Your cart is empty
Looks like you haven't added anything to your cart yet
Speed and Precision
- High-speed motors, up to 800mm/s
- Up to 2.5x faster than standard stepper motors
- Higher wattage for cutting thick materials
- Up to 1,000 DPI
Extra Features
- Dual-stage air assist: Different air pressures for engraving vs cutting
- Dual Red-Dot focus, Red Dot Pointer, fullly lit LED interior.
- Built in Camera
- Smart Controller turns air and exhaust on/off with each job
- Great for production runs
- Lots of power for high-efficiency cutting
- 90w tube cuts up to 3/4" wood ro 1" acrylic
- Works with tumblers and curved items (Rotary may be required)
- Easy controls for smooth use
- Hybrid-servo motors for lightening fast processing times
- 1GB of storage for big files
- Optional CSA Electrical certification ( we are one of the only ones in the industry that offer this!)
Durability
- Durable gantry ensures high-quality engravings
- Industrial-grade chiller included
- Water Alarm + other safety features
All-enclosed Design
- 28" wide work area
- Motorized Z-Table fits up to 10.23" tall parts
- Tinted tempered glass window
What's Included?
| Included | Required | Optional |
| Laser + Cart | Computer | Rotary |
| Exhuast Fan | Wall vent for ventilation | Air smoke purifier |
| Exhaust Hose | Air compressor | 1" lens |
| Lightburn Pro | Coolant/Water for chiller | 1.5" lens |
| S&A CW5000 Chiller | 2.5" lens | |
| Tool Kit | 4" lens | |
| Honeycomb and Knife bed | ||
| 2" laser head/lens | ||
| Shipping/Delivery |
Technical Specs
| Engraving / Working Area | 27.56″ x 19.68″ x 10.23″ (700 mm x 500 mm x 260mm) |
| Max Part Size | Pass through closed: 28.9″ x 22.9″ x 10.23″ Pass through open: 28.9″ x ∞” x 1.8″ |
| Laser Wattage | 90 Watt |
| Controller Memory Capacity | Multiple file storage up to 1GB |
| Laser Source | Sealed RECI Co2 glass tube, tested to pass quality control. Average lifespan is 5000-10,000 working hours |
| Electrical Requirements | Standard 120v AC 60 HZ Single phase, dedicated 20 Amp circuit |
| Air Assist | Dual air assist control, air compressor required 2 gallon or larger |
| Machine Size | With cart 56.37" x 37" x 45.27"/ With out cart 56.37" x 37" x 24.8" (L x W x H) 370 Lbs / 168 Kgs |
| Software | LightbBurn Pro software included for use up to three computers, import any graphics file. Compatible with Windows, Mac and Linux |
| Training | Two hour remote setup training included, or local setup/training if within local delivery radius |
| Red Dot Pointer | Shows where laser will fire, allows for " dry run" and for easy origin positioning |
| Camera | Optional camera allows you to see materials on the laser work bed via LightBurn for alternate posistioning |
| Operating Modes | Optimized raster, vector or combined modes |
| Easy Adjustable Home | When items are not easily placed at the top corner of the laser, you can set a new home/origin position |
| Motion Sytem | 2 Phase motors with speeds up to 800mm/s |
| Resolution | Up to 1000 Dpi with appropriate lens |
| Safety | Open door protection with By-pass key switch, water protection system (low water/ over heat) |
| Focus System | Dual red-dot focus system, which allows for quick and easy focus |
| Water Chiller | S&A CW5000 Chiler |
| Ventilation | 400 cfm 6" exhaust fan + 16' of 6" flexible hose, 6" exhuast port located lower rear center of laser. |
| Motorized bed | Includes a removable honeycomb bed w/ locating pins & solid aluminum blade/ knife style bed |
| Laser Heads | 2" head/lens included, optional ( 1.5", 2.5" and 4" available ) |
| Support | Free lifetime Canadian based support, with a average response time of 10 minutes Monday-Sunday 7am-9pm EST |
Material Chart
| Material | Engrave | Cut |
| Wood | ✓ | ✓ |
| MDF | ✓ | ✓ |
| Plywood | ✓ | ✓ |
| Acrylic | ✓ | ✓ |
| Wood Veneer | ✓ | ✓ |
| Pressboard | ✓ | ✓ |
| Melamine | ✓ | ✓ |
| Coated Metals | ✓ | ✕ |
| Glass | ✓ | ✕ |
| Leather/Leatherette | ✓ | ✓ |
| Cloth | ✓ | ✓ |
| Textiles | ✓ | ✓ |
| Marble | ✓ | ✕ |
| Ceramic | ✓ | ✕ |
| Slate/Stone | ✓ | ✕ |
| Mother Of Pearl | ✓ | ✓ |
| Tile | ✓ | ✕ |
| Corian | ✓ | ✓ |
| Laser Grade Plastic | ✓ | ✓ |
| Delrin | ✓ | ✓ |
| Rubber | ✓ | ✓ |
| Mylar | ✓ | ✓ |
| Fiberglass | ✓ | ✓ |
| Cork | ✓ | ✓ |
| Anodized Metal | ✓ | ✕ |
| Painted Metals | ✓ | ✕ |
| Stainless Steel | * | ✕ |
| Brass | * | ✕ |
| Aluminum | * | ✕ |
| Bare Metals | * | ✕ |
* Bare Metals require a spray coating , Co2 lasers will not directly mark bare metal products.
No reviews yet.
- Choosing a selection results in a full page refresh.