Bambu Lab Support for PA/PET 1.75mm - 500g Breakaway Support (formerly 'Support G')
Bambu Lab Support for PA/PET 1.75mm - 500g Breakaway Support (formerly 'Support G')
Bambu Lab Support for PA/PET 1.75mm - 500g Breakaway Support (formerly 'Support G')
Bambu Lab Support for PA/PET 1.75mm - 500g Breakaway Support (formerly 'Support G')

Bambu Lab Support for PA/PET 1.75mm - 500g Breakaway Support (formerly 'Support G')

$50.99

Stock Notification

Get notified when this product is available again
SKU: S03-G1-1.75-500-SPL

 

Bambu Lab Support for PA/PET 

Bambu Support for PA/PET is a breakaway support specially developed for PA, PET and their carbon fiber reinforced composites.

Product Features

  • Easy removal by hand
  • Perfect support interface
  • Recommended for PAHT-CF, PA6-CF, PET-CF, PA-GF, etc.
  • Comes with High Temperature Reusable Spool
  • Diameter: 1.75mm +/- 0.03mm


Cautions for Use

  • ONLY used for support interface
  • Not used for printing models alone
  • Dry out before use
  • AMS compatible

Color: Green

Recommended Printing Settings

Drying Settings (Blast Drying Oven) 80 °C，12h
Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Nozzle Temperature 260 - 290 °C
Bed Temperature (with PVP Glue) 80 - 110 °C
Printing Speed < 100 mm/s

Physical Properties

Density 1.17 g/cm³
Vicar Softening Temperature N / A
Heat Deflection Temperature N / A
Melting Temperature 255 °C
Melt Index 29.2 ± 2.1 g/10 min

Mechanical Properties

Tensile Strength N / A
Breaking Elongation Rate N / A
Bending Modulus N / A
Bending Strength N / A
Impact Strength N / A


 Download Filament TDS

 Download Filament MSDS

What's in the Box

Filament with Spool*1 & Desiccant*1

Filament Label*1

Package*1

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

Attribute Comparison

Support for PLA Support for PA/PET
Color White Green
Nozzle Temperature 210-230°C 270-290°C
Bed Temperature 35-45°C 80-100°C
Print Speed <200mm/s <100mm/s
Water Soluble No No
Recommended for PLA PA-CF, PA-GF, PET-CF
Cannot be used with PA-CF, PA-GF, PET-CF, ABS, PETG, TPU, ASA

PLA, ABS, PETG, TPU, ASA

 

1. Support filament cannot be used to print an item alone, but only to print the supporting portion of that item. AMS is recommended for multi-material printing with Bambu Support filament.

2. Bambu Support filament can only be used with compatible temperatures and filament types. Failure to follow these guidelines can lead to clogs or other issues.

No reviews yet.

Recommended for You

Browsing history

Request a Quotation

Book a Demo