Wanhao Duplicator 9 Adjustment Process
Wanhao Duplicator 9 has very rigid structure . During shipping the vslot wheels tension-er might get loose and result in prints finish issues .
In this post we will provide step by step guide on how to set the wanhao D9 to get great prints .
1- Check the the vslot wheels for the y, x and z axis by moving them sideways and see if they are loose or too tight the screw set --marked with arrows in Fig(1) --as required .
2- Loose the z axis lead screw nut by loosing the four screw marked below both sides . This way any binding in the z-axis will not affect the print quality (see Fig.(2))
3- Remove the tension springs off the belt and readjust the x-axis and y-axis belts as shown (Fig.3)
Our 3d printers makes amazing quality !
- DigitMakers Team