Welcome to Digitmakers.ca!
Aluminum plate with installed bearing
Enhance your Printing Quality with this nozzle assembly set
The Heater Block improve the flow of filament and thermal Conductivity .
Stainless Steel Extruder Drive Gear 5mm Shaft 40 teeth
USB Cable Type A To Type B 50cm.
Inductive Sensor for Duplicator i3 Plus mk2, Duplicator 6 Plus and Duplicator 9
8.9 inch LCD screen for the Wanhao CGR
The belt tension spring for wanhao duplicator D4 i3
1 x Genuine Wanhao replacement thermocouple. These run from the Duplicator 4 motherboard up the loom and down onto the hotend where they are secured using an allen key. The thermocouple is one of the most sensitive parts of any 3D printer which can sometimes fail. This is a cure for the "Heater Error！My temperature reads are failing!..." message...
Z Axis Electric Motor Cable 0.6m for the Wanhao Duplicator 4.
Wanhao D5S Mini Thermocouple and Chip
Wanhao D5S Mini Thermocouple Extending Cable.
Wanhao D6 extruder motor cable 50mm.
Wanhao D6 Black ribbon cable 1.5m, extruder data cable.
Wanhao D6 Heating Cartridge Tube
Interface board (keyset, patching board) V1.2 for Wanhao Duplicator D6.
OLED Display for Wanhao D6.
Interface board V1.7 for Wanhao D6 and D9. Mounts behind extruder.
Interface board V1.5 for Wanhao Duplicator i3 Plus MK2, D6plus MK2 and D9. Mounts behind extruder.
Wanhao D6 /D9 BL Touch cable. Length of 17.5 cm.
UV LED assembly for Wanhao Duplicator 7. Comes with heat sink and wiring installed.
V1.5 upgrading pack for Wanhao Duplicator 7 3D printer includes:
1 x build plate
1 x z-axis beam
1 x aluminum base
1 x top red cover
1 x coupler
2 x 8mm bar
2 x spring washer
3 x M3 x 10mm hex bolt
7 x M4 x 8mm round bolt
back cover with cooling fan
V1.4 upgrading pack for Wanhao D7/D7 Plus 3D printer includes:
1 x spring coupler
1 x machine build platform
1 x anti-backlash nut
Power Resume Cable 20cm for Wanhao 3D printers
This Wanhao factory replacement part is compatible with:
Wanhao Duplicator 9 D9/300/400/500 Wanhao Duplicator 6 Plus Mark II Wanhao Duplicator i3 Plus V2.0 Mark II
Wanhao D9 400 Upgrade kit with BL-touch
This kit contains:
D9 400 Roller Mount
Printed Mounting Plate
M3x6 Bolt x2
DC 24V Fan
M5x16 Bolt x2
10mm Timing Belt
BL Touch board V1.1 for Wanhao D9.
Wanhao D9 Carbon Crystal Glass Plate with Mag Mat.
Wanhao OEM Replacement D9 20pin Extruder Ribbon Cable.D9 300 - 1.5m longD9 400 - 1.6m longD9 500 - 1.9m long
Wanhao D9 Heating Cartridge Tube for hotend.
24V, about 150mm
D9/300/400 20P 1.55M ribbon cable
WANHAO Duplicator 3D Printer I3 34F replacement stepper motor for extruder, X and Y axis
Wanhao Duplicator 5 Endstop Switch PCB board.
Wanhao Duplicator 7 Mother Board v1.2. Original Wanhao Part.
Wanhao Duplicator 7 Nanobox
Touchscreen control for your LCD resin printer
Removes requirement for a PC to run your D7
Wanhao Duplicator 9 Touch LCD Screen Replacement with flex cable.
Wanhao coupler for the Duplicator D7/D7 Plus
Photoelectric Switch V1.0 for the Wanhao Duplicator D7/D7 Plus.
5 x Wanhao insulated washer bushings for the Duplicator i3
Wanhao thermistor for the Duplicator i3 Plus/D9
200mm x 260mm (8" x 10.5") FEP Film sized for the Wanhao CGR printer
Chain Cable for the Wanhao i3
Extruder Motor Cable for Wanhao i3 and other fitting models.
This OEM Wanhao factory replacement is ONLY compatible with the Wanhao i3 3D printer.
Original I3 wanhao Idler
This OEM Wanhao factory replacement is ONLY compatible with the i3 Mini 3D printer.
Wanhao i3 Mini V2.0 3D Printer Spare Part
I3 Mini Nozzle
for Wanhao i3 Mini 3D Printers
Wanhao D6 Black ribbon cable 0.6m, extruder data cable.
1111 Flint RoadUnit #12North York, ONM3J 3C7
TOLL FREE: 888-635-7113
LOCAL NUMBER: +1 416-739-1515