colorFabb Varioshore TPU - 1.75mm 700g (Various Colors)

colorFabb Varioshore TPU - 1.75mm 700g  (Various Colors)
colorFabb Varioshore TPU - 1.75mm 700g  (Various Colors)
colorFabb Varioshore TPU - 1.75mm 700g  (Various Colors)
screen may slightly differ with real color
Color:
Black

Product variant with selected options does not exist!

View all options as a list

Price
$39.99

Frequently Bought Together

Color: Black

Stock Notification

Get notified when this product is available again

Out of stock

ColorFabb VarioShore TPU

Varioshore TPU has a few main distinctive features: its variable shore hardness, reduced weight and density and soft touch. VarioShore TPU allows users to vary the density of the material by adjusting temperature and material throughput (speed & layer height). At temperatures between 200 and 250C the materials will start to expand to roughly 1.4-1.6 times its original volume, which reduces the density to 0.7 to 0.9 g/cm³. This means the material can be printed at low flow rates (60-70%), to compensate the active foaming, which in return gives very soft printed parts. Between 190-200C the material can be printed without foaming, resulting in different haptics and harder prints compared to foamed samples.

From shore hardness 92A (unfoamed) to shore 55A (maximum foamed).

Developed in co-operation with Lubrizol, varioShore TPU is a material ideally suited for printing cosplay parts for instance.

Please note that color variations may occur. Color will turn lighter when material is at maximum foamed state as opposed to non-foamed state which shows a deeper and richer color.

DOWNLOAD TDS

Material: 
Colorfabb varioShore TPU
Diameter Tolerance:
± 0.1 mm
Density: 
1,2-1,3 g/cm3
Glass Transition Temperature:
-20C

 

 

Printing Advice

Advised 3D printing temperature 
190C-250C
Advised 3d print speed
20-30 mm/s
Advised Heated bed 
20-40C
Cooling fan

Use the least amount of cooling when maximum foaming is required. For better overhang performance use 50-100% cooling.

We advise our community to use standard TPU settings as a base setting for developing your own pre-sets.

Make sure the distance between nozzle and platform is not to small, especially if the material is being foamed while printing, the pressure will need to be released from the hot-end to prevent clogging and feeder issues.

Recommended for You

Browsing history

Request a Quotation

Book a Demo