Filaments Depot Gradient PLA Tricolor - 1.75mm 1kg

NON-BRITTLE FORMULA

Filaments Depot Gradient PLA is made from quality virgin PLA. Both PLA resin and colorant are food-grade material. 

Made in Ontario, Canada using sophisticated extrusion equipment and high-tech drying technology, the filaments are monitored with live multi-axis micrometer, and computerized diameter monitoring technology, producing clean, repeatable and reproducible results.

There is an approximate 50g transition from one color to the next.

For best results, print larger and more dense objects to allow transition to occur. 

  PLA can be printed with or without a heated print bed. However, if your 3D printer does have a heated bed, it is recommended that you set your bed temperature to approximately 60°C.

First layer usually 5°C-10°C higher than subsequent layers. PLA Gradient also sticks well to Glass with PVA Glue ,BuildTak, PEI, or blue tape.

To make it compatible with Bambu Lab AMS, you can use these Cardboard Spool Ring. 

Downloads

Filaments Depot PLA MSDS

No reviews yet.