ESun Glow in the Dark PLA Filament 1.75mm 1kg

Glow in the dark additives are highly abrasive, meaning that you will need to upgrade from a brass nozzle to a hardened steel nozzle. 

Made by E-Sun. PLA is 100% biodegradable and environment friendly.

PLA Advantages:

• Blended with special biodegradable bio-polyesters.
• High rigidity. Glow in the dark.
• Smoother finished printouts.
• No cracking or brittle problem.
• Elongation At Break: 5%
• Izod Impact Strength: 4.2 kJ/m²
• Net Weight: 1 kg

Printing Parameters

• Best Printing Temperature：190-210 ℃
• Bed Temperature：0/65 ℃
• Printing Speed：30~90 mm/s
• Movement Speed：90~150 mm/s
• Reinforced spool with bigger inner diameter to allow smoother pull from extruder, unlike most black spool on the market which has a tighter inner diameter.
• Non harmful, non-toxic, and environment friendly.
• Low material shrinkage rate, uniform diameter ± 0.05 mm 
• Greater selection of colors to choose from.
• Bio-Degradable.
• Guaranteed Customer Satisfaction.