Bondtech HeatLink 24v 50W Heater

To use this product, add to cart the correct Heatlink Interface Cable to connect this thermistor to your printer. Check the compatibility table below.

• Bondtech HeatLink JST-XHP-2
• Bondtech HeatLink JST VRH-2N
• Bondtech HeatLink JST SMP-02V-BC
• Bondtech Heatlink Ferrule

Plug & Play Heater

• 1.5m leads with black sleeves and Molex micro-fit 3.0 female connector;
• Ø 6mm Stainless Steel cartridge with laser engraved Bondtech logo, SKU, electric specification and date of packaging
• 24v 50W heating element

Bondtech HeatLink 12v 50W Heater

Have It Your Way!

This 24v 50W Heater cartridge and cable uses a Molex micro-fit 3.0 female connector to enable extending it with one of the HeatLink interface cables and connect to your printer without hassle.

The HeatLink range is an alternative group of thermistors and heater cables enabled with Molex micro-fit connectors, complemented by several short interface cables for connecting to dozens of 3D printer models to bring ease of use to their owners.

HeatLink is the answer to the growing demand for powerful heaters and high temperature thermistors that are ready to use and easy to install.

Plug & Play thermistors and heaters from Bondtech.

Ready to use on ( at least ) 25 different Creality and Prusa models.

Pair a Bondtech thermistor or heater with a HeatLink interface cable to plug into any printer without soldering or crimping.

Each Interface Cable is 50mm long and will fit entirely inside the control box.

Bondtech HeatLink Interface Cables Compatibility Table