eSUN PLA+ Black/White/Grey 1.75 mm 3kg Spool

To print your own spool holder, see HERE

To purchase a modular spool holder that can be oriented anywhere, see HERE

Made by E-Sun

Spool Dimension 

• Outside Diameter: 270 mm 
• Inside Diameter: 50 mm 
• Width: 100 mm 

PLA+ is 100% biodegradable and environment friendly.

PLA+ Advantages:

• Blended with special bio-degradable bio-polyesters.
• High rigidity. Good Glossiness.
• Several times tougher than PLA
• Smoother finished printouts.
• No cracking or brittle problem.
• Elongation At Break:  PLA+ 29%   Regular PLA 5%
• Izod Impact Strength:  PLA+ 7KJ/m2    Regular PLA 4.2KJ/m2
• Net Weight: 3KG

• Best Printing Temperature：205-220℃
• Bed Temperature：0/65℃
• Printing Speed：30~90mm/s
• Movement Speed ：90~150mm/s
• Reinforced spool with bigger inner diameter to allow smoother pull from extruder, unlike most black spool on the market which has a tighter inner diameter.
• Non harmful, non-toxic and environment friendly
• Low material shrinkage rate, uniform diameter +/- 0.05mm
• Greater selection of colors to choose from.
• Bio-Degradable
• Guaranteed Customer Satisfaction