PLA DUAL COLOR

We are transitioning from cardboard to plastic spools. Depending on the availability, you may get either a plastic or cardboard spool.  

Filaments Depot PLA Dual Color is made from quality virgin PLA. Both PLA resin and colorant are food-grade material. 

Made in Ontario, Canada using sophisticated extrusion equipment and high-tech drying technology, the filaments are monitored with live multi-axis micrometer, and computerized diameter monitoring technology, producing clean, repeatable and reproducible results.

For best results, print larger and more dense objects to allow transition to occur. 

For the CMY Version, colors may vary with each spool and the black part can interchange with the gradient during prints. 

 PLA can be printed with or without a heated print bed. However, if your 3D printer does have a heated bed, it is recommended that you set your bed temperature to approximately 60°C.

First layer usually 5°C-10°C higher than subsequent layers. PLA Gradient also sticks well to Glass with PVA Glue ,BuildTak, PEI, or blue tape.

To make it compatible with Bambu Lab AMS, you can use these Cardboard Spool Ring. 

Downloads

Filaments Depot PLA MSDS