Your cart is empty
Looks like you haven't added anything to your cart yet
F1+ Blend is the blend especially made for the formlabs Form1 and Form1+ printers.
The F1+ Blend is available in four colours: Clear, White, Grey and Black.
The F1+ is not only compatible with the machine but also with the Formlabs PreForm software. Just choose the appropriate colour and the V01 setting. Then Dial in the layer height. Because of the very high detail of the blend, especially the Black version, astonishing detailed results are achievable at 0.05 and 0.02mm layer height.
The F1+ blends are compatible with our pigments. Depending on the pigments added, you might have to choose a differend colour setting in the PreForm software this might take some experimenting. Lighter colours need lighter colour settings in the software. Beware,the darker settings in the software makes the machine emit more energy, so don't use the Black setting for a Clear/transparent colour.
Resin Properties
All Fun To Do resins are designed to be ultra fast!
Curing times of 0.5 seconds for 0.02mm layers are easily achieved on standard DLP printers with an average light source of around 240Watts.
A broad range of reactivity!
The resin have a very broad range of reactivity. It extends from the very short wavelengths of 225nm, to the near/visible wavelengths of 415nm. By incorporating a very smart blend of photo initiators and sensitizers, almost any light source can be used to initiate the polymerization process of our resins. No need to modify your expensive DLP projector! Do you have a laser SLA machine, or perhaps a DLP printer with a LED source of illumination? As long as the wavelength is between 225nm and 415nm, it will work, and it will work fast!
Besides the wavelength of the light source several other factors are important, so please check out the properties page. If you are in doubt if your specific machine is compatible with our resins, just send an e-mail to Fun To Do.
The Fun To Do resins have an ultra low shrinkage!
Where 3.5% is regarded little shrinkage, they have the limited the shrinkage to 0.5%.
It is basically what you see is what you get. 3.5% seems to be little but if you take an object of 10cm (100mm) 3.5% is 3.5 mm which is nearly half a centimetre! This is huge compared to the 0.5mm the Fun To Do Resins achieve.
A natural resistance to water and most chemicals!
Fun To Do resins have a natural resistance against water - in liquid form it is highly hydrophobic. Once fully cured there is hardly any chemical that can dissolve Fun To Do resins. The Industrial blend has a high resistance to chemicals. Cured prints have been withstanding the elements and various chemicals for several years now! To see which chemicals have been tested click here
User Friendliness makes you want to build more!
When designing the resins we have spent quite some effort in making the resin as user friendly as possible. These efforts have resulted in a series of low odor resins with minimal skin irritation.
Affordable resins make it possible for you to build more!
By using our affordable resin you can afford to experiment, extend your knowledge about supports, exposure times, material thickness without having to think about the costs of the materials all the time.
More technical details and properties
Experience
Years of studying and practising poly chemistry in various disciplines really pays off in the design of practical and affordable resins. Fun To Do resins are not only used in the DLP 3D printing world, but are also popular in the SLA industry.
- Rapid Prototyping
- Automotive industry
- Architecture
- Modelling
- Toy and Game industry
- Production
- Dental industry
Package contents:
- 1kg of Fun To Do F1+ Blend resin
No reviews yet.
- Choosing a selection results in a full page refresh.