Your cart is empty
Looks like you haven't added anything to your cart yet
Glow in the Dark Luminous Rainbow PLA Filament by eSUN
eSUN's Luminous Rainbow PLA has the easy printing characteristics of PLA combined with gorgeous luminous rainbow appearance. PLA is a biological material refined from corn grains and naturally degradable without affecting the environment. Compared with ABS, PLA does not require a closed chamber, has low shrinkage, no warping, no cracking, and can print large models without irritating odors during printing.
Printing Properties
- Gorgeous luminous star appearance
- Absorb energy during the day and glow at night
- Excellent printability, and layer adhesion, no warping
Product Parameters
Physical performance indicators
| 3D PRINTING FILAMENT | Test Method | PLA |
| Melt Flow Index (g/10min) | GB/T 3682-2000 | 3.5(190℃/2.16kg) |
| Density | GB/T 1033-86 | 1.2g/cm3 |
| IZOD Impact Strength (kJ/㎡） | GB/T 1843-96 | 5.4kJ/m2 |
| Tensile Strength (MPa） | GB/T 1040-92 | 72MPa |
| Elongation at Break (%) | GB/T 1040-92 | 11.8% |
| Flexural Strength (MPa) | GB/T 9341-2000 | 90MPa |
| Flexural Modulus (MPa) | GB/T 9341-2000 | 1915MPa |
| Heat Distortion Temp | GB/T 1634-2001 | 53℃ |
Print Settings
| Filament | Settings |
| Recommended printing temperature | 210-230℃ |
| Bed | 45-60℃ (Masking paper, PVP solid glue, glass board, carbon fiber board, PEI) |
| Fan | 100% |
| Printing speed | 40-100mm/s |
Precautions
Luminous filaments are very easy to grind nozzles and extruder gears. It is recommended to use hardened steel nozzles or ruby nozzles. Hardened steel extruder gears can be selected if possible. If the throat printing time is long, it needs to be replaced.
- Choosing a selection results in a full page refresh.