003cp\u003eT-glase is recyclable. While t-glase is not biodegradable like PLA, it is however 100% reclaimable in a compatible home filament extruder\/maker.\u003c\/p\u003e\n\u003cp\u003eTaulman3D t-glase’s clarity supports industry’s requirements for non-destructive evaluation of 3D Printed parts\u003c\/p\u003e\n\u003cp\u003eT-glase’s very low shrinkage makes printing large flat surfaces a breeze.  And it easily prints to acrylic, glass, Kapton and other platforms\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-switch__content\" data-content=\"desc\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\"\u003e\u003cimg class=\"size-full wp-image-6634\" src=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/10\/Tualman-Material-Selections.png\" alt=\"tualman-material-selections\" width=\"834\" height=\"672\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003etualman-material-selections\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\u003ca href=\"http:\/\/taulman3d.com\/t-glase-optics.html\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #2a2a2a; font-size: xx-large;\"\u003eHacking t-glase to look more like glass!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"paragraph\" style=\"text-align: center;\"\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"15%\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-filament-Weight_icon.png?10482698017282975306\" alt=\"3d filament net weight\" data-pin-nopin=\"true\"\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e0.45 KG (1.1 LB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/3d-printing-temperature-guideline_pico.jpg?17244370916201715492\" alt=\"3d printing temperature guideline\"\u003e Printing\u003cbr\u003e Temperature:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e238°C - 245°C\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eWill print down to 230C and up to about 248C\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eT-glase prints easily to acrylic, glass, Kapton and other platforms\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNozzle = any size\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003ePrint speed = ABS speeds - slower for high detailed prints\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eRetraction = .5mm\/.1mm nozzle or for a .5mm nozzle = 2.5mm\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003ePrint bed = Glass heated to 45C with coat of PVA\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNOTE:  It is best \"NOT\" to let the bed cool to ambient, but only down to 35C in end of g-code, This will reduce glass breakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003c\/div\u003e"}
Taulman T-Glass PETT-Clear-2.85mm - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

Taulman T-Glass PETT-Clear-2.85mm

$38.99 CAD

Taulman 3D "T-Glase" is an industrial high strength PETT material. T-Glase (or Tough Glass) (Tee-Glass) = was developed specifically by taulman3D to provide three major features to 3D Printing.  Low shrinkage, Higher strength than ABS and aesthetics beyond ABS and PLA due to it's enhanced optical properties. Potential uses: As a replacement fo...


More Info
{"id":4460896452739,"title":"Taulman Tech-G Clear - 1.75mm Filament - 1 kg","handle":"taulman-tech-g-clear-3d-printing-filament","description":"\u003cp\u003eTech-G was specifically designed to address two specific problems with PLA and ABS filaments. In case of PLA, it was brittle nature which severely limited functional testing and ABS was limited in its tensile strength. Hence, Taulman launched a new high-strength PETG which had much higher tensile strength than ABS and more elongation than a typical PLA filament.\u003c\/p\u003e\n\u003cp\u003eIt comes in natural color and is widely used in designing jewelry. It is available in 1.75mm, and 2.85mm diameters and the spool weighs 1kg.\u003c\/p\u003e\n\u003cp\u003eIt is FDA approved for both food and drink contact and is soluble in Tetrahydrofuran like most of our printing filaments available on this website.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications \u003c\/h4\u003e\n\u003ctable width=\"100%\" class=\"table-hover table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacture Part ID\u003c\/td\u003e\n\u003ctd\u003etegc1\/tegc3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHS Code\u003c\/td\u003e\n\u003ctd\u003e3916.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThermal\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrinting Temperature\u003c\/td\u003e\n\u003ctd\u003e235C-242C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd\u003e217C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg Glass transition\u003c\/td\u003e\n\u003ctd\u003e77C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePyrolysis - Thermal degradation\u003c\/td\u003e\n\u003ctd\u003e294C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNon-Destructive Evaluation\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint-Bed Temp\u003c\/td\u003e\n\u003ctd\u003e68C Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temp (Enclosure)\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePhysical\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Diameter (3mm Maximum Dia)\u003c\/td\u003e\n\u003ctd\u003e1.75mm\/2.85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight \/spool\u003c\/td\u003e\n\u003ctd\u003e1kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Length\/spool (In Feet)\u003c\/td\u003e\n\u003ctd\u003e700\/520\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage - in\/in\u003c\/td\u003e\n\u003ctd\u003e0.0029\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolvent\/Glue\u003c\/td\u003e\n\u003ctd\u003eTetrahydrofuran\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Stress \"PSI\" when 3D Printed\u003c\/td\u003e\n\u003ctd\u003e5.900\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Elongation when 3D Printed\u003c\/td\u003e\n\u003ctd\u003e3.00%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModulus \"PSI\" when 3D Printed\u003c\/td\u003e\n\u003ctd\u003e63839\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOptical\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpacity\u003c\/td\u003e\n\u003ctd\u003e90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReflectivity\u003c\/td\u003e\n\u003ctd\u003eTBD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApprovals\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA - Direct Food Contact\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA Direct Drink Contact\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUL Flammability\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUL 94 HB\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUL 94 V2 at 1.5 mm thickness\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeatures\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface texture\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLiving Hinge\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse of Taps for threads\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCNC finish tooling\u003c\/td\u003e\n\u003ctd\u003eCarbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCNC Coolant\u003c\/td\u003e\n\u003ctd\u003eForced Air Only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse in 3D Forging\u003c\/td\u003e\n\u003ctd\u003egood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrinted Prosthesis\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRobotic Assemblies\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJewelry Printing\u003c\/td\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFumes\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLenticulated overlays.\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDye type\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDye Uptake (Saturation)\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecifications are subject to change\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2020-01-18T10:44:02-05:00","created_at":"2020-01-18T12:34:39-05:00","vendor":"Taulman","type":"Filaments","tags":["1.75","1.75 mm","1.75mm","3D Filament","3D Printer Filament","Filament","PETG 1.75 mm"],"price":3899,"price_min":3899,"price_max":3899,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31752251572355,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TMN-FL-1.75MM-1KG-Clear","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taulman Tech-G Clear - 1.75mm Filament - 1 kg","public_title":null,"options":["Default Title"],"price":3899,"weight":2000,"compare_at_price":null,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":"688295584797","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Capture_97095f70-c284-4b09-84f0-6cf9fc2de1d2.jpg?v=1594468128"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Capture_97095f70-c284-4b09-84f0-6cf9fc2de1d2.jpg?v=1594468128","options":["Title"],"media":[{"alt":"Taulman Tech-G Clear - 1.75mm Filament - 1 kg - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":6134906847363,"position":1,"preview_image":{"aspect_ratio":1.354,"height":847,"width":1147,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Capture_97095f70-c284-4b09-84f0-6cf9fc2de1d2.jpg?v=1579368907"},"aspect_ratio":1.354,"height":847,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Capture_97095f70-c284-4b09-84f0-6cf9fc2de1d2.jpg?v=1579368907","width":1147}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eTech-G was specifically designed to address two specific problems with PLA and ABS filaments. In case of PLA, it was brittle nature which severely limited functional testing and ABS was limited in its tensile strength. Hence, Taulman launched a new high-strength PETG which had much higher tensile strength than ABS and more elongation than a typical PLA filament.\u003c\/p\u003e\n\u003cp\u003eIt comes in natural color and is widely used in designing jewelry. It is available in 1.75mm, and 2.85mm diameters and the spool weighs 1kg.\u003c\/p\u003e\n\u003cp\u003eIt is FDA approved for both food and drink contact and is soluble in Tetrahydrofuran like most of our printing filaments available on this website.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications \u003c\/h4\u003e\n\u003ctable width=\"100%\" class=\"table-hover table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacture Part ID\u003c\/td\u003e\n\u003ctd\u003etegc1\/tegc3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHS Code\u003c\/td\u003e\n\u003ctd\u003e3916.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThermal\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrinting Temperature\u003c\/td\u003e\n\u003ctd\u003e235C-242C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd\u003e217C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg Glass transition\u003c\/td\u003e\n\u003ctd\u003e77C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePyrolysis - Thermal degradation\u003c\/td\u003e\n\u003ctd\u003e294C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNon-Destructive Evaluation\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint-Bed Temp\u003c\/td\u003e\n\u003ctd\u003e68C Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temp (Enclosure)\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePhysical\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Diameter (3mm Maximum Dia)\u003c\/td\u003e\n\u003ctd\u003e1.75mm\/2.85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight \/spool\u003c\/td\u003e\n\u003ctd\u003e1kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Length\/spool (In Feet)\u003c\/td\u003e\n\u003ctd\u003e700\/520\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage - in\/in\u003c\/td\u003e\n\u003ctd\u003e0.0029\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolvent\/Glue\u003c\/td\u003e\n\u003ctd\u003eTetrahydrofuran\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Stress \"PSI\" when 3D Printed\u003c\/td\u003e\n\u003ctd\u003e5.900\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Elongation when 3D Printed\u003c\/td\u003e\n\u003ctd\u003e3.00%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModulus \"PSI\" when 3D Printed\u003c\/td\u003e\n\u003ctd\u003e63839\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOptical\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpacity\u003c\/td\u003e\n\u003ctd\u003e90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReflectivity\u003c\/td\u003e\n\u003ctd\u003eTBD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApprovals\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA - Direct Food Contact\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA Direct Drink Contact\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUL Flammability\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUL 94 HB\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUL 94 V2 at 1.5 mm thickness\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeatures\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface texture\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLiving Hinge\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse of Taps for threads\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCNC finish tooling\u003c\/td\u003e\n\u003ctd\u003eCarbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCNC Coolant\u003c\/td\u003e\n\u003ctd\u003eForced Air Only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse in 3D Forging\u003c\/td\u003e\n\u003ctd\u003egood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrinted Prosthesis\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRobotic Assemblies\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJewelry Printing\u003c\/td\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFumes\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLenticulated overlays.\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDye type\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDye Uptake (Saturation)\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecifications are subject to change\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}
Taulman Tech-G Clear - 1.75mm Filament - 1 kg - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services

Taulman Tech-G Clear - 1.75mm Filament - 1 kg

$38.99 CAD

Tech-G was specifically designed to address two specific problems with PLA and ABS filaments. In case of PLA, it was brittle nature which severely limited functional testing and ABS was limited in its tensile strength. Hence, Taulman launched a new high-strength PETG which had much higher tensile strength than ABS and more elongation than a typi...


More Info