Our Store will be closed on Monday , February 15,  For Family Day. We will reopen on Tuesday. Online Services Will Be Available  !

{"id":8058626699,"title":"High Performance HTPLA -Translucent Colors-1.75 mm)","handle":"high-performance-htpla-translucent-colors-1-75-mm","description":"\u003ch1\u003eHTPLA out performs PLA, ABS, and Polyesters like PET!\u003c\/h1\u003e\n\u003cdiv id=\"full_description\" class=\"rte\"\u003e\n\u003cdiv class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv\u003e\n\u003cstrong id=\"yui_3_17_2_8_1419892303855_3005\"\u003eProto-pasta's HTPLA v2.0 \u003c\/strong\u003eis better than the original kickstarted version. This new formulation is higher performing and lower cost. HTPLA prints similar to standard PLA but is \"Hella Tough\" and can be \"Heat Treated\" for \"Higher Temperature\" resistance. This durable PLA has a theoretical Heat Deflection Temperature (HDT) of more than 140C (285F) after heat treating though in our experience 120C or more was practically attained.  This means HTPLA parts maintain strength and form to much higher temperatures than PLA, ABS, or Polyesters like PET which loose structure as soon as 55C and by 100C.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eHow do you \"Heat Treat\" for maximum performance? Bake your parts into a oven until you see a change from translucent to opaque. Yes, there is an obvious visual change indicating the improved performance! We had good luck in a lab oven at 110C (230F) for an hour or less. We recommend leaving the supports on your parts, placing them on a non-radiating surface (like glass, ceramic, or composite), and letting them cool in the oven to minimize distortion. Parts can be baked at a lower temperature (though must be above 60C for any change to occur) for a longer time with less risk of unwanted deformation.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-yui_3_17_2_1_1417156388310_51937\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv id=\"yui_3_17_2_7_1419892303855_2942\" class=\"sqs-block-content\"\u003e\n\u003cdiv id=\"block-yui_3_17_2_1_1417156388310_298376\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv id=\"yui_3_17_2_8_1419892303855_3003\" class=\"sqs-block-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e Iridescent Ice Color\u003c\/li\u003e\n\u003cli\u003e500g 8\" diameter spool only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo abrasive fillers so expect normal wear with standard nozzles.\u003c\/p\u003e\n\u003cp id=\"yui_3_17_2_8_1419892303855_3029\"\u003eIn our experience, good results were achieved using standard PLA parameters with standard build surface preparation (blue tape, glue stick, or BuildTak). No heated bed required.  Some shrinkage and distortion may occur in the annealing process, so larger or dimension critical parts may need to be scaled larger to compensate or printed in our more stable, lower shrink \u003cstrong\u003eCarbon Fiber\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-02772462f7d22eb6720f\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"828582148\"\u003e\u003c\/div\u003e","published_at":"2017-01-29T12:28:39-05:00","created_at":"2017-01-29T12:28:39-05:00","vendor":"ProtoPasta","type":"Filaments","tags":["1.75mm","3D Printer Filament","Clear","Filament","HTPLA","Iridescent Ice","PLA","Special PLA 1.75 mm","Translucent"],"price":5499,"price_min":5499,"price_max":5499,"available":false,"price_varies":false,"compare_at_price":5499,"compare_at_price_min":5499,"compare_at_price_max":5499,"compare_at_price_varies":false,"variants":[{"id":26393932619,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FL010-HTPLA-Transc-1.75","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"High Performance HTPLA -Translucent Colors-1.75 mm)","public_title":null,"options":["Default Title"],"price":5499,"weight":1000,"compare_at_price":5499,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"640970862026"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/htpla2_grande_1c3107a6-88fb-4668-b913-e1091ab9754e.jpg?v=1575566321"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/htpla2_grande_1c3107a6-88fb-4668-b913-e1091ab9754e.jpg?v=1575566321","options":["Title"],"media":[{"alt":"High Performance HTPLA -Translucent Colors-1.75 mm) - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":94742937636,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/htpla2_grande_1c3107a6-88fb-4668-b913-e1091ab9754e.jpg?v=1568829411"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/htpla2_grande_1c3107a6-88fb-4668-b913-e1091ab9754e.jpg?v=1568829411","width":600}],"content":"\u003ch1\u003eHTPLA out performs PLA, ABS, and Polyesters like PET!\u003c\/h1\u003e\n\u003cdiv id=\"full_description\" class=\"rte\"\u003e\n\u003cdiv class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv\u003e\n\u003cstrong id=\"yui_3_17_2_8_1419892303855_3005\"\u003eProto-pasta's HTPLA v2.0 \u003c\/strong\u003eis better than the original kickstarted version. This new formulation is higher performing and lower cost. HTPLA prints similar to standard PLA but is \"Hella Tough\" and can be \"Heat Treated\" for \"Higher Temperature\" resistance. This durable PLA has a theoretical Heat Deflection Temperature (HDT) of more than 140C (285F) after heat treating though in our experience 120C or more was practically attained.  This means HTPLA parts maintain strength and form to much higher temperatures than PLA, ABS, or Polyesters like PET which loose structure as soon as 55C and by 100C.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eHow do you \"Heat Treat\" for maximum performance? Bake your parts into a oven until you see a change from translucent to opaque. Yes, there is an obvious visual change indicating the improved performance! We had good luck in a lab oven at 110C (230F) for an hour or less. We recommend leaving the supports on your parts, placing them on a non-radiating surface (like glass, ceramic, or composite), and letting them cool in the oven to minimize distortion. Parts can be baked at a lower temperature (though must be above 60C for any change to occur) for a longer time with less risk of unwanted deformation.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-yui_3_17_2_1_1417156388310_51937\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv id=\"yui_3_17_2_7_1419892303855_2942\" class=\"sqs-block-content\"\u003e\n\u003cdiv id=\"block-yui_3_17_2_1_1417156388310_298376\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv id=\"yui_3_17_2_8_1419892303855_3003\" class=\"sqs-block-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e Iridescent Ice Color\u003c\/li\u003e\n\u003cli\u003e500g 8\" diameter spool only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo abrasive fillers so expect normal wear with standard nozzles.\u003c\/p\u003e\n\u003cp id=\"yui_3_17_2_8_1419892303855_3029\"\u003eIn our experience, good results were achieved using standard PLA parameters with standard build surface preparation (blue tape, glue stick, or BuildTak). No heated bed required.  Some shrinkage and distortion may occur in the annealing process, so larger or dimension critical parts may need to be scaled larger to compensate or printed in our more stable, lower shrink \u003cstrong\u003eCarbon Fiber\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-02772462f7d22eb6720f\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"828582148\"\u003e\u003c\/div\u003e"}

High Performance HTPLA -Translucent Colors-1.75 mm)

Product Description
$54.99 CAD
Maximum quantity available reached.

HTPLA out performs PLA, ABS, and Polyesters like PET!

Proto-pasta's HTPLA v2.0 is better than the original kickstarted version. This new formulation is higher performing and lower cost. HTPLA prints similar to standard PLA but is "Hella Tough" and can be "Heat Treated" for "Higher Temperature" resistance. This durable PLA has a theoretical Heat Deflection Temperature (HDT) of more than 140C (285F) after heat treating though in our experience 120C or more was practically attained.  This means HTPLA parts maintain strength and form to much higher temperatures than PLA, ABS, or Polyesters like PET which loose structure as soon as 55C and by 100C. How do you "Heat Treat" for maximum performance? Bake your parts into a oven until you see a change from translucent to opaque. Yes, there is an obvious visual change indicating the improved performance! We had good luck in a lab oven at 110C (230F) for an hour or less. We recommend leaving the supports on your parts, placing them on a non-radiating surface (like glass, ceramic, or composite), and letting them cool in the oven to minimize distortion. Parts can be baked at a lower temperature (though must be above 60C for any change to occur) for a longer time with less risk of unwanted deformation.
  •  Iridescent Ice Color
  • 500g 8" diameter spool only

No abrasive fillers so expect normal wear with standard nozzles.

In our experience, good results were achieved using standard PLA parameters with standard build surface preparation (blue tape, glue stick, or BuildTak). No heated bed required.  Some shrinkage and distortion may occur in the annealing process, so larger or dimension critical parts may need to be scaled larger to compensate or printed in our more stable, lower shrink Carbon Fiber.

Sku: FL010-HTPLA-Transc-1.75
Vendor: ProtoPasta
Get a free quotation for the product of your interest today. Choose from a wide range of 3D Printers , 3D Scanners, 3D Printing Filaments , 3D Resin & 3D Printing parts today ! Contact us today !

Price Match

 Contact us here!

We match all competitors pricing!

You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you're getting honest value for your money.

Price match for retail store

We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor's store or website (including shipping, handling and fees, if applicable within Canada)

Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.

Price match for online only website

If you find an identical item for less at a Canadian online only website, we will match their price (including shipping, handling and fees, if applicable).

How to price match in-store:

When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor's website.

How to price match on DigitMakers.ca

Please Email : Sales@digitmakers.ca

Please make sure you have the following information before contacting us so that we can assist you as quickly as possible:

  • Your full name and phone number
  • The complete URL (web address) of product page on the competitor's website (Canada Only Accepted) 
  • Details of the product name, brand and model
  • Details of the price difference (including shipping, handling and other fees, if applicable)

 

Our goal is to provide everyday low prices on all of our Items 

Related Products