ESUN eSmooth 3D filament 1.75 mm 0.5kg

• Can be polished by using alcohol
• Translucent, white appearance
• Non-toxic, tough, hard to break, good temperature resistance and creep resistance
• Good print precision, no warping, stripping or stringing
• Environmentally friendly, stable performance, more refined and brighter after polishing, complete decomposition, no carbonation and no residue in 600 ℃, can be used for metal casting.

Print Settings

• Best print temperature: 190-210℃
• Bed temperature: 45-55℃
• Feed rate: 30-90mm/s
• Idling speed: 90-150mm/s

Please note: eSmooth is easy to absorb moisture, so better drying before print. Remember to choose an ethanol solution over 99.7% purity and work with a spray type polisher for polishing.

When polishing:

• Hang the prints in the air to make a full contact with ethanol vapour. The whole process takes 20-30 minutes.

After polishing:

• The prints normally turn white and soft. Just use tweezers or other tools for air drying. Do not touch by bare hands.
• To achieve best polishing effect, 3-5 days air drying will volatilise solvent on surface and form a hardened layer. Do not dry with oven, or the solvent will volatilise and destroy polishing effect.