GT2 Timing Belt 1m-length 6mm-width - for CR-10 (Y Axis)

{"id":8053885515,"title":"J-HEAD MKIV HOTEND FOR REPRAP 3D PRINTERS","handle":"j-head-mkiv-hotend-for-reprap-3d-printers","description":"\u003cp\u003eJ-Head MKIV Hotend is innovative light weight and simple . it works with most reprap extruders. Comes with heater cartridge and Thermostier \u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e• Efficient heat transfer by eliminating the thermal conductivity from the hot end.\u003c\/li\u003e\n\u003cli\u003e• PTFE tubing (replaceable) connect or join between the PEEK insulator and the Aluminum Nozzle.\u003c\/li\u003e\n\u003cli\u003e• Light Weight\u003c\/li\u003e\n\u003cli\u003e• Plated with anodic oxide coating, which can resist oxidation corrosion and increase nozzle hardness, thus ensuring finer and more stable printing.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension:\u003c\/strong\u003e 0.83 in x 0.65 in x 2.72 in (2.1 cm x 1.65 cm x 6.92 cm) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Size:\u003c\/strong\u003e 0.4 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament Size:\u003c\/strong\u003e 1.75mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e : 4.94 oz (140 g)\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","published_at":"2017-01-28T12:33:42-05:00","created_at":"2017-01-28T12:33:42-05:00","vendor":"GENERIC","type":"Parts","tags":["3D Printers Hot end","electrical","J-Head","mechanical","nozzle","reprap"],"price":3000,"price_min":3000,"price_max":3000,"available":true,"price_varies":false,"compare_at_price":5200,"compare_at_price_min":5200,"compare_at_price_max":5200,"compare_at_price_varies":false,"variants":[{"id":26354891339,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EX003","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"J-HEAD MKIV HOTEND FOR REPRAP 3D PRINTERS","public_title":null,"options":["Default Title"],"price":3000,"weight":500,"compare_at_price":5200,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001370","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/j-head-mkiv-hotend-for-reprap-3d-printers-7_gif.jpg?v=1613452894"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/j-head-mkiv-hotend-for-reprap-3d-printers-7_gif.jpg?v=1613452894","options":["Title"],"media":[{"alt":"J-HEAD MKIV HOTEND FOR REPRAP 3D PRINTERS - Digitmakers.ca","id":94662787108,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/j-head-mkiv-hotend-for-reprap-3d-printers-7_gif.jpg?v=1613452894"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/j-head-mkiv-hotend-for-reprap-3d-printers-7_gif.jpg?v=1613452894","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eJ-Head MKIV Hotend is innovative light weight and simple . it works with most reprap extruders. Comes with heater cartridge and Thermostier \u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e• Efficient heat transfer by eliminating the thermal conductivity from the hot end.\u003c\/li\u003e\n\u003cli\u003e• PTFE tubing (replaceable) connect or join between the PEEK insulator and the Aluminum Nozzle.\u003c\/li\u003e\n\u003cli\u003e• Light Weight\u003c\/li\u003e\n\u003cli\u003e• Plated with anodic oxide coating, which can resist oxidation corrosion and increase nozzle hardness, thus ensuring finer and more stable printing.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension:\u003c\/strong\u003e 0.83 in x 0.65 in x 2.72 in (2.1 cm x 1.65 cm x 6.92 cm) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Size:\u003c\/strong\u003e 0.4 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament Size:\u003c\/strong\u003e 1.75mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e : 4.94 oz (140 g)\n\u003c\/li\u003e\n\u003c\/ol\u003e\n"}

{"id":8058612875,"title":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm","handle":"3d-printer-extruder-drive-gear-for-1-75mm-3mm-brass-pulley-5mm","description":"\u003cp\u003e3D Printer Extruder Drive Gear for 1.75mm \u0026amp; 3mm Filament – Brass Pulley 5mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 11 mm x 11 mm\u003c\/li\u003e\n\u003cli\u003eInner hole: 5 mm\u003c\/li\u003e\n\u003cli\u003eGear parts: 7 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Brass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFixed screw holes: the M3 thread, two fixed screw holes, fixed more strong, can better avoid skidding gear.\u003c\/p\u003e\n\u003cp\u003eGear diameter: 11 mm\u003c\/p\u003e\n\u003cp\u003eWithin the fixed screw: M3, six Angle\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 x 3D Printer Extruder Drive Gear for 1.75mm \u0026amp; 3mm Filament – Brass Pulley 5mm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","published_at":"2017-01-29T12:27:07-05:00","created_at":"2017-01-29T12:27:07-05:00","vendor":"GENERIC","type":"Parts","tags":["drive gear","extruder gear","gear","mechanical"],"price":200,"price_min":200,"price_max":200,"available":true,"price_varies":false,"compare_at_price":800,"compare_at_price_min":800,"compare_at_price_max":800,"compare_at_price_varies":false,"variants":[{"id":42274930327782,"title":"26T","option1":"26T","option2":null,"option3":null,"sku":"GEN-BRS-PLY-EXTR-GR-26T","requires_shipping":true,"taxable":true,"featured_image":{"id":39743513362662,"product_id":8058612875,"position":1,"created_at":"2023-08-08T21:00:36-04:00","updated_at":"2023-08-08T21:00:38-04:00","alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm Digitmakers.ca","width":620,"height":493,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-2326.png?v=1691542838","variant_ids":[42274930327782]},"available":true,"name":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm - 26T","public_title":"26T","options":["26T"],"price":200,"weight":500,"compare_at_price":800,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001250","featured_media":{"alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm Digitmakers.ca","id":32347639709926,"position":1,"preview_image":{"aspect_ratio":1.258,"height":493,"width":620,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-2326.png?v=1691542838"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42274930360550,"title":"40T","option1":"40T","option2":null,"option3":null,"sku":"GEN-BRS-PLY-EXTR-GR-40T","requires_shipping":true,"taxable":true,"featured_image":{"id":39743513460966,"product_id":8058612875,"position":2,"created_at":"2023-08-08T21:00:40-04:00","updated_at":"2023-08-08T21:00:42-04:00","alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm Digitmakers.ca","width":1854,"height":1853,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-915.jpg?v=1691542842","variant_ids":[42274930360550]},"available":true,"name":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm - 40T","public_title":"40T","options":["40T"],"price":200,"weight":500,"compare_at_price":800,"inventory_quantity":72,"inventory_management":"shopify","inventory_policy":"deny","barcode":"30360550","featured_media":{"alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm Digitmakers.ca","id":32347639873766,"position":2,"preview_image":{"aspect_ratio":1.001,"height":1853,"width":1854,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-915.jpg?v=1691542842"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-2326.png?v=1691542838","\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-915.jpg?v=1691542842"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-2326.png?v=1691542838","options":["Size"],"media":[{"alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm Digitmakers.ca","id":32347639709926,"position":1,"preview_image":{"aspect_ratio":1.258,"height":493,"width":620,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-2326.png?v=1691542838"},"aspect_ratio":1.258,"height":493,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-2326.png?v=1691542838","width":620},{"alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm Digitmakers.ca","id":32347639873766,"position":2,"preview_image":{"aspect_ratio":1.001,"height":1853,"width":1854,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-915.jpg?v=1691542842"},"aspect_ratio":1.001,"height":1853,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-Printer-Extruder-Drive-Gear-for-1-75mm-3mm-Brass-Pulley-5mm-Digitmakers-ca-915.jpg?v=1691542842","width":1854}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e3D Printer Extruder Drive Gear for 1.75mm \u0026amp; 3mm Filament – Brass Pulley 5mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 11 mm x 11 mm\u003c\/li\u003e\n\u003cli\u003eInner hole: 5 mm\u003c\/li\u003e\n\u003cli\u003eGear parts: 7 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Brass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFixed screw holes: the M3 thread, two fixed screw holes, fixed more strong, can better avoid skidding gear.\u003c\/p\u003e\n\u003cp\u003eGear diameter: 11 mm\u003c\/p\u003e\n\u003cp\u003eWithin the fixed screw: M3, six Angle\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 x 3D Printer Extruder Drive Gear for 1.75mm \u0026amp; 3mm Filament – Brass Pulley 5mm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n"}

{"id":8058603403,"title":"3D printer Flexible Helical Coupling Set of 2","handle":"3d-printer-flexible-helical-coupling-set-of-2","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 0.014 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHoles Size: \u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e5 mm \/ 8 mm\u003c\/li\u003e\n\u003cli\u003e6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength: \u003c\/strong\u003e25 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 2.4 x 1.7 x 1.9 cm \/ 0.94 x 0.67 x 0.75 inches\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-01-29T12:26:09-05:00","created_at":"2017-01-29T12:26:09-05:00","vendor":"GENERIC","type":"Parts","tags":["coupling","flexible coupling","mechanical"],"price":800,"price_min":800,"price_max":800,"available":true,"price_varies":false,"compare_at_price":900,"compare_at_price_min":900,"compare_at_price_max":900,"compare_at_price_varies":false,"variants":[{"id":39489904541858,"title":"5\/8mm","option1":"5\/8mm","option2":null,"option3":null,"sku":"FLEX-CPL-5-8MM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D printer Flexible Helical Coupling Set of 2 - 5\/8mm","public_title":"5\/8mm","options":["5\/8mm"],"price":800,"weight":100,"compare_at_price":900,"inventory_quantity":137,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001279","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39489904574626,"title":"6mm","option1":"6mm","option2":null,"option3":null,"sku":"FLEX-CPL-2-6MM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D printer Flexible Helical Coupling Set of 2 - 6mm","public_title":"6mm","options":["6mm"],"price":800,"weight":100,"compare_at_price":900,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":"04574626","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-printer-Flexible-Helical-Coupling-Set-of-2-Digitmakers-ca-683.png?v=1691542835"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-printer-Flexible-Helical-Coupling-Set-of-2-Digitmakers-ca-683.png?v=1691542835","options":["Size"],"media":[{"alt":"3D printer Flexible Helical Coupling Set of 2 Digitmakers.ca","id":32347639644390,"position":1,"preview_image":{"aspect_ratio":1.506,"height":362,"width":545,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-printer-Flexible-Helical-Coupling-Set-of-2-Digitmakers-ca-683.png?v=1691542835"},"aspect_ratio":1.506,"height":362,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-printer-Flexible-Helical-Coupling-Set-of-2-Digitmakers-ca-683.png?v=1691542835","width":545}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 0.014 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHoles Size: \u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e5 mm \/ 8 mm\u003c\/li\u003e\n\u003cli\u003e6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength: \u003c\/strong\u003e25 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 2.4 x 1.7 x 1.9 cm \/ 0.94 x 0.67 x 0.75 inches\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":8053886091,"title":"3D printer Heatsink 40*40*11mm heating block","handle":"3d-printer-heat-sink-40-40-11cm-heating-block","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter hole goods size :\u003c\/strong\u003e 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew mounting hole: \u003c\/strong\u003e3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting holes from:\u003c\/strong\u003e 31 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFin length:\u003c\/strong\u003e 40 mm ,\u003cstrong\u003ewidth:\u003c\/strong\u003e 40 mm, Thickness: \u003cstrong\u003e11 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n","published_at":"2017-01-28T12:33:45-05:00","created_at":"2017-01-28T12:33:45-05:00","vendor":"GENERIC","type":"Parts","tags":["generic","Heat sink","heatsink","mechanical"],"price":200,"price_min":200,"price_max":200,"available":true,"price_varies":false,"compare_at_price":400,"compare_at_price_min":400,"compare_at_price_max":400,"compare_at_price_varies":false,"variants":[{"id":26354891915,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GEN-PT-HTBLKHTSNK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D printer Heatsink 40*40*11mm heating block","public_title":null,"options":["Default Title"],"price":200,"weight":100,"compare_at_price":400,"inventory_quantity":25,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001368","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-printer-Heatsink-40-40-11mm-heating-block-Digitmakers-ca-9492.png?v=1691543517"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-printer-Heatsink-40-40-11mm-heating-block-Digitmakers-ca-9492.png?v=1691543517","options":["Title"],"media":[{"alt":"3D printer Heatsink 40*40*11mm heating block Digitmakers.ca","id":32347650523366,"position":1,"preview_image":{"aspect_ratio":1.098,"height":569,"width":625,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-printer-Heatsink-40-40-11mm-heating-block-Digitmakers-ca-9492.png?v=1691543517"},"aspect_ratio":1.098,"height":569,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-printer-Heatsink-40-40-11mm-heating-block-Digitmakers-ca-9492.png?v=1691543517","width":625}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter hole goods size :\u003c\/strong\u003e 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew mounting hole: \u003c\/strong\u003e3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting holes from:\u003c\/strong\u003e 31 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFin length:\u003c\/strong\u003e 40 mm ,\u003cstrong\u003ewidth:\u003c\/strong\u003e 40 mm, Thickness: \u003cstrong\u003e11 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n"}

{"id":8058589387,"title":"Generic MK10 PTFE Tube","handle":"3d-printer-mk10-ptfe-tube","description":"\u003cp\u003eMK10 PTFE insert ID2 mm , OD 4 mm\u003c\/p\u003e\n\u003cp\u003eThe PTFE used inside the MK10 Extruder to provide smooth way to the filament and prevent the filament from deforming before it reaches the nozzle.\u003c\/p\u003e\n\u003cp\u003e Approximately 60mm long.\u003c\/p\u003e","published_at":"2017-01-29T12:24:39-05:00","created_at":"2017-01-29T12:24:39-05:00","vendor":"GENERIC","type":"Parts","tags":["mechanical","mk10 ptfe","ptfe","PTFE tube","ptfe-tubing","reprap"],"price":300,"price_min":300,"price_max":300,"available":true,"price_varies":false,"compare_at_price":600,"compare_at_price_min":600,"compare_at_price_max":600,"compare_at_price_varies":false,"variants":[{"id":26393769483,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EX001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Generic MK10 PTFE Tube","public_title":null,"options":["Default Title"],"price":300,"weight":200,"compare_at_price":600,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001321","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/MK10-PTFE-Tube.jpg?v=1613452898"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/MK10-PTFE-Tube.jpg?v=1613452898","options":["Title"],"media":[{"alt":"3D Printer MK10 PTFE Tube - Digitmakers.ca","id":94737465380,"position":1,"preview_image":{"aspect_ratio":1.777,"height":893,"width":1587,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/MK10-PTFE-Tube.jpg?v=1613452898"},"aspect_ratio":1.777,"height":893,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/MK10-PTFE-Tube.jpg?v=1613452898","width":1587}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eMK10 PTFE insert ID2 mm , OD 4 mm\u003c\/p\u003e\n\u003cp\u003eThe PTFE used inside the MK10 Extruder to provide smooth way to the filament and prevent the filament from deforming before it reaches the nozzle.\u003c\/p\u003e\n\u003cp\u003e Approximately 60mm long.\u003c\/p\u003e"}

{"id":8058599371,"title":"Long Type Linear Ball Bearing Bushing LM8LUU","handle":"long-type-linear-ball-bearing-bushing-lm8luu","description":"\u003cp style=\"text-align: center;\"\u003eLong Type Linear Ball Bearing Bushing\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eModel:LM8LUU\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 8mm(ID)x15mm(OD)x45mm(L)\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eUpgrade your 3D printer and reduce the play in the linear ball bearing . This longer Linear bearing provide more stability and smoothness to your x, y axis.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e","published_at":"2017-01-29T12:25:40-05:00","created_at":"2017-01-29T12:25:40-05:00","vendor":"GENERIC","type":"Parts","tags":["3D parts","lead screw","Linear Bearing","mechanical"],"price":400,"price_min":400,"price_max":400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":26393810699,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GEN-BER-LM8LUU","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Long Type Linear Ball Bearing Bushing LM8LUU","public_title":null,"options":["Default Title"],"price":400,"weight":300,"compare_at_price":null,"inventory_quantity":126,"inventory_management":"shopify","inventory_policy":"deny","barcode":"15000131","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/Lm8luu-8mm-x45-mm-Bearing_800x_ba7c3c86-d989-44a7-9dae-072956cbe457.jpg?v=1613452900"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Lm8luu-8mm-x45-mm-Bearing_800x_ba7c3c86-d989-44a7-9dae-072956cbe457.jpg?v=1613452900","options":["Title"],"media":[{"alt":"Long Type Linear Ball Bearing Bushing LM8LUU - Digitmakers.ca","id":2203222474883,"position":1,"preview_image":{"aspect_ratio":1.353,"height":521,"width":705,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Lm8luu-8mm-x45-mm-Bearing_800x_ba7c3c86-d989-44a7-9dae-072956cbe457.jpg?v=1613452900"},"aspect_ratio":1.353,"height":521,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Lm8luu-8mm-x45-mm-Bearing_800x_ba7c3c86-d989-44a7-9dae-072956cbe457.jpg?v=1613452900","width":705}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp style=\"text-align: center;\"\u003eLong Type Linear Ball Bearing Bushing\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eModel:LM8LUU\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 8mm(ID)x15mm(OD)x45mm(L)\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eUpgrade your 3D printer and reduce the play in the linear ball bearing . This longer Linear bearing provide more stability and smoothness to your x, y axis.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e"}

{"id":8058620491,"title":"Micro Swiss All Metal Hotend with SLOTTED Cooling Block for Duplicator 6","handle":"micro-swiss-all-metal-hotend-with-slotted-cooling-block-for-duplicator-6","description":"\u003cp\u003eThis is Micro Swiss All Metal Hotend kit for Wanhao Duplicator 6 with the following enhancement :\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eSlotted Clamping system\u003c\/li\u003e\n\u003cli\u003eNo set screw to ding and damage the thermal tube\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignificantly better heat transfer (this is a big one!!!)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eEasier disassembly and adjustments\u003c\/li\u003e\n\u003cli\u003ePrecise control on bore diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicro Swiss All Metal Hotend Kit Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. The thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel is used for thermal break because it offers low thermal conductivity, and aluminum is used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotends will let you print at much higher temperature than  possible with original PTFE lined ones.All metal hotend  is designed to be more consistent melt chamber control. During slow extrusion rates, in PTFE lined hotends, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With an all metal design, a transition zone is always constant, being located right at the heat break. With fast extrusion rates, PTFE tube don't have enough thermal conductivity to properly melt all the plastic coming out. On original extruders, that limitation happens around 60 mm\/s, depending on nozzle size. All metal hotends solve this problem - plastic is surrounded by a thermally conductive nozzle throughout its length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e1 Plated Brass Wear Resistant Nozzle (0.4mm)\u003c\/li\u003e\n\u003cli\u003e1 Thermal tube\u003c\/li\u003e\n\u003cli\u003e1 Slotted Cooling block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/09\/MICRO_SWISS_HOTEND_4_WANHAO_D6_STEP_BY_STEP_INSTALATION_INSTRUCTIONS.pdf\"\u003emicro_swiss_hotend_4_wanhao_d6_step_by_step_instalation_instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-29T12:27:00-05:00","created_at":"2017-01-29T12:27:57-05:00","vendor":"MicroSwiss","type":"Parts","tags":["D6","Duplicator 6","Duplicator 6S","extruder","hotend","mechanical","microswiss","mk10","wanhao"],"price":5700,"price_min":5700,"price_max":5700,"available":true,"price_varies":false,"compare_at_price":6400,"compare_at_price_min":6400,"compare_at_price_max":6400,"compare_at_price_varies":false,"variants":[{"id":26393915851,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MSW-MT-HTEND-SLCB-DUPL6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Micro Swiss All Metal Hotend with SLOTTED Cooling Block for Duplicator 6","public_title":null,"options":["Default Title"],"price":5700,"weight":500,"compare_at_price":6400,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"866086000286","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/wanhao_d6_all_metal_upgrade_digitmakers.ca.jpg?v=1613452908"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/wanhao_d6_all_metal_upgrade_digitmakers.ca.jpg?v=1613452908","options":["Title"],"media":[{"alt":"Micro Swiss All Metal Hotend with SLOTTED Cooling Block for Duplicator 6 - Digitmakers.ca","id":94741987364,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/wanhao_d6_all_metal_upgrade_digitmakers.ca.jpg?v=1613452908"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/wanhao_d6_all_metal_upgrade_digitmakers.ca.jpg?v=1613452908","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis is Micro Swiss All Metal Hotend kit for Wanhao Duplicator 6 with the following enhancement :\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eSlotted Clamping system\u003c\/li\u003e\n\u003cli\u003eNo set screw to ding and damage the thermal tube\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignificantly better heat transfer (this is a big one!!!)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eEasier disassembly and adjustments\u003c\/li\u003e\n\u003cli\u003ePrecise control on bore diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicro Swiss All Metal Hotend Kit Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. The thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel is used for thermal break because it offers low thermal conductivity, and aluminum is used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotends will let you print at much higher temperature than  possible with original PTFE lined ones.All metal hotend  is designed to be more consistent melt chamber control. During slow extrusion rates, in PTFE lined hotends, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With an all metal design, a transition zone is always constant, being located right at the heat break. With fast extrusion rates, PTFE tube don't have enough thermal conductivity to properly melt all the plastic coming out. On original extruders, that limitation happens around 60 mm\/s, depending on nozzle size. All metal hotends solve this problem - plastic is surrounded by a thermally conductive nozzle throughout its length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e1 Plated Brass Wear Resistant Nozzle (0.4mm)\u003c\/li\u003e\n\u003cli\u003e1 Thermal tube\u003c\/li\u003e\n\u003cli\u003e1 Slotted Cooling block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/09\/MICRO_SWISS_HOTEND_4_WANHAO_D6_STEP_BY_STEP_INSTALATION_INSTRUCTIONS.pdf\"\u003emicro_swiss_hotend_4_wanhao_d6_step_by_step_instalation_instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":8058621643,"title":"Micro Swiss MK10 SLOTTED Cooling Block","handle":"micro-swiss-mk10-slotted-cooling-block","description":"\u003cp\u003eThis is redesigned cooling block for Wanhao i3 and Wanhao i3 plus with the following improvements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlotted Clamping system\u003c\/li\u003e\n\u003cli\u003eNo set screw to ding and damage thermal tube\u003c\/li\u003e\n\u003cli\u003eSignificantly better heat transfer\u003c\/li\u003e\n\u003cli\u003eEasier disassemble and adjustments\u003c\/li\u003e\n\u003cli\u003ePrecise control on bore diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis cooling block will work with original PTFE lined hotend, and with our Micro Swiss MK10 all metal hotend.\u003c\/p\u003e","published_at":"2017-01-29T12:28:06-05:00","created_at":"2017-01-29T12:28:06-05:00","vendor":"MicroSwiss","type":"Parts","tags":["heat block","mechanical","microswiss","mk10"],"price":2200,"price_min":2200,"price_max":2200,"available":true,"price_varies":false,"compare_at_price":2600,"compare_at_price_min":2600,"compare_at_price_max":2600,"compare_at_price_varies":false,"variants":[{"id":26393917259,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MSW-MT-HTEND-SLCB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Micro Swiss MK10 SLOTTED Cooling Block","public_title":null,"options":["Default Title"],"price":2200,"weight":300,"compare_at_price":2600,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"866086000217","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/i3_block_1_1024x1024__87931.1465089625.1280.1280.jpg?v=1613452908"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/i3_block_1_1024x1024__87931.1465089625.1280.1280.jpg?v=1613452908","options":["Title"],"media":[{"alt":"Micro Swiss MK10 SLOTTED Cooling Block - Digitmakers.ca","id":94742151204,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/i3_block_1_1024x1024__87931.1465089625.1280.1280.jpg?v=1613452908"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/i3_block_1_1024x1024__87931.1465089625.1280.1280.jpg?v=1613452908","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis is redesigned cooling block for Wanhao i3 and Wanhao i3 plus with the following improvements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlotted Clamping system\u003c\/li\u003e\n\u003cli\u003eNo set screw to ding and damage thermal tube\u003c\/li\u003e\n\u003cli\u003eSignificantly better heat transfer\u003c\/li\u003e\n\u003cli\u003eEasier disassemble and adjustments\u003c\/li\u003e\n\u003cli\u003ePrecise control on bore diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis cooling block will work with original PTFE lined hotend, and with our Micro Swiss MK10 all metal hotend.\u003c\/p\u003e"}

{"id":8053885899,"title":"Lead Screw with Nut 500mm","handle":"two-lead-screws-diameter-length-600mm","description":"\u003cp\u003e\u003cstrong\u003eLead Screws with  Nut\u003c\/strong\u003e\u003cbr\u003e Used for Z axis 3D printer , Upgrade your printer and print longer parts.\u003cbr\u003e \u003cstrong\u003eLead Screw Diameter\u003c\/strong\u003e: 8mm\u003cbr\u003e \u003cstrong\u003eScrew Pitch\u003c\/strong\u003e: 2mm\u003cbr\u003e \u003cstrong\u003eLead\u003c\/strong\u003e: 8mm\u003cbr\u003e \u003cstrong\u003eLead Screw Length\u003c\/strong\u003e: 500mm\u003c\/p\u003e","published_at":"2017-01-28T12:33:00-05:00","created_at":"2017-01-28T12:33:44-05:00","vendor":"GENERIC","type":"Parts","tags":["3D parts","lead","lead screw","leadscrew","mechanical","new-arrivals","nut","screw"],"price":1500,"price_min":1500,"price_max":1500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":26354891723,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GEN-LDSCRW-NUT-500MM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Lead Screw with Nut 500mm","public_title":null,"options":["Default Title"],"price":1500,"weight":2000,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001369","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/51PE4Fx550L._SL1005.jpg?v=1613452894"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/51PE4Fx550L._SL1005.jpg?v=1613452894","options":["Title"],"media":[{"alt":"Lead Screw with Nut 500mm - Digitmakers.ca","id":94662819876,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1005,"width":1005,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/51PE4Fx550L._SL1005.jpg?v=1613452894"},"aspect_ratio":1.0,"height":1005,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/51PE4Fx550L._SL1005.jpg?v=1613452894","width":1005}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eLead Screws with  Nut\u003c\/strong\u003e\u003cbr\u003e Used for Z axis 3D printer , Upgrade your printer and print longer parts.\u003cbr\u003e \u003cstrong\u003eLead Screw Diameter\u003c\/strong\u003e: 8mm\u003cbr\u003e \u003cstrong\u003eScrew Pitch\u003c\/strong\u003e: 2mm\u003cbr\u003e \u003cstrong\u003eLead\u003c\/strong\u003e: 8mm\u003cbr\u003e \u003cstrong\u003eLead Screw Length\u003c\/strong\u003e: 500mm\u003c\/p\u003e"}

{"id":8058575051,"title":"3D PRINTER HEATER CARTRIDGE 12V 40W FOR HOTEND","handle":"3d-printer-heater-cartridge-12v-40w-for-hotend","description":"\u003cp id=\"product-name\" class=\"fn\"\u003eHEATER CARTRIDGE 12V 40W FOR HOTEND\u003c\/p\u003e\n\u003ctable style=\"height: 204px;\" border=\"1\" width=\"631\" cellspacing=\"1\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeature\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless Steel, PVC, Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance\u003c\/td\u003e\n\u003ctd\u003e5 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater size\u003c\/td\u003e\n\u003ctd\u003e6x20mm(D*L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Length\u003c\/td\u003e\n\u003ctd\u003e500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-29T12:23:17-05:00","created_at":"2017-01-29T12:23:17-05:00","vendor":"GENERIC","type":"Parts","tags":["Cartridge","electrical","heater cartridge"],"price":600,"price_min":600,"price_max":600,"available":true,"price_varies":false,"compare_at_price":1100,"compare_at_price_min":1100,"compare_at_price_max":1100,"compare_at_price_varies":false,"variants":[{"id":26393695883,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CRTG-HTR-12V-40W","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D PRINTER HEATER CARTRIDGE 12V 40W FOR HOTEND","public_title":null,"options":["Default Title"],"price":600,"weight":400,"compare_at_price":1100,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"93695883","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-HEATER-CARTRIDGE-12V-40W-FOR-HOTEND-Digitmakers-ca-129.jpg?v=1691538844"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-HEATER-CARTRIDGE-12V-40W-FOR-HOTEND-Digitmakers-ca-129.jpg?v=1691538844","options":["Title"],"media":[{"alt":"3D PRINTER HEATER CARTRIDGE 12V 40W FOR HOTEND Digitmakers.ca","id":32347567325414,"position":1,"preview_image":{"aspect_ratio":0.75,"height":800,"width":600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-HEATER-CARTRIDGE-12V-40W-FOR-HOTEND-Digitmakers-ca-129.jpg?v=1691538844"},"aspect_ratio":0.75,"height":800,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-HEATER-CARTRIDGE-12V-40W-FOR-HOTEND-Digitmakers-ca-129.jpg?v=1691538844","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp id=\"product-name\" class=\"fn\"\u003eHEATER CARTRIDGE 12V 40W FOR HOTEND\u003c\/p\u003e\n\u003ctable style=\"height: 204px;\" border=\"1\" width=\"631\" cellspacing=\"1\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeature\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless Steel, PVC, Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance\u003c\/td\u003e\n\u003ctd\u003e5 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater size\u003c\/td\u003e\n\u003ctd\u003e6x20mm(D*L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Length\u003c\/td\u003e\n\u003ctd\u003e500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":8058612683,"title":"3D PRINTER HEATER CARTRIDGE 24V 40W FOR HOTEND","handle":"3d-printer-heater-cartridge-24v-40w-for-hotend","description":"\u003cp id=\"product-name\" class=\"fn\"\u003eHEATER CARTRIDGE 24 V 40W FOR HOTEND\u003c\/p\u003e\n\u003ctable style=\"height: 295px;\" border=\"1\" width=\"241\" cellspacing=\"1\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeature\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless Steel, PVC, Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater (D*L)Wire Length500mmResistance\u003c\/td\u003e\n\u003ctd\u003esize6x20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater size\u003c\/td\u003e\n\u003ctd\u003e6x20mm(D*L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Length\u003c\/td\u003e\n\u003ctd\u003e500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-29T12:27:06-05:00","created_at":"2017-01-29T12:27:06-05:00","vendor":"GENERIC","type":"Parts","tags":["12 volts","3D parts","3D Printing","Cartridge","electrical","Heater","heater cartridge"],"price":600,"price_min":600,"price_max":600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":26393879115,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CRTG-HTR-24V-40W","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D PRINTER HEATER CARTRIDGE 24V 40W FOR HOTEND","public_title":null,"options":["Default Title"],"price":600,"weight":400,"compare_at_price":null,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":"00001000664","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-HEATER-CARTRIDGE-24V-40W-FOR-HOTEND-Digitmakers-ca-9525.jpg?v=1691538846"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-HEATER-CARTRIDGE-24V-40W-FOR-HOTEND-Digitmakers-ca-9525.jpg?v=1691538846","options":["Title"],"media":[{"alt":"3D PRINTER HEATER CARTRIDGE 24V 40W FOR HOTEND Digitmakers.ca","id":32347567358182,"position":1,"preview_image":{"aspect_ratio":0.75,"height":800,"width":600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-HEATER-CARTRIDGE-24V-40W-FOR-HOTEND-Digitmakers-ca-9525.jpg?v=1691538846"},"aspect_ratio":0.75,"height":800,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-HEATER-CARTRIDGE-24V-40W-FOR-HOTEND-Digitmakers-ca-9525.jpg?v=1691538846","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp id=\"product-name\" class=\"fn\"\u003eHEATER CARTRIDGE 24 V 40W FOR HOTEND\u003c\/p\u003e\n\u003ctable style=\"height: 295px;\" border=\"1\" width=\"241\" cellspacing=\"1\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeature\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless Steel, PVC, Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater (D*L)Wire Length500mmResistance\u003c\/td\u003e\n\u003ctd\u003esize6x20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater size\u003c\/td\u003e\n\u003ctd\u003e6x20mm(D*L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Length\u003c\/td\u003e\n\u003ctd\u003e500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":8058589771,"title":"3D PRINTER 2004 LCD SMART CONTROLLER DISPLAY","handle":"3d-printer-2004-lcd-smart-controller-display","description":"\u003cp\u003e3D PRINTER REPRAP RAMPS 1.4 2004 LCD SMART CONTROLLER DISPLAY ADAPTER\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe controller includes an SD card reader, rotary encoders and a 20-character x 4 line LCD display.\u003c\/li\u003e\n\u003cli\u003eYou can easily connect it to your RAMPS 1.4 board using \"smart adapter\" (included).\u003c\/li\u003e\n\u003cli\u003e No need to your computer\u003c\/li\u003e\n\u003cli\u003eAll further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller. 3D design print without a computer, just use the G code stored on the SD card designs.\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-01-29T12:24:00-05:00","created_at":"2017-01-29T12:24:41-05:00","vendor":"GENERIC","type":"Parts","tags":["3D Printers Hot end","electrical","LCD"],"price":1500,"price_min":1500,"price_max":1500,"available":false,"price_varies":false,"compare_at_price":2600,"compare_at_price_min":2600,"compare_at_price_max":2600,"compare_at_price_varies":false,"variants":[{"id":26393773067,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CTRL-SMRT-LCD-2004","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"3D PRINTER 2004 LCD SMART CONTROLLER DISPLAY","public_title":null,"options":["Default Title"],"price":1500,"weight":800,"compare_at_price":2600,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"93773067","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-2004-LCD-SMART-CONTROLLER-DISPLAY-Digitmakers-ca-2661.png?v=1691540460"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-2004-LCD-SMART-CONTROLLER-DISPLAY-Digitmakers-ca-2661.png?v=1691540460","options":["Title"],"media":[{"alt":"3D PRINTER 2004 LCD SMART CONTROLLER DISPLAY Digitmakers.ca","id":32347591311590,"position":1,"preview_image":{"aspect_ratio":1.19,"height":453,"width":539,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-2004-LCD-SMART-CONTROLLER-DISPLAY-Digitmakers-ca-2661.png?v=1691540460"},"aspect_ratio":1.19,"height":453,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3D-PRINTER-2004-LCD-SMART-CONTROLLER-DISPLAY-Digitmakers-ca-2661.png?v=1691540460","width":539}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e3D PRINTER REPRAP RAMPS 1.4 2004 LCD SMART CONTROLLER DISPLAY ADAPTER\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe controller includes an SD card reader, rotary encoders and a 20-character x 4 line LCD display.\u003c\/li\u003e\n\u003cli\u003eYou can easily connect it to your RAMPS 1.4 board using \"smart adapter\" (included).\u003c\/li\u003e\n\u003cli\u003e No need to your computer\u003c\/li\u003e\n\u003cli\u003eAll further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller. 3D design print without a computer, just use the G code stored on the SD card designs.\u003c\/li\u003e\n\u003c\/ul\u003e"}