Your cart is empty
Looks like you haven't added anything to your cart yet
|
Natural | ||
|
Urban Grey |
About PC Blend
Prusament PC Blend (PolyCarbonate) is the perfect material for stronger, more durable 3D prints.
Polycarbonates are a group of plastics that are known for their strength, mechanical durability, toughness, and temperature resistance. They are commonly used for the production of CDs, protective goggles, or car headlights.
The composition of pure polycarbonate is a material not suitable for 3D printing. It adheres very poorly to the print sheet, and due to its high thermal expansion, it has a tendency to deform and crack. We have added carefully-picked additives into the mix, improving the adhesion and reducing cracking and warping, while still maintaining the excellent properties of polycarbonate.
Prusament PC Blend is suitable for advanced users. If you are new to 3D printing, we recommend you to stick with easier to print materials such as PLA and PETG. PC Blend is recommended for experienced 3D printer owners looking for tough, durable material for production of prototypes and functional parts, thermally and mechanically stressed components.
Print sheet preparation
Prusament PC Blend can be printed on both smooth and textured print sheets. However, it’s required to spread a separating agent on the sheet before you start printing, otherwise the adhesion of the print may be too strong. The best way to prepare your print sheet is to apply a thin layer of paper glue onto the sheet. Failing to add a separating layer may lead to the damage to your print sheet!
After you finish printing and remove the object from the print sheet, use isopropyl alcohol to clean the print sheet thoroughly! Avoid cleaning the textured sheet with water - it may lead to corrosion.
Printing Setup
| Nozzle | 275±10 °C |
| Heatbed | 110±10 °C |
Basic Attributes
|
Styrene free |
Large models have a tendency to warp |
||
|
High temperature resistance up to 113°C |
Requires high heatbed and nozzle temperatures |
||
|
Good dimensional stability in comparison with other PC filaments |
Higher price | ||
|
High impact and wear resistance |
Produces minor odors during printing |
||
|
Prints don't deform under pressure over time |
|||
|
Low warping, layer cracks are very rare |
|||
|
Very low moisture absorption |
Notes
This PC Blend is made in-house by Prusa Research.
1.75 mm filament is manufactured with a precision of ±0.03 mm.
Prusament PC Blend has a new formula since 9. 6. 2021 The material density is now slightly lower than before, resulting in a minimal spool weight of 970 g. The approximate length of the filament is 330 m - the same length as the standard Prusament.
To dry the filament, please follow the instructions in this article
No reviews yet.
- Choosing a selection results in a full page refresh.