{"id":8194324939,"title":"E3D Volcano Starter Pack - 1.75mm-12\/24 volts","handle":"genuine-e3d-v6-volcano-starter-pack-1-75mm","description":"\u003cp\u003eHotends have the new heater block and thermistor cartridge introduced in June 2016.\u003c\/p\u003e\n\u003cp\u003eVolcano documentation can be found \u003ca href=\"http:\/\/wiki.e3d-online.com\/wiki\/E3D-v6_(Volcano)_Documentation\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVolcano - Print Faster, Stronger, Bigger.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEverything you need to start exploring large format 3D-Printing! The Starter Pack is an add on for your E3D HotEnd to boost the speed of printing with vastly increased melt rates and epic layer adhesion. Another fun addition to the E3D ecosystem, and fully compatible with all E3D HotEnds except Cyclops.\u003c\/p\u003e\n\u003cp\u003eThe Starter Pack gives you an easy way to upgrade your HotEnd to use a high flow 0.80mm nozzle. This kit contains all the parts you need to upgrade your HotEnd to Volcano, including electronics and fixings. \u003c\/p\u003e\n\u003cp\u003eAn economical and simple way to get started with volcano.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eVolcano is E3D's answer to slow printing. If you want large parts, in less than half the time, with dramatically increased strength then Volcano is what you need.  Volcano enables you to print at high layer heights, through large nozzles, and extrude much more plastic per second. This results in dramatically reduced print times.  In addition to reduced print time the large traces of filament printed by Volcano bond to one another with greatly improved strength. This results in parts that are extremely strong and feel much more solid than standard prints. \u003c\/p\u003e\n\u003cp\u003ePrinters are getting larger and the objects that can be printed are getting larger too. However, as prints get bigger the time taken to print these objects increases exponentially. Volcano makes huge printers viable, and manufacturing large objects much more efficient by slashing print times by more than half compared to standard printing.  By combining speed and strength Volcano makes it possible to print objects a whole new class of objects like shelf brackets, large scale RepRap machines, and even furniture.   Just because parts are printed with large layers doesn't mean that they are going to be inaccurate or ugly. To the contrary the large layers give a very smooth appearance, with great gloss. With a correctly calibrated machine you can stil hit part accuracies of +\/- 0.1mm.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFurther documentation can be found at \u003c\/span\u003e\u003ca href=\"http:\/\/wiki.e3d-online.com\/wiki\/E3D-v6_(Volcano)_Documentation\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ewiki.e3d-online.com\/wiki\/E3D-v6_(Volcano)_Documentation\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine unassembled E3D Volcano Starter Kit - 1.75mm filament;\u003c\/li\u003e\n\u003cli\u003e12V 30W  heater cartridge\u003c\/li\u003e\n\u003cli\u003e0.8mm brass nozzle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-02-22T14:22:00-05:00","created_at":"2017-02-22T17:46:32-05:00","vendor":"E3D","type":"Parts","tags":["e3D","e3d v6","e3d volcano starter pack","heat block","hotend","volcano starter pack"],"price":4400,"price_min":4400,"price_max":4400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36630667362466,"title":"12V","option1":"12V","option2":null,"option3":null,"sku":"E3D-Volcano-start-1.75-Pack-12V","requires_shipping":true,"taxable":true,"featured_image":{"id":16815312459,"product_id":8194324939,"position":1,"created_at":"2017-02-22T17:49:23-05:00","updated_at":"2021-02-16T00:22:02-05:00","alt":"Genuine E3D Volcano Starter Pack - 1.75mm-12\/24 volts - Digitmakers.ca","width":1000,"height":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Volcano-Parts4.jpg?v=1613452922","variant_ids":[36630667362466,36630667395234]},"available":true,"name":"E3D Volcano Starter Pack - 1.75mm-12\/24 volts - 12V","public_title":"12V","options":["12V"],"price":4400,"weight":1000,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"67362466","featured_media":{"alt":"Genuine E3D Volcano Starter Pack - 1.75mm-12\/24 volts - Digitmakers.ca","id":97981530148,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Volcano-Parts4.jpg?v=1613452922"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":36630667395234,"title":"24V","option1":"24V","option2":null,"option3":null,"sku":"E3D-Volcano-start-1.75-Pack-24V","requires_shipping":true,"taxable":true,"featured_image":{"id":16815312459,"product_id":8194324939,"position":1,"created_at":"2017-02-22T17:49:23-05:00","updated_at":"2021-02-16T00:22:02-05:00","alt":"Genuine E3D Volcano Starter Pack - 1.75mm-12\/24 volts - Digitmakers.ca","width":1000,"height":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Volcano-Parts4.jpg?v=1613452922","variant_ids":[36630667362466,36630667395234]},"available":true,"name":"E3D Volcano Starter Pack - 1.75mm-12\/24 volts - 24V","public_title":"24V","options":["24V"],"price":4400,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"7053285651","featured_media":{"alt":"Genuine E3D Volcano Starter Pack - 1.75mm-12\/24 volts - Digitmakers.ca","id":97981530148,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Volcano-Parts4.jpg?v=1613452922"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/Volcano-Parts4.jpg?v=1613452922"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Volcano-Parts4.jpg?v=1613452922","options":["Size"],"media":[{"alt":"Genuine E3D Volcano Starter Pack - 1.75mm-12\/24 volts - Digitmakers.ca","id":97981530148,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Volcano-Parts4.jpg?v=1613452922"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Volcano-Parts4.jpg?v=1613452922","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHotends have the new heater block and thermistor cartridge introduced in June 2016.\u003c\/p\u003e\n\u003cp\u003eVolcano documentation can be found \u003ca href=\"http:\/\/wiki.e3d-online.com\/wiki\/E3D-v6_(Volcano)_Documentation\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVolcano - Print Faster, Stronger, Bigger.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEverything you need to start exploring large format 3D-Printing! The Starter Pack is an add on for your E3D HotEnd to boost the speed of printing with vastly increased melt rates and epic layer adhesion. Another fun addition to the E3D ecosystem, and fully compatible with all E3D HotEnds except Cyclops.\u003c\/p\u003e\n\u003cp\u003eThe Starter Pack gives you an easy way to upgrade your HotEnd to use a high flow 0.80mm nozzle. This kit contains all the parts you need to upgrade your HotEnd to Volcano, including electronics and fixings. \u003c\/p\u003e\n\u003cp\u003eAn economical and simple way to get started with volcano.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eVolcano is E3D's answer to slow printing. If you want large parts, in less than half the time, with dramatically increased strength then Volcano is what you need.  Volcano enables you to print at high layer heights, through large nozzles, and extrude much more plastic per second. This results in dramatically reduced print times.  In addition to reduced print time the large traces of filament printed by Volcano bond to one another with greatly improved strength. This results in parts that are extremely strong and feel much more solid than standard prints. \u003c\/p\u003e\n\u003cp\u003ePrinters are getting larger and the objects that can be printed are getting larger too. However, as prints get bigger the time taken to print these objects increases exponentially. Volcano makes huge printers viable, and manufacturing large objects much more efficient by slashing print times by more than half compared to standard printing.  By combining speed and strength Volcano makes it possible to print objects a whole new class of objects like shelf brackets, large scale RepRap machines, and even furniture.   Just because parts are printed with large layers doesn't mean that they are going to be inaccurate or ugly. To the contrary the large layers give a very smooth appearance, with great gloss. With a correctly calibrated machine you can stil hit part accuracies of +\/- 0.1mm.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFurther documentation can be found at \u003c\/span\u003e\u003ca href=\"http:\/\/wiki.e3d-online.com\/wiki\/E3D-v6_(Volcano)_Documentation\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ewiki.e3d-online.com\/wiki\/E3D-v6_(Volcano)_Documentation\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine unassembled E3D Volcano Starter Kit - 1.75mm filament;\u003c\/li\u003e\n\u003cli\u003e12V 30W  heater cartridge\u003c\/li\u003e\n\u003cli\u003e0.8mm brass nozzle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e"}

E3D Volcano Starter Pack - 1.75mm-12/24 volts

Product Description
$44.00
Maximum quantity available reached.

Hotends have the new heater block and thermistor cartridge introduced in June 2016.

Volcano documentation can be found here.

Volcano - Print Faster, Stronger, Bigger.

Everything you need to start exploring large format 3D-Printing! The Starter Pack is an add on for your E3D HotEnd to boost the speed of printing with vastly increased melt rates and epic layer adhesion. Another fun addition to the E3D ecosystem, and fully compatible with all E3D HotEnds except Cyclops.

The Starter Pack gives you an easy way to upgrade your HotEnd to use a high flow 0.80mm nozzle. This kit contains all the parts you need to upgrade your HotEnd to Volcano, including electronics and fixings. 

An economical and simple way to get started with volcano.


Volcano is E3D's answer to slow printing. If you want large parts, in less than half the time, with dramatically increased strength then Volcano is what you need.  Volcano enables you to print at high layer heights, through large nozzles, and extrude much more plastic per second. This results in dramatically reduced print times.  In addition to reduced print time the large traces of filament printed by Volcano bond to one another with greatly improved strength. This results in parts that are extremely strong and feel much more solid than standard prints. 

Printers are getting larger and the objects that can be printed are getting larger too. However, as prints get bigger the time taken to print these objects increases exponentially. Volcano makes huge printers viable, and manufacturing large objects much more efficient by slashing print times by more than half compared to standard printing.  By combining speed and strength Volcano makes it possible to print objects a whole new class of objects like shelf brackets, large scale RepRap machines, and even furniture.   Just because parts are printed with large layers doesn't mean that they are going to be inaccurate or ugly. To the contrary the large layers give a very smooth appearance, with great gloss. With a correctly calibrated machine you can stil hit part accuracies of +/- 0.1mm.

Further documentation can be found at wiki.e3d-online.com/wiki/E3D-v6_(Volcano)_Documentation

Package contents:

  • Genuine unassembled E3D Volcano Starter Kit - 1.75mm filament;
  • 12V 30W  heater cartridge
  • 0.8mm brass nozzle

 

Sku: E3D-Volcano-start-1.75-Pack-12V
Vendor: E3D
Get a free quotation for the product of your interest today. Choose from a wide range of 3D Printers , 3D Scanners, 3D Printing Filaments , 3D Resin & 3D Printing parts today ! Contact us today !

Price Match

 Contact us here!

We match all competitors pricing!

You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you're getting honest value for your money.

Price match for retail store

We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor's store or website (including shipping, handling and fees, if applicable within Canada)

Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.

Price match for online only website

If you find an identical item for less at a Canadian online only website, we will match their price (including shipping, handling and fees, if applicable).

How to price match in-store:

When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor's website.

How to price match on DigitMakers.ca

Please Email : Sales@digitmakers.ca

Please make sure you have the following information before contacting us so that we can assist you as quickly as possible:

  • Your full name and phone number
  • The complete URL (web address) of product page on the competitor's website (Canada Only Accepted) 
  • Details of the product name, brand and model
  • Details of the price difference (including shipping, handling and other fees, if applicable)

 

Our goal is to provide everyday low prices on all of our Items 

Related Products