Your cart is empty
Looks like you haven't added anything to your cart yet
|
White | ||
|
Black | ||
|
Blue | ||
|
Gray | ||
|
Red |
Recommended Printing Settings
| Drying Settings (Blast Drying Oven) | 55 °C，8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 190 - 230 °C |
| Bed Temperature (with PVP Glue) | 35 - 45 °C |
| Printing Speed | < 300 mm/s |
Physical Properties
| Density | 1.24 g/cm³ |
| Vicar Softening Temperature | 57 °C |
| Heat Deflection Temperature | 57 °C |
| Melting Temperature | 160 °C |
| Melt Index | 42.4 ± 3.5 g/10 min |
Mechanical Properties
| Tensile Strength | 35 ± 4 MPa |
| Breaking Elongation Rate | 12.2 ± 1.8 % |
| Bending Modulus | 2750 ± 160 MPa |
| Bending Strength | 76 ± 5 MPa |
| Impact Strength | 26.6 ± 2.8 kJ/m² |
Printing Tips
• Drying PLA Basic is optional. Recommended drying condition is 50 ℃ for 8 hours in a blast drying oven, and 70 ℃ for 12 hours on printer's heatbed. Learn more about filament drying. Please refer to Filament drying cover on WIKI.
What's in the Box:
Filament *2 Package*1
No reviews yet.
- Choosing a selection results in a full page refresh.